Help Help Help Uspl Trouble - P3300, MDA Compact III upgrading etc.

Im trying to convert my german orbit into english with B&B4...activesync was working while USPL did its thing...screen went blank like it was supposed to but I lost activesync and can't go any further. What do I do???

Have you tried a hard reset?

MaskedMarauder said:
Have you tried a hard reset?
Click to expand...
Click to collapse
The screen WILL go blank and the phone will restart. This is normal. Follow the screen instructions and the USPL update will complete. Then you can flash your ROM.

How To Fix
I figured it out. once the screen does go black and activesync disconnects, just procede like it is sync'd and it works!! THANKS GUYS

Related

Do not install Hermes Extrom Unlocker!!

today i got Dopod U1000 and tried to unlcok extrom.
And use Hermes Extrom Unlocker and make soft reset.
It could not boot any more with WHITE SCREEN!
No hard reset worked and stop splash screen
PLS guys do not try that.
still can not find the way to reboot
Asukal said:
today i got Dopod U1000 and tried to unlcok extrom.
And use Hermes Extrom Unlocker and make soft reset.
It could not boot any more with WHITE SCREEN!
No hard reset worked and stop splash screen
PLS guys do not try that.
still can not find the way to reboot
Click to expand...
Click to collapse
I am sorry to hear that, did you buy it in Taiwan, do you think they will give you a replacement? hope so.....good luck
Asukal said:
today i got Dopod U1000 and tried to unlcok extrom.
And use Hermes Extrom Unlocker and make soft reset.
It could not boot any more with WHITE SCREEN!
No hard reset worked and stop splash screen
PLS guys do not try that.
still can not find the way to reboot
Click to expand...
Click to collapse
Have you tried to hardreset?
c0rnholio said:
Have you tried to hardreset?
Click to expand...
Click to collapse
yes after hard reset satck in splash and no more,,,
i hope dopod replace it but,,,,
How about reflash from boot loader? Hav you treid it?
cornelius said:
How about reflash from boot loader? Hav you treid it?
Click to expand...
Click to collapse
do u have boot loader for Athena?
i didnt tried to athe bootloader coz i dont have,
But treid to flash Hermes Bootloader, on PDA / PC showed me seems succsessufuly, but aftter re-enter bootloader, nothing had changed.
sad to hear that... bricked first day
Have you tried to reformat storage from bootloader, or to flash a rom again?
Asukal said:
do u have boot loader for Athena?
i didnt tried to athe bootloader coz i dont have,
Click to expand...
Click to collapse
See attached: 1.06G4H3 ATHENA SPL DVT Shipped
pof said:
See attached: 1.06G4H3 ATHENA SPL DVT Shipped
Click to expand...
Click to collapse
thanks, tested and still can not boot.
i wonder why only registry canged by CAB can not boot any more ??
it should not damage to device!
(But i have expienrece Himalaya Extrom Unlocker make another device OS read only before)
Any way, tried ways i could think all! and keep on trying other ways.
booteddddddddddddddddddd!
Thanks POF!
after installed your SPL, tryed flash OS OM 3 times.
it can boot!!
thanks POF!
i love u!
Asukal said:
Thanks POF!
after installed your SPL, tryed flash OS OM 3 times.
it can boot!!
thanks POF!
i love u!
Click to expand...
Click to collapse
ahhhh.....
so that means that you will not put your bricked athena for sale on ebay....i was hoping to pick some up for a couple of 100$$$
have fun with your device
fallenczar said:
ahhhh.....
so that means that you will not put your bricked athena for sale on ebay....i was hoping to pick some up for a couple of 100$$$
have fun with your device
Click to expand...
Click to collapse
yes,, you guys save my life!
and thanks for your watching me this stupid one.
T mobile UK Ameo
Hi I did tried to unlock and now I get only a black screen and I can't boot again. I have the old flash image , but I can not connect with active sync my ameo. How can I pump the old flash image into my ameo ?!
Thank you in advance!!!

Problem after upgrade to WM6. Please help!

I have serious problem with my PDA SPV M2000 after upgrade to WM6. After upgrade i try to restart my PDA with Hard Reset, but can see only 4 collored screen. I can acess only bootloader mode and nothing else... PLEASE HELP
reflash
Did you try a reflash?
I try all the steps 5 times but nothing. I try use WM6 from helmi and xpode. With the same resolution. Now i try to downgrade to WM2003...
I am back on WM2003. Thanx god
I got a gray screen whith serial v 2.07... and few pages i find dosent help me att all..... please help me some one....
brb66 said:
I got a gray screen whith serial v 2.07... and few pages i find dosent help me att all..... please help me some one....
Click to expand...
Click to collapse
the grey screen with serial v 2.07 is the bootloader mode...
maybe a reflash will do the trick...
how did you screw up the upgrading process? did you accidentally unpluged the cable? is it a corrupted file?
I have never experienced this, but, if i were you, I would reflash it. if nothing good come up,then maybe the file you are using to upgrade is corrupted...
hope this helps, and maybe the experts would have more ideas cause i am just a user.....
I've upgrade to WM6.0 pdaviet, but can't use GSM network : no services...
Any body help me plz...
fix it now, pdaviet'rom works well with 1.15.00 radio .
sorry for my English
Ibhave a tmobil MDA amd i did an upgrade to windows mobile 6 and now my MDA is slow in most of the programs also the SMS when inserting any messages the words do not show after at least 10 sec.
Please, definelly need help.
navarde
Have you performed HARD RESET?
What ROM did you use for flashing?
(also some installed programs may slow down your device a lot!)
I had the same problem. From time to time whem im flashing my phone its happening. After few soft resets it'll be ok.

Atom flash ROM Success, stuck at Update Utility Screen

Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
bennyyen said:
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
Click to expand...
Click to collapse
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
brian_2cool4u said:
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
Click to expand...
Click to collapse
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
bennyyen said:
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
Click to expand...
Click to collapse
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
brian_2cool4u said:
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
Click to expand...
Click to collapse
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
tjkhattak61 said:
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
Click to expand...
Click to collapse
No problem, I was sweating and crossed my finger when that happend to my unit before. I thought i'll say goodbye to my atom.
glad to help =)
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Where did you aquire this Chinese rom, perhaps you must ask the author or you could keep reading, try the Wiki!
bennyyen said:
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Click to expand...
Click to collapse
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
tjkhattak61 said:
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
Click to expand...
Click to collapse
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
bennyyen said:
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
Click to expand...
Click to collapse
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
brian_2cool4u said:
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
Click to expand...
Click to collapse
Thanks brian_2cool4u, will try later...
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
bennyyen said:
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
Click to expand...
Click to collapse
Hmmmmm thats odd? it should have been fix, oh well better get advice from where you got the rom or do a little reading in the wiki
Already can connected and flash any ROM, but new problem come out.
Comupter stuck at Stage 5 0% among 3 hrs still maintain 0%, but my device show Burn Radio MOT 100% completed
So i try to unplug the USB cable, my computer immediatly show Connection Error. After i hard reset my device, everything OK except No Radio ( NO GSM ).
Any advise
Thanks & Regards,

Can anyone help

I try to flash my cruise to the custom to 6.1
But when i start the pda turn to the load screen, and nothing happen follow this screen. Then, the pc will show the error of the connection.
My cruise will still hold, after I softreset the moible. norrmal, but i can't flash the rom. May anyone help. Thx
Also, I would like to have the offical rom of the big5 wm6.0 ver. Anyone can post.
Many thanks.
hi, make sure activesync is running.
http://forum.xda-developers.com/showthread.php?t=381600
Hi Dude...
did you install oli's hard SPL? (or any other hard spl for polaris?)
have a gr8 day
Itay
ok, let me try the hard SLP first.
Thanks a lot.

plz help Sp3i freeze on wm splashscreen & cant reflash by USB

my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.
Your phone can be reflashed with Mtty even when it freeze on the boot screen cause its not necesary have the phone ON.
Tried to do a hard reset maybe is a windows registry problem.. after the hard reset the values on registry will be reset to default.
already done that, and doesnt work, even it reflashes through USB but afther reaching 100% the phone restarts and get stuck again in the same place, no matter if I hard Reset or reflash by USB the phone still get freeze.
can any one tell me how to delete all the data on the memory to make a clean reflash? or how do I reupload the firmware? is there a way to recover the phone?
remember I already install the WM5 and back to WM2003SE but after that the problem started, maybe i screw someting wile doing it?
Solaris_irc said:
my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.
Click to expand...
Click to collapse
Tutorial for sd flash
Check here

Categories

Resources