Friends,
I have the EXEC and when im using TOMTOM i receive a call, does anyone know how to answer it and Enable the handsfree speaker? I found that i was driving, and i got the call alert and pressed Answer, however i had to pick the exec up, and use it as a normal hand-ear. Anyway of enabling Hands Free?
MANY THANKS
Try holding the Green Button until the speaker is activated + - 3 Seconds
Then switch of Aircon / radio / close the window ...
I must say that Radio 1.06.00 improved the Speaker volume
Regards
Skillie
or buy a bluetooth headset (circa £30 these days) and configure the auto answer feature.
Even without auto answer on my MDA Pro interupts TomTom with the usual call anouncement and I simply hit the button on my headset to accept the call.
i'm having the same problem..
when i use tomtom with bt gps.. and my bt headset.. i cannot make or answer any calls..
the ringtone doesn't sound normal either.. (no continues ringing)
multiple bluetooth devices problem?
TomTom & Nokia Car Kit
I have a similar problem,
I am using a Nokia CK-7w BT Car kit, and a generic BT GPS receiver.
Upon receiving a call, the phone rings as normal, swtiches the stereo off and I take the call - however once on the call I lose the connection to the GPS receiver.
IT must be possible for the two devices to work together as I always receive the calls through the Car Kit.
Any ideas?
TomTom & Nokia Car Kit
I have a similar problem,
I am using a Nokia CK-7w BT Car kit, and a generic BT GPS receiver.
Upon receiving a call, the phone rings as normal, swtiches the stereo off and I take the call - however once on the call I lose the connection to the GPS receiver.
IT must be possible for the two devices to work together as I always receive the calls through the Car Kit.
Any ideas?
Dunno, my O2 Exec with Tomtom 5.2 has no problems. I use a globalsat receiver and currently a Moto HS820 headset, (previously a Jabra BT200, but I broke that).
Navigates fine, when I recieve a call, tomtom is muted, the exec and the headset ring, I press the answer button on the headset, and can take the call, Tomtom will continue to navigate without voice prompts. Finish the call via headset button again and Tomtom becomes un-muted and continues as before.
So the Exec version of the universal at least is more than capable of managing the tasks you require via multiple bluetooth connections. I run in corporate mode if that makes any difference.
tomtom 5?
Im using tomtom 5.21 (i think) with a Bluetooth handsfree kit. Jabra over the ear type. When a call comes in and TomTom is runnin a message flashes up on screen notifying of incoming call. I can answer the call using the soft answer button on screen or by pressing the pickup button on my headset. When I do the message on screen goes away and TomTom carries on just with the sound muted. When I hang up by pressing the call button on my headset TomTom unmutes itself.
Certainly with a bluetooth handsfree kit I have found tomtom works really well.
Hi,
I was wondering, is it possible to use bluetooth car kit on a Wizard at the same time it is using its bluetooth connection to talk to a bluetooth GPS dongle (Holux 236)?
TIA
i use a parrot car bt car kit and the same holux gps receiver sometimes at the same time and have no problems.
I also use a Holux 236 and talk with my earpiece at the same time. I haven't had any problems yet.
Nice one, thanks for that.
This should be perfectly possible.
The Bluetooth standard v1.2 allows a device to connect to multiple devices via bluetooth at the same time.
Not sure on the exact specs, but can imagine the device time splitting data from multiple devices with certain connection types having different priorities?!?!
So, having a BT Headset and GPS at same time - headset device should be ok, but GPS data may be slower to update....
Thanks again.
Can you have multiple active BT connections on the Tytn?
I would like to connect my Tytn to my Parrot handsfree and simultaneously to a GPS Receiver.
Is this possible?
Yes, it's possible. I regularly have both a headset and a GPS device connected at the same time...
that's great. thanks for the response!
How have you managed to do this? I have an Audi A6 with BT kit and when I receive calls whilst using TomTom, i can receive the call but nothing comes through the speakers.
I am running TT 5.21 and have outgoing port COM0 and incoming COM9, Audi kit is set up correctly (i.e. for headset)
Any help much appreciated
I have a Parrot CK3300 blutooth car kit and find that it works great if I make a call. If I receive a call the bluetooth connection drops out and I have to pickup the phone.
For a while I was thinking that there was an issue with the way I had my phone setup until my wife got a JasJam as well. She has the same problem with her phone. Now we have another Parrot kit in her car and it does the same thing.
Is this a problem with the carkit, phone or bluetooth?
I have a Nike and also got a Jabra BT3030 bluetooth headset and a Freecom keychain GPS.
When the GPS is connected and I turn on the headset, the GPS drops out, is there a way to have them both running together?
Thanks
Jonny
I use a Dual too, and in my car I have:
Parrot hands-free (BT)
GPS receiver (BT)
Each time I enter my car, the parrot detects and connects to dual, and the GPS conects either.
Even when I am in call the gps continue to refresh without problems
It works with my other bluetooth head set but this jabra one is a stereo headset with hands free.