Bluetooth issue - 8525, TyTN, MDA Vario II, JasJam General

I have a Parrot CK3300 blutooth car kit and find that it works great if I make a call. If I receive a call the bluetooth connection drops out and I have to pickup the phone.
For a while I was thinking that there was an issue with the way I had my phone setup until my wife got a JasJam as well. She has the same problem with her phone. Now we have another Parrot kit in her car and it does the same thing.
Is this a problem with the carkit, phone or bluetooth?

Related

Bluetooth GPS & Bluetooth Car kit = calls fail

I am using an Bluetooth I-Blue 737 GPS receiver and a Bluetooth Nokia CK-7W Car kit for receiving & making calls.
When the GPS receiver is connected and I receive a phone call, the pda rings but when i answer the call with the bluetooth car kit the call fails after a few seconds.
Has anyone else experienced problems with multiple bluetooth devices connected at the same time?
Is it possible to have both working together?

Replacement bluetooth stack or fix for car kit?

Just bought a x7501 and I love it so far with 1 exception, it doesnt appear to like my bluetooth car kit in my 2007 nissan altima
It paired perfectly and everything seemed to go ok, but when I receive a call I can pick it up with the car kit but then it drops the call off the car kit (within 1-2 seconds) then reconnects but without sound (I cant hear people through the device speaker or the car kit). Whats weird is it does not drop the call, it seems to lose connection with the car kit then reestablish (the call timer goes 00:00, 00:01, 00:02, CALL ENDED, 00:00, 00:01, 00:02).
My x7501 seems to work fine with my BT800 headset, and the car kit worked perfectly with my old cingular 8125 (wm5). I did some searching on the forums and saw people with similar issues with car kits but nothing quite like this and nothing specific to this device...On my old 8125 I was using a replacement widcomm stack, is there a replacement stack for the athena I could try to see if it solves my issues?
I have Jetware installed, tried with and without it same problem.
AdmiralUD said:
Just bought a x7501 and I love it so far with 1 exception, it doesnt appear to like my bluetooth car kit in my 2007 nissan altima
It paired perfectly and everything seemed to go ok, but when I receive a call I can pick it up with the car kit but then it drops the call off the car kit (within 1-2 seconds) then reconnects but without sound (I cant hear people through the device speaker or the car kit). Whats weird is it does not drop the call, it seems to lose connection with the car kit then reestablish (the call timer goes 00:00, 00:01, 00:02, CALL ENDED, 00:00, 00:01, 00:02).
My x7501 seems to work fine with my BT800 headset, and the car kit worked perfectly with my old cingular 8125 (wm5). I did some searching on the forums and saw people with similar issues with car kits but nothing quite like this and nothing specific to this device...On my old 8125 I was using a replacement widcomm stack, is there a replacement stack for the athena I could try to see if it solves my issues?
I have Jetware installed, tried with and without it same problem.
Click to expand...
Click to collapse
Hi,
try the following:
Before you enter your car, disable bluetooth on the x7501. (Make sure your headset is turned off to prevent autoreconnection from your headset to your x7501)
Enter the car, turn on bluetooth on the x7501 and after that turn on your car kit.
This procedure helped me with nearly the same problem.
Cheers
c0rnholio said:
Hi,
try the following:
Before you enter your car, disable bluetooth on the x7501. (Make sure your headset is turned off to prevent autoreconnection from your headset to your x7501)
Enter the car, turn on bluetooth on the x7501 and after that turn on your car kit.
This procedure helped me with nearly the same problem.
Cheers
Click to expand...
Click to collapse
hmm ill give it a try, ill have to figure out how to turn off the carkit. thx
AdmiralUD said:
hmm ill give it a try, ill have to figure out how to turn off the carkit. thx
Click to expand...
Click to collapse
Shouldn't be to hard. I think it is off when the car is off...
c0rnholio said:
Shouldn't be to hard. I think it is off when the car is off...
Click to expand...
Click to collapse
haha yea i thought about that as i got int the car. sadly i tried it and it didnt work, any other ideas?
Whats weird is the cingular 8525 is on the official approved working devices list on the nissan website. I assume the 8525 uses the default microsoft bt stack which gives me some home. Could it just be registry setting differences between the device that would cause the problem?

Bluetooth Car Kit?

Hello all,
Does anyone have a recommended bluetooth car kit which they have successfully used with the Magic? I'm talking about any of the "newer" generation of car kits, which sychronise your contacts on the car kit display...
Anyone?
I've got Parrot CK3000 Evolution and it does work with Magic, however, there are two problems with it:
1. Sometimes (more often than not) the phone is connecting to Parrot after 4-5 minutes, even if it is the only phone registered with the kit.
2. It is not possible to transfer phonebook to the kit, and even if I transfer it from laptop, then the kit still refuses to do voice dialing (built-in one, not on HTC).
Contact synchronysing works fine on my Peugeot 207, which has the parrot CK 4100 device.
But I have another problem, the sound isn't transfered to the car speaker despite the fact that all wheel-on-command are working....
any ideas...
I've got the same malfunctions with my CK4100 and my HTC Cruise. I'm testing with my Rhodium.
I've read about updating the BT CarKit (KC 20/KC21, sogt 4.8->5.1) to fix it...
Have you any new about that?

Connecting to my BT car

Hi,
I have a Touch 2 and I am having troubles conneting it to my Volvo BT carkit.
With my S730 evrything worked fine.
Now the phone paires with the car and syncs the adressbook, but when I initiate a call from the car or the phone, the carkit just doesnt know he is in a call and does not mute the radio. I don't hear any sound through the speakers at all, but the phone thinks it is connected to the carkit and is in handsfree. Pretty anoying as you can imagine.
I upgraded the car's BT stack to the latest version 04.23_R but with no result. Disabling the data connection worked for some people but not for me.
Do you guy's have any registry hacks or procedures I could try?
The old phone worked great so there at least should be some backwards compatibility.
Thanks,
Jan

Can't Call With BT by Car

Hi there
Once I bought this phone, I pair it by Bluetooth to my car, But I just can listen to music and can't call any one or having phone call. before that my last phone works fine with Car.
how can I fix it?

Categories

Resources