ISP : 2.09
SPL : 2.15.0000
GSM :02.19.21
OS : 2.9.7.29
after upgrade ROM finish. Wifi not respond when i turn on nothing to happen. How to do?
qtek s200 not starting
after i upgraded to wm 6.1 i maked a soft reset and the phone dont shoes the os
when start and the screen goes blank please help me :'-(
qtek s200 not starting
\]after i upgraded to wm 6.1 i maked a soft reset and the phone dont shoes the os
when start and the screen goes blank please help me
Related
Hi...
I upgraded my qtek 9100 from OS version 1.6.7.1 to cingular 1.8.11.1
The problem is that now, the phone doesn't start... the splashscreen appeears, along with... IPL 2.17
SPL 2.21
GSM 02.07.10
OS 1.8.11.1
But doesn't get out from there...
Did a do anything wrong?
PLEASE help me?
Is there any solution or is it bye bye qtek?
maybe you flashed broken or wrong rom.
start your device in bootloader mode (look in wiki how to do this) and then reflash again and if this does not work, get rom from your provider and reflash with this.
...
But my pda starts and it stays in splashscreen... is it repareble anyway?
Yes it should be fixable
Cant understand why you would want a old cingular rom (the cingular is not exactly same hardware as your phone wiza200 vc wiza100!)
You should download an aku2 rom here ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
user name xda password xda
Next get into the bootloader screen - turn device off and start with camera button pressed - should be a multicolor screen
Next attach device to pc via usb cable
Flash with above rom and all should be well
Trying to change rom upgrading from German to italian language, my prophet doesn't restart !
Infact, it seem's locked on splash screen ( O2 image) and windows mobile doesn't start.
IPL is 2.15.0001
SPL is 2.15.0001
GSM 02.19.21
OS 1.0.13.21
I can do hard reset, but when I push camera+Comm+soft reset button and the PPC ask me if I won't to restore default setting, pressing the call button I see the format complete but the windows mobile doesn't start.
At least I notice that i can use bootloader mode (camera+spft reset) but i don't know if there is a way to put os on PPC.
Please help
Thank you
You can try to reflash via the bootloader, as described here: http://forum.xda-developers.com/viewtopic.php?p=285465#285465
I had some feedback from people, who restored the corrupted OS this way.
HELP ME!!!
I had, aku2.3 and I tied to update with this ROM,
I did everything like in guide:
1 hard reset
2 Active sync with out align screen
3 Run UPGRADE_ROM.bat and wait until finish sound
4 hard reset again
...and all i have is blue screen:
1 Pl 1.00
SPL 2.13.0000
GSM 02.30.21
OS 3.0.0.0
WM doesn't start. HELP ME I can not work appropriately without my PPC ...I will be grateful for your help
dooogie
Hi Folks
I've got a Qtek 9100 with IPL/SPL 2.21 /02.07.10 / 2.18.7.7 ROM
When I tried to install TT6 - Setup finished with Reboot. Now System
hangs /freezes at the Windows Mobile Start Logo..
Reset res. Hard-Reset won't work .,. system still hangs...
Any suggests to this prob?
Cheers
WTK
Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi
You must upgrade :
-Remove SD-Card
-Remove Sim-Card
-USPL
-Upgrade new ROM
thank. i got through to install wm 6.1.
can any one please tell me which is the most stable ROM for 6.1 or 6.5
which one is better for my HTC artemis.
please post link to the ROMs
I'm using two roms :
Shady313-23081R1 : http://forum.xda-developers.com/showthread.php?t=546805
dheewatara-s 23075B1 : http://www.pdamobiz.com/forum/forum_posts.asp?TID=255901&PN=1
same problem..pls help
i have same rom and ratio with u nomi...but my problem still occur...
where do u get the USPL eventually?