I have a problem with my device.I thought maybe someone could help me.
The problem is that the device stuck at the boot screen (shown in screen) and I can't install windows or something,because when i turn the bootloader mode it's shows that it's connected to the pc,but it's actually not,PC not even shows that the device is connected.
I have second battery,but that doesn't changes anything..
Could someone please help me?
More info please!
What Operation System is running your PC?
Is it connected to a "powered" USB (like on the back of your PC)
As far as i can see you have a G4 phone, patched with an .Olip.
You should _only_ flash it with G4-aware ROMs!!!
Windows 7
I think i tried on xp to..
tried to the front ant back to.
Ah
You tried it with XP too?
The colored boot state doesn't say anything.
It's just saying that RUU put your device into this state.
With XP this state would soon turn into an upload screen.
"tried to the front ant back to."
Yes, the front USB may or may not have enough power
So let's try XP and backside USB!
For me it sometimes worked after rebooting XP.
ok,I will try on xp and on the USB in the back,and I tell you the results.
So I have tried to install on xp,but it can't verify the device,like it's not connected,it even won't make a sound that it's connected.Any suggestions?
Could anyone help me?
Let us know what ROM you’re trying to install, and let us know if you’re putting the phone in boot loader mode yourself, or if the phone boots and goes to the boot loader on its own, as this can sometimes cause a connection problem.
Well I installed a ROM earlier,when i turn on the phone i get the screen in the pick and nothing else,if I go to bootloader mode it won't connect to the pc.I have no idea what to do,please help.
Try this.
1. Download “Wizard Love ROM”.
2. Press the soft reset button, then press and hold the camera key, you shouldn’t see any splash screens, it should go straight to the boot loader, if not try again.
3. Connect the phone to the PC, you will see “USB” in the lower left corner, if not repeat step two.
4. Now flash the Wizard Love ROM.
Hope that helps
That's the point.I know how to enter to bootloader and all that,but when i do,it won't connect to the pc.
i can't believe it.It just start working again.by it self.And booting normaly.But i'm still interested why he was stuck..
Related
I wuz flashing it went to 99% and gave me an error so I reset and it wuz still stuck so I took out the battery and now it won't do anything when I plug it into the pc it says unrecognized usb device is there anyway to get the pc to recognize it so I can fix it any help is appreciated
bootloader
Put it into the bootloader, the PC wont recognize the device until you flash it again, but you should be able to fix it. Get into the bootloader by pressing the power key and the voice commander button (looks like an old tape) at the same time and while holding, press the soft reset button on the bottom. This should put you into the bootloader mode, (the backlight does not light up, it just says bootloader and USB or SERIAL in faint writing depending if you have it attached to your PC)
invoking boot loader
Yes...I had a similar issue yesterday and thought to use the button sequence to force the bootloader. The other thing I had to do was get a flashlight and note the bootloader version of 2.05. I then ran the latest update tool from one of the kitchens and that allowed me to load the image of choice that I placed in the same folder.
how did you do it?
I used UNI_bootloader EXIT.exe to get mine back. same situation, v2.05 bootloader, unplugged at 99%. stuck at v2.05. run the exe, and its fine.
Sadly enough i need to post this.. i have both the 6800 and the 6700, i did the same thing twice ... starting with the 6800, had no problem fixing that one, but the 6700 for some reason after a stock rom flash that didnt take completely its stuck saying Serial (top), 1.00 (bottom) , tried uni_bootloader, tried reflashing, for some reason it cannot catch the device, however, the drivers are loaded just fine, that much i know it worked before. any ideas on how to kick start this thing ( i have no memory card at all in it , havent been able to find a miniSD around here anywhere ). Any ideas would greatly help. Thanks in advance.
Hello everybody,
I have a problem with my Touch. A couple of days a go my phone was empty, when I tried to power it up again and start it, but then it hanged in the first screen (the T-mobile screen for my phone). I read a lot on this forum, but I'm a newbie so it's hard for me to find the good solution. I could get the phone in the bootloader ( triple color screen), but it doesn't give the RUU letters in the right corner. If I connect the phone threw usb to my computer, it doesn't give me anything. Active sync doesn't go green. I tried the following things,
1. Go in the bootloader (this works!)
2. Disable the USB connection in active sync
3. Start an USB-sniffer (didn't find my phone)
4. Tried to use MTTY (gives me the error, can't open USB connection, something like this)
5. Tried to flash a rom while in bootloader screen, but the flashing utility can't connect to my phone.
So the main problem is that the phone can't connect to the computer, what do I have to do, to put a new rom on my phone, so I can start the damn thing again??? Please help
Thanks
have you tried hard reset ?
still nothing
I also tried hard reset, still hangs in the first screen, there's also a new problem. I can't put it one, and when I put in the adapter (to charge) it give a red light (constant), what to do, what to do?
no tips?
nobody has any solutions?
Hi guys,,, just bought myself a X10i to play with,,, figured I,ve flash the thing with a rom from the developers forum,
This is where I came unstuck,,,, cant for the life of me get it into flash mode.
Instructions were as follows
1 With fone OFF. Hold down back button and insert usb cable, green light comes on and hit enter. What bloody enter, on the fone or on your keyboard. I,ve tried both, fone just keeps on booting into the main screen, nothing even resembles a flash mode screen. Tried this untill my thumb nearly bled.
Someone help please.
Read the tuts in the dev forum. P.S. no custom roms yet but there is root.
TrevvyD said:
Hi guys,,, just bought myself a X10i to play with,,, figured I,ve flash the thing with a rom from the developers forum,
This is where I came unstuck,,,, cant for the life of me get it into flash mode.
Instructions were as follows
1 With fone OFF. Hold down back button and insert usb cable, green light comes on and hit enter. What bloody enter, on the fone or on your keyboard. I,ve tried both, fone just keeps on booting into the main screen, nothing even resembles a flash mode screen. Tried this untill my thumb nearly bled.
Someone help please.
Click to expand...
Click to collapse
Try hold down "back button" without battery then insert USB cable and then insert battery.
When it says to hit enter, that is to continue from the screen (on the PC) that says "press any key to continue" when you are doing the steps for rooting. If you don't have that window ready the phone will only stay in flash mode for about 5 seconds and then it will continue to boot. So, just make sure you are ready with the PC before entering flash mode.
Dr_Wolodya said:
Try hold down "back button" without battery then insert USB cable and then insert battery.
Click to expand...
Click to collapse
thanks!!
this really helps!
My phone is also x10i.I have trouble to enter in flash mode.It shows up the green LED but flash tool says it occurs error and plug your phone in flash mode.
What should I do?Help me , plz.
johnmin said:
My phone is also x10i.I have trouble to enter in flash mode.It shows up the green LED but flash tool says it occurs error and plug your phone in flash mode.
What should I do?Help me , plz.
Click to expand...
Click to collapse
check drivers (install SE PC suite and let it atleast detect the phone once in FLASH mode)...
also it might help to disable any antivirus (worked for me)
cannot enter the flash mode
Hi,
I know this post is pretty old, but still I'm struglig the second day now to get into flash mode and still no luck despite trying every method there is on the web.
I've got Xperia X10i mini pro, reinstalled standard ROM with PC companion just to make sure it's nothing with the software or any modifications I made to it.
I'm guiding myself with instruction given here:
wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Mini_Pro:_Full_Update_Guide
in order to get my bootloader unlocked
what I've done so far:
-installed Android SDK incl. SDK Tools, SDK Platform-tools, Google USB driver package. Not installed any API from SDK.
-put android_winusb.inf (18 KB size) in C:\android-sdk-windows\extras\google\usb_driver
-in general- everyting given here: wiki.cyanogenmod.com/wiki/Howto:_Install_the_Android_SDK#Windows
command
Code:
adb devices
rerurns
Code:
List of devices attached
43423531315537465737 device
in my opinion meaning it works as it should.
So I turn the phone off, unplug the cable both from computer and the phone, take the abttery out, plug both end of USB cable where these should be, hold the Back button (tried with Volume up too) and put the battery in.
The result is it only goes into flash mode for several seconds (confirmed by SuperOneClisk log) and then goes into charging mode. nothing gets displayed on the screen. Only when PC Companion is on it detects it, than looses it and pops up with a window on how to properly connect the device... :/
So can someone please tell me what I do wrong?
Why it doesn't stay in flash mode?
PS. when I enter *#*#7378423#*#* to access the service menu, after pressing the last * the numbers just disappear and nothing happens...
Pls help
Edit:
I somehow got around that with s1tool and Flashtool. But eventually I could not go along the way given at cyanogenmod.com and unlocked with the help of this: http://forum.xda-developers.com/showthread.php?t=1254225
I too have a focus that is stuck in a loop at the Samsung logo. I bought it like that thinking I might be able to resurrect it as another toy. I have had lots of experience with Samsung, HTC and Sony droid phones, this would be the first WP.
It is a I917R on Rogers, there is no hardware revision under battery. I am assuming it is V1.3 as I have only seen software for the that version posted. I do not know how the phone got to its present state. They just said it happened during normal use?
I can get to both download mode and factory reset. I have flashed the stock rogers files without errors, but I never get the screen connecting to pc. The phone just restarts after successfully flashing, only to reboot continuously. I have been able to install MAGLDR and flashed every v1.3 ROM i could download. All without errors, just the same outcome they all just keep displaying Samung logo and then reboot. Only thing I noticed is that when I flash MAGLDR and custom ROMs it takes the phone longer to reboot.
I never get the connect to pc if I hold camera and power, nor do I ever get that screen when I flash a ROM.
Not sure if situation is similar... I am puzzled?
Your situation is very similar with other folks' here, unfortunately. It's not clear what causes it and there's no solution as of yet. For some, re-flashing worked. For others, a new battery. Most are stuck on loop...
When you connect the phone to USB when in download mode, what do you get?
When I boot to download mode I can flash Rom with WP7. I get to the yellow triangle download mode and flashes ok, no errors. Just noticed that it never goes to connect to pc mode.
Same with when I format, no connect to pc mode.
Nothing I try seems to help.
blackangel21 said:
When I boot to download mode I can flash Rom with WP7. I get to the yellow triangle download mode and flashes ok, no errors. Just noticed that it never goes to connect to pc mode.
Same with when I format, no connect to pc mode.
Nothing I try seems to help.
Click to expand...
Click to collapse
I see. What messages do you get when you connect the phone to the PC via USB, in either mode?
No messages, just shows up as Samsung USB composite device, Samsung mobile modem and Samsung mobile modem diagnostic serial port in download mode.
In magldr it shows up add Microsoft USB sync.
The only thing I forgot to mention was that when I flash with WP7 it finished without error in 90 seconds, but on the phone it says it will take 10 minutes.
Not sure what more I can add...
You could try different downloaders. Please see this thread for 7.41 downloader, maybe that helps?
Tried both, same outcome... No errors, just keeps rebooting... No Connect to PC message.
Im having the same problem. And i can see many other people who are having the same issue also. So i think its time to dump those phones, not worth a penny. The one i have in here was actually working, i followed all the directions in order to flash it. And still the phone got stuck into that bootloop. Its ridiculous from what i can see. I think ive read once you put that SDmini in it the phone will use it for the OS. But the one i had was working actually without it, i could turn it off as many times as i wanted and nothing happened. But if i tried a factory reset data would stay and diagnosis mode wasnt working. So i decided to flash it. Big, huge mistake! Hope you have better luck than i did. Because im dumping this one....
Same problem here, ive checked a couple of threads and no solution so far
Hi, this is my firt post, i'm going to quote this problem that's the same problem that I have...
"Device : Nexus 7
Problem : I was trying to unroot it and flash a 4.4.2 ROM to the device and i ended up bricking it somehow. I looked around a lot on here and youtube. I found one solution i had not tried which was to get into recovery mod. But the device was stuck on the boot loaded. So i hard shut it down, and pressed the key combination to load the boot loader. And, the screen wasn't loading. I heard the little chimes my computer makes when ever a USB device is active, so i heard the thing load into the boot loader. But its not showing on the screen!
Please help i really shouldn't have done this. But i am literally about to cry.
I tried using Wugfresh's Nexus toolkit to flash the ROM, and it would stop on sending system.
I dont know if i did something wrong, if the kernel was messed up, if the kit wasnt right, please as the video said there is 4 million members here. someone has to know what to do...
-Sean"
I did exactly the same thing that this guy did... ----> http://forum.xda-developers.com/showthread.php?t=2345874
The difference is that I don't live in USA and my Nexus doesn't have warranty... What can I do T.T my pc shows the tablet as Unknown Device and makes a sound when I puggle it, there has to be something that I can do >.<
EverAngelOn said:
Hi, this is my firt post, i'm going to quote this problem that's the same problem that I have...
"Device : Nexus 7
Problem : I was trying to unroot it and flash a 4.4.2 ROM to the device and i ended up bricking it somehow. I looked around a lot on here and youtube. I found one solution i had not tried which was to get into recovery mod. But the device was stuck on the boot loaded. So i hard shut it down, and pressed the key combination to load the boot loader. And, the screen wasn't loading. I heard the little chimes my computer makes when ever a USB device is active, so i heard the thing load into the boot loader. But its not showing on the screen!
Please help i really shouldn't have done this. But i am literally about to cry.
I tried using Wugfresh's Nexus toolkit to flash the ROM, and it would stop on sending system.
I dont know if i did something wrong, if the kernel was messed up, if the kit wasnt right, please as the video said there is 4 million members here. someone has to know what to do...
-Sean"
I did exactly the same thing that this guy did... ----> http://forum.xda-developers.com/showthread.php?t=2345874
The difference is that I don't live in USA and my Nexus doesn't have warranty... What can I do T.T my pc shows the tablet as Unknown Device and makes a sound when I puggle it, there has to be something that I can do >.<
Click to expand...
Click to collapse
Can you get into the bootloader still?
I can't
b3ltazar said:
Can you get into the bootloader still?
Click to expand...
Click to collapse
No, I can't. The screen is completely black.
Have you tried any of the suggestions in the thread you linked in the OP?
EverAngelOn said:
No, I can't. The screen is completely black.
Click to expand...
Click to collapse
Do you get a charging icon when you plug in the n7? did you try a diffrent cable?What exactly does ur computer do when you plug in the dead n7 (does it thy try to install a apx driver) Does toolkit see tablet like its in the bootloader? If so try to flash a new bootloader!
try this found in another thread
To get it out of AXP mode, the correct instructions:
1. Plug in the usb into computer
2. Hold Volume Down + Volume Up + Power simultaneously for like 15 seconds
3. The bootloader should show up.
4. If it doesn't, unplug the usb cable, and plug it back in and then repeat the these procedures
Wugs tool kit
First when you plug it in hold all three power buttons
Second
I also have used the tool kit it gets stuck all the time on the flashing system. I think its a time out error because of the complexity of extracting the image and flahing the image with out a retry or check command. Here is a fix that i have figured out. When in Wugs tool kit download the Os Version you want on your device locate the folder with the downloaded image and extract it using 7 zip. once extracted flash the remaing .img files seperatly under andvance setting menu select flash system then user data it should boot right up. if you forgot what version you flashed previously flash all img files boot bootloader system user etc. if you still have problems let me know. i can give you my email.
Click thanks if i helped
b3ltazar said:
Do you get a charging icon when you plug in the n7? did you try a diffrent cable?What exactly does ur computer do when you plug in the dead n7 (does it thy try to install a apx driver) Does toolkit see tablet like its in the bootloader? If so try to flash a new bootloader!
try this found in another thread
To get it out of AXP mode, the correct instructions:
1. Plug in the usb into computer
2. Hold Volume Down + Volume Up + Power simultaneously for like 15 seconds
3. The bootloader should show up.
4. If it doesn't, unplug the usb cable, and plug it back in and then repeat the these procedures
Click to expand...
Click to collapse
My tablet doesn't show the charging icon, I've tried with different cables, when I plug it to the laptop it makes a sound and shows an APX driver... I'm stressed and that instructions didn't work for me.
EverAngelOn said:
My tablet doesn't show the charging icon, I've tried with different cables, when I plug it to the laptop it makes a sound and shows an APX driver... I'm stressed and that instructions didn't work for me.
Click to expand...
Click to collapse
Unfortunately it sounds like you erased your bootloader and nvflash can do nothing for you unless you used the unbrickable mod before u f'ed up your tablet. Try sending it to asus for Warranty tell em you installed the ota update and it wouldn't boot up afterwards. I have read many threads about this issue with nobody being able to recover there tablet. Asus does have global warranty