Hello. I have have a t-mobile mda with TNT4.0 Rom. I have set up t-mobile data connection as well as the proxy and internet works fine. However, if go into a no-reception area(subway, tunnel, etc) the data/voice obviously disconnects. When I'm in the clear again the voice bars show up but where I typically see E (EDGE) I see an "x" as if there is no data connection available. If I soft reset the data connection is there. Until I soft reset, there seems nothing I can do to fix the data connection. I go to connection settings, tap on the modem and click "connect" but nothing happens.
When I click "sync" in ActiveSync, it starts to sync and then stops after a few seconds and says "waiting for network".
Is anyone experiencing the same problem? any way to fix that? WHen I had T-Mobile ROM, I did not have this issue.
Sometimes things like that dissappear if you just flash the same ROM over the top of the one you're using. You don't list what radio rom your using, but it might be that too. You should probably start by flashing a new radio rom, either 2.19 or 2.69 since they seem to work the best with WM6 and then reflash TNT 4.0 if one of the radios doesn't fix it.
i had exactly the same problem (G/E sign visible..internet working but after a while X sign and i had to reset or turn the phone feature off and on to get it working again) when i was using other WM6 roms and it was so annoying that i planned to move back to WM5 but thanks to Orhan (he had the same problem) now its fixed.
for some strange reason, the only solution is to use NBD ROM and your problem will be solved. im using NBD 8.1 (without touch. after the ROM you can choose to install touch or soft reset it after setup to get a vanilla wm6 o/s) and its extremely fast and stable.
my gprs attach problem thread
http://forum.xda-developers.com/showthread.php?t=322022
NBD v8.2 (5.2.1437)
http://forum.xda-developers.com/showthread.php?t=319751
hope this helps.
xeno1 said:
Sometimes things like that dissappear if you just flash the same ROM over the top of the one you're using. You don't list what radio rom your using, but it might be that too. You should probably start by flashing a new radio rom, either 2.19 or 2.69 since they seem to work the best with WM6 and then reflash TNT 4.0 if one of the radios doesn't fix it.
Click to expand...
Click to collapse
Thanks. I had 2.47.11 Radio ROM and now have installed 2.19 per your suggestions. I'll test it out and will post the findings.
natan said:
Thanks. I had 2.47.11 Radio ROM and now have installed 2.19 per your suggestions. I'll test it out and will post the findings.
Click to expand...
Click to collapse
I've installed 2.19.11 radio ROM and so far I am not having any GPRS reconnecting problems as I did before. Thanks!
No problem, glad I could help.
Related
Ok this is some frustrating ****,
ive been installing roms and radio's all day long
and none seemed ti fix my problem. Now after installing The R8 and thena dutch rom. It worked fully my gps found sattelites from inside my room. My 3G was getting 3 bars. I thougt i made it happen. Then a message appeart, that my phone provider has been found and he starts configuring, after that he asks for a reset. But then BAM after the reset no gps signal.
This happens everytime after a rom installation. First resets seems to **** it up, whass up with this?
don't reset?
maybe try flashing original ROM to rule out problems with hardware?
did you flash the murato radio yet? my dutch polaris was ****ed up after the first radio flash. Murato fixed the issue.
hé it is the murato radio that i installed.
But its not working correctly after reboot.
Damn this is frustrating!
Maybe you could help me getting the original rom with original radio for orbit 2 uk. Don't care if it wm 6. Except for the german one going around cant seem to find the originals.
i think it is "connection setup" cause the problem.
after i flash 1.68radio and apllied"china connection setup",signal is not good
sorry for my poor english
hmm....i flashed yesterday swtos v0.96 and it's really great. i use the new radiorom and everything is better.
I'm having a typical problem with wifi. I can't turn on wifi radio under wm6.5. But no problem at all under wm61. I tried different rom but same result!
What do you think is it a driver issue or something else?
Appreciate your advice.
What ROM / RADIO / SPL combos are you using?
Digital Outcast said:
What ROM / RADIO / SPL combos are you using?
Click to expand...
Click to collapse
I'm using -
HSPL: 1.56 olinex
Radio: 1.14.24.25
Rom: different rom, wm65 build
Interestingly I just discovered that wifi turns on in dutty's wm65 build. but not on others.
any idea...?
tomal said:
I'm using -
HSPL: 1.56 olinex
Radio: 1.14.24.25
Rom: different rom, wm65 build
Interestingly I just discovered that wifi turns on in dutty's wm65 build. but not on others.
any idea...?
Click to expand...
Click to collapse
I have used Dutty's 6.5 ROMs and it works fine for me there as well. Have you tried Miri's and/or other 6.5 roms too? It also works fine there for me.
Digital Outcast said:
I have used Dutty's 6.5 ROMs and it works fine for me there as well. Have you tried Miri's and/or other 6.5 roms too? It also works fine there for me.
Click to expand...
Click to collapse
Yes, I tried Miri's and dozens of others but same behavior. wifi simply do not turn on. I initially thought it's a hw problem then I flashed back a stock rom. It works there also it works in every wm61 coocked build but not wm65.
Please shed some light...
I encountered exactly the same issue.
MY problem is, When I go to com manager, and on the wifi, its just the turning/ working icon and after that nothing happen. The wifi wont turn on, and when u got to wifi icon in the connection the turn on wifi wont be ticked. I hava tried a lot off rom and even back to original rom and spl all the same didnt change anything, but some times when I do a hard reset and soft reset it will be back, but some times wont work also.
is that a hardware failure or software?
if HW failure the wifi wont even turn on even a single time, but on my HD, some times it will be turned on and sometimes it wont.
Rather than trying to turn it on from the Connection Manager, have you guys tried to tick the box under Settings, Connections, Wi-Fi?
Not to point out the onvious but have you gone to Settings > Connections > wifi > wireless networks > network adaptors and changed this to 'The internet'?
@Fallen Spartan:
I tried every possible way but couldn't get succeed.
Finally I discovered that TNETW1251 driver itself giving this trouble. Driver simply don't respond. Then I converted the wifi driver to module, build the rom and that has fixed my annoying power on issue.
cheers
tomal said:
@Fallen Spartan:
I tried every possible way but couldn't get succeed.
Finally I discovered that TNETW1251 driver itself giving this trouble. Driver simply don't respond. Then I converted the wifi driver to module, build the rom and that has fixed my annoying power on issue.
cheers
Click to expand...
Click to collapse
Excellent, glad you got this sorted.
Hopefully others will search and read your fix for this.
Closing thread
Hello,
I was using multiple ROMs with RADIOs 2.05 and 2.08 and everywhere was this problem - when I calling to someone and press End Call (HW or SW button), phone doesn't end calling, only button get grayed, but it is still ringing.
Please, do you know what could help? Thank you.
bluetooth?
the only time I get this is when it connects to my in car bluetooth it never disconnects the call properly any rom!
DJGurth said:
the only time I get this is when it connects to my in car bluetooth it never disconnects the call properly any rom!
Click to expand...
Click to collapse
i get that issue sometimes as well.. i found it worked ok after i made sure the in car bluetooth was automatically allowed to connect to anything it needs.. followed by a soft reset.. should only be the once though
Ok this is interesting. I had never had this problem but now I have flashed to Flashmores latest and the ROM is great and fast (and yes I did hard reset after flashing) but now I have this problem.
When I'm in a call none of the touch keys work. Cant access the keypad or anything. Really annoying.
I have to use the hard key to kill the call.
Any thoughts?
Oh and I dont have a bluetooth headset!
GG
It's independent on Bluetooth and same problem is with hardware- and software- keys (buttons).
I have the same problem...Which ROM versions do you have? mine problems started after flashing ROMs from TMOUS...so versions 1.7 to 2.10...I will revert back to older ROMs...
I think this problem was also in stock ROM about 1.42..
Hi guys,
For those problems, I advice you to do these steps in order whenever you want to flash a ROM (stock,shipped,cooked ROM). If you want the stable ROM for daily usage... just flash the shipped ROM
-Choose Clear Storage in you current ROM.
-Take out your SD card and Format it by (FAT32)
-Connect your Device to PC and do a MTTY... You can read this for more details (do it in careful way)
-Then Flash the Shipped ROM 1.66 I suggest the 1.66.405.2 WWE.
-Do not hard reset after flash... I mean let your device through the "Customization" first then just skip all setting and Reset the device. While the device is getting reboot... Do a hard reset
-Setting up all things.
Hope this help
it doesn`t work I think this problem is according to radio ROM. I will flash another...
i had this problem yesterday and have fixed it
ceratin roms are only compatible with certain radios
for example yesterday i installed SONE 2.5 and i couldnt make calls, it would freeze
i looked at the ROM requirements and i was using a radio not supported by the ROM
simply change the radio respectively to the ROM
This problem, which I'm describing, is something other. RADIO patch is okay (I think), but phone is "slow" during phonecall and phonecall cannot be hanged out..
Hi all.!
I've installed a lot of Android ROMs and all of them doesn't give me errors except the WIFI. I don't know what's happen, but if i try to open connection the device is stuck on "Scanning..." status and the WIFI icon isn't shown on the top bar. What i've to do.? I've this bug on all of ROMs that i've installed, and all people with the same OS type haven't my problem. I've to change something in the options.?
For the other things, all ROMs that i've installed are all OK and the Device go well.
My ROM is original: 1.66 (ITALIAN)
My Radio Version is: 2.10.50.28_2 (the best for me)
Bluetooth and 3G connection are OK and also HSDPA go well. I want know if i can do something for solve this small problem with WIFI.
Hello everyone! That's my first thread.. (I'm Italian, sorry for my English)
Some month ago I've flashed a new radio. When the Touch HD restarted the wifi stopped to work properly. It can connect only if I put the Touch HD very close to the wifi router. If it is farther then some cm it doesn't connect.
I've already tried to flash another radio as another ROM, but still doesn't work..
Any solution?
1. after a radio rom flash, you should perform a hard reset, because otherwise pre-existing connections (saved wi-fi networks, bluetooth pairings) might not work anymore after the upgrade
2. if you have troubles with the signal strength, you can set wi-fi to max. performance instead of battery saving, depending on your OS rom the way to those settings might vary.
I've done the hard reset and set the wifi to max, but signal strength still very low..and still unable to connect to the network..
if you revert back to the radio rom/ OS rom combination you had before (when it still worked), it should work again. if it doesn't, do the full routine, flash back a stock rom, then your spl, rom and radio again, in combination with task 29, it must be the exact same state as before. otherwise, there is only one reason: a hardware defect, maybe the antenna cable of the wifi card got unplugged or there might be something actually broken. but given the exact timing of the events, a software reason is far more likely.
i also having this same problem too and i did flashed back to my stock rom and it still the same once i thought is my wifi faulty but when i try Android porting my wifi work flawlessly now i cant go back to wm. just wonder what has happen
Chef_Tony said:
if you revert back to the radio rom/ OS rom combination you had before (when it still worked), it should work again. if it doesn't, do the full routine, flash back a stock rom, then your spl, rom and radio again, in combination with task 29, it must be the exact same state as before. otherwise, there is only one reason: a hardware defect, maybe the antenna cable of the wifi card got unplugged or there might be something actually broken. but given the exact timing of the events, a software reason is far more likely.
Click to expand...
Click to collapse