Related
Hi there, my phones screen will not work, my friend kept opening and closing they keypad quickly after which he gave me the phone back and the screen did not work!
The problem im having is that the touch screen dont work, nothin else is wrong, the screen is not cracked, jus that it dont touch sceen no more.
The bad thing is I put it on boot mode and erased the phone memory, and since the touch screen dont work i can allign the cross thing.
Does anyone know a way in which i could fix this?
Cheers.
pod8 said:
Hi there, my phones screen will not work, my friend kept opening and closing they keypad quickly after which he gave me the phone back and the screen did not work!
The problem im having is that the touch screen dont work, nothin else is wrong, the screen is not cracked, jus that it dont touch sceen no more.
The bad thing is I put it on boot mode and erased the phone memory, and since the touch screen dont work i can allign the cross thing.
Does anyone know a way in which i could fix this?
Cheers.
Click to expand...
Click to collapse
Mmmm. Tricky perhaps. A hard reset will either cure or leave you stuck. If you hard reset and the screen is indeed dead (touch wise) then you'll never get past the alignment stage. If the touch issue is software related then you would be sorted with the hard reset.
A gamble I think!!
However you are stuck at the moment so in a sense you have nothing to lose. If it ends up being useless then you are faced with a warranty (hopefully) repair otherwise some DIY though it's not entirely obvious what has broken/come loose - possibly just a ribbon connector.
Mike
Maybe the ribbon cable came loose on the LCD side?
myztikal47 said:
Maybe the ribbon cable came loose on the LCD side?
Click to expand...
Click to collapse
Yeah i think its that as well, i hard reseted it a few times with no effect, in the begining of the day, it could still reconise the screen taps around 2/3 times before it totally went dead.
Are there any tutorials on how to open it up to check the ribbon?
Thanks.
This maybe the hardware problem with the mainboard itself. I read about this on here a few times, most people had the get their phones exchange....
myztikal47 said:
This maybe the hardware problem with the mainboard itself. I read about this on here a few times, most people had the get their phones exchange....
Click to expand...
Click to collapse
Yes, I am equally unsure that this is just a simple loose connector. It may be, but it appears to be fine for a short while and only then goes off.
Like you myztikal47, I suggest going for warranty replacement if at all possible. Only if you have no warranty shuld you attempt a repair yourself - this is a notoriously ellusive fix and indeed I would say there is no 100% works for all answer. Certainly do not assume it's the screen - most probably it isn't and you'll waste your money.
There are dismantling links in this forum - but you'll find them on my small Hermes site http://michael-channon.spaces.live.com- go to the loose keyboard section and you'll see the links.
Mike
my 8525 had the same exact problem, and i swapped the LCD and still doess the same thing...
I dont know what the problem could be, and i dont have a warranty.
What could be going on????
Any 1 know where 2 find the service manual????
Jorge
[email protected]
mikechannon said:
Yes, I am equally unsure that this is just a simple loose connector. It may be, but it appears to be fine for a short while and only then goes off.
Like you myztikal47, I suggest going for warranty replacement if at all possible. Only if you have no warranty shuld you attempt a repair yourself - this is a notoriously ellusive fix and indeed I would say there is no 100% works for all answer. Certainly do not assume it's the screen - most probably it isn't and you'll waste your money.
There are dismantling links in this forum - but you'll find them on my small Hermes site http://michael-channon.spaces.live.com- go to the loose keyboard section and you'll see the links.
Mike
Click to expand...
Click to collapse
Ok my best bet is to take it to carphone, i got my screen replaced there a few months ago, think i still have a 1 year warrenty
Thanks for all your help anyways
Tytn Service manual
jblandon1024 said:
my 8525 had the same exact problem, and i swapped the LCD and still doess the same thing...
I dont know what the problem could be, and i dont have a warranty.
What could be going on????
Any 1 know where 2 find the service manual????
Jorge
[email protected]
Click to expand...
Click to collapse
Here you can found the manual
http://www.megaupload.com/?d=0GD472TP
Roby
Hey i don't know what happened to my Wizard but suddenly after installing two Alarm Clock softwares i just started losing my Screen Alignment. To fix it i even tried re flashing my Wizard but this time the problem started early and without installing those programs. Did anyone of you have the same problem?? If you do have a patch do post it in reply. Cause after using the ROM I'm using now all the other ROMs seem to be too Slow.
NOTE: Information about my Wizard is updated and in my signature.
Thanks in Advance.
HI,
Have you ckecked the connection between the screen and the print? Maybe it has a bed contact?
If you still have warranty, the you better send your phone back to let it repair
good luck
jordyk said:
HI,
Have you ckecked the connection between the screen and the print? Maybe it has a bed contact?
If you still have warranty, the you better send your phone back to let it repair
good luck
Click to expand...
Click to collapse
Hey im sure that there are no problem with the HARDWARE cause if there were problems with the hardware then it should not even work after i align screen and secondly if you know any ROM faster than mine (mentioned in my sign) cause when i switch to nayother ROM they seem to be too slow.
xda2_haseeb said:
Hey im sure that there are no problem with the HARDWARE cause if there were problems with the hardware then it should not even work after i align screen and secondly if you know any ROM faster than mine (mentioned in my sign) cause when i switch to nayother ROM they seem to be too slow.
Click to expand...
Click to collapse
hi,
but you said that you heve the problem with all the roms, isn't it? so then it must be a hardware problem?
xda2_haseeb said:
Hey im sure that there are no problem with the HARDWARE
Click to expand...
Click to collapse
Well there's your problem right there. Anyone that sure of anything can't be right about it.
Seriously though. This sounds like an intermittent fault, and that is the domain of hardware failures. This kind of thing happens when hardware ages. Especially around things with moving parts. That slide-out keyboard wreaks havoc on the ribbon over time, and eventually, they just give out. You may have one that's merely loose, or it may be getting ready to break, or it may already be broken and just touching often enough to make you think it's okay.
The chances of this being firmware or driver-related are really slim. If that was the case, the error would be constant, not intermittent.
Myrddin Wyllt said:
Well there's your problem right there. Anyone that sure of anything can't be right about it.
Seriously though. This sounds like an intermittent fault, and that is the domain of hardware failures. This kind of thing happens when hardware ages. Especially around things with moving parts. That slide-out keyboard wreaks havoc on the ribbon over time, and eventually, they just give out. You may have one that's merely loose, or it may be getting ready to break, or it may already be broken and just touching often enough to make you think it's okay.
The chances of this being firmware or driver-related are really slim. If that was the case, the error would be constant, not intermittent.
Click to expand...
Click to collapse
hey i guess that SLIM chance has won i installed another ROM (http://forum.xda-developers.com/showthread.php?t=367375) Its been a day and its working f9.
jordyk said:
hi,
but you said that you heve the problem with all the roms, isn't it? so then it must be a hardware problem?
Click to expand...
Click to collapse
Sorry! but i dont guess i said that anywhere by reflashing i meant reflashing the same ROM. If the problem still presists then it might be a HARDWARE fault but for now its working pretty fine.
Forgot one thing, if this is an HARDWARE issue then is it fixable?? if yes how?
hey man i had this annoying issue whenever i remove the battery..but it should be OK when u do alignment a couple of time repeatedly...try it and post the results here..
I have had alignment problems for a long time. Clearly mine is hardware related, since stock and custom ROMs both show the same problem. Sometimes I'll go for months with no problem, and then I'll have to start realigning several times a day. Thank god for smartskey, otherwise I could rarely close a program. I was told that it was probably a hardware problem and that it would've been covered under warranty (if I was still under warranty), but I never sent it off. Somebody else told me once that It was probably due to there being pressure put on the edges of the screen from the frame around the screen, and if I disassembled it, made sure the seal/padding wasn't touching the touch-sensitive part and then reassembled it, I should be fine. But I looked up the process in the service manual, and WOW it looked like a lot of work with a lot of places where I could screw up the phone, so I just live with it. Sometimes sliding it open and closed would totally mess it up. It seems to help if I just squeeze the edges of the screen to really "seat" it, and then align. Then it seems to stay pretty well aligned for a good while. Good luck!
I cooked up a ROM and installed it and it works now i dont have the problem. Please try my ROM and give me feedback link to it exists in my signature. Thanks. TC
The warranty for my HD is gone and I would probably need to change the touch screen digitizer myself, found these on ebay for ~60€, but does anyone know how to change them? Again, any help would be appreciated!
Originally:
HTC Touch HD, it has been a wonderful phone until now. I have encountered a wierd problem with the touchscreen.
First the touchscreen stopped working completely, after awhile it suddenly started working, at first it recognized some bits and pieces but now it recognizes every touch as normal, except..
It is very inaccurate and the "sum of inaccurity" seems to change depending on where I push the screen, the screen alignment option in settings does not fix this.
I recorded two videos to show this problem better:
http://www.youtube.com/watch?v=Xd1vjiHr2QU
http://www.youtube.com/watch?v=TynTTFIQJv8
Any help would be appreciated on how to fix this!
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
spzero said:
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
Click to expand...
Click to collapse
I have handled it with great care so no big knocks or drops. Ill contact the store about the warranty. Just wondered if theres a way how to simply fix this.
Just noticed, the screen works normally sometimes for one touch, then it goes back to the inaccurate **** :/
Im now guessing that some cable could be loose or something like that?
Have u tried recalibrating the screen? I can't remember exactly where I found it, but its in programs or settings somewhere.
Viba said:
...the screen alignment option in settings does not fix this...
Click to expand...
Click to collapse
Yes I have..
Anyway I RMA'd it now. Hope I get a new one
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Seems a little unfair if they don't seeing as the HD is purely touch screen!
SomethingWicked said:
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Click to expand...
Click to collapse
Hmmh, well the store probably sends it to some service center here in Finland that fixes HTC phones.
Indeed sounds very stupid if the warranty doesnt cover the touchscreen.
Perhaps my HD suffered from something else than a broken touchscreen, eg. mainboard or a chip that controls the touch screen. Who knows I'm just hoping it "passes" the warranty :|
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
drabisan said:
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
Click to expand...
Click to collapse
So there's no way I could replace only this?
http://global.ebay.com/Original_Digitizer_Touch_Screen_For_HTC_Touch_HD/310124432320/item
Another sad story // hopefully with a good ending
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well.
All of a sudden, I started having problems with the touch screen of the Touch HD. I started noticing that whenever I touched the Touchflo buttons, the phone vibrated. Soon I came to realize the if I touched in some spot, the phone recognized that I was touching lower, to the point that it could not recognize touches in the taskbar, for instance.
The united has 2 or 3 months max. It had some falls before and I do not really know who (or which one) was the culprit.
Tried this as fix: re-alignment, hardresets, Official ROM upgrade. Then I started reading and understanding that the problem was probably the digitizer ("nice to meet you").
I live in Brazil and the Touch HD is not expected be released here any time soon. So the few HTC service centers do not know how to fix it and do not have parts for it. And also, I bought mine from an auction site by some user who bought it abroad, with no warranty whatsoever. I am left alone in this.
I was very frustrated and eager to get my device running again. So I started looking for a new digitizer and also the tools to open my phone. The digitizer (just the digitizer, not the LCD screen) I ordered from an ebay shop in Hong Kong on Monday and is expected to still arrive sometime in this century (IF Brazilian port authorities do not mess up). The tools arrived yesterday.
I downloaded the service manual and said to myself, let's see if the digitizer problem is maybe due to a loose flat cable. Got to work and carefully disassembled the device as per the service manual. (I have to say that, although I try to be carefull, I always scratch, bend or mess something up when I do jobs like these. So I was afraid of cracking some plastic or worse and actually did some.)
Up to where the service manual show, it went incredibly very well. But that's the problem. The service manual guides you to disassemble the unit up to the point where you are with the bezel, LCD and digitizer in one piece.
But hey! I saw zillions of internet shops selling the bezel (actually, the hole housing, but with no LCD), the digitizer or other parts separately! What is going on?
So I started trying to unmount the bezel, LCD and digitizer. Tried several things. It got really late. I was impactient. So I tried splitting the digitizer from the LCD, by inserting a hard plastic aluminium tip between the digitizer and the housing. A very thin plastic kind of tape came out (at lest part of it). So I tried doing it more. No success. And then I put a very thin screwdriver between then (just enough to get an ulgy bent it the plastic housing).
When I had played enough with that puzzle, I gave up and began mounting everything back. The good part is that I was able to get everything back and the phone is working. Well, except for the digitizer.
First thing I did was to kidnap the wife's Nokia E71 I bought her last month and she is not using yet (she couldn't learn to use yet; well, she hasn't even tried it), because I have to have mobile access to my emails.
And I really started now to consider other alternatives. Will some user like me EVER be able to change just the digitizer? Is it even possible? If it is, I would like to give it at least another shot.
But I am also afraid that it could be another part which is in failure. I just don't want to spend more $$$$ in this. It would be better to buy another phone (and maybe not a complete touchscreen - gosh, I miss my Tytn II). I so regret being a gadget freak and not waiting a release in my country.
Shoud I send my phone abroad for a service center repair? My sister lives in Dubai and she may be able to help.
Should I give up my unit and seel the used parts in ebay?
Hope to hear your suggestions. Thanks anyway.
Viba said:
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
Click to expand...
Click to collapse
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Rafael K said:
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well...
Click to expand...
Click to collapse
Nice to know I'm not alone with this problem
Sucks that the digitizer couldn't be removed separately, would help alot if someone knew how to do this, if even possible..
crashDebug said:
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Click to expand...
Click to collapse
I have already tried with 3 custom roms and 2 original SPL:s with two original roms.
The Finnish law allows me to get my HD replaced if I could prove that the custom rom didn't brake the digitizer. Already sent some emails to the local repairstation for HTC phones here in Finland, lets see...
I run a repair center (US). I have not gotten curious enough to take mine apart, but if someone has a dead one to experiment with, PM me.
Broken digitizer glass
I have the same problem with the digitizer glass being broken. I have had the back off the phone and stripped it back as far as I dare, but the service manual just doesn't tell you how to replace the digitizer and glass only. Checked out youtube where there are many videos with instructions on how to replace the screens and digitizers on lots of different phones as well as the iphone, just nothing on the Blackstone yet.
Any one else found a solution or decent instructions?
Today I disassembled my HD too, found a loose screen wire but nothing else. Even when I attached it properly the screen didn't work.
Has anyone found out how to change the digitizer?
some info
Hello,
I am also have HTC Touch HD, and I am also thinking about replacement of touch screen and housing because of scratches. Here instruction in Russian
http://www.pdacenter.ru/razborka/htc-touch-hd/
step 24 is not shown on the picture, but there is mentioned that in order to replace screen you should push it forward from back side of the screen; also mentioned that screen is fixed with double sided tape (probably it is fixed to the touch screen)
Also, did you try to use any polish to remove minor scratches on the touch screen? HTC Touch HS has resistive screen and probably may be polished (in contrast to capacitive touch screen that has some coating).
All the best
Also, about this problem see
http://forum.xda-developers.com/showthread.php?p=3911326
You guys should be smarter! If you want to warranty exchange it, flash the normal SPL again and flash a stock rom!
Once upon a time when I woke up with a bad mood, I threw my phone away to stop the alarm.. Since that moment my I/O button which is on top of the phone (the one you switch the LCD's blacklight on and off) is hard to push.
The 'clicking-system' is (I think) dented in, and from the surface it actually looks like that too. It still works though, but you have to press really hard.
I asked at the local phone shop what my invoice would look like if I have it repaired by them and I found out it would be better to do it myself.
The problem is that although all the parts which are available on internet, this button is really hard to get. I can;t even find it on eBay (maybe I just search the wrong way).
Does anyone know where to get this, and if it hard to solder it (if needed)?
I am located in The Netherlands, so I prefer something that SHIPS to NL.
I found this (https://www.gsm4world.us/htc-touch-...lex-cable-lcd-key-ear-repair-d-02961_405.html) but I don't know if it will do the job.
Thank in advance guys!
Does anyone know?
gsm4world.us has almost full line of parts for the fuze/tp
Sorry I can't be of more use, but some searching on eBay will show that you can get the same part as on GSM4World a bit cheaper:
http://cgi.ebay.co.uk/HTC-TOUCH-PRO...Accessories?hash=item1c0ce8e08a#ht_2173wt_939
Edit: Actually, I'm not convinced that the part you suggested is the one you need. I think you should hold off buying anything until someone can tell you for certain which is best.
Power button
ewaldvk said:
Once upon a time when I woke up with a bad mood, I threw my phone away to stop the alarm.. Since that moment my I/O button which is on top of the phone (the one you switch the LCD's blacklight on and off) is hard to push.
The 'clicking-system' is (I think) dented in, and from the surface it actually looks like that too. It still works though, but you have to press really hard.
I asked at the local phone shop what my invoice would look like if I have it repaired by them and I found out it would be better to do it myself.
The problem is that although all the parts which are available on internet, this button is really hard to get. I can;t even find it on eBay (maybe I just search the wrong way).
Does anyone know where to get this, and if it hard to solder it (if needed)?
I am located in The Netherlands, so I prefer something that SHIPS to NL.
I found this (https://www.gsm4world.us/htc-touch-...lex-cable-lcd-key-ear-repair-d-02961_405.html) but I don't know if it will do the job.
Thank in advance guys!
Click to expand...
Click to collapse
Hi, Recently my Touch pro's motherboard gone dead.
Like yours HTC service center gave me estimate equal of new device so i listed parts to help others.
If your device is still facing the same problem please PM me with problem & picture, it will help us to decide which part you actually need.
The link posted by you is whole switching system, but i believe you just need plastic part of power button
http://www.youtube.com/watch?v=uQ7csMbeQDA
The device screen doesn't react on pressings after running for some time, mostly running some more demanding application, in my case as seen in the video clip, a 3d game. The center-left part of the screen just won't answer to my touches, to get it more clear I've made a clip.
P.S.
The phone was bought in Romania (Eastern Europe), had been in service one time, seems all they've done is to resoft the phone.
Are you having a leather case or something that wraps over the side and front of the Leo? I can't see clearly but it seems so.
alex fung said:
Are you having a leather case or something that wraps over the side and front of the Leo? I can't see clearly but it seems so.
Click to expand...
Click to collapse
nope, I don't -the stock leather pouch is between the table and device
Have you tried hard resetting the phone? backup all your data and hard reset.
anaadoul said:
Have you tried hard resetting the phone? backup all your data and hard reset.
Click to expand...
Click to collapse
I did that (even in my video if you watch it); Updated to the latest firmware available on htc, same stuff.
P.S.
this issue appears mostly when I press the reject (power) button, so it's smth. with lower right corner...
I don't see why there's a discussion or even a post about this. The phone is obviously faulty. You say yourself that it's not a software issue so you need to take it up with your supplier. If they've already had it once and sent it back in the same state then you need to tell them that, not us!
They got to replace it. It's unusable in that state and no amount of software or tweaking will make the screen suddenly work for you.
i think the easies way is to send it for repair,
if i were you, i would do my best to identify the problem cause and be able to reproduce it whenever i want so i can go there to HTC and prove it.
johncmolyneux said:
They got to replace it. It's unusable in that state and no amount of software or tweaking will make the screen suddenly work for you.
Click to expand...
Click to collapse
Thank you for your reply, too bad the servicemen don't share this opinion, and the thing is more complicated due to the fact that I live in other country and have to ask some ppl to get the device delivered, and due to the random nature of the problem, it is really complicated;
the meaning of this thread was to identify, maybe someone has met such things, and knows what exactly causes the fault, so I don't receive the device the second time with "resoft" written on the service ticket...
anaadoul said:
i think the easies way is to send it for repair,
if i were you, i would do my best to identify the problem cause and be able to reproduce it whenever i want so i can go there to HTC and prove it.
Click to expand...
Click to collapse
that's exactly what I'm trying here - to identify the problem and get some proof, I can't go there by myself, we don't have an official HTC service - the nearest one is in Romania