I try to update and I need to hard reset and I do this and after hard reset my dopod blocked on start! How I can resolve this problem? After this I try flash new rom and I have error INVALID MODEL ID?
btw...yesterday I make full backup with aWizard and now I can restore because I cant turn on my dopod only bootloader can!Have come other method to restore backup?
Related
hi all,
Ive wanna to try a upgrade from the romkitchen.
This upgrade to WM2003 SE has failed.
It Says:
Upgrading has failed,
remove the cable,
and perform a normal reset.
I have done a normal reset but its hang on the upgrade screen.
Then ive done a hard-reset and its still on that screen!
Can someone help me??
Thx.
You will probably need to flash your phone using sd card method.
thx.
problem fixed
I tried upgrading for the first time. I picked Windows Mobile 2003 Second Edition (3.04) from the following link:
http://wiki.xda-developers.com/index.php?pagename=ROMVersions
The upgrade was successful however my wallaby freezes at the ozup. I can reach the bootloader if I hold the power button and soft reset.
I do not have a backup of my rom image (it was initially T-Mobile PPC2002 3.14.40_ENG)
Which rom image should I use with the XDAtools to flash back? Where can I get that rom?
Please advise.
You could try the 4.01.12 ROM IMage, but the problem can still exist. There have been a few devices, that are just working with PPC2002.
If you really have such a device i would suggest the 3.17.03 ROM....
Stefan
I have a phone locked to the Taiwanese CID, and therefor tried to unlock this so that english rom upgrades could be installed. Now, to do this I first had to do a downgrade, which I got from the internet, pdamobiz.com_downgrade_and_unlockcid.rar . After the downgrade, the phone was suppose to restart and again enter the first fase of restarting. This did not happend, it just stopped at the first picture, the one with the Dopod logo and info about OS and other things. Completely locked.
This means that I can not connect to my computer. Also, a hard reset is not possible, after formating the disk, the phone just returns to this first picture, without any reinstalling of the original rom. What should i then do?
Could somebody please help get my phone back on its feet?
The OS is now 1.0.13.21
hi,
I recently buy a SPV M600 and this was working fine! When a try unlock that for put a difrent company sim that never start up again! Now the item freeze on first screen, where that show the IPL,SPL,OS and GSM versions!
Anyone have solution for this problem? I try update the rom, for a RUU but the problem still .
Best regards
gats
Have you tried a Hard Reset? (Hold the Comm Manager button and the Camera button and soft reset)
yes, i try a hard reset, phone restart and freeze again!!
I think about it , and the phone are Sim locked and CID locked, is for that reason he freeze?
Is it a G3 device or a G4 device?
The SIM Lock shouldn't cause this, but try taking the SIM out and seeing what happens.
is a G4 model.
Sim card was always out, because it isn't unlock to put my sim.
Nobody can hep me? I upgrade the rom for the original of orange in same language but the phone continue freezing at start!
I don't no what i can do more!
Normally, you should SIM unlock before flashing the ROM...
What brand is the device?
I think i found the problem! I didn't flash the rom before updating and didn't unlock CID. I am thinking now, how to repair the phone now!
So, the phone are sim locked and CID locked, i ll CID unlocking with hardspl, but i ll not can copying the necessery files into pda directory, like this said on "Rom flashing for dummies" on Wiki!! So can i flashing the rom from BootLoader?
The phone is in used condition, but it all functionally becuase i work with that before update the rom and have this problem!
Best Regards
Gats
If it's in/can get to bootloader, it should be possible to flash a WM5 NVID ROM. from there, you can HardSPL, SIM unlo ck and then flash a New ROM.
If it's in/can get to bootloader, it should be possible to flash a WM5 NVID ROM. from there, you can HardSPL, SIM unlo c
ck and then flash a New ROM.
hello, i tried to upload new rom but something goes wrong, computer hang and now my pharos only shows pharos logo and versions ONBL, SPL, GSM, OS. I can put it in bootloader mode, but unfortunatly my spl is 1.11.0001 and everytime i try to upload any rom which is posted on this forum i got error: invalid vendor id or error: file is corrupted. Is there any way to unbrick it? any way to upload hardspl to this device now? I dont have any dump or other things.
have you tried with hard reset?
press and hold softkey left + softkey right + power button
Yes, i tried. Hard reset went ok. Format FAT ok. Restart and the still the same.
the only way is to flash an official rom
have you tried this?
Yes, i tried both. On both after 1% devide reset and update utility gives ERROR[294]: INVALID VENDER ID.
my friend have the same problem,he buy pharos with software crashed for repair for himself...
it was dutch edition and any hard spl or official rom doesn't work,
pharos shows boot screen and then he stucks
how can we wake him up?
you can try flashing from the sd card... but this is a difficult problem ... hard spl should work and also shipped rom should work (for the guy with dutch Pharos try the dutch shipped rom)!