Related
Although the left-hand green led flashes, I'm not sure that WiFi is activating. I haven't been able to see any wireless networks, including my own when I was 2-3 feet from the router and WinCE still says it can't find the device and prompts me to turn it on. Has anyone else had this experience?
losborn said:
Although the left-hand green led flashes, I'm not sure that WiFi is activating. I haven't been able to see any wireless networks, including my own when I was 2-3 feet from the router and WinCE still says it can't find the device and prompts me to turn it on. Has anyone else had this experience?
Click to expand...
Click to collapse
You could try these:
This one just to see any networks around:
http://wififofum.en.softonic.com/ie/33768
and this one that does a few things in the connection process to save you finding where to put in some of the settings:
You need .net framework as well to use this but there's a link on the page for it as well:
http://www.kasuei.com/hitchhiker/
Regarding Win CE? Need more info.
Mike
normally i do so by going to the wireless adapter inside the network adapters control panel item. wish i can shortcut it
I have wifi in the house and it shows it at first as available and then flips to unavailable when in fact it is available since my laptop is wirelessly connected. it just keeps scanning and will connect to unsecured wireless routers around my area but will not connect to mine
Any insight as to how I could permanently have it connect to mine...It keeps saying scannig network and cycles from available to not available
similar activity
I have wifi at the office and at home. We use LEAP at work and I have WEP at home for security. the office wifi works pretty well. At home, I get kicked on and off about every minute or so. I haven't figured this out yet.
mikechannon said:
You could try these:
This one just to see any networks around:
http://wififofum.en.softonic.com/ie/33768
and this one that does a few things in the connection process to save you finding where to put in some of the settings:
You need .net framework as well to use this but there's a link on the page for it as well:
http://www.kasuei.com/hitchhiker/
Regarding Win CE? Need more info.
Mike
Click to expand...
Click to collapse
Mike,
WiFiFofum shows no activity when I run it.
Re: PocketWinC, I got the name wrong previously. More information about it can be found here: http://www.geekzone.co.nz/content.asp?contentid=3086 It makes it a lot easier to find wireless networks and connect to them. (legitimately! I'm not speaking of War Driving.)
When I run it, (I've used it successfully with other PPCs) I get the error message: "Unable to locate adaptor. If it was turned off, please turn it on now."
losborn said:
Mike,
WiFiFofum shows no activity when I run it.
Re: PocketWinC, I got the name wrong previously. More information about it can be found here: http://www.geekzone.co.nz/content.asp?contentid=3086 It makes it a lot easier to find wireless networks and connect to them. (legitimately! I'm not speaking of War Driving.)
When I run it, (I've used it successfully with other PPCs) I get the error message: "Unable to locate adaptor. If it was turned off, please turn it on now."
Click to expand...
Click to collapse
Well I think your right Wifi may be showing green LED but like you say it does not sound like it's activating. Have you tried a hard reset? If taht does not work then sounds as if you have a hardware problem.
That Pocketwinc looks interesting - similar to Hitchhiker by the looks of it.
Mike
8525 (Hermes TyTn)server assigned ip address frozen
Following an abortive attempt to connect to the (secure?) wlan at the local University , I now have an address "fe80::209:2dff:fee" locked into place in the field for "use server-assigned IP address" in the WiFi network adapter settings page. Consequently I can now connect to nothing with WiFI ( which had been working perfectly.) I would like to avoid a hard-reset - not even knowing if that will work. TIA
blane64 said:
I have wifi at the office and at home. We use LEAP at work and I have WEP at home for security. the office wifi works pretty well. At home, I get kicked on and off about every minute or so. I haven't figured this out yet.
Click to expand...
Click to collapse
Hi there!
today I finally understood why I'm having a similar issue like kicking off the network every minute. I managed to remotely restart the wireless router via _re_connecting my TyTN to the wireless network. It works as follows:
1. The WLAN router is working normally.
2. I turn on the WLAN on TyTN and it gets connected to the network. Everything works fine.
3. I press the power button to put TyTN in stand-by mode.
4. I press the power button to turn TyTN on. It tries to reconnect.
5. The router restarts.
At home I have a similar issue with a different router. It seems to restart on reconnection.
Why is this so? Is this a bug in TyTN or in router's firmware? Can it be corrected somehow?
The router is a DLINK DI-824VUP+ with, I guess, the most recent firmware.
The phone is original HTC TyTN with:
ROM 1.18.255.3
Radio 1.03.03.10
Protocol 32.34.7010.01H
ExtROM 1.18.256.9660
Egils
Hi everyone.
First off, I know there are a million and one other threads.. believe me.. I have searched!
Basically my phone won't connect to my network. It was working fine earlier today. I've tried changing all the security settings in my router (turning off encryption for example). I've tried soft resetting and hard resetting the phone.
Nothing seems to be working. It finds the network fine, but it just says 'Connecting' then goes to 'Available' but it won't use the wifi connection.
Any ideas?
Thanks!
Have you tried connecting your device using a friends wifi router to see if this connect you
Nope. I forgot to add that I will try connecting to work's WiFi tomorrow!
Anything to try in the mean time?
Try these:
1) disable frame bursting
2) disable big packets and other methods of wifi speeding
3) force 11b
4) use WPA-PSK TKIP only
5) check if you have MAC or other access filtering
than let us know
miland said:
Try these:
1) disable frame bursting
2) disable big packets and other methods of wifi speeding
3) force 11b
4) use WPA-PSK TKIP only
5) check if you have MAC or other access filtering
than let us know
Click to expand...
Click to collapse
1) Can't see any settings under my router.
2) Tried disabling gnitro (Belkin router), no difference.
3) No difference
4) Already on that.
5) Turned off.
It's so odd. Works fine with an N95.
I don't think it's anything to do with my router because like I said it worked fine earlier on in the day then suddenly stopped. The router settings hadn't changed.
Edit: I've tried turning the router security off altogether also. I really don't feel it's an issue with my router.
Tested the phone at work. It works fine.. so I don't have a clue why it's not working at home? Surely the router can't be incompatible with the phone.. especially considering it worked at one point.
Very weird! I got fed up with my router so decided to restore the factory defaults and start from scratch.. worked straight away! So I restored the settings back to exactly how they were before (using a backup file I made).. and it worked!
Just posting incase it happens to anyone else anyway.
AltF4me said:
Very weird! I got fed up with my router so decided to restore the factory defaults and start from scratch.. worked straight away! So I restored the settings back to exactly how they were before (using a backup file I made).. and it worked!
Just posting incase it happens to anyone else anyway.
Click to expand...
Click to collapse
Maybe uve tried this already but could be the fact that your home internet access point is listed as Work rather than internet, used to have an issue with mine cause of that.
I also have this problem.
Reset did not help.
Listed as internet or work did not help in both cases.
Real weird!!
I've got the same problem, all of a sudden my hd won't connect to my router.
I can connect to open networks (wi-fi hotspots etc) so i know the wifi in the phone is working ok and my partners diamond can connect ok to my router, so the router is obviously ok.
Have reset the router as well and haven't changed any settings on the phone.
Don't understand!!!!
as other users point out within other threads, it seems that Blackstone has a problem connecting to wifi networks when WPA Authentification is enabled
try to disable it. it worked for me and soem other guys
good luck!
I could connect to my router fine using my laptop.. but I still had to reset my router to the factory settings before it worked again on my Touch HD.. then I could enable WPA and everything back again. So try that!
i thought i had a similiar problem, mine wouldnt connect to wifi, kept switching itself off. figured this is normal when its connected to usb. unplug usb and it turns back on!
I own an HTC Touch HD since January and have a similar problem, only it surfaced last week. Before I had only used the WiFi connectivity briefly. The problems started after I installed an AP on my house expressively for the new PDA. The node is fully open and set to B/G/N protocols.
After a couple days of medium (couple hours per day) use the WiFi connection suddenly quit, the device would try to connect (the top bar showing the WiFi connection animation continuously) and after a few moments gave up with a dialog box stating the current network settings were wrong (even thou they worked fine a few hours earlier).
I tried several hot and cold resets, but only solved the problem after flashing a new ROM; even then the same symptoms reappeared after a couple of days of regular use. Again no re-setting would cure the problem, and now not even flashing the ROM again would work. Nonetheless, some hours latter the WiFi would connect perfectly with the same nodes it refused to before, and in very short time.
I have witnessed this cycle twice and have yet not been able to find a trigger for it, but will keep my eyes open for any tell tale signs, and post any findings here.
Hi
I used to have problem using any secure wireless connection. Then I realized that you need a personal certificate to use secure wireless networks. It uses certificate to encrypt connection between access point. I have access to a windows certificate server so I created a personal certificate with private key and import it to my mobile. Now I can login to any secure wireless network.
A solution has been posted for data connection problems. Can be found here
This may help, may not. Let me know
Fallen Spartan said:
A solution has been posted for data connection problems. Can be found here
This may help, may not. Let me know
Click to expand...
Click to collapse
That solution doesn't seem to work for this problem.
Resetting the router does seem to work.
I don't get why resetting the router works.... other devices can still connect no problems before resetting, so it only seems to be aproblem with the hd.
It also sux when you are using a public router with this problem that you can't reset.
Connecting to Belkin router
Guys, I had the same problem as well. HTC touch HD used to connect to the router fine but after installing an update/upgrade it would pick the signal from the router but would not connect. (I was using WEP authentication at this time)
SOLUTION:
Go to belkin router configuration on the web.
Under security change the Securtiy Mode to WPA/WPA2-Personal(PSK)
Change authentication to WPA-PSK
Select Encryption to TKIP and enter your password.
GO to your HTC touch HD's WiFi setting and turn Wifi ON. Select your home network SSID and edit it using the information you used on the router i.e. WPA-PSK ; TKIP, enter your key/password and click next, next and finish.
Worked for me....hope it helps.
WIFI not connecting
That truly is extremly nasty.
I have the same issue - wifi found, correct password (WEP, WPA all settings) but no successful connection.
Took an old HTC 3xxx - runs immediately.
I can not reset the router - there are too many users, they will kill me then.
So I installed an Access point (Sparklan WX 7800A) to play with.
Notebooks (HP, MSI and ASUS) have successful internet access, also the old HTC 3xxx.
But still the HTC HD does not connect.
Tried "WIFI Monster" - shows the wifi, but does not connect.
(But it deletes all wifi entries easily - so you can set them up new)
Tried with NO security/password: same issue.
WEP, WPA (all kinds): no connection
There must be something to be changed in the registry - but I have no idea what & where.
Or is the wifi that useless ?????
Maybe someone can help
Ciao
Mike
I had the same problem. But the problem stopped when i connect my htc HD to my laptop and used activesync to connect to internet. After i disconnected it, open wifi and... works ok!!
Xda-viewers,
yesterday i tried to put on my WiFi, but it didn't work anymore
I have my HD2 for about 1month, very happy with the phone,
and this is the first mayor malfunction
When i press WiFi ON in the comm-manager it shows it's loading,
and then nothing, doesn't go ON,
turned the phone off-on, soft reset.. nothing..
anyone else had this glitch?
hard reset or other solution?
It always worked, untill yesterday
If I were you I would go for a full backup with SPB, and then restore (maybe excluding everything regarding the wifi) after a hard reset
I would try doing hard reset.
However, I had the same problem with my old Fujitsu Siemens Pocket Loox N560 and they had to exchange mainboard.
Do you have it charging? I can't seem to connect to any Wifi networks when I have the phone plugged in. Once i disconnect it, it works fine.
If you are connecting it using USB, make sure WMDC / ActiveSync is set to allowing your phone wireless connections while connected to your PC!
???
phone is fully charged
not connected to PC or anything
not working, going to try some things
anyone goto suggestions except hard reset?
else i hard reset tommorow,
thankz
You mean you can't turn ON or NOT CONNECTING?
If its not connecting, did you try to delete the connection settings from advanced wireless settings and try reconnecting again?
skr_xd said:
You mean you can't turn ON or NOT CONNECTING?
If its not connecting, did you try to delete the connection settings from advanced wireless settings and try reconnecting again?
Click to expand...
Click to collapse
It's really not turning ON.
I press the Off-On button, I see it loading and then, nothing,
WiFi is still turned OFF.
timodc said:
It's really not turning ON.
I press the Off-On button, I see it loading and then, nothing,
WiFi is still turned OFF.
Click to expand...
Click to collapse
I've got exactly the same problem - have only noticed it today.
If I go into wireless network config and select my network there and click connect, it takes ages before it says "connected" and then immediately changes to "not connected". I've obviously checked and rechecked my settings. It simply will not connect any more.
i also can't remember installing an update which would cause this probleme..
Connected to PC
When connected to PC, in the comm manager, the WLAN is dissabled, can't even push it, maybe something went wrong with disconnecting and this is the reason why my WiFi is not working - going on?
Anyone?
I'm not at home, so can't do anything with mine at the moment, but out of curiosity, did you use then Wifi N option in BsB Tweaks? That's the only thing Wifi related that I can think of touching recently.
Tried it
Indeed, thought the same,
tried to put Wifi-N off, soft-reset, but no change
Almost at the edge of HARD-reset
timodc said:
Indeed, thought the same,
tried to put Wifi-N off, soft-reset, but no change
Almost at the edge of HARD-reset
Click to expand...
Click to collapse
I really hope it doesn't need a hard reset. I'm not gonna be happy if I have to do that AGAIN!
I'm gonna keep searching, in the hope of finding a solution.
Out of curiosity, do you ever use the Wifi router app?
WM-Wifirouter
I tried to use the Wlan-Router with Comm manager,
didn't work that well,
installed app I had on my P3600: WM-Wifirouter,
this worked like a charm,
Timo
I've solved my problem! Yay!!
I don't know if this will be of any help to you, but give it a try and see how you get on.
Basically, when using the in-built wifi router, it assigned the IP address 192.168.1.1 to the wireless adapter. This is fair enough, for a router, but obviously not for when you want to connect to a wifi network and get assigned an IP address automatically.
I had seen other people suggest that this may be the problem, so I'd already checked my IP settings for the wireless adapter, and they were set to automatic.
However, if you run the wifi router and then go to your IP settings, it says 192.168.1.1. Set it to automatic while the router is running.
This made my phone get a bit upset, and I ended up reseting it, but since then I've been able to connect to my home network again.
So...
1. Run and start the wifi router
2. Go to settings, Connections, Wifi, Wireless networks, Network Adapters (tab)
3. Select the network adapter (Broadcom 802.11 DHD Network Adapter)
4. Change to use a server-assigned IP address, instead of a specific one
5. Click OK
6. Reset the phone - don't close the wifi router app first.
7. When it starts up, go to the comm mananger and disable wifi.
You should now be able to start wifi and connect to your home network. (It may do it automatically if you don't do step 7 - I'm not sure).
Give it a try and let us know how you get on
Sensational johncmolyneux!!!
I had this problem too - it was doing my head in, but now seems like an obvious conflict. Thanks for finding the solution.
Now all I need to do is solve my BT Voice Commander problem (reported in many other threads) and the HD2 will have the same functionality as the Hermes it has replaced ;-)
Cheers,
Lordbowl
You still haven't hard reset?! I am doing hard reset every 6days because of mod/theme and other crap testing
Backups with resco/pim/office2007 entreprise on windows 7 beta do the trick to have phone working in 15 minuts.
johncmolyneux said:
I've solved my problem! Yay!!
I don't know if this will be of any help to you, but give it a try and see how you get on.
Basically, when using the in-built wifi router, it assigned the IP address 192.168.1.1 to the wireless adapter. This is fair enough, for a router, but obviously not for when you want to connect to a wifi network and get assigned an IP address automatically.
I had seen other people suggest that this may be the problem, so I'd already checked my IP settings for the wireless adapter, and they were set to automatic.
However, if you run the wifi router and then go to your IP settings, it says 192.168.1.1. Set it to automatic while the router is running.
This made my phone get a bit upset, and I ended up reseting it, but since then I've been able to connect to my home network again.
So...
1. Run and start the wifi router
2. Go to settings, Connections, Wifi, Wireless networks, Network Adapters (tab)
3. Select the network adapter (Broadcom 802.11 DHD Network Adapter)
4. Change to use a server-assigned IP address, instead of a specific one
5. Click OK
6. Reset the phone - don't close the wifi router app first.
7. When it starts up, go to the comm mananger and disable wifi.
You should now be able to start wifi and connect to your home network. (It may do it automatically if you don't do step 7 - I'm not sure).
Give it a try and let us know how you get on
Click to expand...
Click to collapse
-When I try to connect the WLAN-Router with the Comm Manager, it keeps on loading and nothing happens.
-When I try the WM-Wifi-Router app which I used on my P3600, it says not abble to connect WLAN
-All my settings are server-assigned-IP-address
Still not able to put on my WLAN,
Timo
Hi folks,
Upgraded to v.1.66 a while back (I'm on Voda UK) and can no longer connect to my Wi-Fi network. Done reset to factory defaults twice. Immediately after reset and during initial setup HD2 will successfully connect to Wi-Fi but that's about it. Any other attempt to connect will fail.
Wi-Fi is available (2-4 bars depending what part of the house I'm in).
Overall, every time I tap on the wi-fi it will look like HD2 is trying to connect but with no result whatsoever. Like trying and dropping straight away.
Tried with no seeming result:
- setting static IP on DHD Broadcom adapter
- changing Data Encryption (AES to TKIP and back)
Wi-Fi worked b4 the upgrade to 1.66 (from 1.43). Didn't have to change any of those settings above.
Logs on Wi-Fi router won't register any attempts to connect. My pure guess is that signal/connection/whatever drops b4 any IP address will assign.
I know that not a lot of information but that's what I have gathered so far.
Ideas? Thanks.
look at all other adapters and set them to dhcp... no problems with wifi on 1.66. make sure your router is configured to allow new wifi connections...
Replaced router today. Seem to have sorted the issue. Will keep my eye on it.
I sent my note 3 (sim free n9005) to repair one month ago because a sensor didn't work (another story). Now the sensor problem has been fixed. But there is another issue. The wifi keeps dropping. I mean wifi is completely turned off on my phone, then it tries to turn on, and off again... I have googled a while,it's not the wifi is slow, it's the wifi is completely turned off then it tries to turn it on, and keeps turning on and off. At first it happens occasionally and it can be turned on. Until several days ago, wifi could not be turned on at all. If I go into setting - connection - wifi, I will see it says 'turning on' but nothing happens. Reboot helps sometimes but the issue soon reappear. I did factory reset but no use. I would think it's the phone's problem. But When I go outside and test in public wifi (university wifi, MacDonald etc), it got no problem at all. So I began to think maybe there is something with the router. So I turned off my router, the wifi is turned on immediately and I can see all the wifi connections from my neighbours.
My router is virgin media netgear vmdg485 (100M fiber optical). I googled it, it seems specially made for Virgin media. It's a modem/router all-in-one device. Just wondering has anyone else got similar experience? B.T.W all other devices in my home connect to the wifi no problem at all. I think they may have upgraded my android software on the repair. I never had this problem before the repair. But android is the latest version (checked in settings). So I don't know what option I have on software side. Probably I need to try a new router?
And also I have tried everything I found on Internet (turn off switch network etc in advanced setting in wifi. turn off power saving for wifi, disable wifi direct/share, etc).
thotwielder said:
I sent my note 3 (sim free n9005) to repair one month ago because a sensor didn't work (another story). Now the sensor problem has been fixed. But there is another issue. The wifi keeps dropping. I mean wifi is completely turned off on my phone, then it tries to turn on, and off again... I have googled a while,it's not the wifi is slow, it's the wifi is completely turned off then it tries to turn it on, and keeps turning on and off. At first it happens occasionally and it can be turned on. Until several days ago, wifi could not be turned on at all. If I go into setting - connection - wifi, I will see it says 'turning on' but nothing happens. Reboot helps sometimes but the issue soon reappear. I did factory reset but no use. I would think it's the phone's problem. But When I go outside and test in public wifi (university wifi, MacDonald etc), it got no problem at all. So I began to think maybe there is something with the router. So I turned off my router, the wifi is turned on immediately and I can see all the wifi connections from my neighbours.
My router is virgin media netgear vmdg485 (100M fiber optical). I googled it, it seems specially made for Virgin media. It's a modem/router all-in-one device. Just wondering has anyone else got similar experience? B.T.W all other devices in my home connect to the wifi no problem at all. I think they may have upgraded my android software on the repair. I never had this problem before the repair. But android is the latest version (checked in settings). So I don't know what option I have on software side. Probably I need to try a new router?
And also I have tried everything I found on Internet (turn off switch network etc in advanced setting in wifi. turn off power saving for wifi, disable wifi direct/share, etc).
Click to expand...
Click to collapse
Hi,
I had a similar problem with my note and was advised to go into the wifi settings and deactivate "Scanning always available" and "Auto network switch".
I had this problem with a Virgin media router and where android was under the impression the connection was unstable it was deactivating the wifi to go back to the cellular.
This may be completely wrong but it solved it for me.
Hope this helps!
I had this issue and the only thing that solved it was a factory reset.
I had a similar problem with my Note 3 (SM-N9005) and Virgin Superhub 1
I hadn't previously noticed problems with wi fi at home when using different phones in the same location.
After much reading on support forum I concluded that many Superhub users believe the device is not very effective when operating as both a cable modem + wi fi router.
I opted for an expensive solution of buying a new wi fi router.
My Superhub now operates just as a cable modem and is connected via ethernet cable to the adjacent Asus RT-AC66U which does have the advantage of 802.11 ac.
Speed test result from Note 3 via wi fi setup described above.
http://www.speedtest.net/my-result/a/822449802
Sent from my SM-N9005 using XDA Free mobile app
Thanks paul, mine is super hub as well. I want to get a router to test, but worring if it doesn't solve the issue.
wow, that router is a lot of money, really hope it's not the router issue.