Database Users

How to update ROM on O2 Orbit-solution

All,
I've exchanged many emails with the imei.check.co.uk team and also met personally one of these guys in order to be able to upload a new ROM to my O2 Orbit. I had excatly the same problem as many of you with ending the uploding process with "model invalid id" error message.
Now I'm happy to say we do have a solution.
So if you want to change your ROM (any), simply follow these instructions:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Of course you can publish the instructions...
BUT PLEASE put a BIG WARNING! It will crash the phone in case you don't have a valid key file to perfom the last step: RUN THE UNLOCKER AGAIN AFTER THE ROM MODEL SWITCH TO RECOVER FROM THE DATA CRASHED MESSAGE!
Hello,
we found a way to flash ANY artemis roms in ANY Artemis look alike device (HTC Hero too).
Tools you need:
-hexworkshop from http://www.bpsoft.com/downloads/
-Any rom
-winzip or winrar
-http://www.imei-check.co.uk/C3v1Unlock.zip
a valid UNL file for your phone.
install hexworkshop and winzip/winrar
Take any rom for example: ART_HTCWWE_11240501_026790_WWE_Ship.exe
in explorer, right click on it and select "Extract files..."
Now it will unpack all the files
You'll have now "HTCWWE_shipsigned.nbh"
right click on it and Click "Hex Edit with Hex Workshop"
You'll see on the 5th row ARTE10000
Make it ARTE***** and save file
Now right click on ROMUpdateUtility.exe and "Hex Edit with Hex Workshop"
Search for word password.it will find it at 0x3E0B0 after password replace "BsaD5SeoA" with "IMEICHECK" and save the .exe file
Now connect the phone to the pc (normal way). run the C3v1Unlock.exe
when is asking for UNL file, disconect the phone from pc, press cancel, and
close the unlocker.
Now connect the phone back to the pc (in this mode it is) and run the
ROMUpdateUtility.exe
Now follow the instructions as the upgrade it will work.
After upgrade done, run the unlocker again and this time select the correct UNLfile.
Task Done.
C3 after flashing with any WIFI roms it will STILL not have WIFI!!!
Regards,
IMEI-CHECK Team
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Cheers, Martin

YESS, I have changed my GER rom to new HTC official ENG Rom, you are the best!!!!!! It's very simple to do...
yuppyyyyyyyyyyyyyyyyyy
the next step is.... backup the ROM I'm search ITA ROM form my HTC 3300.
see you later...

Good Discovery,
But the key is: We will have to pay 38USD for the "Proper UNL file" which is unique for every IMEI. Is it right?
Yeah, Thanks mr. Martin who is from Imei-Check Team. But we are still looking for a free solution.
Regards!

Tamagochi,
yes, first you have to go to imei.check and pay for the unlocking program and the unique .unl file.
P.S. I'm not a member of imei.check, just had the same problem as many Orbit users here...you can find my previous thread.

Works great on all versions.
Great support from the boys from emeicheck

Question about directions
Okay, I'm gonna try this. Do I still follow these directions exactly even though I have already unlocked the CID?
Also, when you see the line "ARTE1000" do you actually replace the "1000" part with the little stars? Sorry, I'm really new at this!
Thanks!

Yes you must do it all.

HELP
Everything went smoothly but when the device rebooted, it want me to "align the screen". It doesn't seem to be able to detect the stylus touching the screen! Can't get past that screen! Anybody know what I could have done wrong?

REF: HELP (Never Mind...)
I DID IT, I DID IT, I DID IT!!!! Just had to wait a minute or two and then everything seemed to work fine!!! TomTom is there, my WiFi is working! Thank you MAROSV and FRANCOBANCO!!!! If I can do it, ANYBODY can!! THANK YOU!!!

Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.

towelie said:
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
Click to expand...
Click to collapse
hi, I've just used the last HTC offical Rom (see xda ftp site..) that include TomTOm + 1 city map
byebye

Hi, I used the ROM on the Wiki page Dopod|English|DOPOD001|ARTE1****|1.25.707.2 ??/??/0?|1.25.707.104|1.25.0000|02.69.90|4.1.13.30| [Download|ftp://xda:[email protected]/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe]|[Thread|http://forum.xda-developers.com/showthread.php?t=286639]
It worked like a charm. The only problem I had was that when the Orbit re-booted after the process finished, it didn't seem to detect the sylus. I just waited five minutes and then it worked. Guess it was still getting settled in with it's new ROM. I don't know where I had the TomTom before I started the update, but it installed the German maps which were there before but as a bonus it gave me a English speaking voice which I didn't have before. It came with a German voice and I couldn't change because I had not yet upgraded the memory and had no room. So, my update was super! The only little thing is that once I changed the screen color back to blue instead of that terrible green, I couldn't get the phone part (dialing pad) to change to blue. No biggie, as now I can use my Orbit in English. I can live with the green phone pad! Maybe somebody will tweak that one. Hope this wasn't more info than you needed....

KleinMouse,
the dialing pad can be easily changed as well....just do a little seach on this Artemis forum and you will find many links pointing to skins available for WM5 phone edition.

O2 Orbit ROM upgrade info
Hi,
my o2 orbit has ROM 1.25.206.2 WWE. I wanted to know if this is the latest ROM available for my phone. I got my phone 10 days ago and i gotta do a soft reset on it every day. I had the same kind of problems with o2 Atom. But most of the issues were corrected once the ROM was upgraded. Please someone update me on my situation. Thanks

I tried the steps but i'm always getting the ERROR[300] : INVALID UPDATE TOOL - This Update Utility cannot be used for your PDA Phone. Please get newer Update Utility
Anyone who can help me here? I already tried different ROMs but always the same message

Did you unlock with imei-check? What is your model ID ARTExxxx ?

Yes i did. My Model ID is ARTE100

Hmm, but the steps described above are necessary to follow only if your model is Orbit (ARTE200). If you have HTC P3300 or Dopod p800W or Artemis or MDA compact 3, then you don't need to do it this way. The only thing you need to do is to unlock with Imei-check. If it still doesnt work, contact their help desk.

Ok i see, very strange indeed. I did the unlock with the stuff from Imei-check but i still get the message ERROR [244] : INVALID MODEL ID . If i try the steps from your post #1 , i get the described error obove. I'll try to contact the guys from imei-check, i hope they can help me

Hi Kleine Maus, I read with great joy that you succeeded and I would like to feel the same way.... Could you kindly reply to me and give me some detailed instructions to follow? Hopefully this will work for my HTC P3300....Thanks in advance.... I really appreciate it. Best SiperX

WM6 (Crossbow) for Typhoon + Flashing Guide! [Ready for download]

All you need:
http://www.geocities.com/gggbitonti

SORRY! fixing the link.. the site will be on line back WORKING! in 10 minutes!
thank you for segnalation
regards!

i followed the guide.
but when i turned the phone on for first time to load.
its loads slow and stays freezed...then i get an error
"Unknown SIM status.(Error 262144)
i think my radio rom maybe wrong.
if u know where to get a bin file..which i can upload via mtty1.42.exe
because i think my radio rom is old and i update to wm6 with old radio rom.
also it was a locked branded orange phone.
however before i proceeded with your tutorial i done the neseccary procedure such as regedit,,,super cid change and unlock sim
using spv services tools etc
so if you could help please i would much appreciate it..
because atm the phone is in operable and i would like to at least flash back to another rom or whateva....but it looks like i will have to do it through UI and mytt142.exe as these are the only things i can access via phone and pc.
thanks

...works fine with my sda music...only this horrible joysticbug

sandman: the .bin file for mTTY is on the last download link in the archive with WM6, here you can find mtty 1.42 to load the rom.. but to load the rom you need my SPL i share.. i don't know why it say you this sim problem rom.. the only tip i could give you is try to restart the procedure! my starting test was on a Typhoon WM5 updated.. but with the initial procedure you erase any old SPL... so, retry procedure step by step it work, i tested it 3 times before share and there are people who had success good luck!

...is there a way to solve this joystick-bug?

giuseppebitonti said:
All you need:
http://www.geocities.com/gggbitonti
Click to expand...
Click to collapse
could my make this work for htc monet

It work good at 565 but has some problems at 575 585,because the joystick and drivers are different.

weikey said:
It work good at 565 but has some problems at 575 585,because the joystick and drivers are different.
Click to expand...
Click to collapse
yessss t-mobile SDA (imate sp3i) rom update bad error joystic
keyboard dll problems wm6 rom not using

giuseppebitonti said:
All you need:
http://www.geocities.com/gggbitonti
Click to expand...
Click to collapse
Thank you so much I followed your instructions ang got a wm 6.0 typhoon ..its so cool dude...thxxx
but could be better I think if someone who know how to improve this wm 6.0 stuff...thxx

is there a way to application unlock in wm6
other than that it seems to work fine

works on imate sp3 now..

double blah

giuseppebitonti said:
All you need:
http://www.geocities.com/gggbitonti
Click to expand...
Click to collapse
Hi, thanks for the guide.
I am following the below steps in order to upgrade my untouched SPV C500.
Go to the folder where you extracted files from TyphoonNBFTools_0.3_SPL1010064_SPVServices.zip and run TyphoonNBFTools.exe
In menu select File > Open NBF... and load SPL1010064.nbf.
Right click on SPL1010064.nbf and select 'Emergency Flash' in popup menu.
Click to expand...
Click to collapse
Now, after loading SPL1010064.nbf, I am unable to proceed further. The reason is there is no SPL1010064.nbf visible there, so that I can right-click it... Could you please advise?

Never mind about previous post, I now got it to work. Looks fantastic so far, thanks a lot!
My mistake was I hadn't application unlocked the phone before.
This phone had been in a drawer for 2 years, and I believe it will again be in my hands, at least on week-ends.

Mega GREAT WORK !!!
It runs smooth on my dutch SPV C500
Who would have thought that WM6 on C500..
grtz!

didnt work for me. failed at first step with reliability test failed. Perhaps its cause i'm using vista.

I Have Application And Sim Unlocked My Phone But I Do Not Know If I Have To Do Something With The Cid Tool

FLORINOX, you have to SuperCID your phone

Hi to all...
I have flashed wm6 to my SPV C500 but my miniSD card is not working now...
???
EDIT:
I try other one and everything is ok....

T-Mobile Wing Flashing

Hello everyone. I'm new to the website and I'm very interested in flashing my T-Mobile Wing. I just have a quick question for you guys. Is there anyway to go back to factory default, pretty much put in back to its original out of the box state if i flash the phone? Also, will i still be able to use the My Faves or does that have nothing to do with this? Thanks for all the help and i look forward to learning more about this.
Gigabit

Yes. You can download a T-Mobile Wing OEM RUU (search the forums for it) to get back to normal.
My Faves doesn't need the MyFaves app. I used MyFaves for about a year on my non-MyFaves Moto PEBL before getting the Wing. I just use Touch-IT 4.4 with the HTCHome plugin and just assign my myfaves numbers to the first 5 slots so 'simulate' the ease. I've always thought the MyFaves app was rather buggy, but there's a CAB floating around that you can install if you still want it. I just change my contacts via mytmobile online.
It's not too hard as long as you follow all the directions. Read them twice through if you have to.

thanks for the quick response. I just have one other question at this point. i've been look all over the place and cant seem to find what the newest version of Touch-It is. Can you please post a link to the newest version when every you have some time. I can't wait to get started.
Thanks!
Gig

These are the newest versions of Touch-IT.
NEW - Touch-IT v6.1.3 - Clean (updated with UC)
Touch-IT wm6.1 19199.1.0.0 - Full
Touch-IT wm6.1 19199.1.0.0 - ITsBlack
Touch-IT v4.4 and 4.41 WWE P4350
There was a small problem with the wm6.1 versions where the MMS wasn't working correctly, and I'm not sure if that has been fixed... but ITJE's roms are awesome and you can't go wrong with them.
You'll need to install my keyboard fix
KEYBOARD FIX for WING / HERALD & ROM hardware keyboard (keybddr.dll) mismatch

First off, Thank you so much for the fast responsces. Second, after a nice LONG day at the hospital with my daughter i sat down to start the flashing process. As i started reading some of the directions i saw something mentioned about Hard-SPL. My question to you guys is this: once i download the Touch version that i want, is that all i need? or do i need to look more into this and find Hard-SPL. please let me know whenever you have some time.
Thank You,
Gig

All you need to do is follow this link
http://forum.xda-developers.com/showthread.php?t=358225
HARDSPL is basically just flashing a rom.. so once youre done with it, all you have to do is install the Rom you want.

ok so, when i run Hard-SPL it starts to do its thing but stops at 4% and comes up with Update Error "Error 270". I've tried re-downloading the Hard-SPL file and uninstalled/reinstalled ActiveSync. I also installed all the .cab files in this order: canonyang, disablesecurity, asergpolicy, followed by a softrest. any ideas what the problem might be. Please let me know when you have some time. Thanks for all the help guys.
Gig

Try restoring back to the default ROM that comes from the factory by downloading it from the first post here:
http://forum.xda-developers.com/showthread.php?t=321717
After that then try flashing with hard-spl and then to the new TouchIt.
By the way I recommend
Touch-IT wm6.1 19199.1.0.0 - Full
I have a T-mobile wing and that one works best for me. (of course you will have to run the keyboard fix cab and x-box cab as indicated in the previous posts after installing Touch-IT wm6)

i have yet to flash any ROM to the wing. it is still factory default. Should i still try to reinstall the new ROM using the link you provided? Thanks for all your help.
edit: after backing up all my crap i reinstalled the ROM using the RUU from the above post and everything went OK but I'm still getting the same Error when i try to run the Hard-SPL while in the bootloader screen i get "Error 270" at about the 2% mark. if i try to run the Hard-SPL while not in the bootloader screen i get "Error 202". please let me know if you have any other advice to get past this small issue.
Thanks,
Gig

gigabit3 said:
i have yet to flash any ROM to the wing. it is still factory default. Should i still try to reinstall the new ROM using the link you provided? Thanks for all your help.
edit: after backing up all my crap i reinstalled the ROM using the RUU from the above post and everything went OK but I'm still getting the same Error when i try to run the Hard-SPL while in the bootloader screen i get "Error 270" at about the 2% mark. if i try to run the Hard-SPL while not in the bootloader screen i get "Error 202". please let me know if you have any other advice to get past this small issue.
Thanks,
Gig
Click to expand...
Click to collapse
Are you sure you ran the 3 cab files first (inside of the Wing with your stylus) and then did the softreset on your Wing (by pressing the little button on the side of your wing with the tip of your stylus) prior to running the ROM exe file (on your large desktop PC)?
The 3 cabs should be run in the order that is given.

yes, after i installed the 3 .cab files i did a soft reset. I held the camera button and pushed in the reset button with the stylus. then once i was in the screen with the different colors i ran Hard-SPL from my desktop computer.
edit:
after reading what i was typing i tried it again and it worked. just call me stupid. SOFT REST! those two words will hunt me forever. Thanks for all your help. not its time to start blowing crap up. lol
Thanks a bunch
Gig

If I remember the instructions, you're supposed to run the hardspl when the phone is running WM.... so basically, install the 3 cabs, reset, wait for it to reach your today screen... connect to activesync, then run hardspl.

that is correct sir. Thats how i was reading it but then doing it a different way. i dunno what i was thinking. Thank you so much for all your help. i have successfully installed Hard-SPL and Touch 4.4 full. I also over clocked from 201 to 247 with no issues. Applied your keyboard fix and the mms fix along with the Internet fix. all is working perfect. thanks again for all the help. i'll definitely will be browsing the sit more to see what else i can learn.
Thanks,
Gig

P800 rom flashing problem

I have an unbranded Chinese P800 from eBay and would like to upgrade it to WM 6.0. What I have onboard :
1. WM 5.0 OS 5.1.525 (Build 15364.3.4.4)
2. Processor ARM926T OMAP730
However, one perculiar thing is that I can't find any Device Info on IPL, SPL, Radio ROM etc. I've tried using WST 4.2.2 but to no avail. I'm using my Lenovo S10 Netbook running XP and ASync 4.5. What I've managed to do are :
1. Run USPL, it goes from 0.. to 60.. and hangs, I reset my P800, USPL resumes to 70..100 and the RUU program starts,
2. the screen on my P800 turns dark with the Linux Penguin and some message of mapping, preloader etc comes on temporarily before Windows comes on again,
3. RUU runs, upgrading to image 9.99 (original image is blank-no info), when UPDATE ROM IMAGE ON YOUR PDA PHONE comes on it never gets to more than 0% (no blue progress bar), my P800 screen goes dark, loses connection and I get ERROR(260).
I have done this several times and there is no way I can verify if the CID is unlocked as I can't get the SPL info anywhere. So I will appreciate any help I can get. Thanks in advance.

Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem

mouse.co.nr said:
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
Click to expand...
Click to collapse
Hi mouse.co.nr,
Many thanks for your reply and pointing to the right direction. I'll get to it asap and post the outcome (success I hope!)

Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse

mouse.co.nr said:
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
Click to expand...
Click to collapse
Hi mouse.co.nr,
Well noted and I'll keep this in mind. From your experience have you ever tried the SDHC.cab so that your phone can read the micro SDHC? I ran it in my phone and now my STORAGE CARD is gone! Anyway, thanks again. Cheers!

Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse

mouse.co.nr said:
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
Click to expand...
Click to collapse
Hi Mouse,
Thanks to you my STORAGE CARD problem is solved! However with regards to my ROM update I'm still a little confused.I've managed to patch the artemis_jumpSPL_pof_v1.nb using Kermit the Frog(jumpSPL.exe). After that I run the RUU again but I still get the same result-0%Can you tell me how or show me the relevant threads?

Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse

mouse.co.nr said:
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
Click to expand...
Click to collapse
Hi mouse,
Actually "Kermit the Frog" is the icon for JumpSPL.exe. Anyway, like I've mentioned in my first post everything seems OK except that I can't check for the SPL and when the RUU runs it never gets to more than 0% and then I lose connection and get ERROR 260. I'll be trying again and let you know of the outcome. Once again, thank you, I really appreciate your help!
salimbs.

Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility

mouse.co.nr said:
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
Click to expand...
Click to collapse
Hi Mouse,
I'm open to all suggestion. I'll try it again and we'll see. Thanks.

I'm afraid that I've not met with any success after trying all the combination and tricks mentioned in this thread. Every time at the part of the RUU flashing it never goes beyond 0% then I lose connection and get ERROR 260. I would appreciate any help I can get, and thank you in advance.

Hallo,
i have got a p800 from china and have the same problems. I tried all things but the update doesnt work. The connection always interupts with err260.
regards

Asus p535 info and english unofficial roms

I've been searching for two whole days to find some WWE cooked roms for the asus p535, and i could barely find anything, so i have been searching for roms on russian sites (i love my mom, she translated a lot of info for me) I am posting this because almost 99% of links from English forums/websites are dead, and someone might be in desperate search for rom updates, just like i was. I can't put up the credits though because, as i said, i don't speak russian and i didn't want to bother my mom with it more than necessary.
I will try to periodically update this post in case i find anything new.
TO FLASH ANY ROMS YOU MUST FIRST RUN THIS EXE IN ORDER TO UNLOCK YOUR LANGUAGE
http://asapload.com/info?id=131732
Instructions on flashing roms:
1. Get a mini sd card 2gb or less
2. Format it to Fat16 filesystem (recommended, not necessary)
3. Place ASUS.UnlockLangID.exe and GalaxyII.nb0 on the ROOT of your sd card
4. Run ASUS.UnlockLangID.exe
5. Press dpad up + record + camera + power buttons simultaneously and then push the soft reset button
6. You should see a white screen with text on it, insert your usb cable or usb charger and the update should start.
7. After the update it will automatically soft reset your device
WINDOWS MOBILE 6.1 ROMS:
English lite 6.1 rom MINI: http://asapload.com/info?id=131730
English with some things russian (Some settings and voice command) : http://asapload.com/info?id=131733
English touch flo 6.5 styled rom:http://asapload.com/info?id=131735
English HTC Diamond styled 624MHz overclocked rom:http://asapload.com/info?id=131734
(Found the same on xda: http://forum.xda-developers.com/showthread.php?t=403882)
6.1 Clean:
6.5 HTC Home:
(Source: http://allppcrom.blogspot.com/2008/10/asus-p535-rom-wm61-v476108.html)
WINDOWS MOBILE 6.5 ROMS:
WM6.5_23004 (older 6.5 with slim startbutton/app rows):http://asapload.com/info?id=131737
WM6.5 with SPBshell (I use this one. It has 128mb ram support, and you can disable spbshell by deleting /windows/start up/spbshell.ink shortcut): http://asapload.com/info?id=131729
WM6.5 Pdaviet: http://asapload.com/info?id=131738
(Original link: http://www.ctrlpda.com/showthread.php?56671-ASUS-P535-ROM-WM6.5-PDAVIET-%28Build-23064.5.3.0%29&)
Linux for asus p535
NOTE: This is not a ROM! For installation instructions refer to the manual in the link below:
http://sites.google.com/site/siteofhx/Home/linux/linux-running-on-asus-p535
Link for the 64mb version:http://asapload.com/info?id=131740
Link for the 128mb version: http://asapload.com/info?id=131742

5. Press dpad up + record + camera + power buttons simultaneously and then push the soft reset button
Is any other way to do this without the reset buton? ... because mine is broken.
Thanks.

you can't gog to bootloader without combinaison button... if your button is broke, you can easily open your P535... mine is still here... sometimes i use this one to test my skins on small res...

I already opened my P535, i've just bought it. It had broken screen(the screen is fine but the touch does not work) and have change it myself by my P525 Asus screen(that works fine). Same screen P535 and P525, same batery....
I also want to try Android on P535.I loved P525 so much and now it looks very bad.
I think I need to take P535 to service, for repair that reset buton .
I wonder if there is Titanium to work on WM6 P535. Does anybody knows?
Sory for my bad english.
Thanks.

Windows mobile 6.5 works like a charm on P535... when i use my P535, i made some rom with a Friend... French & english version...
support 64 Mb & 128 Mb, clean and full stuff version...
LastesT ROM are here... http://forum.xda-developers.com/showthread.php?t=508315
About your broken Reset... you can use USB flash method... now i remember method using actve Sync...
Read more info with link !

Thanks, but I read on your site (i think) and in the tutorial it say this
"Connect your P535 to PC via USB port. Press Rec+Power button (at the same time) and then Soft Reset (Press Rec+Power button util Boot Loader program startup you will see message Waiting)."
This mean that I also cannot instal, and i am afraid to brick the phone.
To P525 I managed to change many times, in miniSD mode.
By USBloader I managed to brick my Samsun Wave s8500, so if I need to press Reset... I am afraid to brick this one to. (Of course Wave works now thanks to a friend... after 8 weeks of trying...)
But there isn't Titanium for WM6? I only want to have Titanium for the menu, not necesarly WM6.5, if it's posible.
Anyway in few days I'l take the phone to service to see that the reset buton can be fixed.
Very good job with that roms.
Thank again.

1 - TITANIUM is WM6.5 basic UI
2 - USB loader is only used to turn your device on bootlader mode then flash using MiniSD
3 - Flash is easy as well... my P535 has been flashed more than 500x... and is still alive... Flash on P535 is very easy...
If you have some trouble... you can upgrade using official method to WM6.1... no more version after this one...
Have fun !

I mean I am afraid only because cannot press reset... If the reset buton can be fixed I will instal WM6.5 ...
I tried official (I think), update by WI-FI and update by PC-Sync ... there is an error, code 80072ee7 ...
I'l wait to fix the reset buton.
Thanks for the answers.

Can someone help me please?
5. Press dpad up + record + camera + power buttons simultaneously and then push the soft reset button
when i do this, i get the white screen with do i want to reset or just carry on green button for reset, so if i press this, it just simply resets my current os and hasnt loaded a new rom
i can get to the same screen by just pressing reset and dpad up.. is this the same?
how do i actually get it to load the new os off the sd card? as i seem to fail at that point
thanks

its ok done it now, but all roms seem pretty much same crappy
does anyone have a link to one of the ones that run something like the htc touch flo interface? i have seen this one but couldnt find a donwload for it

I have instaled the one like HTC(I think) ... name is "rom0.zip"=> galaxyII.NBO I think is the one with SPBshell
I like this phone now more than S8500( this only has superamoled screen), on this OS
Can the screen be replaced by one with 256k colors?? The phone is better with a better screen. Don't knnow how to explain .
Thanks to Award982 for making this topic.
Thanks to Lesscro for creating this ROMs

lesscro said:
Windows mobile 6.5 works like a charm on P535... when i use my P535, i made some rom with a Friend... French & english version...
support 64 Mb & 128 Mb, clean and full stuff version...
LastesT ROM are here... http://forum.xda-developers.com/showthread.php?t=508315
About your broken Reset... you can use USB flash method... now i remember method using actve Sync...
Read more info with link !
Click to expand...
Click to collapse
Lesscro, i tried downloading from your site but your links from multiupload do not work. Can you please re-upload them? And also, do you maybe still have the kitchen for it and would mind sharing?

jason4656 said:
its ok done it now, but all roms seem pretty much same crappy
does anyone have a link to one of the ones that run something like the htc touch flo interface? i have seen this one but couldnt find a donwload for it
Click to expand...
Click to collapse
English touch flo 6.5 styled rom:http://asapload.com/info?id=131735
Try this one, but it isn't something very good... asus p535 is pretty much a dead phone now, no one has one these days, and i bought mine by accident two weeks ago (my neighbors father had one for gps and didn't need it anymore), because i've been looking for one for three years already (i had one but it died and i sold it for parts). There are barely any people still using this phone. If i get an english kitchen by any chance, i will try to make a good stable rom with 6.5 wm and touchflo 2d.

award982 said:
English touch flo 6.5 styled rom:http://asapload.com/info?id=131735
Try this one, but it isn't something very good... asus p535 is pretty much a dead phone now, no one has one these days, and i bought mine by accident two weeks ago (my neighbors father had one for gps and didn't need it anymore), because i've been looking for one for three years already (i had one but it died and i sold it for parts). There are barely any people still using this phone. If i get an english kitchen by any chance, i will try to make a good stable rom with 6.5 wm and touchflo 2d.
Click to expand...
Click to collapse
for some reason i can never access that site, is it working for you guys? ive tried from 2 ips and 2 computers, get same problem.

Yeah, it seems down :/ weird, it's not long ago since i've uploaded the roms up If you use skype i could send you it through there

can you transfer on big file or something?

Sorry about delay, i serach on my HDD... i can't found any ROM or any kitchen...
at this point... i have no more nb0 available... multiupload seems to be dead actually... maybe last build is still active...
but i need check multiupload !!
last build is 28238 Wm6.5.5 WWE 64 & 128 Clean & full version

Hi, user your rom, ok?
with WCE 6.5, you can do more

GPS Maps
I wonder how to download maps for GPS...
I connect to computer and try to download by tomtom automatically, but it's an error., I guess because is tomtom for HTC.
How cad I have GPS with maps?
I instaled WM6.5 with sbbshell
Thanks.

if you use tomtom, you need buy it... XDA is not a warez site...