Before when i have a program opened and i pressed the power button on and off, normally the program would stay on the screen, but now when i do it it goes to the today screen. is there a way to get it to the way it was before??
Are you using Battery Status?
There is a checkbox in the setup menus: On the Tools tab, look for "Show Today-Screen on WakeUp"
If it's not that, I don't know.
qwkynuf
yea, it was battery status. that solved my problem. thanks alot!
No problem, it got me too...
Related
I'm running Black 3.01, and the only way I can bring the device out of STANDY is with the power button. My KeyLock is set to "Lock buttons if device is locked." The device is NOT locked, just in standby, and the only button that can get it to wake up is a quick-push of the Power-Button.
I thought there was an app that said you could push ANY button to bring it out, but I can't find that on WM6 Black 3.01.
Thanks!
I asked this same question long ago with no real answer, i hate the small power button and its just to hard to find... If the power button could be relocated to the PTT that would make this phone awesome...
mitchg said:
I'm running Black 3.01, and the only way I can bring the device out of STANDY is with the power button. My KeyLock is set to "Lock buttons if device is locked." The device is NOT locked, just in standby, and the only button that can get it to wake up is a quick-push of the Power-Button.
I thought there was an app that said you could push ANY button to bring it out, but I can't find that on WM6 Black 3.01.
Thanks!
Click to expand...
Click to collapse
Start>Settings>System>Key Lock
Select "Do not lock buttons"
Hello.
My solution to this problem is to use MortSaver. It can be configured:
one press on (a specified) button sends the phone to standby
two presses on (a specified) button bring the phone back
one press on (a specified) button show the time, missed calls, mms/sms, battery and phone signal
I've assigned it to the upper right (Internet Explorer) button and it does the job well.
Best regards!
jZ
Not sure if this helps, but a friend of mine broke his power button, and now wakes his device up by ejecting and re-inseting his memory card.
Downloaded and installed the Shut Down Cab on my Wing. The three options are:
1. Light Off
2. Shut Down (Does not Power Off, only turns off screen?)
3. Soft Reset
My question is: Should Shut Down turn the Power Off? If not, what is the purpose of this compare to Light Off?
Thanks
Press any key if you press Lights off. You'll see that your phone is still on but just with the lights off.
Shutdown is like when you press your power button on the top.
Soft reset, well... speaks for itself.
ElProempie said:
Press any key if you press Lights off. You'll see that your phone is still on but just with the lights off.
Shutdown is like when you press your power button on the top.
Soft reset, well... speaks for itself.
Click to expand...
Click to collapse
Thank you. Apparently Shutdown and Lights off do the same thing for me as I can touch any key after using either one and the phone works as if it were Lights off.
Maybe I don't see the purpose of them as being separate functions.
Check "keyboard lock" (more or less.. my wing rom is in spanish) under configuration - system and make sure it's set to "block all buttons except power button" if not, every button will power on your device after shutdown, making it look like turning the lights on.
Hope works for you.
le_hades said:
Check "keyboard lock" (more or less.. my wing rom is in spanish) under configuration - system and make sure it's set to "block all buttons except power button" if not, every button will power on your device after shutdown, making it look like turning the lights on.
Hope works for you.
Click to expand...
Click to collapse
Yes, that is correct. That is why I said that both options are doing the same thing. I would have thought that one would Power Off.
Again, thank you for your input. I do appreciate it.
Hello all,
I am new to the forums but I have been using the HTC Touch for a few months now, and would like some guidance about a few problems i'm having. First off, I am using the official 6.1 rom with sprint....
I am running S2U2 and am having a problem with my phone turning off while in my pocket. It seems the power off menu can be brought up if you hold the power button, even if S2U2 is running. This is very frustrating, is there anyway to lock the power button when S2U2 is running, or any other option?
Is there any edits that can be done to make S2U2 call the factory device lock? I couldnt find anything related to the lock in the registry. If there is, is there anyway to assign the factory device lock to the power button, so that when you blank the screen it auto-locks? I love this feature with s2u2, and with stock device lock it takes 3 buttons to do this...
Thanks!
honduh said:
Hello all,
I am new to the forums but I have been using the HTC Touch for a few months now, and would like some guidance about a few problems i'm having. First off, I am using the official 6.1 rom with sprint....
I am running S2U2 and am having a problem with my phone turning off while in my pocket. It seems the power off menu can be brought up if you hold the power button, even if S2U2 is running. This is very frustrating, is there anyway to lock the power button when S2U2 is running, or any other option?
Is there any edits that can be done to make S2U2 call the factory device lock? I couldnt find anything related to the lock in the registry. If there is, is there anyway to assign the factory device lock to the power button, so that when you blank the screen it auto-locks? I love this feature with s2u2, and with stock device lock it takes 3 buttons to do this...
Thanks!
Click to expand...
Click to collapse
The only thing that I could suggest that might help is to get yourself a good case for your phone that would protect the button from being accidentally pushed. I have never had this problem with my phone. The button actually has to be pressed and held to bring up the power off menu. Even when not in it's case, I have never had this happen; however, the phone is only out of it's case, when I am using it. In the case, there is even less chance of powering off the device.
Rod.
The default device lock works just like S2U2, as it leaves only the power button unlocked. If you locked all buttons, how would you turn your phone back on??
TheChampJT said:
The default device lock works just like S2U2, as it leaves only the power button unlocked. If you locked all buttons, how would you turn your phone back on??
Click to expand...
Click to collapse
The problem i'm having is that the phone actually powers off while in my pocket somehow....what i'm saying is that the phone not only "wakes up" from the standby mode, but also calls the shut down window and you can press the "yes its ok to shut down" button while s2u2 is running, something the stock device lock will not do.
It would be really nice if there was a slide type lock that was based off the code of the stock device lock.
Thanks for the replys
Find what the application is that launches when pressing the button and add it to the S2U exclusions list.
I have a verizon and my power button toggles screen off and on, so im not entirely sure, Is this a stock popup or a program you installed ? There is probably a registry entry somewhere that defines how the power button functions jsut as the button manager does for other buttons.
honduh said:
The problem i'm having is that the phone actually powers off while in my pocket somehow....what i'm saying is that the phone not only "wakes up" from the standby mode, but also calls the shut down window and you can press the "yes its ok to shut down" button while s2u2 is running, something the stock device lock will not do.
It would be really nice if there was a slide type lock that was based off the code of the stock device lock.
Thanks for the replys
Click to expand...
Click to collapse
I understand your point, and am still wondering what it is you keep in your pocket with your phone that shuts it off!? Anyways, why do you keep referring back to the default device lock? S2U2 performs the same way, as it locks everything besides the power button. If the power button is locked, how would you wake up the device to unlock it ???
the power button has two functions, it blanks the screen if you press it, or it brings up the power off menu when you long press it. The problem i'm having is s2u2 doesnt prevent the power off menu from coming up, where as the stock device lock does. Thus, it is possible to completely power off the phone while the keys are locked.... of course I want to be able to wake the phone up with the power button, but i dont want to be able to turn it completely off.
And i'm not sure how it turns off in my pocket, except i usually carry it with the power button face down (phone upside down) and it must press against the bottom of my pocket...
The application that it is calling is the stock shut down menu, i'm not sure how I could add this to the exception list, as I dont know how to call it remotely....
Thanks again for the replies!
The title of this caught my attention.
It would be very nice to have a registry edit that will lock the device when powered off or on device wake up.
I use S2U2 and I am really not liking it personally, but it is better then the default setup currently I feel.
Hi,
I've read on here that you can do a soft reset without taking cover off and pressing the actual reset button, but I can't find it again. I've looked on hints and tips, wiki, and searched. Can anyone help please?
Cheers
You'll be needing the TouchX Reset & Wifi shortcuts then
You can get them off this post...
http://forum.xda-developers.com/showpost.php?p=4947950&postcount=1
It creates 2 shortcuts in your start menu. 1 for resetting, and 1 for toggling wifi. You can then add to your quicklinks, if you so wish.
Hope this helps
You could always switch off + switch on but johncmolyneux suggested works as well, although I used a cab so as when I push the switch off button, I get a new menu with various options, including soft reset.
Forgot which one it is though
Snerkler,
Some good suggestions here. Be aware that these will only work if the device is NOT in the grip of death, as I call it.
If it has died then there's no option but to take the back off and either press the little red button or take the battery out.
WB
The 'out of the box' method, without resorting to additional applications is to press and hold the Power key for 3 seconds.
This opens up a context menu which includes 'Power Off'. This is a full 'power off' state with all background processes stopped. Pressing the power button again restarts the phone as in a soft reset.
NeilM said:
The 'out of the box' method, without resorting to additional applications is to press and hold the Power key for 3 seconds.
This opens up a context menu which includes 'Power Off'. This is a full 'power off' state with all background processes stopped. Pressing the power button again restarts the phone as in a soft reset.
Click to expand...
Click to collapse
So turning the phone off and on again is a soft reset???? If that's the case why are there cabs for soft reset, seems a bit strange to me. Wish I'd known that before when installing some of the cabs and taking the back cover off to press the reset button
wacky.banana said:
Snerkler,
Some good suggestions here. Be aware that these will only work if the device is NOT in the grip of death, as I call it.
If it has died then there's no option but to take the back off and either press the little red button or take the battery out.
WB
Click to expand...
Click to collapse
I know what you mean about the "grip of death" lol. Been there already.
Turning the phone fully off then on again is the same as a soft reset. A simple on/off isn't.
If the device goes through the splash screens on restarting (as after the power button 'hold' switch off) that is a soft reset.
I use a stand alone program called psShutXP which is available on This Page - download the VGA version. It runs as a small Screen Off/Suspend/Power Off utility.
NeilM said:
Turning the phone fully off then on again is the same as a soft reset. A simple on/off isn't.
If the device goes through the splash screens on restarting (as after the power button 'hold' switch off) that is a soft reset.
I use a stand alone program called psShutXP which is available on This Page - download the VGA version. It runs as a small Screen Off/Suspend/Power Off utility.
Click to expand...
Click to collapse
I'm not sure what you mean by fully off, and simple on/off. Are you referring to power off, and sleep? In which case I was referring to power off, ie hold power button and then select power off
NeilM said:
Turning the phone fully off then on again is the same as a soft reset. A simple on/off isn't.
Click to expand...
Click to collapse
Sorry - could you explain that please? Is there a difference between turning the phone off, and "fully" off?? I assume you're not refering to simply switching off the display when you say a "simple on/off", as that's not off at all.
You've lost me there mate.
There are 3 or 4 suspend states- sorry, but I can't remember what all 4 are
There is 'screen off' which simply turns off the screen but keeps all currently active programs running. This is only available by using a 'Display Off' or 'Screen Off' switch such as the 'Toggle Screen' option in Media Player. WFi and GPS remain active in this state.
The next is 'Suspend' by pressing the power button. This turns off the screen and some functions such as WiFi and GPS and some media players also stop working but the phone remains responsive and timed notifications will still work.
Next is the 'full power off' I mentioned which you get by pressing and holding the power button. This turns off all functions, phone features and stops all notifications working.
That's what I was clumsily trying to say when I mentioned that a 'full power off' has the same effect as a soft reset- as opposed to a 'screen off' or 'suspend'.
[Edit: Having tried this a little more, it may be that the HD2 doesn't differentiate between states 1 and 2 ?. Due to the lack of hardware button configuration, Media Player's Screen Toggle can't be assigned to a button. psShutXP's Display Off button works, but on turning on again, the lock screen starts, which shouldn't happed with a simple display switch. ]
NeilM said:
There are 3 or 4 suspend states- sorry, but I can't remember what all 4 are
There is 'screen off' which simply turns off the screen but keeps all currently active programs running. This is only available by using a 'Display Off' or 'Screen Off' switch such as the 'Toggle Screen' option in Media Player. WFi and GPS remain active in this state.
The next is 'Suspend' by pressing the power button. This turns off the screen and some functions such as WiFi and GPS and some media players also stop working but the phone remains responsive and timed notifications will still work.
Next is the 'full power off' I mentioned which you get by pressing and holding the power button. This turns off all functions, phone features and stops all notifications working.
That's what I was clumsily trying to say when I mentioned that a 'full power off' has the same effect as a soft reset- as opposed to a 'screen off' or 'suspend'.
[Edit: Having tried this a little more, it may be that the HD2 doesn't differentiate between states 1 and 2 ?. Due to the lack of hardware button configuration, Media Player's Screen Toggle can't be assigned to a button. psShutXP's Display Off button works, but on turning on again, the lock screen starts, which shouldn't happed with a simple display switch. ]
Click to expand...
Click to collapse
OK, thanks for the explanation
i have a herald and installed tribshell and i like it so much.. but i think phone lock is alittle bit long. i mean i have to first hit start button, then left softkey (or lock icon on the screen). its locked. and to turn off screen,i hit power button..
its 3 hit for locking..
cant we decrease it to 1, only power button.. i mean hitting power button locks phone.. like S2U2.. is it possible??
anyone???????
I have a TouchPro2, and it worked much the same way. There is a program out there that allows for turning off the screen to automatically lock the phone. Works great for me. I'm not sure if it will work on your device, but I'll see if I can dig up the thread I found it in.
EDIT: Here's the thread here I got it:
http://forum.xda-developers.com/showthread.php?t=649695&highlight=lock
Again, this is for a TouchPro2, so I dunno if it'll work on your device, but it might be worth a try.
i will try it.. thnx