Hi
Yesterday my camera function doesnt work anymore. when I push the camera butten a message appears with "Camera is geen geldige Pocket PC-toepassing" ( transelated: Camera isn't a valid Pocket PC-application.)
It just doenst work :S
I also triend to run the camera.exe from /windows but then I get thesame error.
Some days a go I jused pagepool 6mb? Could that be the problem??
I hope someone can help me with this.
What kind of phone do you have? maybe get someone with the same phone to send you their camera.exe?
what about trying to hard reset your phone? or install the RUU depending on what Rom you're running.
I have the HTC p4350
and i'm using the official dutch wm6 rom.
with batterystatus (overclock van 247mhz)
and a 6mb pagepool.
I hope someone can help me.
Nobody an idea???
Try Hard Reseting your phone... or try to find and run the RUU for your phone ... maybe your carrier has it available for download?
Related
Very strange thing happened to my QTEK 2020:
I had installed the Widcomm Bluetooth Stack the 'Bluetooth.cab' floating around and I was not pleased with it nor did I truly need it and tried uninstalling and NO GOOD. Hard Reset and I in turn started from scratch with reinstalls. Here is my problem:
Upon the Hard reset there is no longer a camera.exe nor album.exe in the \windows directory - and the button of course is not assigned to the Camera because it IS NOT THERE!
This is a HARD reset peeps! It is inherent in the ROM 1.60.00WWE, no? How is this possible? Did this villainous bluetooth.cab do this? I have tried again hard resetting to see if there was anything and EVERY time there is no Camera nor Album installed!
I have installed the Camera/Album 2.5 which came from HTC inherent in the 1.72 ROM and it works great until I soft reset and then it locks the device so there is not a solution there.
Very strange indeed, any comments or remedies?
- Thanks
i've had the same problem with at times a hardreset would not load my extented rom programs another hardreset or opening the extented rom manualy and running the cab files solves it
Looks like part of the extROM was not installed.
Check the config.txt if its still complete. If not: repair it.
Check is the cabs are still in the extrom. If not: didnt you forgot to lock the extrom when you hard-reset the device? You have to get new cabs then.
I think the old versions are lying around somewhere.
OR: Upgrade to 1.72.00! Good occasion now.
Thanks
Thanks for the help... I didnt even know all of the possibilities of unlocking the ROM and seeing what is in there!!! This little machine is COOL!!
I suppose backing up the External ROM is 100% important now that I know it is there!!!
Thanks again for all of the help.
I installed the ExtROM unlocker and re-installed the camera 1.5 cab that was there, rebooted and tried out the camera and it is giving me the same problems as the 2.5 version of the camera did... I will leave it alone for the time being, I didnt really use the camera that much any way
- Cheers
tried out the camera and it is giving me the same problems as the 2.5 version of the camera did
Click to expand...
Click to collapse
what problem ?
I dont know what happened, but I replaced the older version of the Camera CAB with the 2.5 and changed the config file and then locked the ExtRom then hard reset and the camera works fine as it should...
Before ithe device was locking up - just a black screen when the camera was called... not any more.
Again, thanks for all of the help! This forum is amazing!
- Cheers
Hi Guys! I have problem with my O2xdaIIi! I can't use bluetooth on my device! When I use bluetooth It started a few seconds and I see: " Sorry! Bluetooth can no longer be used because the license is expried"
I have to hardreset, ReUprom but it do not work! HELP ME! Pls
That sure is somewhat unusual. Did you make any recent changes to your PPC such as new software or ROM upgrades?
Oh! I try to resize storage to 61.20 Mb! But I had to Upgrage to new rom o2 1.11.0 WWE! Uhm!! Now i still see error "Sorry! Bluetooth can no longer be used because the license is expired." when I turn on BT!
Any tell me the way to fix this problem???? Pls
Oh! I try to resize storage to 61.20 Mb! But I had to Upgrage to new rom o2 1.11.0 WWE! Uhm!! Now i still see error "Sorry! Bluetooth can no longer be used because the license is expired." when I turn on BT!
Any tell me the way to fix this problem???? Pls
ngoctuan said:
Oh! I try to resize storage to 61.20 Mb! But I had to Upgrage to new rom o2 1.11.0 WWE! Uhm!! Now i still see error "Sorry! Bluetooth can no longer be used because the license is expired." when I turn on BT!
Any tell me the way to fix this problem???? Pls
Click to expand...
Click to collapse
Ha yes this is most likely to be if u installed software to do with umm hacking or mobiluck sumtimes does it i had this problem but toke off the software and software u put on ur phone to do with bluetooth uninstall it untill it works again thanks
Hey guys..
I can't seem to get my camera to work again...
Can this be related to the speed up your wizard cab?
As soon as I press the camera button, or select it in the menu my device locks up..
ANy idea how I can resolve this issue? :?:
HELP!!!!!
having no problems with camera or video myself, what rom are you running?
5.1.70(Build 14406.1.1.1)
Rom 1.3.1.13 NLD
Radio 01.04.10
Protocol 4.0.13.17
That enough?
maybe if someone could post all the camera* files that are in the windows folder..
I think somehow my camera.exe and dll files got corrupted...
Or is there a cab witch re-installs these standard aps...
Anyone?
In my windows folder:
camera
camera.exe.0409
camera (different icon)
CameraPictureDLL
Camera-Settings
CameraVideoDLL
CameraWizard_(ht)
Hope this helps,
John
yeah...
I got those too..
But I think I might corrupted one of them
Can someone upload these files maybe so i can replace them???
I really don't want to hard reset.....
Here are the files.
I got my htc cruise about ten days ago. Camera was working fine.
But four days ago, i got the message the camera could not be initialized. I read on this forum that it sometimes helped to remove the battery for about 15 minutes. So that's what i did. And guess what, it worked for about 1 day
Then i kept getting the message the camera couldn't be initialized. Removing the battery didn't help anymore.
Then i hoped a hard-reset would do the thrick. Windows reinstalled and everything went fine. But now the camera icon is missing from "Programs". I tried to start it by going to the photo album and pressing the camera icon. Nothing happened. Then i use file explorer to go to the exe file. I found the camera.exe file, i tapped it but nothing happens.
Anybody have a solution?
Return it asap and get a new one
Camera issue
Hello,
I got this problem 5 days ago too... Very strange! Tried most of the procedures said here in the forum and none worked. The weirdest thing is that the camera just stopped working from one day to another, i clearly remember of not installing anything during those days.
I am very pissed about this issue! My problem is bigger: I bought it at UK while travelling and currently I live in Brazil (no support center around here).
Do you guys really think that its a hardware problem? How can that be if some other people already said here in the forum that a few days or weeks later, the camera went back on?
Anyone else can help us with this issue?
Regards
Try that one, worked everytime the issue happened for me:
http://forum.xda-developers.com/showthread.php?t=391455
Thats quite strange! My Storage Card is 40% free...
My problem is bigger now... After 2 weeks of "could not initialize" issue, my camera simply doesnt start anymore... I tried to lauch the application directly from the camera.exe but it doesn´t work either...
Don´t know what else to do...
radio rom upgrade?
did you upgrade your radio rom to 1.64.08.21 ?
if your answer is "yes" you should downgrade to Murata radio rom (1.58.21.23) ..
don't forget to backup your data, because Murata Radio does hardreset after downgrade..
No. I use the original Radio ROM (1.58.21.23).
I dont wanna try to change the ROM yet in case I need to send it to service.
I tried to install the Nadavi New HTC Camera and didn´t help in any way. But I noticed that, after uninstalling this patch, the camera exe files went back to the old versions. I tried to uninstall them (the original ones) or delete them in the File Explorer, even in safe mode, and windows mobile wouldnt let me.
Kenhas, looks like Im in the same point as you (exe is not working either). Did you happen to make yours work?
Any other soul could help us in here? (btw thanks for the help given by everybody!)
grgomes said:
No. I use the original Radio ROM (1.58.21.23).
I dont wanna try to change the ROM yet in case I need to send it to service.
I tried to install the Nadavi New HTC Camera and didn´t help in any way. But I noticed that, after uninstalling this patch, the camera exe files went back to the old versions. I tried to uninstall them (the original ones) or delete them in the File Explorer, even in safe mode, and windows mobile wouldnt let me.
Kenhas, looks like Im in the same point as you (exe is not working either). Did you happen to make yours work?
Any other soul could help us in here? (btw thanks for the help given by everybody!)
Click to expand...
Click to collapse
have you tried to delete the /DCIM directory from your storage card and soft reset ?
if your exe is broken you probably need to hard reset.
I formatted my storage card (8 gb) and soft reset... no deal
My exe is broken now. Do you really think the hard reset now is going to fix it? Before I had the "unable to initialize device", now I don´t have anything
I installed both Microsoft Portrait and Coolcamera to try the camera, they get quite the same error.. something like "failed to get camera"...
grgomes said:
I formatted my storage card (8 gb) and soft reset... no deal
My exe is broken now. Do you really think the hard reset now is going to fix it? Before I had the "unable to initialize device", now I don´t have anything
I installed both Microsoft Portrait and Coolcamera to try the camera, they get quite the same error.. something like "failed to get camera"...
Click to expand...
Click to collapse
I don't know if those tools share the same camera dlls, but if that is the case, a hard reset might fix things, otherwise, it means it is a hardware failure, and you will need to send your phone back to service.
FYI, when I faced camera issues, I installed the NADAVI WITH FIX cab for Kaiser , and that version only made the camera tool work again (although for me the rear camera was not working due to the storage card issue)
Maybe try installing that one first before hard resetting
http://rapidshare.com/files/97924716/Nadavi_HTC_Camera_5_0_4_2915_00_NEW_HTC_FIX.cab
Hi everybody.!
Im newie in xda technologies, and I have an S200 Qtek.
Im try to upgrade to WM6 and, if it possible, install TouchFlo.
Thanks in advance
Do you mean the "Cube" or finger scrolling?
Finger Scrolling is in almost every new ROM that's out, the Cube is only in "TE" (Touch Edition) ROMs. Have a look around the Prophet Mobile 6 Forum for ROMs.
and please read the guides on ROM flashing before doing anything...
MMMMM the cube, or finger scrolling, is not the same..?
I find this video in youtube...
http://www.youtube.com/watch?v=DWaGDTvwmmc&NR=1
I have the some phone.
Well... I reed tonight, becarefoul everythig and then may be try it...
Thank you very much for the fast answer
Regards.
The finger scrolling is like the iPhone, the Cube is the frontend including the Quick Dial application.
Chriscitalia said:
Hi everybody.!
Im newie in xda technologies, and I have an S200 Qtek.
Im try to upgrade to WM6 and, if it possible, install TouchFlo.
Thanks in advance
Click to expand...
Click to collapse
its realy quite easy...
*** for the follwing make sure the prophet is connected to pc via usb***
1...extract the jumpspl to men card
2...execute jumpspl --- (the screen gos white)
3...extract and execute wm 6.1 touch evalution installer (romupgateutility_nv_g4 or g3)rom in the wiki section\scroll down to prophet and then look for rom upgrading.
4...g4 and g3 are diffrent versions of prophets do to the chip intalled inside... (in boot screen 0001 »g4 001»g3)
5...extract FTouchflocubeESv2.cab to mem card
6...install FTouchflocubeESv2.cab
7...wala you have a qtek s200 with the latest wm6 and fully touchflo capabel ,cube and scrolling. ENJOY.........
4...g4 and g3 are diffrent versions of prophets do to the chip intalled inside... (in boot screen 0001 »g4 001»g3)
Click to expand...
Click to collapse
If it ends in a "1" it's a G4...
If IPL/SPL are something like 2.10.0001, then the device is G4, if it's 2.10, the device is a G3.
hello, i download the files, but it dosen´t work, have an error that can not open the TouchSettings because i need a trust certify,or cannot find one of the components, if the problem continues i have to reinstall or restore this file. I have done it severel times but the seme error, what can it be worng??
by the way my spl = 2.g4.4PDA, would tha be the problem?
Regardas from El Salvador, Central America.
conde20 said:
hello, i download the files, but it dosen´t work, have an error that can not open the TouchSettings because i need a trust certify,or cannot find one of the components, if the problem continues i have to reinstall or restore this file. I have done it severel times but the seme error, what can it be worng??
by the way my spl = 2.g4.4PDA, would tha be the problem?
Regardas from El Salvador, Central America.
Click to expand...
Click to collapse
I'm having same problem.
But i didnt installed wm6. only installed the touchflo application
Hi All
did anyone get this to work? as this is all new to me i do not want to try and ugrade as if it fails, i do not have the know how to get myself back to where i started off.
Thanks Chris
I tried but seams to always get stuck in the colored screen in the start up... if I do the things to fix this (found in the wiki, will it still work?) because my didn't the dosen't work properly btw the screen didn't get with for me when installing jumpSPL... any ideas what went wrong?