Hi .my english no good. I upgrading my htc. this file is corrupted . i asked pro . he says your device locked. install USR. i intall usr. next next next... my htc not opening. black screen. i am not open bootloder mode. i am not start hard reset. but i set usb cable and sound come but i am not open bootlodaer. please help me ?
interesting i take out battery. i dont push the opening button . but i set usb cable and sounds hail from computer?? i am not enter bootloader mode.
this error :
you need to enter bootloader before flashing an RUU.
Hold the camera button and reset.
And by the way, your "Pro" obviously didn't know about aserg's method.
Related
i flashed it with a rom i was trying to make
and now is completly dead
plz i need help how i can fix it
plzzz
can you get into bootloader mode? found this in 1 of the forums!!!
your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
dunno if this will help you or not but it worked for me..
Good Luck!
KevandLynds said:
can you get into bootloader mode? found this in 1 of the forums!!!
your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
dunno if this will help you or not but it worked for me..
Good Luck!
Click to expand...
Click to collapse
thanx.. i know about the boot loader...
unfortinatly i can't and the problem is mine is o2-xda-orbit and and it's not sold in my country ... i'm really don't know what to do.
maybe htc can fix it ... hopefully
finally problem solved....
i pushed the camera and power bottom together
and then it started with the bootloader
and there was the original shipped rom on the memory and now it's back
I have a problem with my device.I thought maybe someone could help me.
The problem is that the device stuck at the boot screen (shown in screen) and I can't install windows or something,because when i turn the bootloader mode it's shows that it's connected to the pc,but it's actually not,PC not even shows that the device is connected.
I have second battery,but that doesn't changes anything..
Could someone please help me?
More info please!
What Operation System is running your PC?
Is it connected to a "powered" USB (like on the back of your PC)
As far as i can see you have a G4 phone, patched with an .Olip.
You should _only_ flash it with G4-aware ROMs!!!
Windows 7
I think i tried on xp to..
tried to the front ant back to.
Ah
You tried it with XP too?
The colored boot state doesn't say anything.
It's just saying that RUU put your device into this state.
With XP this state would soon turn into an upload screen.
"tried to the front ant back to."
Yes, the front USB may or may not have enough power
So let's try XP and backside USB!
For me it sometimes worked after rebooting XP.
ok,I will try on xp and on the USB in the back,and I tell you the results.
So I have tried to install on xp,but it can't verify the device,like it's not connected,it even won't make a sound that it's connected.Any suggestions?
Could anyone help me?
Let us know what ROM you’re trying to install, and let us know if you’re putting the phone in boot loader mode yourself, or if the phone boots and goes to the boot loader on its own, as this can sometimes cause a connection problem.
Well I installed a ROM earlier,when i turn on the phone i get the screen in the pick and nothing else,if I go to bootloader mode it won't connect to the pc.I have no idea what to do,please help.
Try this.
1. Download “Wizard Love ROM”.
2. Press the soft reset button, then press and hold the camera key, you shouldn’t see any splash screens, it should go straight to the boot loader, if not try again.
3. Connect the phone to the PC, you will see “USB” in the lower left corner, if not repeat step two.
4. Now flash the Wizard Love ROM.
Hope that helps
That's the point.I know how to enter to bootloader and all that,but when i do,it won't connect to the pc.
i can't believe it.It just start working again.by it self.And booting normaly.But i'm still interested why he was stuck..
Hi guys,,, just bought myself a X10i to play with,,, figured I,ve flash the thing with a rom from the developers forum,
This is where I came unstuck,,,, cant for the life of me get it into flash mode.
Instructions were as follows
1 With fone OFF. Hold down back button and insert usb cable, green light comes on and hit enter. What bloody enter, on the fone or on your keyboard. I,ve tried both, fone just keeps on booting into the main screen, nothing even resembles a flash mode screen. Tried this untill my thumb nearly bled.
Someone help please.
Read the tuts in the dev forum. P.S. no custom roms yet but there is root.
TrevvyD said:
Hi guys,,, just bought myself a X10i to play with,,, figured I,ve flash the thing with a rom from the developers forum,
This is where I came unstuck,,,, cant for the life of me get it into flash mode.
Instructions were as follows
1 With fone OFF. Hold down back button and insert usb cable, green light comes on and hit enter. What bloody enter, on the fone or on your keyboard. I,ve tried both, fone just keeps on booting into the main screen, nothing even resembles a flash mode screen. Tried this untill my thumb nearly bled.
Someone help please.
Click to expand...
Click to collapse
Try hold down "back button" without battery then insert USB cable and then insert battery.
When it says to hit enter, that is to continue from the screen (on the PC) that says "press any key to continue" when you are doing the steps for rooting. If you don't have that window ready the phone will only stay in flash mode for about 5 seconds and then it will continue to boot. So, just make sure you are ready with the PC before entering flash mode.
Dr_Wolodya said:
Try hold down "back button" without battery then insert USB cable and then insert battery.
Click to expand...
Click to collapse
thanks!!
this really helps!
My phone is also x10i.I have trouble to enter in flash mode.It shows up the green LED but flash tool says it occurs error and plug your phone in flash mode.
What should I do?Help me , plz.
johnmin said:
My phone is also x10i.I have trouble to enter in flash mode.It shows up the green LED but flash tool says it occurs error and plug your phone in flash mode.
What should I do?Help me , plz.
Click to expand...
Click to collapse
check drivers (install SE PC suite and let it atleast detect the phone once in FLASH mode)...
also it might help to disable any antivirus (worked for me)
cannot enter the flash mode
Hi,
I know this post is pretty old, but still I'm struglig the second day now to get into flash mode and still no luck despite trying every method there is on the web.
I've got Xperia X10i mini pro, reinstalled standard ROM with PC companion just to make sure it's nothing with the software or any modifications I made to it.
I'm guiding myself with instruction given here:
wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Mini_Pro:_Full_Update_Guide
in order to get my bootloader unlocked
what I've done so far:
-installed Android SDK incl. SDK Tools, SDK Platform-tools, Google USB driver package. Not installed any API from SDK.
-put android_winusb.inf (18 KB size) in C:\android-sdk-windows\extras\google\usb_driver
-in general- everyting given here: wiki.cyanogenmod.com/wiki/Howto:_Install_the_Android_SDK#Windows
command
Code:
adb devices
rerurns
Code:
List of devices attached
43423531315537465737 device
in my opinion meaning it works as it should.
So I turn the phone off, unplug the cable both from computer and the phone, take the abttery out, plug both end of USB cable where these should be, hold the Back button (tried with Volume up too) and put the battery in.
The result is it only goes into flash mode for several seconds (confirmed by SuperOneClisk log) and then goes into charging mode. nothing gets displayed on the screen. Only when PC Companion is on it detects it, than looses it and pops up with a window on how to properly connect the device... :/
So can someone please tell me what I do wrong?
Why it doesn't stay in flash mode?
PS. when I enter *#*#7378423#*#* to access the service menu, after pressing the last * the numbers just disappear and nothing happens...
Pls help
Edit:
I somehow got around that with s1tool and Flashtool. But eventually I could not go along the way given at cyanogenmod.com and unlocked with the help of this: http://forum.xda-developers.com/showthread.php?t=1254225
Hello!
As title says i bricked my Axon :crying:
I followed http://forum.xda-developers.com/showpost.php?p=68738854&postcount=100 (and the german one that linked to this one) but couldnt do the fastboot unlock.
So i couldnt finish this and my phone required a pin number to start android: bootet and started up but wanted a pin code to start/enter system.
Wasnt able to fix that with googling for answers so i went back to edl mode and rewrote my backup boot/recovery images with axon7backup.
Had no errors with that but it wont start now:
After the ZTE Logo the display goes black but it connects as "handset diagnostic interface (DFU) (ComX)" to my computer.
I fiddled around with driver installing etc and forced the HS-USB QDLoader 9008 on it but no luck, axon7backup/root can not connect.
When i did the actual flashing yesterday it never connected with the hold both vol-keys and connect usb way either, always had to reboot into edl via adb.
I cant boot anything else (no twrp/recovery) it just goes to the diagnostic interface mode.
Thanks in advance
you can try to get into adb mode with this:
- power off your device
- hold the vol down key while plugin in the usb-c cable (connected to your pc)
- keep holding
- you should get a white box with FTM factory test mode
- you are free to use adb again - so you can get into edl mode as well....
for pin part that'S normal while unlocking your device encryption gets deleted and you have to abort and factory reset your device in twrp....
Starvirus said:
you can try to get into adb mode with this:
- power off your device
- hold the vol down key while plugin in the usb-c cable (connected to your pc)
- keep holding
- you should get a white box with FTM factory test mode
- you are free to use adb again - so you can get into edl mode as well....
for pin part that'S normal while unlocking your device encryption gets deleted and you have to abort and factory reset your device in twrp....
Click to expand...
Click to collapse
Thanks. I tried it but it wont go to FTM. Only goes to diagnostic com port.
It seems i cant even turn it off. The little red light on the front is on the whole time .
sadly the disadvantage of a built in battery, so you have to wait till the battery is empty and try my instructions then....if it's not realy off it won't work, the mode you are currently in you usually only reach if you switch it on while holding both volume buttons, the edl mode is sadly not reachable with a key combination directly on G models.
adb don't show your device?
Starvirus said:
sadly the disadvantage of a built in battery, so you have to wait till the battery is empty and try my instructions then....if it's not realy off it won't work, the mode you are currently in you usually only reach if you switch it on while holding both volume buttons, the edl mode is sadly not reachable with a key combination directly on G models.
Click to expand...
Click to collapse
Oh ok. I expected ftm to work from vol-down and power-button till restart.
@adb: sadly no connection possible since it goes straight to Comport Connection.
Edit:
Couldnt make that work. It was off and i connected the usb. So it showed me the loading battery picture where i cant do anything. held the vol-down the whole time. But as soon as it had some battery it went straight to comport-connection again
im sorry to say, but ur device is bricked to a degree where you would need ZTEs Flashtool to fix it. Unfortunately we dont have that tool, so you might have to send it in
i have the same exact problem :'(
Have u been able to fix it?? I'm in a situation that i cant even send it to ZTE to fix it :'(
nsabir said:
i have the same exact problem :'(
Have u been able to fix it?? I'm in a situation that i cant even send it to ZTE to fix it :'(
Click to expand...
Click to collapse
Hi,
couldnt fix it myself so i had to send it in.
Unless some tool/rom was released in the last few months to fix it yourself i would guess your device is bricked.
Hi I have almost the same problem, I tried to unlock bootloader and now I don't have the recovery, I can boot and use my mobile but I can't restore it or update it because I don't have the recovery
I try whit axon7tool to restore the recovery but I got a error.
MaxRink said:
im sorry to say, but ur device is bricked to a degree where you would need ZTEs Flashtool to fix it. Unfortunately we dont have that tool, so you might have to send it in
Click to expand...
Click to collapse
Hi, do you have any idea, if there will be such a flashtool to work with DFU mode? I'm thinking that there are a lot of guys have bricked their devices (including me).
((
Hello guys, how are you today ?
I will do my best to write properly (french, sad)
So, i unlocked my phone with no problem. I tried to install a working TWRP. The ADB command to install was easy, but impossible to boot in twrp with the boot command on ADB.
I understood that i just needed to press up and power to open TWRP.
I putted on my OTG USB KEY the xiaomi.eu weekly ROM for my phone.
I formated only DATA, and i began the installation.
I had an error, and after my OTG was not recognize.
I just putted up and power to reboot the phone and try again.
But i dont know what happened, black screen, impossible to boot on something, i tryed to hold power 15 sec and nothing work, impossible to go to fastboot mode.
The phone is recognized on windows but nothing more.
I searched on the net and my phone is bricked. I need to open it to press ELD.
I found someone who has ELD permission for 12$.
Now i just want to know if someone can explain me how to open without damage the phone and how to be in ELD mode.
Thanks you and have a nice day.
I guess you could try to buy an EDL cable instead.
How you see phone in device manager?
newhope81 said:
Hello guys, how are you today ?
I will do my best to write properly (french, sad)
So, i unlocked my phone with no problem. I tried to install a working TWRP. The ADB command to install was easy, but impossible to boot in twrp with the boot command on ADB.
I understood that i just needed to press up and power to open TWRP.
I putted on my OTG USB KEY the xiaomi.eu weekly ROM for my phone.
I formated only DATA, and i began the installation.
I had an error, and after my OTG was not recognize.
I just putted up and power to reboot the phone and try again.
But i dont know what happened, black screen, impossible to boot on something, i tryed to hold power 15 sec and nothing work, impossible to go to fastboot mode.
The phone is recognized on windows but nothing more.
I searched on the net and my phone is bricked. I need to open it to press ELD.
I found someone who has ELD permission for 12$.
Now i just want to know if someone can explain me how to open without damage the phone and how to be in ELD mode.
Thanks you and have a nice day.
Click to expand...
Click to collapse
Can you get into fastboot
My phone was completely stuck in black screen impossible to go on fastboot mode.
Luckely, i dont know how but my phone was recognized like if i was in EDL mode.
I contacted an asian man on WhatsApp, he putted his logs on miflash to allowed EDL flash.
My phone is Alive now!
Where Can i buy an EDL cable if i need it ? It replace the open of the phone?