hey this my first post so plz be nice!!
i got the t mobile ameo and i tried unlocking it i followed the instructions to the letter.
but something went wrong and if possiable how can i reset it back to origional settings (t mobile) or even unlock it to what i wanted so my 3 simcard can go in there. or orange.
plz help
gareth
garethmob said:
hey this my first post so plz be nice!!
i got the t mobile ameo and i tried unlocking it i followed the instructions to the letter.
but something went wrong and if possiable how can i reset it back to origional settings (t mobile) or even unlock it to what i wanted so my 3 simcard can go in there. or orange.
plz help
gareth
Click to expand...
Click to collapse
Hi, and welcome to the forum. (See! I was nice!)
Telling us that 'something went wrong' isn't really enough for us to go on.
You need to describe exactly what happens to your Ameo when you power it up, so we can give the correct advice. What do you see on the screen?
sorry lol
when i do the hard reset it does the usb boot screen but goes to a gray screen that asks me to format microdrive and then flash it. i think the op system been wipped but i cant get it to the rainbow usb boot screen for active sync to fix it
You can get it into bootloader mode by holding down the comm manager and camera buttons, then soft resetting.
From there you can re-install WM6. If you didn't succeed in unlocking the unit, you'll need to use the T-Mo compatible version of WM6 which you can find here - http://uploaded.to/?id=wbbw2u
hey, im a newbie, and I need help...
I was trying to install TouchIT so I downloaded the applications needed from a zip file I found here on the website...
I installed ASerg Policies, Cert_spcs, and Enablerapi and did a soft reset...cause I thought I needed all that....
...than I tried to run "1__UPGRADE_ROM" and in the middle of that process, i dropped my phone, and caught it b the cable, so it got disconnected, and it gave me an error message...the screen then froze so I tried a soft reset, and it got stuck on the T-Mobile screen....I waited a long time, than did a Hard Reset, and it is still stuck on the T-Mobile screen....I can't even wake up tomorrow cause I use my phone as my alarm clock...but I have no clue what to do...can anyone help?
"run the official RUU FROM HTC" I don't really know what this means, ..but I think I need to be connected to the computer to do that, and my phone is not even doing that...
thanks for ur help....
LnrdToxic said:
hey, im a newbie, and I need help...
I was trying to install TouchIT so I downloaded the applications needed from a zip file I found here on the website...
I installed ASerg Policies, Cert_spcs, and Enablerapi and did a soft reset...cause I thought I needed all that....
...than I tried to run "1__UPGRADE_ROM" and in the middle of that process, i dropped my phone, and caught it b the cable, so it got disconnected, and it gave me an error message...the screen then froze so I tried a soft reset, and it got stuck on the T-Mobile screen....I waited a long time, than did a Hard Reset, and it is still stuck on the T-Mobile screen....I can't even wake up tomorrow cause I use my phone as my alarm clock...but I have no clue what to do...can anyone help?
"run the official RUU FROM HTC" I don't really know what this means, ..but I think I need to be connected to the computer to do that, and my phone is not even doing that...
thanks for ur help....
Click to expand...
Click to collapse
Hold down the CAMERA button while you press the reset key hole. You will enter the boot loader. Make sure you are plugged into your PC and you see the word USB at the bottom of your phone's screen. Then download and run the Tmobile RUU. There's a walkthrough written by me called the "official how to unbrick" blah blah, just search for it.
Thank you very much, im trying it right now...
Sorry for cross posting, I was desperate!
sorry for the caps.
btw hello everyone
well lets just get to my problem.
i installed the touch it program rom thingy or whatever to my phone
and now im trying to restore it back to its original settings...
the only reason im doing that is because i cant connect the phone to the usb anymore. it WONT connect.
so im trying to restore it.
please help!
thanks!
or can someone just tell me how to reconnect it to my computer please?
i've tried different ports on the computer
and restarted it
but nothing, so please help me restore to factory settings or be able to use windows mobile device center
thanks!
maybe activesync didn't install properly when you flashed it..
or.. you should try the activesync uninstall/reinstall trick..
or a corrupt system file and you just have to hard reset the phone..
hmm..... good question
hard reset is when you press the clear storage right? or when u take out the battery while its still running??
well even if those arent hard resets i've tried them and none work
=[
A hard reset is preformed as follows:
-Hold down the two softkeys on the front of the device (the ones above the Windows logo and the OK button)
-Press the reset button using the stylus, which you can find below the volume adjuster on the left hand side of the device
-Release the stylus, but keep the softkeys held down
-You will see a warning screen
-Press the green send key on the left - the one with the phone icon on it to confirm the reset.
After that it will take a little while longer to start up the phone.
Btw if you by "original settings" mean restoring your official ROM a hard reset won´t do. You will need to flash the official ROM to go back if I´m not mistaken.
thanks for the info!
hey again
well im trying to restore the original rom but everytime i do it wont go past 1%
then touchit starts up.
help me please! i dont want touchit on my phone anymore
goodtilltomorrow said:
hey again
well im trying to restore the original rom but everytime i do it wont go past 1%
then touchit starts up.
help me please! i dont want touchit on my phone anymore
Click to expand...
Click to collapse
Did you hardSPL? What SPL / IPL version is shown on the multicolor screen?
knrubar said:
Did you hardSPL? What SPL / IPL version is shown on the multicolor screen?
Click to expand...
Click to collapse
Are you just trying to go back to the stock ROM becasue of the AS problem? Did you try a reinstall? After you uninstall before reinstalling AS go into your program files on the PC and delete the activesync folder.
If you HARDSPL'ed you need a STOCK ROM without the nbh. file. Thats why its kicking back to TOUCH.
Good Luck
Hello every one,
This is my first post at this site but I am a regular visitor and getting help with my windows phones. I am having problem with my HTC mega. It start up normally, shows HTC logo and system information but when it go to windows screen it restarts and the cycle continues till I pull out battery. I have tried lots of stock roms including operetor speific (T-mobile, Orange etc) but no results. I cannot hardspl my phone as it does not go to windows and the jockey's hard spl required active sync or windows mobile data centre connection. Please help me out with the problem. Thanks and regards, Danish
You have to hard reset your phone, but you'll loose all your datas. To do it: turn on the phone and keep pressed volum up+down+end call.
psgarsenal said:
You have to hard reset your phone, but you'll loose all your datas. To do it: turn on the phone and keep pressed volum up+down+end call.
Click to expand...
Click to collapse
Thanks for the reply. I have had it hard reset many times but it doesn't work. Just a while back I had tried with inserting a custom OS and hardspl file in a stock ROM, which i did but phone refused to flash with the nbh file i created. For stock roms it flashes every time with whatever rom i try to flash withbut then again gets restarted at windows screen.
Then I cannot help you, sorry :/
psgarsenal said:
Then I cannot help you, sorry :/
Click to expand...
Click to collapse
Looking for expert opinion for my problem. Any one, please. regards,
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
So if somebody can help me i would be very pleased
Ps. And sorry my bad english, i just a finnish.
Edit: I try reinstall, i post is changes comes.
E: No changes, still not working.
EDIT!!!!
SO if someone can help me, place do it
E.
And this just happend, phone just stop working whit black screen.was have to took battery off, and then it took about 10-30min to boot to win again.
THIS IS PRIMARY PROPLEM.
AAAAND now it wont even start. stuck in "smart mobility"...
Please read post's for more information.
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Could I solve this proplem if i unlock and install custom rom? just wondering if that would help?!
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
chan.sk said:
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
Click to expand...
Click to collapse
I have tried hard reset, but that didn't work, and tried to put original rom too, and nothing happened. I have 2 original roms
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
but those didint work. i will try today againe. and then if it going to work i will put that haret to start menu.
I'll try that 1.14 first...
flashed that 1.4 rom and waited about an hour and nothing happend... i jsut did hard reset and wait againe if it gonna boot now...
i was thinking that should i put custom rom, coz if something went wrong whit the official?
I mean if there is something wrong in phones hard drive? like something wrong whit registery or something?
something that wont let win start. if there is, how i can fix that?
masentava said:
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
Click to expand...
Click to collapse
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
chan.sk said:
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
Click to expand...
Click to collapse
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
masentava said:
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Click to expand...
Click to collapse
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
(800) stedntf
chan.sk said:
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
Click to expand...
Click to collapse
I have
This
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
And this.
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
Blackstone/HD Links | Guides | Stickies | Roms | Read before posting
http://forum.xda-developers.com/showthread.php?t=999925
U have to install HTC USB Sync Drivers drivers
Put the phone into bootloader by pressing volume down + power button
plug the usb cable to the computer/laptop
and then run the shipped rom executable file... when the tricolor screen displays USB at the bottom.
else extract the RUU_signed.nbh or any file with .nbh extension from the shipped file with zip viewers like 7-zip
rename the file to BLACIMG.nbh
Put into the root of memory card
put the phone into bootloader and follow the screen instructions..
And the most important thing... search the forum.. before posting..
Hope this works for you
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Hi all,
You can try a NAND ROM like the new release of Fagyi. There is an easy step by step manual to installation. You will lose winmo, but you will have a real android.
It looks pretty and he has solved many of the issues of previous versions.
Regards
CristianCRS said:
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Click to expand...
Click to collapse
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Do a Search and read the posts
masentava said:
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Click to expand...
Click to collapse
You need to understand what you are going to do or you may end up with a phone that does not work anymore.
Do a search of the forum and read the posts. There are so many.
http://forum.xda-developers.com/sitesearch.php?q=unlock blackstone