Hi Guys! I have problem with my O2xdaIIi! I can't use bluetooth on my device! When I use bluetooth It started a few seconds and I see: " Sorry! Bluetooth can no longer be used because the license is expried"
I have to hardreset, ReUprom but it do not work! HELP ME! Pls
That sure is somewhat unusual. Did you make any recent changes to your PPC such as new software or ROM upgrades?
Oh! I try to resize storage to 61.20 Mb! But I had to Upgrage to new rom o2 1.11.0 WWE! Uhm!! Now i still see error "Sorry! Bluetooth can no longer be used because the license is expired." when I turn on BT!
Any tell me the way to fix this problem???? Pls
Oh! I try to resize storage to 61.20 Mb! But I had to Upgrage to new rom o2 1.11.0 WWE! Uhm!! Now i still see error "Sorry! Bluetooth can no longer be used because the license is expired." when I turn on BT!
Any tell me the way to fix this problem???? Pls
ngoctuan said:
Oh! I try to resize storage to 61.20 Mb! But I had to Upgrage to new rom o2 1.11.0 WWE! Uhm!! Now i still see error "Sorry! Bluetooth can no longer be used because the license is expired." when I turn on BT!
Any tell me the way to fix this problem???? Pls
Click to expand...
Click to collapse
Ha yes this is most likely to be if u installed software to do with umm hacking or mobiluck sumtimes does it i had this problem but toke off the software and software u put on ur phone to do with bluetooth uninstall it untill it works again thanks
Related
Hi
Yesterday my camera function doesnt work anymore. when I push the camera butten a message appears with "Camera is geen geldige Pocket PC-toepassing" ( transelated: Camera isn't a valid Pocket PC-application.)
It just doenst work :S
I also triend to run the camera.exe from /windows but then I get thesame error.
Some days a go I jused pagepool 6mb? Could that be the problem??
I hope someone can help me with this.
What kind of phone do you have? maybe get someone with the same phone to send you their camera.exe?
what about trying to hard reset your phone? or install the RUU depending on what Rom you're running.
I have the HTC p4350
and i'm using the official dutch wm6 rom.
with batterystatus (overclock van 247mhz)
and a 6mb pagepool.
I hope someone can help me.
Nobody an idea???
Try Hard Reseting your phone... or try to find and run the RUU for your phone ... maybe your carrier has it available for download?
Hi... I've a problem with bluetooth... i can send file but I can't receive files from other device... they said failed... uff... what can I do?
go to start-settings-connections-beam and enable the options that you see. then go to the manager comm-bluetooth-ftp and activate bluetooth explorer.
Bluetooth Error
I have same problem with mine. Changed settings as suggested but still can't receive files. All help is appreciated.
What's the other device?
I think it might have something to do with an OBEX regedit needing to be done...not sure what it is exactly but check the wiki...
Bluetooth Error
Lordsmiff said:
What's the other device?
I think it might have something to do with an OBEX regedit needing to be done...not sure what it is exactly but check the wiki...
Click to expand...
Click to collapse
Had a search, and haven't found it yet, could you pls tell me what OBEX regedit is. I have tried a new radio for Nik 100 but no change. All help appreciated.
I got it!! i had the same problem but no my dual is working fine!
Go to "settings" then "connections" and on "Beam" you check the box "receive all...." (is the only one there )
Hope help you
i've got that enabled but can't receive files, neither from other phones, nor from my pc... what's that with the registry?
The same
Billokko said:
Hi... I've a problem with bluetooth... i can send file but I can't receive files from other device... they said failed... uff... what can I do?
Click to expand...
Click to collapse
Hello. I've the same problem. I've proved with four phones (htc,sony,nokia) and with the pc and can't receive by bluetooth.
Have the solution?.
thanks.
Well.. I have a TD and i CAn recieve files from other phones, conputers etc.. So there IS something amiss with the settings on YOUR niki probably.
No.
My configuration is ok. I have a kaiser, I had qtek 9100, s100.
I know what I did.
Yesterday I receive from kaiser; but today I can't.
Regards.
Hi everyone, I just recieved my brand new Diamond2 in Czech localisation (original from retailer) and after first boot I got this error:
Error
Install
\Windows\OpenCZ_Settings_Topaz.CAB
failed, code=0x80090006
I assume its the czech localisation but any advice? If I dont solve the problem, Ill send it on monday back
Regards
Pylorus
There are a couple of things you can do:
- Manually try to install it using the file explorer: \Windows\OpenCZ_Settings_Topac.CAB
- Make a hard-reset (hold Vol-up & Vol-Down and press the reset button under the battery case to see if it happens again.
Thx for swift reply ...
- I tried several hard resets and booting with / without SIM and or microSD - still the same error
- I managed to get the phone partially working, because you can move the error window aside and access the startmenu and open explorer. I executed the file manually, but got the error message: "The program cannot be installed because it is not digitally signed with a trusted certificate."
Unfortunately I can not access the phone via USB (first customisation hasnt finished and active sync does not open) and I'm afraid flashing the device with another ROM because of warranty
Any Idea how to tweak the phone to lower the phones security allowing installing not signed cabs?
Thx...
well if you get this error even after a hardreset, you should definitely send it back..
OliveJeans said:
well if you get this error even after a hardreset, you should definitely send it back..
Click to expand...
Click to collapse
I will ... but any idea how to lower phones security?
pylorus said:
Hi everyone, I just recieved my brand new Diamond2 in Czech localisation (original from retailer) and after first boot I got this error:
Error
Install
\Windows\OpenCZ_Settings_Topaz.CAB
failed, code=0x80090006
I assume its the czech localisation but any advice? If I dont solve the problem, Ill send it on monday back
Regards
Pylorus
Click to expand...
Click to collapse
My device from Czech too. I found this cab file in Windows folder, if you need it i'll upload it for you.
pylorus said:
Thx for swift reply ...
I executed the file manually, but got the error message: "The program cannot be installed because it is not digitally signed with a trusted certificate."
Any Idea how to tweak the phone to lower the phones security allowing installing not signed cabs?
Thx...
Click to expand...
Click to collapse
Try sdkcert. That should do what you want install it before installing your .cab what is needed
Problem solved - i sent the device back and the whole board was replaced - new IMEI, but now its working like a charm
for the future..I have had a same problem with my TD2..After few hours I found out that I could this error off in taskmanager. Then it worked.. It was just some czech layout for my topaz but I did not want it either.. So for those who will buy TD2 with this error and don´t want chzech langugage on it, just close it in taskmanager..
I have an unbranded Chinese P800 from eBay and would like to upgrade it to WM 6.0. What I have onboard :
1. WM 5.0 OS 5.1.525 (Build 15364.3.4.4)
2. Processor ARM926T OMAP730
However, one perculiar thing is that I can't find any Device Info on IPL, SPL, Radio ROM etc. I've tried using WST 4.2.2 but to no avail. I'm using my Lenovo S10 Netbook running XP and ASync 4.5. What I've managed to do are :
1. Run USPL, it goes from 0.. to 60.. and hangs, I reset my P800, USPL resumes to 70..100 and the RUU program starts,
2. the screen on my P800 turns dark with the Linux Penguin and some message of mapping, preloader etc comes on temporarily before Windows comes on again,
3. RUU runs, upgrading to image 9.99 (original image is blank-no info), when UPDATE ROM IMAGE ON YOUR PDA PHONE comes on it never gets to more than 0% (no blue progress bar), my P800 screen goes dark, loses connection and I get ERROR(260).
I have done this several times and there is no way I can verify if the CID is unlocked as I can't get the SPL info anywhere. So I will appreciate any help I can get. Thanks in advance.
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
mouse.co.nr said:
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
Click to expand...
Click to collapse
Hi mouse.co.nr,
Many thanks for your reply and pointing to the right direction. I'll get to it asap and post the outcome (success I hope!)
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
mouse.co.nr said:
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
Click to expand...
Click to collapse
Hi mouse.co.nr,
Well noted and I'll keep this in mind. From your experience have you ever tried the SDHC.cab so that your phone can read the micro SDHC? I ran it in my phone and now my STORAGE CARD is gone! Anyway, thanks again. Cheers!
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
mouse.co.nr said:
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
Click to expand...
Click to collapse
Hi Mouse,
Thanks to you my STORAGE CARD problem is solved! However with regards to my ROM update I'm still a little confused.I've managed to patch the artemis_jumpSPL_pof_v1.nb using Kermit the Frog(jumpSPL.exe). After that I run the RUU again but I still get the same result-0%Can you tell me how or show me the relevant threads?
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
mouse.co.nr said:
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
Click to expand...
Click to collapse
Hi mouse,
Actually "Kermit the Frog" is the icon for JumpSPL.exe. Anyway, like I've mentioned in my first post everything seems OK except that I can't check for the SPL and when the RUU runs it never gets to more than 0% and then I lose connection and get ERROR 260. I'll be trying again and let you know of the outcome. Once again, thank you, I really appreciate your help!
salimbs.
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
mouse.co.nr said:
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
Click to expand...
Click to collapse
Hi Mouse,
I'm open to all suggestion. I'll try it again and we'll see. Thanks.
I'm afraid that I've not met with any success after trying all the combination and tricks mentioned in this thread. Every time at the part of the RUU flashing it never goes beyond 0% then I lose connection and get ERROR 260. I would appreciate any help I can get, and thank you in advance.
Hallo,
i have got a p800 from china and have the same problems. I tried all things but the update doesnt work. The connection always interupts with err260.
regards
Hi guys,
I did a hard reset 3 days ago, and ever since haven't been able to download/install marketplace. My internet connection is working fine and I've tried both with 3g and Wifi. It keeps giving me an error message saying "There maybe a problem with marketplace service right now. Check your connection and try again later."
Anybody knows anything about that? Is it really a problem with Marketplace or is it my phone? Any help would be appreciated
I did even download the cab file from the internet, but when trying to install that one it says "Installation as unsuccessful. The Program can#t be installed because it does not have sufficient system permissions".!!
Thanks,
Hallaj
I did a hardreset too, and since then I can't get anything from Windows Marketplace either...
Keeps telling me that it can't logon to the Windows Marketplace servers, and that I should try again in a few seconds...
Also tried the regedit with no luck...
Any help would be appriciated greatly!
Stock danish ROM 1.66
Thanks in advance.
Hallaj85 said:
Hi guys,
I did a hard reset 3 days ago, and ever since haven't been able to download/install marketplace. My internet connection is working fine and I've tried both with 3g and Wifi. It keeps giving me an error message saying "There maybe a problem with marketplace service right now. Check your connection and try again later."
Anybody knows anything about that? Is it really a problem with Marketplace or is it my phone? Any help would be appreciated
I did even download the cab file from the internet, but when trying to install that one it says "Installation as unsuccessful. The Program can#t be installed because it does not have sufficient system permissions".!!
Thanks,
Hallaj
Click to expand...
Click to collapse
adjust date and time to your region and it will work ,happened to me
hoss_n2 said:
adjust date and time to your region and it will work ,happened to me
Click to expand...
Click to collapse
Worked for me once, updating the FaceBook app...
But after the reset, it didn't work anymore.
Tried applying the same changes as before, but no luck.
I then disabled the "use network ressources to adjust time/local" option, and now it works as it's supposed to.
Since when have the auto-time-update been an issue?