hi all..
I recently upgraded my imate jam untouched rom to taxist's rom with radio 1.13 from dutch T-mobile... installed the rom with all the updates and fixes.. the upgrade went well, but there's only 1 glitch.. after I receive a phone call and switch off the phone, it will turn itself on again after about 30 secs.. this is highly annoying since more the once the phone redialed the last number while it was in my pocket... what is causing this? how can I fix it?
thanks..
Related
Hi all,
I bought my MDA Compact a month and a half ago but have noticed some really annoying issues with it.
I have set the phone to turn off if I dont use it for more than 1 minute to save battery. even so i should still be able to receive msgs and calls. well I dont, they go straight to voicemail. I cant make calls either properly when i turn it back on.
also, if i have it on and havent used it for a while (20 mins or so) then i cant make a call, it just freezes. it seems like a problem with the software (comparable to a PC freezup)...
but i dont understand why it stops receiving calls and msgs when it has full signal
here are my ROM details, maybe I need to get a new ROM? or should I take it back to the shop? I got it as an upgrade on T-Mobile so I imagine they won't give me much help.
Thanks guys,
-Neil.
rom version: 1.12.00WWE
rom date: 05/28/05
radio version: 1.12.00
protocol version: 1337.42
extROM version: 1.12.152 WWE
Hi !
I have the same troubles since changing powersave settings to 1 minute. Did you get any answers ? I set the settings now back to default, hope it will work again.
By,
Gerhard
I Had the same problem, Updating the ROM version solved it.
hi,
i took it to the T-mobile shop I purchased it from and they said it was quite a usual problem. they will send it to get fixed under warranty and if need be will replace it with a new one. only problem is that it will be gone for 3-4 weeks... :-(
yes seems like a software issue in the end though... hope it works when it comes back!
cheers
Hey guys. I decided that I was going to try upgrading to the latest radio 1.50 the other day. And after having a few problems with missing calls I decided to go down to the last newest one. Well same problems. So I basically just worked my way back to 1.41 which I was using before I upgraded
Still had a few of the same problems. Not that many.
So now I went up to 1.43 and so far so Good. But I noticed that when I dial my own number it waits an very unusually long time until it starts to ring.
Wondering if you guys have any suggestions. It screwed me over last night as I was supposed to pick somebody up from the airport and never got any calls because of it.
Thanks
I am using
HTC Official WM6 Rom
1.43 Radio
Cingular 8525
Just tried Hard Reset and still same problem.
I've searched the board alot and havent really found this before.
The phone Rings right away when I hear the other phone ringing.
but when i dial the number there is a good 6 second delay until it actually starts ringing.
hrmm... i try to convince myself "if it aint broke, dont fix it" but when i see new radios and roms coming out I get excited, but now this just gives me more of a reason to stop messing around.
Hi all
I am new to this forum. And recently a problem puzzled me. My mobile phone is softbank x01ht. rom version is QSX2.1 and radio version is 1.54.07.00. Sometimes phone can't dial in and out however the signal display is full. It occurs often these days. when i turn off power and on, it returned to normal. Any one can help?
still wait the answer!
sounds like yer radio is going going going.............gone
but today it works well. I don't know when this problem will happen next time.
Hope never happen!
Hi, hope not to disturb you guys with this new thread but I really have a crazy problem on my device: for about a week it looses signal from time to time,especially when in 3g network coverage. Not so strange till now, but I have this issue : during a phone call I suddenly stop hearing the other and the call counter keeps working. It just doesn't want to stop no matter what I press ( red hardware button, touch end call key etc) !! So the call remains active unless I reset the device or wait for about 3 minutes when the call finally stops and the phone looses it's signal for few seconds and finds it again... so I can speak with someone for 20 seconds or more and the thing that I described happens...imagine how ugly is this.
What could it be? is it a hardware problem? I flashed another rom and radio but the problem persisted. Someone reported me a similar issue on his tytn 2 but he solved with a new rom and radio. For me it didn't work
I have two more problems but will describe them later, hope to get some response on this one first...
Regards
What rom do you have flashed, what radio rom, and what carrier are you on?
Have you flashed HardSPL/CID/sim unlocked?
Also: Have you tried the shipped (stock) rom/radio?
If it stays with more than one rom/radio rom, it might be a hardware problem.
Yes, flashed hardspl, sim and CID unlock long time ago. I currently have Schap's 4.30 ( previously had Schap's 4.31) and radio 1.47.30.10 ( had 1.56... don't remember exactly). What's 'shipped' rom/radio?
I think I'll try one or two roms/radio and if it persists...that's it...may it rest in peace.
The roms the carriers put out, see here:
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
And, if it keeps up with different roms and radios, then, it probs is RIP, maybe look around the forum to see if there's a hardware fix.
Hello! 1 hour ago I discovered another problem with my Qtek 9100. My phone was ringing, but the display was showing nothing, no incoming call, nothing at all. The phone had resumed from stand-by and in the bottom left corner was showing "CALL STATUS". I pressed the END button, the SEND button and button under "CALL STATUS". Nothing happened and the phone was still ringing. I soft reset the phone by pressing the stand-by button for 5 seconds. Turned the phone on and looked in CALL HISTORY. There wasn't any new call in there. I thought it was my girlfriend, so I called her back and confirmed that she was calling me in that moment. The problem is that she ended the call after 2 "rings", but my phone kept ringing until I soft reseted it (I heard the sound at least 6-7 times -I have windows default ring-). After that I tried to call my number from another phone, and the Qtek was working fine.
What should I do to solve this problem? Is there a problem with the radio version?
Thank you very much!
Maybe....
But men!!! welcome to Windows Mobile world hahahaha the softresets are so helpfulll hahaha enjoy this iste men we are for help.
Maybe is the Radio rom maybe not cause it works fine then isnt it?
So please before upgrade anything more please unlock your phone with HardSPL process and read very well ok?
bye.
RAdio ROM
What version of WM are you running?... when I upgrade my Wizard to WM6 got the same problem, I fixed it by changing to Radio ROM 2.19.11 (t-mobile).
This is supposed to be the best one. Or try other Radio roms until the problem is solved.
Hope this helps
ivojoe said:
What version of WM are you running?... when I upgrade my Wizard to WM6 got the same problem, I fixed it by changing to Radio ROM 2.19.11 (t-mobile).
This is supposed to be the best one. Or try other Radio roms until the problem is solved.
Hope this helps
Click to expand...
Click to collapse
I dont know, my Wizard runs on SNN ROM WM 6.1)),(IPL/SPL 2.26,GSM 02.25.1, OS 10.0.0.10) for more than half year. I had same problems, in this period a few times only. Bt somethimes I cant see a callerID. Soft reset was only solution, I am tired of changing ROMs