Not sure what happend, but when I plug in the headphones i can hear sound, when I take them off the phones sound isnt working :S
anyone got a clue?
Im on a Cingular8125 WM6
That's because there is a tiny switch at the bottom of the headphone jack that is known to get stuck sometimes. I've never had to do this little operation myself, but I've read many times about this same problem where it's been fixed using a toothpick or a straight pin by sticking it down the hole and moving it around a bit till it switches back. probably the easiest way to do it would be to play an mp3 or something when you do it so that you'll hear when it switches back.
I just wanted to add that in addition to trying xeno1's method you might also like to try plugging in and removing your headphones a few times. Some people have had a similar problem and solved it by doing this.
yea i eventually got it lol
Related
Hi,
My exec is stuck in headset mode, it appears to think the handsfree is still plugged in and will only use the headset mic and earpiece even if not plugged in. I've tried a soft reset to no avail and i really dont want to do a hard reset as i have no way of backing anything up at the moment.
Any suggestions?
thanks in advance
Brodie
This is a fault that goes all the way back to the original devices...
The way to fix it is to get your headset jack, and try various ways of quickly but forcefully unplugging it. Happened to me the other night and eventually I managed to force it to recognise the headset was removed and it came back out of the speaker.
Cheers
Ant
sorted now, not sure if it was unplugging or not but i made & recieved some calls and unplugged it and it works!
thanks for the speedy reply and solution.
cheers
Brodie
I also have this problem today....but I dropped my xda exec on the ground and then all the sound is gone.....only headset and bluetooth are worked....
I think I damage the phone somehow.......
But I will still use it...
Anton.Valleyman said:
This is a fault that goes all the way back to the original devices...
The way to fix it is to get your headset jack, and try various ways of quickly but forcefully unplugging it. Happened to me the other night and eventually I managed to force it to recognise the headset was removed and it came back out of the speaker.
Cheers
Ant
Click to expand...
Click to collapse
Thanx Anton. My XDA experienced the same problem and I was veeeeerrrrrry sad about it.
Then I came across your suggestion and, BINGO! It worked.
*Sorry for the duplicate post*
This just started happening on my JasJar today (system audio returned after poking the headset in/out a few times), after 11 months of use. Does this get worse over time? Should I bite the bullet and try to get Imate to repair it?
Please advise!
Damn it, I've got the same problem since yesterday
I can hear calls in handsfree mode (using the built-it handsfree mode) and with an earphone plugged in but not through the speaker besides the display.
Strangely, the internal mic works well (I mean, the called person can hear me). Is it the same problem you're talking about or has my speaker just collapsed? :?
.ox
EDIT: I've noticed that only the speaker above the display seems to be muted. The one on the backside of the display and the two speakers in the main body (when using handsfree mode) work. So I guess, the speaker's dead, isn't it?
2nd EDIT: After plugging a headphone in and out about 20 times and applying pressure on the display receiver it suddenly started to work again. I'm not sure what was causing this problem but even a hard reset didn't fix it so I guess it's a hardware (or firmware) related issue.
Same Problem
After working fine for months, with and without the earplug, my MDA Pro has started do the same thing--it's stuck in earplug mode. I've tried plugging/unplugging the earplug for about five times in a row--didn't help. Do I really have to do this 20 times? Jeez--I'm afraid of messing up something else. Could there be another solution? UPDATE: I just now tried plugging/unplugging 20 times--no help!
OK, the solution is the same as that for the loose USB port--send the MDA Pro to the fine folks at Pocket PC Techs and let them fix it. They replaced the earplug jack and got the unit to work perfectly with and without the earplugs. $75 plus shipping. They misplaced my stylus, but sent me a new one right away. I'm very happy with their service.
I've had this kind of problem with a Nokia 8310 which I've carried for three years. I believe it is a physical problem with the headphone socket which may be caused by lateral force on the jack while plugged in inside a pocket. Wiggling and unplugging the jack repeatedly makes the phone socket work properly. There is a small switch inside made out of a metal spring. All you need to do is wiggle it.
The phones which go silent after being dropped may be a different matter.
suddenly, the speakers of my wizard (Qteck 9100) doesn't work anymore.
When playing mp3's or making a phone call, I just can't here anything anymore! When using my headset, everything works fine.
Since there are 3 speakers, (2 stereo for music and 1 for phone speaker) which doesn't work anymore, I suppose this is a software error and not my hardware.
Is there anyone with some ideas for registry changes or so to make it work again? Else I will return it and let them fix it (still in garantee)
thanks!
CIAO!
VOODOOS!L
the main speaker on my 9100 just quit one day while it was sitting on my desk and hasn't worked since. Hard reset didn't help. New rom install didn't help. Gonna take it apart and look around soon.
guttrhead said:
the main speaker on my 9100 just quit one day while it was sitting on my desk and hasn't worked since. Hard reset didn't help. New rom install didn't help. Gonna take it apart and look around soon.
Click to expand...
Click to collapse
I've had this happen to me. What I surmised was that the phone probably thought the headset was still plugged in. I had to do a headset exchange with T-mobile USA.
There's a known fault in the wizard headphone jack socket switch which stays open when the head phone jack is removed. Plugging the jack in and giving it a good "waggle" sorts it apparently.
PS "waggle" is an old Swedish word for moving something back and forth while having your left trouser leg rolled up to your knee.
eek
this actually happened to me when my headphone jack's tip broke off and stayed in the connector. if you pop off the battery, you can see the tip. just make sure nothing's there, to verify that your problem isn't physical.
llcoolj said:
There's a known fault in the wizard headphone jack socket switch which stays open when the head phone jack is removed. Plugging the jack in and giving it a good "waggle" sorts it apparently.
PS "waggle" is an old Swedish word for moving something back and forth while having your left trouser leg rolled up to your knee.
Click to expand...
Click to collapse
I tried the "waggle" but it didn't work. I ended up replacing the headset since it was still under warranty with T-Mobile USA. However I use the headset plug quite a lot since I use the phone as an MP3 player during my work commute, so this is a cause for concern.
I had never used the headset and never put anything in that jack. Still the speake stopped working.
found out what was wrong with mine. Turns out that the ribbon cable that connects the lcd part to the keyboard part got snagged on something and had a couple of mm gash torn in the side. I noticed that sliding the keyboard open made kind of a crumply noise. I thought it was some flaw in the slide design, but it was just the broken cable rubbing against something. Still not sure where to get it fixed though (other than germany)
I had the same problem with this f*** headsets... I tried since two hours to "waggle" it and it didn't change anything... I'm going to try with other headsets tomorrow if it's the only solution
This happened to me again with my replacement MDA. This is what I ended up doing - take off the back plate and remove the battery. If you look at where the battery used to be towards the bottom of the phone, you'll sorta see the headphone connector. Use your stylus and wiggle it around thru the slight hole. That might do the trick.
Thanks,
I could solve my problem too this way, just kept moving in and out the headphone jack till it worked.
CIAO!
VOODOOS!L
One question, How many times you did it to make the sound work again ?
well, i think it took me some time, just wanted to give it up and suddenly it worked (play some music while trying, so you here it when it will work)
I also pushed and turned a little bit with the headphone jack into the headphone input connector, but be carefull with that, the headphone jack could break and parts of it could stay into the headphone input connector, and I assume that would make your problem bigger than before...
anyway, if it really doesn't work, you should return it asap, I should be replaced ...
good luck
This fixed my speakers
Incase someone wonders over to this thread:
I very gently wiggled the headphone jack whilst playing an mp3, and it worked.
I am so relieved that I dont have to take it in to be repaired.
If you cant get it to work straight away, try blowing into the socket, or use a toothpick. But remember to be gentle.
Hi
First post here so please excuse any ignorance.
O2 XDA Exec - standard Rom from O2 website.
Problem started a few hours ago after using the audio out for listening to music via mediaplayer.
My unit was working fine while playing, but later after it had been disconnceted from the stereo I noted that there were no tap sounds.
I first checked the audio settings, all normal the way I always have them.
Next I tried the reset button on the back of the unit, no help there.
I tried plugging in the headphones in and there is perfectly normal audio over the headphone but once removed nothing at all.
Getting more extreme I tried a rom update/fresh start, no luck there either.
Getting even more hardcore I downloaded the assembly/disassembly pdf from this forum to check if there was a physical fault with the 3.5mm audio port. I checked to make sure all the tabs were springing back after an audio jack was removed all seem fine (although at this point I lack a comparision).
Then for a test I rang my own phone from my land line and it seems to ring fine but there is nothing from the mic or either of the earpieces during a call.
I am fast running out of ideas and the last test really perplexed me.
I am almost certain that it is a case of one of the contacts inside the audio port not springing back and therefore cutting out the external audio, giving the device the impression that there is still a headset connected.
I don't want to poke around inside too much as I have so far been able to keep security tabs intact, just in case I need to send it off.
Anybody have any ideas on how to get around this? Is it possible that it is software and not hardware?
Please help as phone is a bit useless sans headset, which I don't really want to be permanetly tied to.
Thanks
Thom
keep plugging and unplugging the headset until it works or you get tired, if it works great, otherwise sent it in for repair.
Does nobody out there have a registry hack workaround for this problem?
When I receive calls its rings and any other sounds come through whilst the phone rings.
There must be a workaround here somewhere???
Had exactly the same problem. No sound but rings ok,
After the first time I plugged in the headphones, no sound. Its probably cause the headphone socket is so big in comparisson, that it gets dirty. Just spray some anti static cleaner on the headphone plug and keep plugging it in.
Worked perfectly for me!!
There is no registry hack because this is a hardware issue, not a software one.
The ringer will ring whether the earphones are plugged in or not, which is how you would expect a phone to function. The problem lies with the connectors in the headphone jack socket not recognising the headphones are unplugged. Resetting and even dare I say a hard reset will not sort it as the issue is not software related.
This has also been covered several times on the forum. The only way (short of taking the thing apart) is to keep plugging / unplugging the headphones until the sound reappears.
Cheers
Ant
This just started happening on my JasJar today (system audio returned after poking the headset in/out a few times), after 11 months of use. Does this get worse over time? Should I bite the bullet and try to get Imate to repair it?
Please advise!
Something happened to my wizard today, and I can't figure out what it may be. The gist of the problem is that I cannot use it as a phone though it's internal microphone and speaker. Everything works fine if I use my bluetooth headset or the external speaker in my car cradle, but the actual on-board phone speaker and microphone appears to not work. The phone hadn't been dropped but if someone calls me I cannot hear them and they cannot hear me unless I switch to bluetooth or plug it into the cradle with it's external speaker and microphone. I would write this off as hardware failure (and I still think that's what this is) but the other odd thing is that the phone will not let me switch to the speaker phone mode. If I press the 'speaker' button on the phone screen during conversation, it just doesn't do anything. Has anyone experienced something like this before? I'm hypothesizing that the problem may be with the headset jack which may be stuck in the open position, and thus the phone constantly thinks that's it's sitting in a cradle, but I don't know if there is anything I could do to fix that.
Your hypothesis was most likely the correct one. This happens to a lot of people. It's usually fixable by either plugging and unplugging a headphone set a bunch of times until the switch becomes unstuck or by taking a needle and inserting it in to the jack and move it around a bit until it becomes unstuck. playing an mp3 while you're doing this is an easy way to know when you get it unstuck.
Thanks for your reply. I've been trying to do that, but nothing seems to be helping. :-( I've already got a new phone on order from T-Mobile, but I still hope to fix this thing. It's a shame, I like the wizard.
So, I'm running into an extremely annoying problem with my G2. Just the slightest touch causes my headphone jack to stop sensing properly.
Example: I'll be listening to Google Music and i'll just ever so slightly move my headphone cable near the base of the 3.5mm headphone plug and suddenly the audio will stop as if I have unplugged my headphones. Yet, my headphones are still snapped in and once I press play again, the music continues on as if nothing has happened.
Some times my phone will go from headphones and speaker...headphones and speaker, headphones and speaker. It's as if it doesn't know my headphones are plugged in.
We are talking super light touching here. Any rotation of the plug while connected will cause it to fail. Simply picking up the phone will cause audio to suddenly stop. I'd be willing to bet that by simply blowing on the damn plug would cause it to fail. Hell, even a fart in the plugs direction would probably cause it to fail. That's how light of a touch I'm talking about here. Also, tapping and rotating the headphone plug while it's plugged in would cause Google Voice search to launch. Super weird.
I don't get whats going on. I see know damage in the headphone input...everything looks fine. I've babied this thing since it has arrived. It has been in a case ever since.
My headphones are good because I've tried them on multiple sources. Plugging in different headphones in to my G2 causes the same problems still. I've tried switching ROMs but the same thing still happens.
I'm at a loss here. I need some advice on what to do. Should I just call Verizon and get a replacement phone? Do I need to unroot to do that?
What a pain in the ass.
Sushiglobster said:
So, I'm running into an extremely annoying problem with my G2. Just the slightest touch causes my headphone jack to stop sensing properly.
Example: I'll be listening to Google Music and i'll just ever so slightly move my headphone cable near the base of the 3.5mm headphone plug and suddenly the audio will stop as if I have unplugged my headphones. Yet, my headphones are still snapped in and once I press play again, the music continues on as if nothing has happened.
Some times my phone will go from headphones and speaker...headphones and speaker, headphones and speaker. It's as if it doesn't know my headphones are plugged in.
We are talking super light touching here. Any rotation of the plug while connected will cause it to fail. Simply picking up the phone will cause audio to suddenly stop. I'd be willing to bet that by simply blowing on the damn plug would cause it to fail. Hell, even a fart in the plugs direction would probably cause it to fail. That's how light of a touch I'm talking about here. Also, tapping and rotating the headphone plug while it's plugged in would cause Google Voice search to launch. Super weird.
I don't get whats going on. I see know damage in the headphone input...everything looks fine. I've babied this thing since it has arrived. It has been in a case ever since.
My headphones are good because I've tried them on multiple sources. Plugging in different headphones in to my G2 causes the same problems still. I've tried switching ROMs but the same thing still happens.
I'm at a loss here. I need some advice on what to do. Should I just call Verizon and get a replacement phone? Do I need to unroot to do that?
What a pain in the ass.
Click to expand...
Click to collapse
I think I might be having a similar problem as yours but with a different device (Square card reader). When I plugged it in the first few times there was a good sturdy click and it felt like it was being held in the jack well. But now it pulls out of the jack too easily, and a light touch causes the reader to disconnect. It seems like the contacts for the headphone jack may have been pressed in or something because it only maintains good contact if i hold a little pressure on the reader.
Either way, I don't like my options since I can either go on with a dysfunctional headphone jack, which might be ok since I use bluetooth more often than the jack, or I can try to get a replacement from LG which will likely be a refurb. I'm rooted too and assume I'd have to unroot in that situation. What to do...
Ever figure out your issue, OP? I'm having the same issue right now.
WCM3 said:
Ever figure out your issue, OP? I'm having the same issue right now.
Click to expand...
Click to collapse
I think I pushed the plug in too hard on mine and caused the jack to loosen. Amazon replaced the phone for me no questions asked. They continue to amaze me.