Hi,
GSM/3G module not work anymore (disabled phone icon and message of “No service”) and when i compose the number with the phonepad; i'm forced to soft reset my P3600 and often when the green shield of Windows Mobile 5 appears.
At the bootstrap, when is shown white page with the HTC logo, it appear written “the M 05”, “B 05”, “D 1,23”, and appear moreover written “R NONE” and “G NONE” instead of the indication of the module versions for the radio etc.
Still and many times over i have installed, always with positive outcome, also the shipped ROM with GPS enabled downloaded from the site of HTC Europe, but the result is the same: P3600 not work anymore and it is blocked also when i try to close the phone pressing the off button for some seconds.
What can i do? There is a hardware problem? I must send it in attendance as it is still in guarantee?
GPS Enabled
ROM version: 1.23.408.2 ITA
Radio version: 1.38.00.11
Extended ROM version: 1.23.408.103
Related
The problem appeared today morning, while listening music using tcmp. the sound stopped suddenly, and standard animated cursor appeared over tcmp screen. i closed tcmp, and the rest of the system seemed fine, i was able to mute the phone and entered my work place. After a while i noticed the screen is off and i can not turn it on using pwr button, although green led kept blinking so the phone was operating. after a soft reset it would not go over splash screen showing IPL, SPL (which are: IPL: 1.06, SPL 1.06, GSM: 01.12.10, OS 1.6.2.4).
I've tried multiple times and still the same, only difference is that sometimes I can see the cursor and sometimes not. I can get to rgb screen and "press send to restore" as well, but that's it. I can't remember whether previously pressing a key illuminated a screen and keys, but now it doesn't. I used to have problems with screen not going black on idle since few days, but that's it. What could have happened? And if the only solution is hard reset, please tell me, could I somehow backup my contacts now? I don't have activesync here so I have to wait till I finish my work to find out..
please help anyone...
rom version : 1.6.2.4 WWE,
date : 11/15/05
radio : 01.12.10
protocol : 4.0.13.23
extrom : 1.6.2.105
That's spooky. My MDA has the same versions of IPL, SPL, GSM and OS, and this morning started misbehaving.
What's this rgb screen you can get to with the "press send to restore" option?
How do I do a hard reset (I have a backup on SD) without being able to get to the Start>Settings>System>Clear storage control panel option?
Rgb screen is a bootloader which i enter by holding cam+voicedial+commmanager butons while softreseting wizard. the other screen i mentioned i enter holding cam and voice buttons, and then pres reset. that screen says 'pres send to restore factory defaults any other key to quit' and it does hard reset if you press green button here...
my problem seems to be over for now, i managed to turn the phone on while i plugged it into a wall charger (believe me, the battery was not a problem - i don't know for how long it's ok now, but at least i made contacts backup now so that i'm ok with a hard reste if i have to...
You both have old roms and could do with upgrading them to aku2 roms. (your device will be more stable) i.e. the first number of the rom will be 2. Please dont ask me to go through how to flash a rom because there are hundreds of posts on the same topic and read the wiki - shortcut top left of the screen. You need to identify whether your device is g3 or g4 but i suspect you both have g3 chips.
Now read & read esp the wizard upgrading forum and wiki and then when you feel confident - flash your device.
mu chipset is g3 based on my ipl/spl info... i wouldn't dare to ask anyone to explain the process of flashing, i'm not that crazy. only thing i'd dare, would be to advice me what rom should i use... or a way to determine this, since i know it can't be just any rom...
banannq said:
mu chipset is g3 based on my ipl/spl info... i wouldn't dare to ask anyone to explain the process of flashing, i'm not that crazy. only thing i'd dare, would be to advice me what rom should i use... or a way to determine this, since i know it can't be just any rom...
Click to expand...
Click to collapse
Looking at your rom numbers i gather you have a t-mobile vario - is it uk or usa rom or polish - i see you live in poland.
there latest uk rom is here ftp://[email protected]/Wi...Prodigy_2210206_109_21911_TMO_UK_WWE_Ship.exe
us rom ftp://[email protected]/Wizard/Roms/Tmobile/RUU_Prodigy_2170702_217_20710_TMO_US.exe
user name xda password xda
Its prob best you sim unlock and cid unlock before you flash in case you change to a non-tmobile rom inc one of the cooked roms.
see here http://forum.xda-developers.com/showthread.php?t=249474
and read dr puttingham's tutorial http://forum.xda-developers.com/showthread.php?t=285435
and now i have given you more than enough hints
p.s. by the way remember to write down your gprs settings and mms settings to use with your new rom.
thats right, its tmobile vario, uk one. it is sim unlocked, i'm not sure about cid but it should not be a problem. thanks for the hints, it really seems more then enough;] i'll probably have to use theese, as soon i have a spare evening...
you don't have to explain me the importance of gprs settings - forcing my wiz to work in uk's o2, then in polish plusgsm, then loosing settings and doing it again finally got me into a habbit of backing every settings up ;]
and last but not least, guys, yesterday i did my first HR ;] ...
Hi,
I'm facing a problem with my customer O2 phone. It's showing "No Service with "!" mark. I have upgraded everything .. but nothing changes ..
It's a hardware problem or Software problem ??
Thank You
ive got the same problem.... can anyone help please.
You need to reflash using the 'radio ROM.nbf' file.
My magician's radio, stops working after the unit reboots after doing a ROM update. The radio works immediately after the inital splash screen (before the extended rom autorun). After this, the radio doesn't work.
If I skip the extended ROM instal, by rebooting the device prematurely, the radio still doesn't work.
I've tried many different ROM numbers. I've even downgraded to the stock ones that came with the unit.
Any suggestions?
Hint: My radio only works immediately after a hard reset, but not after rebooting using the extended ROM (customization). (aborting the customization, the radio doesn't work anyway).
it could be barred IMEI
What now works for me, is enabling, then disabling 'Flight-mode" on the phone.
My SPV3100 had the No GSM message and got stuck on the Windows Mobile screen a few weeks ago. Tried HR, levaing the battery out etc etc etc but nothing worked.
I was ready to chuck it away, but after about a month of reading as much as I could about the Hermes on this forum I managed to get the phone working again by loading a different radio.
I then loaded HardSPL v7, and flashed the rom/radio using the current version on the Orange UK website.
It worked fine for a while, but now some strange things are happening;
- Call doesn't appear to end when I press the red hang-up button (although the call is actually disconnected)
- Phone freezes and buttons/touch screen will not respond
- Occasionally hangs on the Windows Mobile screen
- Occasionally get No GSM message
- Occasionally get Radio: None, GSM: None messages
- Outgoing call fails on first attempt, then phone loses network, searches, finds it and then call connects (in an area where I know reception is usually great)
- Battery dies in about 12hrs, even when sitting in standy and not being used.
These things happen at different times and independently of each other
Current stats of the phone:
IPL-1.04
SPL-2.10.Olipro
ROM version 2.11.61.3
Radio Version 1.38.00.01
Protocol version 32.71.7020.12H
Apart from updating the rom, I have also tried HR and the Activesync tip
Is there a better rom/radio version that I could try (I'm on Orange UK) or is this sounding more like a hardware issue?
Thanks in advance
If no-one can help with the problems i have listed, then could someone point me in the right direction of a decent radio/rom version?
Thanks
update with an official orange rom, then flash any cooked rom. I had a similar problem on one of my hermes and found if you use the official upgrade to flash first it solves the problem also state what the rom was that you flashed
Hi,
I did flash the official Orange rom already (downloaded it from the Orange website), and am having the problems listed
Current stats of the phone:
IPL-1.04
SPL-2.10.Olipro
ROM version 2.11.61.3
Radio Version 1.38.00.01
Protocol version 32.71.7020.12H
Do you think it didn't flash properly (bad sectors etc)?
Only way to find out is to check.....
If you're not sure, re-install the ROM.
The problem is:
I really don't know exact course...I have Win 6.1 (Pharos_WWE_ROM_5.2.20226.by.poldo)
I've started installation of sls2009, firstly it installed Windows CF 2, then SQL and asked for Soft Reset, but I continued installation - and then installation program installed the sls2009. Then I performed soft reset by default built-in (by poldo) program 'softreset'.
So, when my device turned of & on again - it froze on black screen with red-colored letters - GSM module version etc... and that's all....nothing further....still that black screen with red letters...
And I don't know either it happened be course of SQL installation or Win CE 2, or be course of 'softreset' program... and I can't flash any ROM as I have no hard SPL. I've flashed ROM by using Jump SPL only.!
Correction: PHAROS_WM6.1_V05_B20275 by poldo...
and it seems device to be online..partly....as there is green led-diode flashing as if it loaded and online. then - when I press&hold Power button - I hear Beep sound as if I trying to turn device off....(but when I use central Hardware button to reboot, but It still don't responding - still black screen with red letters...
Sorry for panic....Hard Reset saved my ass....
Hi,
My device often has an unexpected crash.
Sometimes the charge has sudden collapses and the battery is hot.
I replaced the battery with a product compatible because the original is not available but the problem has remained.
Now use my device in airplane mode (sim not inserted) and if necessary use the wifi.
Device information:
OS: Windows Mobile 6 Pro
ROM version: 1.11.408.1B ITA
What could be the problem?
Thanks in advance,
Hi
Elf has very small memory, a few programs running together and you get a crash. I personally would flash a custom 6.1 Onyx Rom http://forum.xda-developers.com/showthread.php?t=426540 to rule out software related issues. If you need an italian version seach in the Development forum http://forum.xda-developers.com/forumdisplay.php?f=374.
elf-uspl.exe (3.10), step 2/3 output:
"Phone screen should now be blank and the activesync icon gray. If not, the loading procedure has failed and you'll have to repeat again."
Where is the problem?
i have reboot device and completed the process but i receive an error 270 from "PDA Phone ROM Update Utility 3.27.4.3" applcation: "The image file is corrupted. Please check your Update Utility"
Error 270 means you are still cid locked, so you can't flash any custom rom.
Today I install Onyx 4.1 in my device but the problem has remained.
In particular, I highlight the following critical issues and problems:
- charge the device (usb and electricity network)
- turn on device
- sudden crash
Now, i think this is an hardware problem. Are you agree with me or you have other software solutions?
Thanks!
Yes, you should see if your battery fits well and contacts are tight, look also in usb if something's not ok, change cables before you go to service.
I have checked the battery and its contacts and it all seems ok.
I have changed the usb cable but the problem has remained. Now?
I now remember the same problem with my brother's elf: we eventually brought it to service which diagnosed a damage to the motherboard. He decided not to repair due to the high cost so the question remains open...
Ok. Now, I would consider changing the motherboard. Where can I find online, the board?