Database Users

Problem with XDA Exec Rom update, please help!

Hi,
Downloaded the XDA Exec Rom update on to my laptop and then went about the install and followed the instructions. The next thing I know an error message pos up and when I look at my PDA the screen has gone completely blank!
I have hard restarted the PDA and just can't now get it to work. All I can see on an unlit screen horizontally at the top is 'USB' and at the bottom 'v1.00'.
ActiveSync will not recognise the device so now completely nadgered! Has Windows Mobile been completely wiped off the PDA?
Please help if you can!

Exec problem
I'm no expert but I had a similiar problem and resolved it as follows.
Disconnect the USB cable from the PC. Reboot the PC. Reconnect the USB. Run the ROM upgrade again and all should be well. I hope..... :lol:

I had this happen late last year, hard reset the device (using the two minus keys on the top row of the keyboard, at the same time press and hold the stylus in the reset button), then connect and re-run the new ROM installer, it wil take quite some time, about 50 mins if memory is correct, but this did work - Mke

Thank you very much indeed, it has worked! Have a fantastic day :lol:

xda mini s help required quick please

hi
i recently jsut received new xda mini s from insurance company after i broke last one, i cant make a claim within 6 months so i need help, i was setting up software last nite after clickin corparate mode and after i installed pocket controller i run the software on xda and clicked video settins and trest and now the xda has crashed and wont load past the operator screen do you know how i can resolve this prob
phone has been on for 22 hours now, shall i jsut drain the battery down some how and install it all agaain, i ahve tried hard resetting it that dont work and have tried soft erst that dosent do anythin
please help thanks

chadders said:
hi
i recently jsut received new xda mini s from insurance company after i broke last one, i cant make a claim within 6 months so i need help, i was setting up software last nite after clickin corparate mode and after i installed pocket controller i run the software on xda and clicked video settins and trest and now the xda has crashed and wont load past the operator screen do you know how i can resolve this prob
phone has been on for 22 hours now, shall i jsut drain the battery down some how and install it all agaain, i ahve tried hard resetting it that dont work and have tried soft erst that dosent do anythin
please help thanks
Click to expand...
Click to collapse
What method of hard resetting did you try?
If hard reset does not work get to the bootloader screen (multicolored) by holding down camera button and preset reset button.
You can then reflash your rom - does not have to be activesynced to do this - as long as you have a small 'usb' on bottom left of bootloader screen when connected to pc it should work.
I guess this is the rom thats already on your device ftp://[email protected]/Wizard/Roms/o2/Xda_Minis_Upgrade_v2.21.4.101.exe

whats the boot loader screen, all the phone loads upto is the bit before windows mobile shows when you first turn it on
comes up with 02 logo, jsut tried tgettin bootloader up does fone have 2 b off or on

chadders said:
whats the boot loader screen, all the phone loads upto is the bit before windows mobile shows when you first turn it on
comes up with 02 logo, jsut tried tgettin bootloader up does fone have 2 b off or on
Click to expand...
Click to collapse
Turn phone off - then press camera button and hold - press power on button whilst still holding camera button. Bootloader screen should come up (multicolored)

right so far i can do all the stuff u said what do i do once i have got the usb bit in the bottom left hand corner

chadders said:
right so far i can do all the stuff u said what do i do once i have got the usb bit in the bottom left hand corner
Click to expand...
Click to collapse
Just download the rom mentioned above - connect device to computer (does not have to activesynced) and run the rom intaller and the rom will install.

how big is the file

chadders said:
how big is the file
Click to expand...
Click to collapse
50mb or so, shall take a while to download :wink:

and once that has finished do i just install it and that will flash the rom will it and the phone will work again yeah

chadders said:
and once that has finished do i just install it and that will flash the rom will it and the phone will work again yeah
Click to expand...
Click to collapse
I certainly hope so

how long does it take to do this and what info will i loose off phone

chadders said:
how long does it take to do this and what info will i loose off phone
Click to expand...
Click to collapse
The rom install usually takes 10 mins or so - dont worry it usually stalls a while around the 70-80% mark a while - just wait and be patient until its 100%. It will return to factory condition so all your data will be lost i am afraid. If you have synced with outlook before your pim info can be restored from there.

i was only jsut settin it back up anyway and it didnt work just now the update but it dont the error revoery adn its working again done 75 so far

Just tried to upgrade my XDA mini to this new ROM (v2.21.4.101). Everything seemed to be going swimmingly - I installed the ROM and the thing booted up ok. I then did a soft reset before all the o2 stuff installed. I then went to do a restore (having previously backed up using spb backup) and it almost completed but then the mini s rebooted itself again.
Ever since, it will only get as far as a page which has most of the bar at the top of the screen (the signal strength icon, battery strength and GPRS indicator are all there), but not the start button. Underneath that is just a blue screen with the Windows Mobile logo. The backlight will come on if I press any of the buttons but otherwise it is not responding.
I've tried holding down the camera button and pressing the on/off button and also camera button and the reset button, but neither of them seem to do anything.
I've tried reinstalling the rom from the PC but it says it can't find my device.
Rather bizarrely, if I call myself from another phone, the device rings and says incoming call, so the thing obviously isn't totally dead.
What can I do to sort this out?
Cheers!

s200 won't boot into windows anymore

hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!

thierry86 said:
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
Click to expand...
Click to collapse
Since no hard reset is available... try removing the battery for the whole night.
If you do manage to get to windows then watch out for the startup folder, you're probably overloading the memory at startup.(htc home and psxut eat a lot at startup and windows as well)

i have removed the battery, sim and sd, and just left it there the whole night, but it still won't go further than the windows boot screen...
any suggestions ?
is is possible to do a hard reset by connecting it to usb and enter the bootloader somehow ? if yes, how ?
thanks!

hi,
have you tryed entering bootloader by the normal process?
"Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camera + Soft Reset, then release soft reset and keep pressing camera button till appear the Boot Loader.)"
regards

yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...

thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
Okay then there is still hope.. When you have connected the device run an opdate tool like the NVID WM5 Rom.. that should work as a hard reset..

are there any working links available for this ? rapidshare seems to have disabled this...
thanks!

thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
As long as you are able to enter bootloader then you can flash it with any old prophet rom. I had the same issue after installing WM6 rom. I used a Spanish rom on wiki to bring it back and then installed WM6 VII touch. So far it has worked well for a week.

HTC 6tab Home screen killed my 818pro!!!!!!
Here is what happened a few days back. My 818pro (aka prophet) suddenly heat up while not in use 3 days ago. I thought it was caused by the hot weather in my country (I was driving with aircond in full blast). The heating up eventually go away. Then 2 day later, after I put down a call, my phone just frozen / hung. Hence, I do a soft reset & guess what It never recovered & stop at the black screen with the dopod logo while restarting. Some service centre I visited told me that the main memory chip need replacement & reflash!!! I can't even see the window screen. I have use the HTC 6tab for 2 months & I am very sure it's the culprit here. Hopefully you are not having the same problem like me
Try plug in the ac charger before u do soft reset. My phone need it in order to restart after soft reset (after I started using the HTC 6tab Home Screen).
That is before my phone die yesterday

Wizard is Frozen - It won't start. Someone help pls??

Hi, I would really appreciate anyones help with this. My brother went on holiday and left me his 02 XDA Mini S (I found out here its also called a Wizard?), and I had no problems using it for about 3 days - was just testing the various features.
I found my brothers contacts - and since its now a hand me down so I wanted to remove all these etc - I asked my brother what to do and he said do a Hard Reset. I found out in the Manual how to do it - I press the Communication Button and the voice command button and use the reset and nothing happened. I asked my brother and he said use the communication and voice button and then turn it on, that sometimes works - and it did. The screen showed:
Press Send to restore factory default...
I pressed the send button and it said it formatted. I was happy, it turned on, I did the set up - everything was working. Then at the end of the day I turned it off and in the morning I turned it on - all the screen shows now is the screen which first comes on - 02 with and underwater bubbles thing, and four lines -
IPL 2.21.0001
SPL 2.21.0001
GSM 02.07.10
OS 2.21.4.1
in red.
It won't go to the next screen - which I think says windows mobile. It just stays at the first screen when I turn it on - and has these four lines
Can anyone help me please? My brother will be back from holiday soon and he will be very upset with me if he finds I ruined his phone
please please please help me - i'm not as good with technology as you guys
Jocelyn

Try and get into bootloader mode by holding down the camera button and soft resetting your device. From bootloader mode you can flash back to the factory rom that was on the phone or wizard love.

Hi
I found how to go into Bootloader mode - my phone now shows three colours. But I'm not sure how to do the rest you mentioned. Could you explain how I should do it step by step please? Sorry!
Jocelyn

He means that you download the orginal rom from your provider and flash it back onto the phone.

Ok
I have made no progress
Here's what I did (please don't laugh - I'm new at all this)
1. I downloaded the active sync software from microsoft, and also downloaded a file i searched through on the forum mentioned by peter, called Wizard Love.
2. I pressed the camera button and soft rest the wizard to go into boot mode
3. I ran active sync - it said no connection.I connected the Wizard and searched - it said that no device was found (but the computer made a sound like it always makes when USB is plugged in). Also on the phone, it showed the word USB at the bottom left of the screen.
4. I extracted the wizard love and double clicked on the file newromupdateutility_wizard_noid.exe
5. When I got to the screen about existing software on the phone it was blank in that section, but it had the option to use the new one, so I proceeded.
6. The Wizard screen switched to a bar and completed 100% within about 5 minutes. Same thing on the computer screen.
7. It shows congratulations - etc.
8. I clossed everything and shut off the computer. Disconnected the wizard and there was a picture like some love cartoon characters - and thats all.it just stayed at that screen for a long time. Finally i thot maybe i should turn it off, but the power button does not work.
9. I used the stylus and did it a soft reset - the phone still froze at the start, with a wizard love cartoon - but the 4 lines i mentioned in my first post were different - it showed different numbers. But it still stuck there.
10. I thought maybe the wizard love is not compatible with my phone? So I went to the 02 XDA mini site, and downloaded the software from there - Xda_Minis_Upgrade_v2.21.4.101. I redid the whole thing, this time with this software.
11. At the end I saw Congratulations! again, but this time the screen had gone back to 02 - and the numbers went back to what was in my original posting. But still the phone does not start - its just stuck at that 02 screen with the 4 red lines.
12. Somone help me please!!! Have I made it worse???
Jocelyn

The Love ROM should work on your phone since it it does not have IPL/SPL (AFAIKnow). However, it seems that the phone itself already have a bit of problem itself. Using the "Xda_Minis_Upgrade_v2.21.4.101" to flash the phone in bootloader mode is the wise thing to do. Probably you'll need to hardreset it again (i.e. what you've done in the very first post).
As far as I can see, you've did nothing wrong on your first post. It seems to be the phone problem. ANYWAY, you may want to note the little issues. Example, do not have the miniSD card in the phone when doing all the stuff said above.. and possible, remove the SIM as well.
Also, sometimes, it takes ages for it to boot up. I'm not sure how long you've waited, but I would say.. give it a good 5 mins to do its bootup to confirm it hanged.

Sorry
I should have mentioned - in both cases when I ran the utility, once I waited at the splash screen for more than 10 minutes and nothing happened, i just tried to do a hard reset. In both cases the words came up, press send to do a reset etc...
but when I press the left (green phone) button (i think that is the send button?) it says format failed everytime.
I searched at some other thread and followed what Zabardast_1 says about flashing and I tried that, it does not work. Is there any other option? Oh i also tried it another time, this time disabling Anti Virus first - but still no luck
Jocelyn

Hmm.. I'm sorry to tell you. Since you have a 'Format fail', you 'officially' have a bricked device. That has something to do with the hardware.. or stuff that doesnt have any thing to do with your flashing.. probably CID unlocking may cause this problem.
ANYWAY, it seems that your only choice is to get it to somewhere to have it fixed. probably you want to make it as official (i.e. use the O2 ROM) before taking it to O2 to have it fixed.

Problem while booting my trinity phone

Hi,
I have got my trinity phone one year ago and never had a problem since last week. When starting my phone, it stops on the first screen (with "orange" logo) and nothing more happens.
I tried to reset it without succeed. The phone is not detected by the "activeSync" to make it flushable.
Help please !
Yves Florent CK

my problem is mor or less the same... only that dont apears any image on screen and the green led is constantly on...

I have loaded a long time ago an old version of ROM Gelly.
This ROM worked perfectly to a friend who suggested to do the same with my trinity.
The PROBLEM is that when i try to open the pda it freezes to the first srceen showing the rom version and after....nothing!
I tried to load again Gelly from the bootloader, it begins to run, it runs about 1% then the trinity makes a flash (this means it loses the connection with the pc) and then shows me again the first screen....
Please i need help!

me to. i try install the rom original and my pda is living again.
try this to

hi,
2 things ...
have you tried a hard reset ? (hold both softkeys & hit reset button)
and when flashing:
when you first run the rom upgrade from PC with phone on Activesync, it is quite common for phone to hang at the bootloader screen ...
worry not -
just re-run the upgrade from PC again immediately, without disconnecting or attempting to switch phone off.
(the word USB should be visable on device under the coloured bars)
if you do get hung up at bootloader screen a hard reset should at least get you back to where you were, and you can try re-flash again.
hope this helps,
regards,
Kevin

My trinity won't work anymore...
Hi all!
My trinity wont't work anymore. When i press the ON/OFF-button, the display is lighten up a bit, then the buttons are lighten up. And nothing more.
When i will go to bootloader mode, it is the same.
And when i will to a hard reset, the trinity ask me to press SEND or END key for restore factory default or cancel. When i choose the SEND key, on my display some ridicoulous letters appear, but nothing more.
When i try KITL mode, everything is the same.
Can someone help please?
Because i can't do something on my trinity
EDIT (maybe this can help my helper ):
After some time, the display and the buttons are not lighten up anymore.
When i try to charging the battery, it only works, when the buttons are not lighten up (when i switch on, charging is ok; when the display is lighten up a bit, charging is ok; when the buttons are lighten up, charging won't work; when the display and the buttons are not lighten up anymore after a time, charging is ok)

hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...

never mind... problem solved... tks anyhow

weezer_88 said:
never mind... problem solved... tks anyhow
Click to expand...
Click to collapse
ok solved...
Can you tell how you did it?
Thanks

weezer_88 said:
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
Click to expand...
Click to collapse
But my trinity don't go to the boot screen, nothing on the display but lighten up slightly...
Nevertheless, can you please post, how you solved your problem?
THANK YOU in advance!

I downloaded the original Rom windows mobile 5 from http://www.htc.com/www/SupportDownload.aspx?p_id=3&cat=2&dl_id=111 then entered in KITL mode, connected the usb and reinstalled the original Rom, and all was fine...