Database Users

HTC 8125 boot problem PLEASE HELP!

I have a problem with my device.I thought maybe someone could help me.
The problem is that the device stuck at the boot screen (shown in screen) and I can't install windows or something,because when i turn the bootloader mode it's shows that it's connected to the pc,but it's actually not,PC not even shows that the device is connected.
I have second battery,but that doesn't changes anything..
Could someone please help me?

More info please!
What Operation System is running your PC?
Is it connected to a "powered" USB (like on the back of your PC)
As far as i can see you have a G4 phone, patched with an .Olip.
You should _only_ flash it with G4-aware ROMs!!!

Windows 7
I think i tried on xp to..
tried to the front ant back to.

Ah
You tried it with XP too?
The colored boot state doesn't say anything.
It's just saying that RUU put your device into this state.
With XP this state would soon turn into an upload screen.
"tried to the front ant back to."
Yes, the front USB may or may not have enough power
So let's try XP and backside USB!
For me it sometimes worked after rebooting XP.

ok,I will try on xp and on the USB in the back,and I tell you the results.

So I have tried to install on xp,but it can't verify the device,like it's not connected,it even won't make a sound that it's connected.Any suggestions?

Could anyone help me?

Let us know what ROM you’re trying to install, and let us know if you’re putting the phone in boot loader mode yourself, or if the phone boots and goes to the boot loader on its own, as this can sometimes cause a connection problem.

Well I installed a ROM earlier,when i turn on the phone i get the screen in the pick and nothing else,if I go to bootloader mode it won't connect to the pc.I have no idea what to do,please help.

Try this.
1. Download “Wizard Love ROM”.
2. Press the soft reset button, then press and hold the camera key, you shouldn’t see any splash screens, it should go straight to the boot loader, if not try again.
3. Connect the phone to the PC, you will see “USB” in the lower left corner, if not repeat step two.
4. Now flash the Wizard Love ROM.
Hope that helps

That's the point.I know how to enter to bootloader and all that,but when i do,it won't connect to the pc.

i can't believe it.It just start working again.by it self.And booting normaly.But i'm still interested why he was stuck..

[q] problems with lg gt540

hi guys.. could you help me with my problem.!
I have an LG GT540 android 1.6 firmware version(stock)
So here are my problems:
1. I tried to upgrade it from 1.6 to 2.1 using this tutorial http://forum.xda-developers.com/show...27&postcount=3 thanks to lavero.burgos for posting it, I was successful at first part, but I cant follow the next because my device wont go to fast boot,, I tried putting it off, then camera+poweron but it doesnt do anything. It doesn't light, no lg logo appears, just nothing although the computer can read the drive when I connect it through usb. So I cannot flash it to 2.3,2.3 because it just wont go to fastboot.
2. When I turn it on normally, It takes long before it response like after 30sec to light, but just light, no lg logo appears although it wasnt bricked because I can use it normally after just waiting to on.(annoying)
3. Since I upgraded it to 2.1, I lost all 3rd party application and the internal apps were the only left, so I copied all my saved apps (.apk) to my sd card but the problem is there is no saved app on my phone to read and install those apps from my sd card.(irritating)
4. My device wont read my sim card, when I start it it says "sim card unprovisioned" so basically I cant connect to mobile networks here in the philippines(im using globe telecom). I feel that Im stucked in the middle of nowhere since I cannot contact and txt all my family and friends.
5. I cant connect to wifi,, when my device detects wi-fi, I try to connect to it but from the log it only try to connect but doesn't obtain the ip address. Even when the wi-fi signal is strong, it does the same thing.
So please help me guys,,I want to hear from my fellow xda-developers badly,,,
PS. also those who have problems with their LG GT540 pls feel free to post and share it with us here... thank you all guys in advance....

hi so let me get it right the phone is working (can turn on and use but cant call) yes? hmmmmm..... try this
MUST DOWNLOAD THIS DRIVERS!!!!
http://dottech.org/android/26188/usb-adb-and-fastboot-drivers-for-windows-for-all-android-phones/
Step one!
1.turn off phone.
2.hold the POWER button till you feel the beep.
3.let go of the POWER button when you feel the beep and hold onto the CAMERA button only.
4.hopefully it turns on to a blackscreen and nothing else(fastboot)
5.unzip this CLICK ME!! to desktop and open the flash all no wipe file
or......
1.turn on your phone.
2.go to settings>applications>development>tick the usb debugging
3.connect phone to computer (make sure phone is on)
4.unzip this CLICK ME!! to desktop and open the flash all no wipe file
5. phone should boot into blackscreen like the one above......
Click to expand...
Click to collapse
Step 2!
both should flash a recovery image. Next
1.make sure the phone is off
2.press POWER button
3.when you feel the beep let go of POWER button and press the HOME button only.
4.phone should boot into recovery mode.
5.take out battery again
6. download a rom into the sdcard using computer
7.go to recovery again using the steps above (steps 1 to 4)
8.select wipe all data factory reset or something like that....
9.install zip from sdcard
10.select from sdcard
11.choose the file you downloaded
12.finish flash and reboot phone.
Click to expand...
Click to collapse

excellent guide! big thanx

bs828 said:
hi so let me get it right the phone is working (can turn on and use but cant call) yes? hmmmmm..... try this
MUST DOWNLOAD THIS DRIVERS!!!!
http://dottech.org/android/26188/usb-adb-and-fastboot-drivers-for-windows-for-all-android-phones/
Click to expand...
Click to collapse
Thanks,, Ive tried the 2nd option on step one and i think my phone successfully got to fastboot(just clean blank screen) so the cmd automatically run and states
C:\Desktop\adb rebootloader
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: protocol fault <no status>
C:\Desktop\fastboot flash recovery recovery.img
< waiting for device >
Did I miss something???

ok try again this time with the phone turned on. and then run the script and did you install the drivers?

bs828 said:
ok try again this time with the phone turned on. and then run the script and did you install the drivers?
Click to expand...
Click to collapse
yeah I installed the drivers...

hmmm maybe there are no fastboot drivers(main suspect....) there are a few ways to get it but for mine i just plug my phone in to my pc (windows 7 64bit) it just recognize it and tries to get the "google fastboot interface" drivers from windows update...

Try Volume Up+Search Key+Power to go into Fast boot Mode, There's different keys to activate Fastboot Mode (There is different versions of Fastboot)
Sent from my LG GT540 CM9 PreRC Polish Blood using xda premium

Your phone is/was bricked
Hey, I'm sorry to bing back such an old thread, but I just wanted to say this for posterity: your phone has/had a soft-brick. This means: you can't see Android nor LG boot logos, can't enter Recovery and (maybe) can't access Fastboot, but I'm not too sure on that last one. Besides that, the phone works "okay", but you should try to fix it.
Basically this soft-brick is almost always caught when upgrading from 1.6 to 2.1, so everyone should have it, including me. It took me a whole year to realize how to friggin' fix it lol, but here goes what I did:
Thanks for your help everyone, I came to a solution after a full year lol. Here's my enlightenment, from another Thread:
------------------------------------------------------------------------------------------
Just wanted to leave my 2 cents here, I've been trying to do my best since around august 2014, no success. 2 days ago I retried this, and I DID IT! I will tell everyone what I did very shortly:
My problem that I solved: I can boot, device works like a charm. But: no boot logos, no recovery.
My solution for TL;DR: UNINSTALL ALL DRIVERS FROM DEVICE MANAGER 1ST, then reinstall. After that, flash a fastboot ROM and use it to WIPE ALL THE DATA IN YOUR PHONE! THIS was what I needed and was never explained: you had to WIPE the old data in order to get the boot screens back.
IN THIS ORDER (THANK YOU to those people from previous replies, gathering all your info was of great value):
Uninstall all of your phone drivers from your PC!!! This is what made most of my headaches go away, just use Device Manager and uninstall anything from LGE. After that, plug in your device in your USB ports (always BACK ports, not front ports, important). It should detect all drivers and download them.
IF it fails (it generally does with LGE USB Modem), you can go to Device Manager > Unknown Device (the one that wasn't recognized) > Right Click and Update > Choose 2nd option, then choose "choose from a list of local controllers" (or whatever the button says). After that, scroll down to LG Electronics, Inc. and install what didn't install.
I also found these drivers, but I did not test them: http://www.mediafire.com/download/p693hcz6kkouh19/USB_Driver_LG_GT540.zip
Huzzah!
Now you're set to begin:
FIRST thing you wanna do is a factory reset, this is something I'd forgotten with time, don't make the same mistake as I did. You can do it by turning your phone on and pressing Volume +/- & Home & Quick Search buttons all together for 5 seconds (it works, be patient and wait for it, even if you open the camera or any other stuff).
Download this Google SDK Tools (unzip and put the folder in C:\ drive) and this Fastboot drivers for GT540 (unzip and put the files inside the folder in C:\android-sdk).
Skip this next line if you know your ROM has fastboot.
Now, if you don't have a ROM with fastboot, I recommend you use either European Open+Fastboot or V20C Orange France Fastboot ROM.
Click to expand...
Click to collapse
Since you have Fastboot enabled, now all you need to do is turn off your device (all this with its battery on it, no weird things) and hold the Camera button before turning it back on. This should take you either to a black screen, or simply to no display, like me. Either one will work anyways.
Now press the Windows key > Type cmd and open it with Right Click > Run as Administrator.
In it, type all this, command by command (you can paste by right clicking):
cd C:\android-sdk
fastboot -w
fastboot erase boot
fastboot erase system
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
And now it's go time! Do what everyone else says in here: Take out your phone's battery, SD and SIM cards, fire KDZ Updater up as Administrator (If your KDZ freezes, then it's either faulty or you did not install msxml, look for a good KDZ that comes with that file and delete your current one), choose CS_Emergency PhoneMode and:
1-Plug your phone while holding the volume DOWN button (don't worry! My phone didn't show "Download Mode" either, if you hear the Windows "Somethingpluggedin" Bump noise, it's ok).
2-Flash French V20A
3-Unplug your phone once KDZ says "==FINISHED==".
4-Plug it once again, holding the volume DOWN button.
5-Flash out.kdz (remember! it's CS_Emergency).
Click to expand...
Click to collapse
THANK YOU XDA!
--------------------------------------------------------------------------------------
Also, if you look in here you'll find how to flash an awesome ROM, Cyanogen Mod 10 (should say "Final Version#2).

[Q] I can't enter the download mode.Phone is always open screen is black. QHSUSB_BULK

LG G2 D802
Hello i flashed "Full-CM12-21-03-15-Modem-Bacon-flashable" because of "Error Executing updater binary in zip " with TWRP to my LG G2 D802 by an error .The zip was for oneplus one. i didn't see that. I can't power off my phone. Phone is always open and screen is always black when I insert the cable to pc pc plays hardware plugged vioce this is the only thing that works. The phone seems "QHSUSB_BULK" in the device management but i cant see it at disk management list. I tried everything the phone is still waiting open position . How can i enter download mode or any other method to fix my phone? Please Help

Long press on power button till phone is off. Then enter to the recovery and try to install another Rom. if you have OTG memory, use it.

it doesn't work pc see phone as "QHSUS_BULK"
sanguchez_sdd3 said:
Long press on power button till phone is off. Then enter to the recovery and try to install another Rom. if you have OTG memory, use it.
Click to expand...
Click to collapse
it doesn't work pc see phone as "QHSUS_BULK"

Take a look at this http://forum.xda-developers.com/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627 hope it works.

Bricked A2017G B03 - help please

Hello!
As title says i bricked my Axon :crying:
I followed http://forum.xda-developers.com/showpost.php?p=68738854&postcount=100 (and the german one that linked to this one) but couldnt do the fastboot unlock.
So i couldnt finish this and my phone required a pin number to start android: bootet and started up but wanted a pin code to start/enter system.
Wasnt able to fix that with googling for answers so i went back to edl mode and rewrote my backup boot/recovery images with axon7backup.
Had no errors with that but it wont start now:
After the ZTE Logo the display goes black but it connects as "handset diagnostic interface (DFU) (ComX)" to my computer.
I fiddled around with driver installing etc and forced the HS-USB QDLoader 9008 on it but no luck, axon7backup/root can not connect.
When i did the actual flashing yesterday it never connected with the hold both vol-keys and connect usb way either, always had to reboot into edl via adb.
I cant boot anything else (no twrp/recovery) it just goes to the diagnostic interface mode.
Thanks in advance

you can try to get into adb mode with this:
- power off your device
- hold the vol down key while plugin in the usb-c cable (connected to your pc)
- keep holding
- you should get a white box with FTM factory test mode
- you are free to use adb again - so you can get into edl mode as well....
for pin part that'S normal while unlocking your device encryption gets deleted and you have to abort and factory reset your device in twrp....

Starvirus said:
you can try to get into adb mode with this:
- power off your device
- hold the vol down key while plugin in the usb-c cable (connected to your pc)
- keep holding
- you should get a white box with FTM factory test mode
- you are free to use adb again - so you can get into edl mode as well....
for pin part that'S normal while unlocking your device encryption gets deleted and you have to abort and factory reset your device in twrp....
Click to expand...
Click to collapse
Thanks. I tried it but it wont go to FTM. Only goes to diagnostic com port.
It seems i cant even turn it off. The little red light on the front is on the whole time .

sadly the disadvantage of a built in battery, so you have to wait till the battery is empty and try my instructions then....if it's not realy off it won't work, the mode you are currently in you usually only reach if you switch it on while holding both volume buttons, the edl mode is sadly not reachable with a key combination directly on G models.

adb don't show your device?

Starvirus said:
sadly the disadvantage of a built in battery, so you have to wait till the battery is empty and try my instructions then....if it's not realy off it won't work, the mode you are currently in you usually only reach if you switch it on while holding both volume buttons, the edl mode is sadly not reachable with a key combination directly on G models.
Click to expand...
Click to collapse
Oh ok. I expected ftm to work from vol-down and power-button till restart.
@adb: sadly no connection possible since it goes straight to Comport Connection.
Edit:
Couldnt make that work. It was off and i connected the usb. So it showed me the loading battery picture where i cant do anything. held the vol-down the whole time. But as soon as it had some battery it went straight to comport-connection again

im sorry to say, but ur device is bricked to a degree where you would need ZTEs Flashtool to fix it. Unfortunately we dont have that tool, so you might have to send it in

i have the same exact problem :'(
Have u been able to fix it?? I'm in a situation that i cant even send it to ZTE to fix it :'(

nsabir said:
i have the same exact problem :'(
Have u been able to fix it?? I'm in a situation that i cant even send it to ZTE to fix it :'(
Click to expand...
Click to collapse
Hi,
couldnt fix it myself so i had to send it in.
Unless some tool/rom was released in the last few months to fix it yourself i would guess your device is bricked.

Hi I have almost the same problem, I tried to unlock bootloader and now I don't have the recovery, I can boot and use my mobile but I can't restore it or update it because I don't have the recovery
I try whit axon7tool to restore the recovery but I got a error.

MaxRink said:
im sorry to say, but ur device is bricked to a degree where you would need ZTEs Flashtool to fix it. Unfortunately we dont have that tool, so you might have to send it in
Click to expand...
Click to collapse
Hi, do you have any idea, if there will be such a flashtool to work with DFU mode? I'm thinking that there are a lot of guys have bricked their devices (including me).
((

Issues with Recovery Mode, Bootlooping, Flashing, EDL, and ADB Commands

Not sure how to title this forum post, but this is the best I got. Forgive my ignorance and lack of knowledge on these topics.
I was trying to root my Axon 7 mini. After some searching to find out how to unlock the bootloader (like needing JDK, older Android SDK version to run android.bat, etc.), I finally got it to work. Ran Recovery to "apply update from SD Card" (can not remember the file right now) and was then ready to load TWRP Recovery. When I rebooted to the recovery TWRP image, it told me something failed and the phone had to be factory reset. I took my SD card out in fear of my data being deleted and "accidentally" clicked the power button. It then reloaded with a password prompt where I typed some random password (1234 because I never set a pin password nor knew what to do here), clicked submit, and then gave me some error; now my phone doesn't work.
The Problem:
- I can enter bootloader, sometimes, but can only run fastboot commands; adb device does not detect phone so can't run adb commands (always says the server is old or something and reloads daemon successfully but never finds my device regardless). Also, I don't think I can get it to run in EDL mode; MiFlash gives out errors too when trying to flash recovery images.
- Recovery mode doesn't appear or work; not sure if the MiFavor command prompts on the phone is recovery or not, but it's safe to say this no longer appears. This is also where I believe the phone bootloops. I can get the fastboot commands to flash a TWRP recovery, but it never actually enters the TWRP dashboard.
- Can not turn off the phone... I think. None of the command options that appear on-phone shut it off; however, when the screen does stay black, I'm not sure if it's in EDL mode or plainly off.
- Device Manager shows the phone as different stuff (namely Kedacom USB Device and Portable Devices/MTB USB Device). Sometimes Qualcomm appears, but it depends. More often than not, when my device does appear, there's either an error code (like Code 10, Code 43) and/or the device is grayed out.
Conclusion:
I just want to get my phone to work normally again, if possible. Currently, I locked the oem to see if fastboot commands could still work and now I'm stuck at the ZTE logo, so can't try to unlock it right now. What are the proper tools, drivers, programs, etc I need to get this phone back to normal? I've scoured the web and these forums for 2 days now with no luck and lots of either missing info or obscure info.
I bought this at Best Buy, so I'm assuming it's US Axon7 Mini version in terms of drivers (not sure if the box specifies any info that could be useful here).

Un-brick Axon 7 Mini
Dear all,
I experienced the same issue with my phone after I tried to flash it with custom ROMs and recovery.
I thought I lost it as I was not able to enter adb mode (not recognized on the PC) or even not able to enter EDL mode with the button combination so not able to do anything with it.
Only watch it boot and display the ZTE logo.
After some research, here is what I had to do to get it recovered.
First thing you need to get is an EDL cable.
I let you search on your favorite site. Mine was a Generic eDL Deep Flash Qualcomm 9008 Cable 2 in 1 for Z3 X/Octopus.
Until you receive it, make sure you have the latest Qualcomm drivers installed on your PC.
You can find it easily.
Then, connect your phone and your PC with the EDL cable.
Press the button on your EDL cable (there should be one) for a few seconds and keep it pressed.
Then, press the power button and keep it pressed for at least 20 seconds.
At this stage, you should have both buttons pressed and after some time, you should feel the phone rebooting.
After 20 seconds, release the power button.
Then, after 10 other seconds, release the EDL cable button.
At this stage, your phone screen should stay black and your phone should appear in the device manager as Qualcomm USBHUB (or somehting similar)
You are in EDL mode and should be able to perform a recovery flashing using tuliptool.
Then I followed the steps I found here:
https://forum.xda-developers.com/axon-7-mini/how-to/updating-uk-version-zte-axon-7-mini-to-t3717933
If you are still stuck, pm me.
Be patient, all will be fine,

mariegalante55 said:
Dear all,
I experienced the same issue with my phone after I tried to flash it with custom ROMs and recovery.
I thought I lost it as I was not able to enter adb mode (not recognized on the PC) or even not able to enter EDL mode with the button combination so not able to do anything with it.
Only watch it boot and display the ZTE logo.
After some research, here is what I had to do to get it recovered.
First thing you need to get is an EDL cable.
I let you search on your favorite site. Mine was a Generic eDL Deep Flash Qualcomm 9008 Cable 2 in 1 for Z3 X/Octopus.
Until you receive it, make sure you have the latest Qualcomm drivers installed on your PC.
You can find it easily.
Then, connect your phone and your PC with the EDL cable.
Press the button on your EDL cable (there should be one) for a few seconds and keep it pressed.
Then, press the power button and keep it pressed for at least 20 seconds.
At this stage, you should have both buttons pressed and after some time, you should feel the phone rebooting.
After 20 seconds, release the power button.
Then, after 10 other seconds, release the EDL cable button.
At this stage, your phone screen should stay black and your phone should appear in the device manager as Qualcomm USBHUB (or somehting similar)
You are in EDL mode and should be able to perform a recovery flashing using tuliptool.
Then I followed the steps I found here:
https://forum.xda-developers.com/axon-7-mini/how-to/updating-uk-version-zte-axon-7-mini-to-t3717933
If you are still stuck, pm me.
Be patient, all will be fine,
Click to expand...
Click to collapse
I had a feeling an EDL cable was my only option left given everything I've looked up and the multiple methods I've tried. Wanted to avoid spending money on one but doesn't look like I have a choice given the circumstances - oh well. Regardless, thank you for the response and advice. Have to wait a while, though, to get the cable and test to see if this works.
If anyone else ever ends up in the same royally screwed situation as me, getting an EDL cable - or DIY one if you wanna be cheap and are confident enough to do so - is probably your saving grace.

Kuma21 said:
I had a feeling an EDL cable was my only option left given everything I've looked up and the multiple methods I've tried. Wanted to avoid spending money on one but doesn't look like I have a choice given the circumstances - oh well. Regardless, thank you for the response and advice. Have to wait a while, though, to get the cable and test to see if this works.
If anyone else ever ends up in the same royally screwed situation as me, getting an EDL cable - or DIY one if you wanna be cheap and are confident enough to do so - is probably your saving grace.
Click to expand...
Click to collapse
K, I can get tuliptool to work and run command, but i keep getting a "Failed: Unkown Error" response everytime i run a command. Can't unlock my bootloader, nor write a recovery disk due to this error. does anyone have any idea why this happens?