Related
Hi all,
Just a short 'FYI': I've installed the PPC2003SE version of the SJPhone client on my wizard (my provider just introduced a voip service), and it seems to work just fine. Quality is fine, much better than Skype (although I haven't tried the new beta from Skype yet).
Greets,
David
dafit said:
Hi all,
Just a short 'FYI': I've installed the PPC2003SE version of the SJPhone client on my wizard (my provider just introduced a voip service), and it seems to work just fine. Quality is fine, much better than Skype (although I haven't tried the new beta from Skype yet).
Greets,
David
Click to expand...
Click to collapse
10x, will definitely give it a try,
a link for SJPhone:
http://sjlabs.com/sjp.html
naughty said:
dafit said:
Hi all,
Just a short 'FYI': I've installed the PPC2003SE version of the SJPhone client on my wizard (my provider just introduced a voip service), and it seems to work just fine. Quality is fine, much better than Skype (although I haven't tried the new beta from Skype yet).
Greets,
David
Click to expand...
Click to collapse
10x, will definitely give it a try,
a link for SJPhone:
http://sjlabs.com/sjp.html
Click to expand...
Click to collapse
whoa!! this works so [email protected]!
this is a major kick in SKYPE's butt, as they claim 200mhz on wizard is not powerful enough..
guys GO FOR IT!!
Could you please explain how to configure SJPhone for a VoIP-Account?
My Wizard is online with WIFI behind a AP and FritzBox. But there's only one way sound. Means, the other side is able to hear me but other way round there's no noise...
Hope you understand me :?
do you guys know if there's a way to set up the phone and sjphone so I could use it as a normal phone and not a speakerphone?
thanks
a
I am also looking for Sip config.
I have my own provider and thus I cannot have it work.
I get a 480 error all the time.
Thanks
I have downloaded the version succesfully on my .
I use at my home
How to implement and to use now on my. Anybody knows??
This software doesn't support Skype calls, correct?
SjPhone is a great app, I use it every day to call .
To use it you will basically need the parameters from you service (voipbuster, netappel, etc.) and of course your username + passwd
For different settings you can check:
http://www.voip-info.org/wiki/
For example for voipbuster create a new profile in Options, then just enter :
sip server : sip1.voipbuster.com
domain : voipbuster.com
stun server : stun.voipbuster.com (I also check the send discovered IP in the STUN tab)
Then click ok, and enter your username+passwd and check "Store blablabla..."
Voila
Oh cool, just trying to play with this... but how do you guys answer? When it rings I get a notification window, but with no options and thus can't answer unless I use the "Auto-accept calls" feature...
CJSnet said:
This software doesn't support Skype calls, correct?
Click to expand...
Click to collapse
Anyone?
kilrah said:
Oh cool, just trying to play with this... but how do you guys answer? When it rings I get a notification window, but with no options and thus can't answer unless I use the "Auto-accept calls" feature...
Click to expand...
Click to collapse
This is a known issue but they said that it will be fixed in theWM5 compatible release.
The current one is 2003SE compatible.
So we must have patience
CJSnet said:
CJSnet said:
This software doesn't support Skype calls, correct?
Click to expand...
Click to collapse
Anyone?
Click to expand...
Click to collapse
No, it does not support SPYke.
SPYke have their own protocol (not public), whereas SJPhone is based on the public protocols (SIP, IAX).
kelu said:
SjPhone is a great app, I use it every day to call .
To use it you will basically need the parameters from you service (voipbuster, netappel, etc.) and of course your username + passwd
For different settings you can check:
http://www.voip-info.org/wiki/
For example for voipbuster create a new profile in Options, then just enter :
sip server : sip1.voipbuster.com
domain : voipbuster.com
stun server : stun.voipbuster.com (I also check the send discovered IP in the STUN tab)
Then click ok, and enter your username+passwd and check "Store blablabla..."
Voila
Click to expand...
Click to collapse
any chance of a detailed seup guide from you for us voip newbies please? I'd love to get this one going.....
CHeers
Ed
p.s. for me, i only need to do pc to ppc calls and ppc to pc -do i need a commercial voip account for this?
ed.dark said:
kelu said:
sip server : sip1.voipbuster.com
domain : voipbuster.com
stun server : stun.voipbuster.com (I also check the send discovered IP in the STUN tab)
Then click ok, and enter your username+passwd and check "Store blablabla..."
Voila
Click to expand...
Click to collapse
any chance of a detailed seup guide from you for us voip newbies please? I'd love to get this one going.....
CHeers
Ed
p.s. for me, i only need to do pc to ppc calls and ppc to pc -do i need a commercial voip account for this?
Click to expand...
Click to collapse
first you need an account on their network (netappel, voipbuster and others belong all to sipdiscount.com).
So download the voipbuster app on your PC from www.voipbuster.com, install it, then create an account. This step is necessary to create an account for your PPC later.
Now download SJPhone
http://www.sjlabs.com/softphone/SJphone-PPC2003SE-303c.exe
and install it on your PPC via ActiveSync or whatever (you launch the exe on your computer while the PPC is conected )
After install discaonnect your PPC from the PC, enable wi-fi, connect to the internet and then launch SJPhone from your PCC StartMenu -> Programs.
Then go in the Menu to Options and chose the Profiles tab and click on new. Give it a name like voipbuster, click ok and the intput the settings above in the SIP Proxy tab and the STUN tab.
Then click ok and your ready to ... make calls on the free destinations.
If you wanna be called or to call more destinations, add some credit to your account by logging in with your username and passwd on www.voipbuster.com from your PC.
After adding credit you can also have an inbound number for the others to call you.
Good luck
SJphone button assignment for accepting/rejecting calls
kelu said:
kilrah said:
Oh cool, just trying to play with this... but how do you guys answer? When it rings I get a notification window, but with no options and thus can't answer unless I use the "Auto-accept calls" feature...
Click to expand...
Click to collapse
This is a known issue but they said that it will be fixed in theWM5 compatible release.
The current one is 2003SE compatible.
So we must have patience
Click to expand...
Click to collapse
I also ran into the problem of not being able to answer calls. I partially solved the issue by going to the 'CE Options' tab in the options menu, and assigning other buttons for 'accept' and 'reject' calls. I used the wizard's 'left' and 'right' buttons, as these are situated right next to the 'answer' and 'reject' buttons. This works just fine.
Greets,
David
One cool application is if you have an Avaya IP Office PBX they have a softphone that runs on PPC with WiFI you can connect back to the office.
I'm still playing with it on WM5 but It's been working pretty well.
I installed this on my K-Jam and it seems to work fine apart from a couple of issues. The other party says they can hear themselves as clear and loud as they can hear me. Is there anyway to improve the echo cancellation? Ideally, I would like the voice to be transmitted through the ear piece and not the speakers.
Also, the call gets dropped after about 2 minutes. I'm sitting right next to my router so wifi signal is strong. Does anyone else exprience this dropping of calls? Also, after the call is dropped I cannot initiate another call unless I close SJphone and toggle my wifi off and on then restart sjphone. Are others also seeing this?
Accessing numbers from outlook is very slow on my phone too.
Otherwise received voice quality and the voice quality on the receiving end is good.
When is the WM5 version going to be ready?
a WM5 beta version of SJPhone is now available here
It handles screen rotation fine and fixed the incomming call notifcation to work on windows mobile 5.
Nobody seemed to answer my question
Is anybody else getting a bad echo? The other party says they get a bad echo when I call them with SJPhone. I can't get the sound to come from the ear piece only the speakers so I am guessing the other party heres their own voice from the speakers.
What's everyone else doing - using headsets?
Hello,
I follow these instructions to use voipbuster on my htc TyTN (Hermes) and it does not work properly, but as soon as I connect the headphones that comes in the box, the device freezes and does not work at all.
The only way it works, but not very well, is without the headphones, and as you all know, the speaker doesn´t sound very well too, and of course i want some privacy to talk to.
Here are the instructions I followed:
Right click on SJPhone. Select Option menu and then click in Profiles tab. Click on new button, type the name of your profile (i recommend voipbuster) and select Profile "Calls though SIP proxy) and click OK button. A new window appears.
In this new windows click on SIP Proxy tab an fill the following fields: Proxy Domain: sip.voipbuster.com : 5060, User Domain: sip.voipbuster.com; Accept other fields defaults by pressing OK Button.
Finally, Right click on SJPhone and select Restart option. You user id and password will be asked.
This should work for you since it did for me.
Thanks in advance
WM6 VOIP
jumanji1212,
Why don't you use he internal VOIP in stead of SJPhone? It works very good, even with Voipbuster. The only disadvantage is that you can not usernames.
And sorry, I do not know SjPhone very well. Used it ones to check it out.
Good luck
tembares said:
jumanji1212,
Why don't you use he internal VOIP in stead of SJPhone? It works very good, even with Voipbuster. The only disadvantage is that you can not usernames.
And sorry, I do not know SjPhone very well. Used it ones to check it out.
Good luck
Click to expand...
Click to collapse
what is the internal VOIP ??????
thanks for your reply buddy
VOIP
Read it here. For any question, reply.
http://forum.xda-developers.com/showthread.php?t=299950&highlight=ipdailplan.xml
Pufffffffffff, what a mess!!! I don´t understand anything. The fact is I install the very same program on my HTC TyTN and in the qtek 9000 (Univeral), but only works properly on my Universal device, with and without the headphones. But it does not work on my TyTN (Hermes) properly without using the headphones and as soon as I plug the headphones, the TyTN freezes at all.
Both devices have the WM5, and don´t know what can I do.
Sorry for my lack of pda-culture but I have no idea about the link you posted before.
Headphone
Sorry, I can not test how VOIP acts with a headphone. Yesterday I send my TyTN to the repaircenter, because of the screen-alignment-error.
When I get it back, I will test it myself. I will give you my report.
ok, thanks tembares
New config program from Shaun33
jumanji1212 said:
ok, thanks tembares
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=303493
This will configure the WM6 VOIP xml for you. Just input your VOIPbuster info.
I did use it but dont have a SIP account yet.
stukes said:
http://forum.xda-developers.com/showthread.php?t=303493
This will configure the WM6 VOIP xml for you. Just input your VOIPbuster info.
I did use it but dont have a SIP account yet.
Click to expand...
Click to collapse
So,...., Do you thinks with this cab I´ll fix my headphones and the general malfuction problem with SJPhone??? Hope that, and thank you
with WM5, the same problem yet after all. what do you advise???
thanks for your interest
jumanji1212 said:
So,...., Do you thinks with this cab I´ll fix my headphones and the general malfuction problem with SJPhone??? Hope that, and thank you
Click to expand...
Click to collapse
This CAB will get you using the wm6 VOIP software. The bluetooth issue is discussed in another thread. You will have to pipe all of your audio VIA the bluetooth driver. I believe sluth has a fix. I will do some searching for you. Dont let me do all the searching tho
Hello all,
I'm trying to use a VoIP server from PFINGO on my Kaiser without success. Does anyone known if not all VoIP service works with Wm6? Any suggestion for a VoIP service in India or Asia?
Thanks
Stefano
stemilano said:
Hello all,
I'm trying to use a VoIP server from PFINGO on my Kaiser without success. Does anyone known if not all VoIP service works with Wm6? Any suggestion for a VoIP service in India or Asia?
Thanks
Stefano
Click to expand...
Click to collapse
Hi Stefano, i didn't exactly understand what are you looking for, however for voip services you can check here:
http://www.voipbuster.com/en/index.html
http://www.voipcheap.com/en/index.html
http://www.voipdiscount.com/en/index.html
http://www.voipstunt.com/en/index.html
or here
http://www.voip-rates.net/it/index.php
http://www.voipproviderslist.com/
and use any client software; there are a lot free, like fring, SJphone, or you can also use the WM6 Voip app, look here http://forum.xda-developers.com/showthread.php?t=338146&highlight=kaiser+voip
I hope to help you,
google is your friend
ciao
I know there're many voip services, but there's one is know to work with WM6 VoIP client ?
PFingo seems not to work.
Stefano
stemilano said:
I know there're many voip services, but there's one is know to work with WM6 VoIP client ?
PFingo seems not to work.
Stefano
Click to expand...
Click to collapse
Hi Stefano
Like dom said ... You can use voipstunt or voipdiscount together with SJ Phone. I have used on WM6 and it works flawlessly over wifi in India.
just create a account on any of the services listed above(Voipstunt/Voipdiscount) and then use the SIP settings listed on their site to configure the SJ Phone client.
Hope this helps.
Atit.
Can anyone recommend a sip client for the Leo?
Want to connect to a asterisk server.
Thanks
what about fring? point to m.fring.com from inside you browser
Have you given THIS ONE a try? Also, make sure your data plan allows for VoIP calls, many operators block them for obvious reasons.
omneity said:
Have you given THIS ONE a try? Also, make sure your data plan allows for VoIP calls, many operators block them for obvious reasons.
Click to expand...
Click to collapse
Great find.. Working great with my HD2 <> Asterisk
Works like a charm on my HD2 / Asterisk configuration too, thx!
Yes! said:
Works like a charm on my HD2 / Asterisk configuration too, thx!
Click to expand...
Click to collapse
Is it working on 3g. Mine is not working on t-mobile 3g but working on wifi connection
pda_crazy said:
Is it working on 3g. Mine is not working on t-mobile 3g but working on wifi connection
Click to expand...
Click to collapse
it works great with both type of connections here.
Ramzidk said:
it works great with both type of connections here.
Click to expand...
Click to collapse
(here) - Are you meant by US? Seems t-mobile uk are not allowing to have voice over IP facility as a fair usage policy.
But I can use skype in my network...
pda_crazy said:
(here) - Are you meant by US? Seems t-mobile uk are not allowing to have voice over IP facility as a fair usage policy.
But I can use skype in my network...
Click to expand...
Click to collapse
Skype is not sip/voip
htc-hd2 said:
Skype is not sip/voip
Click to expand...
Click to collapse
Any help guys. I use ActionVoip to make international calls and I am very desperate to use it on my HD2.
I tryed this and work fine in hd2
http://www.ageet.com/us/Products-AGEphone-Mobile.htm
Hi!
I'm a novice in the Android, XDA world...
I recently bought a G3, and after 1 day I had upgraded to Froyo.
But I'm having some troubles with proxy...
At my home, I don't need it, so everything works fine using my wifi connection.
But at work, I configure the proxy and Web Brower, Navigation, and others apps keeps working.
OTHO, some apps can't connect (eg. market, maps, rom gripper, etc).
Anybody knows where I can configure the default way of general apps connect to internet?
TKS.
The proxy probably filters your traffic and blocks it on not well-known ports. You should ask its administrator for details on what kind of traffic it allows (if that is feasible).
mizch said:
The proxy probably filters your traffic and blocks it on not well-known ports. You should ask its administrator for details on what kind of traffic it allows (if that is feasible).
Click to expand...
Click to collapse
The proxy only allows connections on port 3128.
Do you think that some apps just woks with port 80?
And, if that's the case, anybody knows how to change it?
TKS
^i thikn itd be easier to use a different proxy than change app ports, but im not sure
stubborn_d0nkey said:
^i thikn itd be easier to use a different proxy than change app ports, but im not sure
Click to expand...
Click to collapse
I guess you're talking about use some app that changes the proxy address for all, include apps...
I'm using native G3 proxy settings. I tried connect using proxy with other apps but anyone did it for me, just the android's stock.
I need a file on system that allows me to change the connection configurations (I mean... I think I need it! )
Hey, Nathan I'm having a similar problem except that only port 8080 is open through proxy.
I am using transproxy to connect to the net.
All apps work except Market downloads and Gtalk dont work.
Did u get a solution ?
nathan.lopes said:
I tried connect using proxy with other apps but anyone did it for me, just the android's stock.
Click to expand...
Click to collapse
Did this method make all the apps connect through the proxy?
akash.gpta said:
Hey, Nathan I'm having a similar problem except that only port 8080 is open through proxy.
I am using transproxy to connect to the net.
All apps work except Market downloads and Gtalk dont work.
Did u get a solution ?
Click to expand...
Click to collapse
I can't do it yet. Here, the port that is open is 3128.
Some apps just bypass the proxy settings.
Even when I let the proxy (configured because my workplace network)configured, market works at my home (where there's no proxy).
But browser and others (that works fine with proxy) don't.
I don't know if this is a built-in app configuration (if it is, the only way is to create a route, using the address called by app, redirecting to the proxy - actually, I thought in that just now! I'll test it later! ), that is present on Market, Navigation, Maps and others...
Or if this is a system configuration. If it is, all we need is to find where its defined and change that.
akash.gpta said:
Did this method make all the apps connect through the proxy?
Click to expand...
Click to collapse
No. Using G3 stock's proxy settings, some apps can't connect to the internet.
I'm not a Android or Linux expert... so I need help...
TKS
nathan.lopes said:
Even when I let the proxy (configured because my workplace network)configured
Click to expand...
Click to collapse
how do u configure ur proxy ? some app/or manually redirect ports
nathan.lopes said:
market works at my home (where there's no proxy).
Click to expand...
Click to collapse
At my home (where there's no proxy) which is far away from my university, I'm able to connect all apps to the internet. (I visit my home once in five months or so.)
nathan.lopes said:
But browser and others (that works fine with proxy) don't.
Click to expand...
Click to collapse
That's because somebody(as u mentioned) changed the proxy settings,u will have to undo it and they would work again.
nathan.lopes said:
I don't know if this is a built-in app configuration (if it is, the only way is to create a route, using the address called by app, redirecting to the proxy - actually, I thought in that just now! I'll test it later! ), that is present on Market, Navigation, Maps and others...
Click to expand...
Click to collapse
I use transproxy to redirect to the proxy and it works a great deal except market downloads and Gtalk
nathan.lopes said:
I'm not a Android or Linux expert... so I need help...
Click to expand...
Click to collapse
me too. guess we both need help
akash.gpta said:
how do u configure ur proxy ? some app/or manually redirect ports
Click to expand...
Click to collapse
I'm using the native G3 proxy configuration (Settings>Wireless and network>Menu>Advanced>proxy).
akash.gpta said:
That's because somebody(as u mentioned) changed the proxy settings,u will have to undo it and they would work again.
Click to expand...
Click to collapse
Yeah, I know, when I'm at home I remove the proxy addres and everything work again.
akash.gpta said:
I use transproxy to redirect to the proxy and it works a great deal except market downloads and Gtalk
Click to expand...
Click to collapse
That's what I'm trying to solve: Market and others that bypass proxy settings...
TKS
nathan.lopes said:
That's what I'm trying to solve: Market and others that bypass proxy settings...
TKS
Click to expand...
Click to collapse
Keep this thread updated and keep posting your findings
Also I found this app "ASProxy" on market, dont know if it works.(I just cant download from the market)
akash.gpta said:
Also I found this app "ASProxy" on market, dont know if it works.(I just cant download from the market)
Click to expand...
Click to collapse
Good news???
I was trying to start market by command line, adding parameters... (Maybe its not the easiest way, but at least I'm learning a lot! )
But no sucess after all...
TKS