I have searched on here and read the various threads on SDHC cards and I am still none the wiser
In the Wizard Accessories forum there is a 5-page thread about users experiences with what does and doesn't work - the problem is there is contradicting information. I thought I was getting somewhere with later units supporting SDHC and earlier ones not (serial numbers), however half way through the thread someone with an older Wizard says they have it working.....
Are there any difinitive answers to whether 4GB SDHC cards work in the Wizard, and if so does it need to be a G4, does it need to be manufactured after a certain date etc?
I have two Wizards (s/n: SZ602EE0xxxx and HT544EExxxx), both currently with 1GB SD cards (Danelec I think?). I am reluctant to buy any 4GB cards unless I know they are going to work.
Thanks
Andy
AFAIK some WM6 ROM with build .1921 includes drivers that should support SDHC cards but since I don't have a SDHC card on hand cannot test ...
or have a look here:
http://forum.xda-developers.com/showthread.php?t=320159
[removed] you seem to do not want to read.
nothin said:
http://www.mm.pl/~xoen/sdhc.rar
driver, that enabled sdhc for some devices(it wasn't obvious that it will work - but it works.), cannot test it with wiz , though.
Click to expand...
Click to collapse
I have already downloaded this but don't have a SDHC card to test it, and as I said I am reluctant to buy one if it won't work.......
Andy
[removed by me]
ok to clarify this, (im going to get flame at least once for this) SDHC cards will only work with devices that have the drivers for SDHC cards. This does not have to do with the hardware but if we cant get the drivers to talk to the hardware there is no support. we have the right hardware but no drivers and if it was a hardware problem then SDHC cards would not be the same as a SD card.
And can someone test that rom (not hopping it works but it might)
[removed by me]
I've got a 4gb SDHC card sitting here, and the latest TNT release (1921 base). Obviously, it does not currently work. Let me know what I need to do to try!
imthewa1rus said:
I've got a 4gb SDHC card sitting here, and the latest TNT release (1921 base). Obviously, it does not currently work. Let me know what I need to do to try!
Click to expand...
Click to collapse
The first page of theloon 7.2 ROM kitchen shows it working. I run this ROM, but I dont have a SDHC yet. I'll post there to see if anyone has had success.
Resurect this thread....
I am desperately running out of SD card space and would like to now 'upgrade' to a 4GB (or bigger?) SDHC card. I would like some testemonials of users who have had sucess with SDHC cards and what Wizard version and ROM you are running.
As I said I am reluctant to just buy a SDHC card and see if it works as it will be a waste of money if it doesn't.
Andy
count me in
just bought a 2gb sd card for 25€ over here but i need more space ^^
transcend sells the fastest sd mini cards as far as i tested them..
from hardware point of view the wizard device can handle this SDHC cards
as they use the same slot and hardware a usb cardreader has..
its just a matter of drivers or maybe just a registrysetting..
my guess its a combination of a new driver with enhancements for SDHC
and some registrysettings...
knowing windows they probably allready implented it in OS at least in WM6
and it be just a question of finding the right driver with the right settings..
my 4gig sdhc is coming in early next week, then I can test..
keep us informed on how it works please .. if it works that is ^^
Read this! It is only a matter of drivers and reg settings. Someone has created a cab with appropriate drivers and reg entries for testing somewhere on the xda forum.
http://www.microsoft.com/downloads/...c1-f0f4-4fd6-9366-b61e0ab59565&DisplayLang=en
theloon said:
Read this! It is only a matter of drivers and reg settings. Someone has created a cab with appropriate drivers and reg entries for testing somewhere on the xda forum.
http://www.microsoft.com/downloads/...c1-f0f4-4fd6-9366-b61e0ab59565&DisplayLang=en
Click to expand...
Click to collapse
So you can confirm this works? That's all I want. There are LOTS of varying reports on SDHC cards working & not working. I don't want to buy one and then realise it doesn't work. It's all right posting drivers and links to MS updates but that doesn't confirm anything. I want hard evidence.....
Andy
nothin said:
[removed] you seem to do not want to read.
Click to expand...
Click to collapse
I tried it and it doesn't work.
• Support for Video over IP telephony calls
• Support for the Pocket Outlook Object Model (POOM) and ActiveSync in the VoIP Home Screen and VoIP Contacts applications
• Secure Digital (SD) bus driver that supports SDHC specification 2.00 functionality, such as Secure Digital High-Capacity (SDHC) cards
Support for Extended File Allocation Table (ExFAT) and FAT32 on the x86 BIOS Loader, which provides access beyond 2 gigabytes (GB) of hard disk space.
this is probably the issue with ur 4gb card..
the bios of the wizard wont be able to acces beyond 2gb
but...
now that you have this 4gb card can you do us all a favor ?
here is the thing:
if u have a cardreader that reads the card on the pc just put it in the pc
otherwise put it in the wizard and start wm5torage and connect it as a
non-removable class and write enabled and start the thing and connect it to pc..
when connected goto computer and right click My Computer and choose manage.. in that window goto Disk Managment ..
in there you see this drive which is on the sd card, its shown as a drive
rightclick on the part next to it where it shows the volume on the drive
(it says Healty when correct and the driveletter it got assigned)
choose delete partition
now u have a empty flashdisk
format it in fat16 but.. :-> dont give it a name and set it to 2gb and do not assign a driveletter
now there is a space left of <1gb
format this too fat16 no name, no drive letter, no other stuff but plain format
now if all is correct and these two drives are there you can disconnect it.
unplug the cardreader (with the remove hardwarebutton in systray)
or if u got it in your wizard , shut down pc and take wizard out after it shut down
then release the wm5torage driver and close it and remove card and insert it
back again..
u can check for errors with pocket mechanic professional..
little warning though : do not do this with non branded fake 4gb cards as it
renders it useless probably..( these cards that are 2gb and reformated to hold 4gb)
KhMeRA said:
I tried it and it doesn't work.
Click to expand...
Click to collapse
Thanks for highlighting my point - some Wizard owners say they work, others say they don't. Even though it's only about UK £20, it's still wasted money if it doesn't work.....
Andy
ADB100 said:
Thanks for highlighting my point - some Wizard owners say they work, others say they don't. Even though it's only about UK £20, it's still wasted money if it doesn't work.....
Andy
Click to expand...
Click to collapse
it will work if someone can port wm6 r2 to the wizard
and i had it work with a 4gb sd mini card which wasnt SDHC
the site i bought it doesnt have them anymore ..
it seems it is an "out of specs" sd card hence there not sold here,
but maybe we can find a store that has these cards..
one more thought is that it maybe read the SDHC card as well if we
keep its volume space to a max of 2gb..
multiple volumes on a storage card works fine on a t-mobile stock rom
not tried it on others..
nevertheless ur right about the part that no-one is willing to buy something that doesnt work hence we need to test and try...
or as i would say :
Plug 'n Pray ©
guys, just wait until Monday or Tuesday, you will get a full report
let's start a poll, which ROM should be used for testing
Related
I would like to set up my Exec to use a external hard drive to access files. Is it possible to connect and use a external hard drive on my PPC?
You can your ppc into a USD memory stick, however there are considerations :
http://forum.xda-developers.com/viewtopic.php?t=45411
Only managed to do it via wifi. Just for streaming video and music.
You can't connect external drive to universal, because it does not have USB host functionality.
The only way is to connect over WIFi, there is an ASUS WiFi external drive that works like this.
Of course you can use WiFi, UMTS or even BT to connect to your home machine and access stuff or you can use services like Avvenu or ORB for this...
Where could I get a Bluetooth external drive at?
BUMP THAT said:
Where could I get a Bluetooth external drive at?
Click to expand...
Click to collapse
To my knowledge you can't.As far as I know there is no BT drives on the market. The only solution is WiFi or internet service.
OK. Thank you. Myabe I can get a WIFI Drive.
We already have 4gb sd cards for little money, 8 gb for a bit more, and 32 gb on the way to market. That's why there are no hard disks for Universal.
tailazoom said:
We already have 4gb sd cards for little money, 8 gb for a bit more, and 32 gb on the way to market. That's why there are no hard disks for Universal.
Click to expand...
Click to collapse
I don't think Universal has support for High Capacity SD cards.
"Normal" SD standard only supports sizes up to 2Gb. There are some 4Gb cards that work in some machines (but it's not 100%).
The newer cards are SDHC specification, that is a revision of original SD standard, and your machine has to support SDHC in order to use such cards, unfortunatelly I don't think Universal does support this...
Several members of this forum are using 4gb sd cards with Universal
4gb cards work fine with the universal as it can read FAT32.
colonel said:
4gb cards work fine with the universal as it can read FAT32.
Click to expand...
Click to collapse
This has nothing to do with ability to read FAT32 - as far as I know pretty much any WM device reads FAT32. It has to do with the fact that SD specification goes onlt to 2Gb. There are some 4Gb cards that go around the 2Gb limitation, and you can use these cards in SD capable devices - but it's not guaranteed that such card will work.
The new SDHC cards, are bult with new specification, and you have to have a device capable of reading such cards.
I don't know if Universal, or any other current WM device supports this or if a software patch can help.
Basically what you have to be aware is that if you buy HC card, you sould better test it first in your device, to make sure it will work!
AFAIK Secure Digital High Capacity SDHC is just fat 32 which the UNI has no problem with, the devices that will really struggle are the likes of cameras
ice_coffee said:
AFAIK Secure Digital High Capacity SDHC is just fat 32 which the UNI has no problem with, the devices that will really struggle are the likes of cameras
Click to expand...
Click to collapse
Like I said, I'm not sure if SDHC will work in Universal or any other current WM machine - I would definatelly be carefull.
On the other hand I'm also not sure why FAT32 would be the difference between SD and SDHC, as I had most of my cards formatted with FAT32 since at least my iPAQ in 2003...
Anyhow here is a link with announcement about SDHC, that clearly states 2Gb limit of "normal" SD cards, but no details on technical differences of both specifications.
http://www.sdcard.org/events/SDHC_Release06.pdf
my 4gb works flawless...
but thats also thanks to newer rom (since older roms had the camera problem)
im sure when the 1st 8gb SD cards become available someone will try if it works and we will also know...
if it wont work well in 1st attempt, maybe a rom-update could fix it 8)
This has now gone off topic!!
I spend alot of my time in forums just searching in order not to make usless or double posts in regards to what I require!!
There are threads open already in regards to the high capacity SD cards sao why are they not being used?
In regards to the external hd on universal believe this to be case closed unless someone has something to input about it....actually about it!
This forum is great but unfortunatelly already bad for indexing for search purposes....lets not make it worst.
WBR
My 4gb works fine. Only problem is that I still have the original rom and needed less than 2gb free space for it to work, but then that was why I got a bigger card...
Not that I think the above is really that surprising, but I bought a 8gig SDHC card for my camera (which IS SDHC compliant) and tried the card in the Prophet and it did not work/read/attempt to format etc... it did NOTHING with it...
So for those wondering/searching NO -- it doesn't work :-(
sdhc in registry
surprisingly though there is a key in the registry under drivers named sdhc. Maybe it means something else.
Oh good. One less thing to spend my money on
The "sdhc" in Windows Mobile stands for "SDIO Host Controller". So, nope, it's not SDHC we want.
SDHC is in the registry
HKLM->Drivers->BuiltIn->SDHC
I would believe that if the SDHC.dll is updated to SD 2.0, our device would be working with the 8GB SDHC card.
Has M$ updated that driver yet?
[Treo 680 works with 8GB SDHC. When that driver (Palm OS) is copied to Treo 700p, that makes the device work with 8GB too.]
There might be two hurdles sdhc.dll (MS) and omap850_sdhc.dll (HTC/TI). So even if MS updates WM to support SDHC cards, I think the hardware driver must be updated too.
8 gb-> four 2 gb?
JamesManios said:
Not that I think the above is really that surprising, but I bought a 8gig SDHC card for my camera (which IS SDHC compliant) and tried the card in the Prophet and it did not work/read/attempt to format etc... it did NOTHING with it...
So for those wondering/searching NO -- it doesn't work :-(
Click to expand...
Click to collapse
How about formating the card in the PC and splitting into four 2 gb partitions? Try that, may be that would work. You can also try few different media cards software to create the right partitions. just google it for the software.
Hope it works for you.
Best Regards,
Partitioning would probably not remedy SDHC issue
It's possible to partition a SDHC card into 2GBx4 or 4GBx2 but it would not change anything because the CSD (card specific data) is different on SDHC cards and the device should be able to interpret it before recognizing the partitions.
The prohet is incompatible with SDHC it can not read its CSD. The CSD is outside user accessible area and this is the device driver that reads it to understand what is the capacity, manufacturer ID and serial number of the card.
I suggest to never buy SDHC cards for prophet and use standard 4GB Transcend or Ridata cards.
Do not buy any 4GB SD card of brands not registered to sdcard.org and avoid fake Sandisk's as well.
makes sence.. my idea wasn't thought trough..
one question, is posible install anything drive o parth ?..
I have 1 sd 4gb Transcend 150x and i have more and more problem..
Please help me
Actualy i have 2 part 2 gb..
spoolk said:
one question, is posible install anything drive o parth ?..
I have 1 sd 4gb Transcend 150x and i have more and more problem..
Please help me
Actualy i have 2 part 2 gb..
Click to expand...
Click to collapse
Why 2 partitions? I have the Transcend 4gb SD. I formatted it on my PC using XP to one large 4gb drive and it works flawlessly. You might want to copy the data off of it and reformat it.
because , when open aplication from sd, some time the pda is block and i have get out the SD CARD , and get in too , for unblock.
SORRY FOR MY ENGLISH.
----------------------
FREE WEB TRANSLATION:
When I open the applications in the SD, the pda shields herself and I have to extract the SD and return to introduce her to unblock.
I have a hermes and there i was using a 2 gb sandisk micro sd card for some 5 month...and recently i brought a trinity and then hence im using that micro sd card with a minisd adapter in the trinity...and for last 1 week it worked flawlessly...last night all of a sudden the minisd card disappeared...no sign of storage card like that there has no card inserted...although in the about window it says expention slot in use..but in memory window no storage card installed!! and resco explorer or any other program cant detect the card...
firstly i thought my card is currupted so i inserted it (the micro sd) in my hermes and it worked there without any glitch...even then i formatted it in both fat16 and fat32 in the pc with a card reader but my trinity cant detect the card....
then i thought my mini sd adapter is broken...so i tried the memory card with the minisd adapter in the nokia 6280 and its working there without any probs....and then i tried the 64mb minisd card that came with nokia 6280 in the trinity and WTF my trinity can detect this card and also working with it..that means the card slot of the trinity is ok...
after all of this experiment then i flashed 3 types of rom in the trinity to see if it can detect the card... one is the lsvw edition with gps...(that i was using for a week before this thing happened) then a original htc rom and the dopod australia rom that my set had when i purched it...but all this three rom has same result...can detect 64 mb card (which is nokia oem minisd) but cant detect the 2gb sacdisk (wich is a micro sd to mini sd converted)...
now do anyone have similar kind of problem...or this is a new issue...i dont have any other card to try in this moment.... just ordered a oem 4gb minisd...will get it in next week...
and finally to let you know that my micro sd card is perfectlly working both in hermes and in nokia with the mini sd adapter and i also did a rough test on it with a card reader in computer with the mini sd converted inserted...and no sign of a probs there...
any comment or suggestion would be helpfull...
and a final thing as i brought it in plan from 3 australuia..and im still in that 14 day period...do you thing if i go to a 3 store and told them the setuation will they replace my handset..??i have the dopod australia rom installed so i dont hink they will be able to detect that i had flased other roms...??
Sajib
it does not support anything higher than a 1gb memory card, i have had this problem to with a 2gb card, i have now put a 1gb card and it see's it fine!
Malkav said:
it does not support anything higher than a 1gb memory card, i have had this problem to with a 2gb card, i have now put a 1gb card and it see's it fine!
Click to expand...
Click to collapse
Sorry but I disagree. I have been using a standard Sandisk 2GB miniSD for 4 months now without any problem.
i got told it will only support a maximum of a 1gb mini sd?????
Using a 2 GB SanDisk without problems.
I've been using a standard (non SDHC) 4 gb card for 3 months with no major problems. Never had the card 'disappear' completely - only minor file corruption like losing a picture or a ringtone (but it always comes back on soft reset). Only have those types of issues occasionally anyway (like maybe 1 a week - device should be soft reset that often anyway!) Overall, very pleased with the performance of this device.
G'day,
Perhaps you could try formatting the card in the trinity using an OEM tool. My card (1GB Sandisk miniSD) "disappeared" a few weeks ago after using it OK for a month. I used a card reader in my PC to back it up then formatted it using Spb Pocket Plus in the trinity. I was then able to restore the data from the PC using activesync. Worked OK for me and no problems since.
Good luck.
minisd card problem
Dear Customer,
Thanks for your email regarding your P3600.? The issue you describe is something we are aware of and are currently in the process of rectifying.? It seems to be linked in some way to the latest updates to Windows Mobile 5 and as such we have also enlisted Microsoft's help in solving this.? It seems that the device is accessing the memory while it is in an idle state.
We are currently still investigating the matter with the help of our engineers in Taiwan, but in the meantime, to workaround the problem you can set the device to turn itself off after 1 minute in the power options, then let the device turn itself off instead of pressing the power button.
Once we have fixed the problem, I have no doubt it will be released in some sort of ROM update in the near future.
Thank you for your patience in this matter.
Hong Kong's D810 now officially shipped with a 2G miniSD as a gift
Ok,
I also asked HTC europe supoport about the specifications and got an answer per eMail that the P3600 supports mini SD up to 2GB and does NOT support 'ultra' or SD HC-versions.
So perhaps give it a try with a regular (and unfortunately slower) 2GB SD??
S.
A strange developement that i thought better to be share...firstly my 2 gb sandisk micro sd card (converted to mini sd with a adapter) still doesnt work after updating to latest dopod rom and to latest aku 3.3.1 htc rom...setting>memory still says not installed...but if i boot into bootloaded mode and use the trinming.nbh trick to flash my trinity with a nbh file..it does detect the sd card instantly and start flashing without any problem..so it also prove that the sd card slot is ok and it also detect the card in hardware level but it cant recognise in software part...its strange as the same card worked for the 1st 1 week after i brought the d810..!!!!
now does anyone one have more ideas??
and hopefully im getting my topram 4gb card in a days or 2 to test more furthur...in this mean time im really frustated for not able to use tomtom as no space to keep the maps....
sajib said:
A strange developement that i thought better to be share...firstly my 2 gb sandisk micro sd card (converted to mini sd with a adapter) still doesnt work after updating to latest dopod rom and to latest aku 3.3.1 htc rom...setting>memory still says not installed...but if i boot into bootloaded mode and use the trinming.nbh trick to flash my trinity with a nbh file..it does detect the sd card instantly and start flashing without any problem..so it also prove that the sd card slot is ok and it also detect the card in hardware level but it cant recognise in software part...its strange as the same card worked for the 1st 1 week after i brought the d810..!!!!
now does anyone one have more ideas??
and hopefully im getting my topram 4gb card in a days or 2 to test more furthur...in this mean time im really frustated for not able to use tomtom as no space to keep the maps....
Click to expand...
Click to collapse
Have you reformatted the card using a card reader with XP?
Now...I have maintained many times that my TopRam 4gb works just fine in my Trinity while many others have complained about problems with cards from many different manufacturers, both 2gb and 4gb cards. It may not be just a coincidence that mine has no problems. I always do the WM5 performance tweaks on my devices and yesterday I saw in the Hermes Wiki a reference to a known problem with the storage buffer settings. The fix that it recommends is one of the settings that I always change with my performance tweaks. It cetainly won't hurt, and for all of those people that are constantly complaining about their miniSD cards, maybe you should try it! The other performance tweaks might also help.
Quote from the Hermes Wiki:
Missing/Corrupt SD Card?
This mod seems to make the SD Card more stable, and avoids the problems encountered by some members where the SD Card either disappears or the card 'loses' information until it's ejected then re-inserted.
There are two issues to this. One is that SD Cards that are made in Taiwan seem to have more problems than Japan made cards. Kingston SD Cards are made in Japan, so, they are a relatively good bet. Sandisk and Crucial are made in Taiwan, so seems to have more problems. The second issue is the registry; the default values are just too low.
See:
http://forum.xda-developers.com/showthread.php?t=294324
[HKLM\System\StorageManager]"PNPUnloadDelay" = dword:8196
[HKLM\System\StorageManager]"PNPWaitIODelay" = dword:8196
Yeap i tried that performance tweak in both way increased it to 8196 and also decreased it to 1500 nothing helped..
and sure i did format it with two diffrent card reader and also using some other tools like panasonic sd card formater or hp formatting tools...and just a hour ago i tried pertitioning it into two part 1gb/1gb hermes do recognise the card so do the pc in 2 partition mode but trinity cant detect it even now...
and finally as i told you my trinity detect the 64 mb nokia oem minisd card so i also tried partitioning my micro sd into a single 64 partition to find out if it has something to do with the capacity but same result there...
so im bit of confused here...really confused..
Matterhorn said:
Have you reformatted the card using a card reader with XP?
Now...I have maintained many times that my TopRam 4gb works just fine in my Trinity while many others have complained about problems with cards from many different manufacturers, both 2gb and 4gb cards. It may not be just a coincidence that mine has no problems. I always do the WM5 performance tweaks on my devices and yesterday I saw in the Hermes Wiki a reference to a known problem with the storage buffer settings. The fix that it recommends is one of the settings that I always change with my performance tweaks. It cetainly won't hurt, and for all of those people that are constantly complaining about their miniSD cards, maybe you should try it! The other performance tweaks might also help.
Quote from the Hermes Wiki:
Missing/Corrupt SD Card?
This mod seems to make the SD Card more stable, and avoids the problems encountered by some members where the SD Card either disappears or the card 'loses' information until it's ejected then re-inserted.
There are two issues to this. One is that SD Cards that are made in Taiwan seem to have more problems than Japan made cards. Kingston SD Cards are made in Japan, so, they are a relatively good bet. Sandisk and Crucial are made in Taiwan, so seems to have more problems. The second issue is the registry; the default values are just too low.
See:
http://forum.xda-developers.com/showthread.php?t=294324
[HKLM\System\StorageManager]"PNPUnloadDelay" = dword:8196
[HKLM\System\StorageManager]"PNPWaitIODelay" = dword:8196
Click to expand...
Click to collapse
sajib said:
Yeap i tried that performance tweak in both way increased it to 8196 and also decreased it to 1500 nothing helped..
and sure i did format it with two diffrent card reader and also using some other tools like panasonic sd card formater or hp formatting tools...and just a hour ago i tried pertitioning it into two part 1gb/1gb hermes do recognise the card so do the pc in 2 partition mode but trinity cant detect it even now...
and finally as i told you my trinity detect the 64 mb nokia oem minisd card so i also tried partitioning my micro sd into a single 64 partition to find out if it has something to do with the capacity but same result there...
so im bit of confused here...really confused..
Click to expand...
Click to collapse
It sounds like you've really tried everything. I don't know what else to say , maybe another card will give better luck?
Ok now there i have just got my 4gb topram card and the best of all is my trinity can detect it and show the size as 3970 mb!!!! hey..at last....even though i didnt test it throughly yet (that will be done in next couple of hour) but im happy that the problem i mentioned earlier with 2 gb micro sd card now seems was related to the mini sd card converter or with the card itself atlist not have to deal with the phone warrenty and stuff like that...
thanks to all who tried to help me out..
sajib said:
Ok now there i have just got my 4gb topram card and the best of all is my trinity can detect it and show the size as 3970 mb!!!! hey..at last....even though i didnt test it throughly yet (that will be done in next couple of hour) but im happy that the problem i mentioned earlier with 2 gb micro sd card now seems was related to the mini sd card converter or with the card itself atlist not have to deal with the phone warrenty and stuff like that...
thanks to all who tried to help me out..
Click to expand...
Click to collapse
Please let me know if it works fine after a week or so. I'm interested in getting one...
Thanks,
Matterhorn said:
Have you reformatted the card using a card reader with XP?
Now...I have maintained many times that my TopRam 4gb works just fine in my Trinity while many others have complained about problems with cards from many different manufacturers, both 2gb and 4gb cards. It may not be just a coincidence that mine has no problems. I always do the WM5 performance tweaks on my devices and yesterday I saw in the Hermes Wiki a reference to a known problem with the storage buffer settings. The fix that it recommends is one of the settings that I always change with my performance tweaks. It cetainly won't hurt, and for all of those people that are constantly complaining about their miniSD cards, maybe you should try it! The other performance tweaks might also help.
Quote from the Hermes Wiki:
Missing/Corrupt SD Card?
This mod seems to make the SD Card more stable, and avoids the problems encountered by some members where the SD Card either disappears or the card 'loses' information until it's ejected then re-inserted.
There are two issues to this. One is that SD Cards that are made in Taiwan seem to have more problems than Japan made cards. Kingston SD Cards are made in Japan, so, they are a relatively good bet. Sandisk and Crucial are made in Taiwan, so seems to have more problems. The second issue is the registry; the default values are just too low.
See:
http://forum.xda-developers.com/showthread.php?t=294324
[HKLM\System\StorageManager]"PNPUnloadDelay" = dword:8196
[HKLM\System\StorageManager]"PNPWaitIODelay" = dword:8196
Click to expand...
Click to collapse
Hi to all!
i have just bought a htc p3600, and when i put my 2gb miniSD card in it, he don't recognise it!!!! this card has working perfectly in my "old" QTEK 9100 (last 9month)
i have also verify that in my QTEK 9100 the regystri was:
[HKLM\System\StorageManager]"PNPUnloadDelay" = dword:1500[HKLM\System\StorageManager]"PNPWaitIODelay" = dword:1500
i put this values in HTC P3600.... still not regonized. i try whith 8196 but nothing apenned too.....
in anytime, if i put my miniSD in the QTEK 9100, he work's whith no problem....
i already read all this tread, but i can't find the solution to this problem.... maybe i search badly, but can anyone indicate me , if exist, the rigth method to format/resolve this problem.... please help....
hi to all again...
when i'm to format my miniSD in my PC, i can chose the cluster size.... in the tip above, it was referring to change two value to 8196.... but in my PC the cluster size is 8192..... i try whith both value, but still can't get my miniSD recognized....
Matterhorn said:
Have you reformatted the card using a card reader with XP?
Now...I have maintained many times that my TopRam 4gb works just fine in my Trinity while many others have complained about problems with cards from many different manufacturers, both 2gb and 4gb cards. It may not be just a coincidence that mine has no problems. I always do the WM5 performance tweaks on my devices and yesterday I saw in the Hermes Wiki a reference to a known problem with the storage buffer settings. The fix that it recommends is one of the settings that I always change with my performance tweaks. It cetainly won't hurt, and for all of those people that are constantly complaining about their miniSD cards, maybe you should try it! The other performance tweaks might also help.
Quote from the Hermes Wiki:
Missing/Corrupt SD Card?
This mod seems to make the SD Card more stable, and avoids the problems encountered by some members where the SD Card either disappears or the card 'loses' information until it's ejected then re-inserted.
There are two issues to this. One is that SD Cards that are made in Taiwan seem to have more problems than Japan made cards. Kingston SD Cards are made in Japan, so, they are a relatively good bet. Sandisk and Crucial are made in Taiwan, so seems to have more problems. The second issue is the registry; the default values are just too low.
See:
http://forum.xda-developers.com/showthread.php?t=294324
[HKLM\System\StorageManager]"PNPUnloadDelay" = dword:8196
[HKLM\System\StorageManager]"PNPWaitIODelay" = dword:8196
Click to expand...
Click to collapse
hi, pls cd u link the other tweaks u reccommend?
Ordered a Sandisk 2GB Ultra Mini SD card earlier today..
After reading this perhaps a 1GB would've been a safer bet... Still, worth a try. Would prefer to have the complete EU maps on one card.
Will it support SDHC cards now?
no, sorry.
tried it already, it failed
BA hardware device isn't compatible with SDHC
do we know this for absolute fact? reason I ask is that the hermes didn't recognize hc cards until wm6 and its drivers supported them.. thought this wm6 might have brought along support for the BA as well
tried NOT WORKING
johnripper said:
tried NOT WORKING
Click to expand...
Click to collapse
From what I understand from the Universal forum, the ability to use SDHC cards is software related, not hardware. Thats why in the latest version of WM6 for the Universal, there is full support for SDHC cards. Someone just has to modify the driver to support them.
SDHC
has anyone with a SDHC tried this driver:
http://rapidshare.com/files/53794030/sdhc-driver-x500.zip.html
.....just happen to come across it, so try at your own risk!
(from: http://www.pxdxa.com/read.php?tid=48437 )
AbuGWM5 said:
has anyone with a SDHC tried this driver:
http://rapidshare.com/files/53794030/sdhc-driver-x500.zip.html
.....just happen to come across it, so try at your own risk!
(from: http://www.pxdxa.com/read.php?tid=48437 )
Click to expand...
Click to collapse
hey i had tried this driver and it removes the normal sd card driver so any who is going to try first take a backup. Im not sure about sdhc as i dont own it yet so plz someone having HDSC plz try this its from HTC.
that would be cool.. I will love to have a 50Euros 8Gb SDHC card in my BA
krishan2207 said:
hey i had tried this driver and it removes the normal sd card driver so any who is going to try first take a backup. Im not sure about sdhc as i dont own it yet so plz someone having HDSC plz try this its from HTC.
Click to expand...
Click to collapse
I installed this cab on on my 2nd BA (this is my test platform), and it doesn't seem to work. It replaces the SD card driver, so that it won't even recognize normal SD cards, or SDIO cards. I think that the SD hardware that this drivers was written for must be different. I'll keep playing with it, but I suspect that this is not the answer.
-C
This driver is for Eten X500 it will not work on BA
So all along i thought it was a hardware problem, i should put a hold on buying one of those 4gb sd and wait for this.
I have a Topram 8GB SDHC, when ever you guys find a driver for the BA just let me know, i'll test it and report back here.
For SDHC to work on BA, the SDHC driver must be extracted from the same processor device. That is what I see on the ETEN SDHC driver that it was applied from another Samsung processor device.
- TKN
Hardware-wise closest device should be Universal which does have working SDHC now. But if the PXA27x is too much different from BA's PXA263 then it will be impossible.
Does This Work With Ba?
I Found This Cab. Does It Work?
where did u find this?
did you find it with any relations to universal or htc devices?
tested it and it didn't work!
no its from asus pda
Do you think maybe Axim50v driver will work? or 'WM 6 Professional Images' from MS? (was just wondering...)
Something to keep in mind about the larger sized cards...
In my experience, the larger the card, the slower the access.
When the angel was designed, I really doubt that anyone knew that cards of the sizes available now would be available, not to mention that the SD driver in our phone is pretty old.
When I first got my 4 gig card, I noted that accessing data from the card was much slower than the system memory. That speed drop all but went away after I partitioned the card into two smaller 'cards'.
That being said, SDHC is the new standard, and having the ability to read and write to these cards, even if it's not any faster, would be a good thing.
Found this cab on Axim forum.
http://www.megaupload.com/?d=SMFT1Y6J
I can test it, i don't have a SDHC card.
What size are you running and what brand?
I ordered a 4G from newegg and I have to return is since the phone will not recognize it. I want to make sure the next one I order will work.
there are hacks that allow the mogul to recognize 4gb cards, search dev and hacking forum
johnnycross22 said:
there are hacks that allow the mogul to recognize 4gb cards, search dev and hacking forum
Click to expand...
Click to collapse
you shouldnt need any hacks, mogul (at least from sprint, not sure of the p4000) should recognize it out of the box (the "hacks" are drivers for the 6 and 8gb cards)
did you try the card in a pc? its possible you just got a bad card
8GB should work out of the box.
Popped an 8GB SDHD into PPC 6800 and worked without doing anything to it.
The 4GB it replaced worked too but had to format it on PC first with the addapter, don't know why. Try formating and see if that helps.