Jabra 250 in U1000 for WM6 - Advantage X7500, MDA Ameo General

My U1000 has been upgraded to WM6. Everything goes smoothly. But I discovered my Jabra 250 bluetooth headset only responds to the phone function of the device. The music or voice from TextSpeech Pro does not come from Jabra 250 but from the speaker of the device. Does anyone has the same problem? Does anyone know how to fix this problem?

have a look at this:
http://www.freewareppc.com/communication/bluetoothaudio.shtml
i haven't tried it out myself because im still waiting for my new bt headset (a jabra 250v)

mojo2000 said:
have a look at this:
http://www.freewareppc.com/communication/bluetoothaudio.shtml
i haven't tried it out myself because im still waiting for my new bt headset (a jabra 250v)
Click to expand...
Click to collapse
Thank you mojo2000, it is the exact software that I have sought out. It works on U1000 like a charm.

After install this app, the buttom on the blue tooth headset to activate the voice command has disappeared, and the function to activate the voice command can not revive even though to uninstall the app and soft rest. I think the function to activate the voice command has to come back with a hard reset May be Jabra 250 is an old model which I bought it about 3 years ago. Hi, friends, whether newer models of Jabra have this problems or not. If newer model does not have this problem, may be it's time for me to buy newer model of Jabra.

panvita said:
After install this app, the buttom on the blue tooth headset to activate the voice command has disappeared, and the function to activate the voice command can not revive even though to uninstall the app and soft rest. I think the function to activate the voice command has to come back with a hard reset May be Jabra 250 is an old model which I bought it about 3 years ago. Hi, friends, whether newer models of Jabra have this problems or not. If newer model does not have this problem, may be it's time for me to buy newer model of Jabra.
Click to expand...
Click to collapse
I use the Jawbone and tested with it this morning. While the program is active, the button press does not activate MS voice command. De-activated and immediately tried again without success(pop-up came but sound was not heard and command was not taken by VC), but after about 10 seconds tried again and VC workd again with the program exited.

victoradjei said:
I use the Jawbone and tested with it this morning. While the program is active, the button press does not activate MS voice command. De-activated and immediately tried again without success(pop-up came but sound was not heard and command was not taken by VC), but after about 10 seconds tried again and VC workd again with the program exited.
Click to expand...
Click to collapse
The forum http://www.trianglepowers.com/PPC/Posts.aspx?TopicID=23 has received a lot of reports saying that this app breaks the ceberon speed dial program which is embeded in U1000. I wonder whether there is any blue tooth headset can transmit all sounds from the handset to the headset without installing the blue tooth audio app?

panvita said:
The forum http://www.trianglepowers.com/PPC/Posts.aspx?TopicID=23 has received a lot of reports saying that this app breaks the ceberon speed dial program which is embeded in U1000. I wonder whether there is any blue tooth headset can transmit all sounds from the handset to the headset without installing the blue tooth audio app?
Click to expand...
Click to collapse
Jabra 8010 does it, plus music even on one (mono) configuration.

mojo2000 said:
have a look at this:
http://www.freewareppc.com/communication/bluetoothaudio.shtml
i haven't tried it out myself because im still waiting for my new bt headset (a jabra 250v)
Click to expand...
Click to collapse
mojo2000, i am waiting for your report for trying jabra 250v because i like its design.

once I got it, i'll post a short report — promised

mojo2000 said:
once I got it, i'll post a short report — promised
Click to expand...
Click to collapse
mojo2000, i am waiting for your report for trying jabra 250v because i like its design.

Okay,
I already posted a report to a german ppc-board,
and I'm going to post the english version here later today.
http://www.ppc-welt.info/community/showthread.php?t=115535

Short Review of my Jabra BT 250v
Review (one day later) as promised here:
http://forum.xda-developers.com/showthread.php?p=1450165#post1450165

Related

who's bluetooth headset is working well with Voice Command

registry hack.
I have a SE 662 headset and it will only work once, after that it seems like the gate is left in 'limbo' you cannot use the headset to 'initiate' VC again.
One warm reboot you can then use it once again.
I'm interested which headsets are working well, I've head about the bluespoon X2 but I can't find that on the UK websites.
Let me know.
Thanks.
Jabra.
Jabra, is that the 250 or the 800?
Thanks for the reply
the jabra headsets are real good. i use the bt250v with my wizard and the 800 with my universal, and they are amazing. performance is great, battery life is superb.
ciao!
my jabra BT330
is working great !!!!!!!!
I use my Wizard with a Motorola HS801 Bluetooth Headset! Works well with it! ;-)
peteborota: I was given a Sony headset to use with the Universal to figure out some hacks (search for VJElectrify), and I also found that after the first use of voice command, the audio gateway is left open. I made an app (VJVolubilis) to close the gateway, disable bluetooth, reopen bluetooth, repair and then open the gateway again. It works, but it's a damn longwinded way to re-gain control of VC.
However, since the guy that gave me the headset had successfully been using it with VC on the same hardware (Universal), I think there may be a software combination causing this spazz up. I will hardreset at some point and try again, but I'd be interested in feedback on this issue as well.
V
my Sony-Ericsson HBH-660 works perfect with my Wizard
Motorola H500 works great too :lol:
Plantronics Voyager 510 works too
Plantronics Voyager 510 - excellent
Moto 810 works well. One thing I did notice is that there is about a 1-2 second delay in ability to recognize commands.
My Moto HS810 works with voice command (more than once, but you have to press the button on the headset 3 times to get it to trigger VC)
voyager 510 did not trigger vc at all.. ever.
moto H700 triggered only once then I had to reboot the phone.
mototola h820,
motorola h820 works perfectly, even with clam shell closed, the salesmen in the store dealing with the headsets advised me that motorolla bosted much further range and battery life over most other headsets, he also said that the nokia head sets, had the worst range and battery life, may be just his expert opinion, but I've been very happy with my choice
Re: mototola h820,
I use nokia HD3-w and it works good,but i have a serious problem with imate k-jam.because when i press and hold the bluetooth button it doesn't wake up the device when it is in standby mode but when i double press the bluetooth button it works on dialing the last number.does anyone have the same problem.
and also i want to know how often do you put your device on standby mode because i usually press the power button after using the device for example after a call.
thanks for sharing :wink:
I HAVE BEEN USING MY 4 YEARS OLD BLUESPOON.
WWW.NEXTLINK.TO
LOVE IT..
IN THE US YOU CAN GET IT AT SOME RADIO SHACK, THE LOWEND VERSION,
Tamoochin,
I have the Jabra BT500 and it does the same thing your headset does - If I hold down the button for one second on the BT500, it wakes up the phone and dials the last number dialed. Like you, I turn off the power on the phone after each call. If I lightly tap on the BT500 button, the Blue Angel wakes up, and the headset symbol shows up in the top bar on the phone.
This leads me to believe that the Blue Angel could be programmed to start voice command instead of do the redial. Does anyone know how to do this. I have a PH20A (xv6600 from Verizon). I have Verizon's latest ship ROM and I've added Broadcom's High Quality Stereo A2DP profile which works great with the Bluetake Iphono 450rx stereo bluetooth headset.
Someone out there must know how to go into the registry and change the redial command to start voice command.
i have the logitech mobile freedom. if the device is out of standby then it work perfect with one tap. if it is on standby i get one tap and it does nothing. two taps and it wakes the device and three taps and the voice command comes on. doesn't work perfect but it works.
Nokia HS-21W - works flawlessly...
//NoX
My HBH-662 and a Jabra BT200 both only work once per soft-reset. This is after a hard reset, only apps installed are Total Commander and Voice Command.
Also happens with three ROM revisions: The hacked O2 one, The Qtek 1671, and the new Qtek 208 with Push e-mail.
Maybe somehow we have different builds of Voice Command installed? My version number from the control panel applet is 1.50.4333.24.
I hope we can get to the bottom of this, Voice Command is a great tool, especially considering how unweildy the 9100 is to dial in the car.

Help with Bluetooth Headset!!

Sorry if you have already read this but I am still having a problem!!
I got the new Bluetake iphone mini stereo headphones for christmas and was hoping to use them with my MDA Pro (running the new O2 ROM).
I have them paired as a "Hands Free" device...
I know that I can't use the stereo features until the new A2DP patch come out (hopefully soon!), however what I want to be able to do is use voice command to initiate calls etc. However when I press the call/power or Play/Pause button all I hear is a beep from the headset and nothing hapens on the PDA...
However I can use the button to answer and hangup a call (as long as I answered it with the handset...) If I initiate the call on the MDA then I can't hangup with the headset...
Am I doing something wrong or does it sound like something is faulty??
Any advice?
Thanks
Andy.
I actually had an oportunity to try out the voice levels and sound is awful! I also tried to connect it to my SE T610 and it refused and it did the same when I tried to connect it to my Toshiba M200 tablet PC as in both cases it never asked for the passkey...
I am begining to think that they must be faulty??
But becuase I have never had a BT headset before so I'm not sure if I am doing something stupid!
Andy
I have managed to try a SE BT headset with my MDA Pro and it did work and activate voice command. So it would seem that the headset is faulty. Does anyone have any ideas before I send it back?
Andy
Please!! Is there anyone here who can comment on whether they think these are broken or if I am just incompetent!
If they are broken then I need to send them back really soon...
FWIW, my Jabra BT330 and the SE HBH-662 just need a single quick click to activate the voice dial, but these Plantronics Pulsar 590A things I just got (which are fandabidosi by the way!) need a prolonged press to do the same.
Have you tried keeping your finger on the button for a while?
Ferg.
andykemp said:
Sorry if you have already read this but I am still having a problem!!
I got the new Bluetake iphone mini stereo headphones for christmas and was hoping to use them with my MDA Pro (running the new O2 ROM).
I have them paired as a "Hands Free" device...
I know that I can't use the stereo features until the new A2DP patch come out (hopefully soon!), however what I want to be able to do is use voice command to initiate calls etc. However when I press the call/power or Play/Pause button all I hear is a beep from the headset and nothing hapens on the PDA...
However I can use the button to answer and hangup a call (as long as I answered it with the handset...) If I initiate the call on the MDA then I can't hangup with the headset...
Am I doing something wrong or does it sound like something is faulty??
Any advice?
Thanks
Andy.
Click to expand...
Click to collapse
Just looked at the instructions for the bluetake i-phone (bt450rx),
(got them myself for xmas)
and it does not say that you can connect to the phone for voice control,
however you should be able to hang up from the headset.
i have got the k-jam (wizard) and can dial from the k-jam and hangup from the headset.
voice control may not be available because the new bluetooth stereo headset's are ready for AVRCP (Audio Video Remote Control Profile).
the older bluetake headset bt420rx can be used for voice control but do not have AVRCP function.
I hope i am wrong, but it may be the answer you have not been looking for.
Hmm... That sounds bad...
I only have a few days left to return it and don't know whether to get a replacement or to go for a different headset?
i like the idea of being able to play/pause/f-foward/rewind via the headset(when bt v2 upgrade is available), because music playback is more important to me than voice dial.
of course if you can send it back, then perhaps just wait until bt v2 is available, and then buy a headset for the uses you require it for.(wish there was an emotion with cross eyes) LOL
I know what you mean but I would still be able to use voice command!!
Does anyone else have the 450Rx and a universal and could test it for me?
if you do prove me wrong (and i hope you do) please let me know.
answering this problem further,
the bluetake i-phono mini headset cannot be used for voice command,
however the motorola ht820 can be used for voice control.
Had similar issues with my headset (not the same type). In the end, I had enable secure mode on the universal, pair the devices, select serial port and then immediately initiate the voice dial, otherwise it didn't work.
Gareth
I decided to play it safe and returned it back to Expansys for a refund. When someone else gets a set of stereo headphones and A2DP is out... and crucially they can confirm it works! Then I'll buy a new one!
Cheers
Andy
one good thing with motorola ht820 is that they can be used with a detatchable cable, so whilst i'm using them bluetooth for the phone side, i can still hear good quality music.
also i know from trying them with my wife's qtek s110 that you can control windows media player as well.
you may have already tried this, but just in case you haven't,
install and run the three files for either "bt off", "bt on", or "bt toggle",
this will switch all audio to the bt headset or away,
of course quality is not good, but at least no cables.
ps. if the headset is switch off and you put bt on, you will get an on screen error message.
aliendad said:
one good thing with motorola ht820 is that they can be used with a detatchable cable, so whilst i'm using them bluetooth for the phone side, i can still hear good quality music.
also i know from trying them with my wife's qtek s110 that you can control windows media player as well.
Click to expand...
Click to collapse
Do they come with this cable as standard?
EDIT: Did a search, and they do.... might just buy them now and sell my Sony EX-71's.... would they we at least the same in terms of sound quality? It's the thing people talk about least with these devices!
So lemme see if I got this right.... even before I get A2DP installed on my Exec, I can listen to perfect music using the cable, and also use the hphones as a bluetooth headset as well? Will the music still pause etc when a call comes in?
Just bought a pair of HT820's on Ebay there.... £38, not too bad. Should get about £25-30 for two pairs of existing headphones, so well please.

Microsoft Voice Command 1.6?

Do any of you have MSFT VC 1.6 installed on the Advantage? I know there were many issues with this software app and the TYTN (such as notifications through speaker and being forced to apply a major registry settings tweak). Can someone confirm that using MSFT VC 1.6 works perfectly with the Advantage or if there are similar problems like with the TYTN?
Thanks
fpbiii said:
Do any of you have MSFT VC 1.6 installed on the Advantage? I know there were many issues with this software app and the TYTN (such as notifications through speaker and being forced to apply a major registry settings tweak). Can someone confirm that using MSFT VC 1.6 works perfectly with the Advantage or if there are similar problems like with the TYTN?
Thanks
Click to expand...
Click to collapse
it works perfectly on my DOPOD U1000, no problem at all!
wu5262 said:
it works perfectly on my DOPOD U1000, no problem at all!
Click to expand...
Click to collapse
I copy that! Work like a charm on my Ameo.
Yup, it all works perfectly on my Ameo, even issuing commands thru bluetooth is working fine, which was a pig to sort out on the Universal.
Can you please tell me how you got your msft 1.6 voice command working? My audio still routes through to the speaker, not the BT headset. Do you have to do anything to get it working?
I went through all the other forums about this, nothing works.
~Sigh~
I installed it - and it all worked, no tweaking required.
Have you set the "Notifications" settings to direct the audio to Bluetooth only?
What about Voice Command 1.5?
Has anyone got 1.5 to work?
When I try, I just get "Voice Command has encountered a problem. Restart Voice command and try again"
I've tried installing it both to Main Memory, and Microdrive. I've tried resetting it both before and after installing.
No joy.
Anyone else have more luck?
dalelane said:
Has anyone got 1.5 to work?
When I try, I just get "Voice Command has encountered a problem. Restart Voice command and try again"
I've tried installing it both to Main Memory, and Microdrive. I've tried resetting it both before and after installing.
No joy.
Anyone else have more luck?
Click to expand...
Click to collapse
I have had same issue with v1.5 going to try v1.6 hope it works ok
Doesn't really work on my Advantage. Works just like it did on the Tytn.
Activating MSVC thru headset works. All audio comes thru speaker phone. Notifications do not go thru headset only thru speakerphone
And yes, I have notifications set to onlu bluetooth..Oh Well
eagle 1 said:
Doesn't really work on my Advantage. Works just like it did on the Tytn.
Activating MSVC thru headset works. All audio comes thru speaker phone. Notifications do not go thru headset only thru speakerphone
And yes, I have notifications set to onlu bluetooth..Oh Well
Click to expand...
Click to collapse
strange mine one works.....didn't change anything
Mine works flawlessly through bt when initiated from the device. However, I am unable to initiate with my Jabra BT8010
I found out that if I uncheck the Password Protected box in MSVC settings' dialogue that it works fine.
activate Voice Command via BT Headset?
Can you activate the BT via the BT headset? I remember trying one long itme ago on a Blue Angel and I had to configure a button on the device to activate it. Does it work there?
Thank you.
delsolman said:
Can you activate the BT via the BT headset? I remember trying one long itme ago on a Blue Angel and I had to configure a button on the device to activate it. Does it work there?
Thank you.
Click to expand...
Click to collapse
it works on mine, by just pressing a button on my bluetooth headset
victoradjei said:
Mine works flawlessly through bt when initiated from the device. However, I am unable to initiate with my Jabra BT8010
Click to expand...
Click to collapse
Have you changed the mode to phone on you BT8010s? Otherwise it just keeps playing/pausing your music.
Works perfectly on the three x7500's I purchased. ;-)
I've been using the Mocrosoft voice commnd v.1.6 for a few weeks now. I have the US version, which unfortunately have a different dialing rule from ours in Australia. So, you can't use the dial funtion - only the call funtion would work in Australia. For those not familiar, "dial command" is supposed to let you dial a number. whereas "call command" lets you call a contact by name or nick name in your address book. The numbers, to be acceptable and recognised by the dial command must be one of the following formats:
nnn-nnnn
nnn-nnn-nnnn
1-nnn-nnn-nnnn
n-1-1
international dialing with a + or 0 prefix.
I was puzzled as to why I was unable to use the dial command, and to me a while to realise the limitation.
I heard from other forum participant that he has used the UK version, which allow him to dial the australisan numbers.
If you use this product, could you kindly look into the help file under tips for making calls and list all the number formats acceptable to the UK versions please?
Thanks
Have now purchased VC 1.6 German - disappointed....
In my car I have an FWD audio com car kit - no audio comes from the car kit. Everything is going throug Ameo speaker and mic. Therefore impossible to use in car while driving.
Settings: password unchecked, BT only.
What can I do ?
Dieter
dieterpapa said:
Have now purchased VC 1.6 German - disappointed....
In my car I have an FWD audio com car kit - no audio comes from the car kit. Everything is going throug Ameo speaker and mic. Therefore impossible to use in car while driving.
Settings: password unchecked, BT only.
What can I do ?
Dieter
Click to expand...
Click to collapse
Is your BlueTooth turned on? Is your car kit paired using the Hands-free profile?
TO CHECK:
In Comm Manager, go to Setting menu and select BlueTooth.
In "Mode" tab, made sure BT is on!
In "Devices" tab,
* If it shows in the list tap on it and see whether Hands Free is enabled.
* If it does not show, tap "Add New Device..." and follow the steps.

x7500 phone experience...

Mine should be arriving tomorrow
What are you guys using for phone calls: the included wired earbud, bluetooth headset or just the speakerphone?
Do most bluetooth headsets out there work with the included bluetooth stack?
Thanks!
Bluetooth all the way!
I am using the Plantronics Voyager 510 headset works the best for me great battery life, volume etc.
Bluetooth 99% of the time, rarely use the speakerphone. (Which does, however, work well.)
I use the BlueAnt V12, which has a vibrate feature... which is userful since the phone doesn't have one built-in. It also has an LCD, which I find useful. Displays status, phone numbers, but no names. But I seem to know most numbers, and if I don't that's also informative.
BlueAnt V12 has also a great price, around $50.
Jawbone Bluetooth works great.
I have no problems with the Jabra BT800, which also has vibrate, lcd and 6 individual ringtone settings plus the one from the Ameo. Works flawlessly.
Tim
ww?.limitz.net
Excellent!
So if my BT headset goes dead, the x7500 will continue fine as a phone? Will the speakerphone be automatically activated whenever I initiate/receive a call?
andresp said:
Excellent!
So if my BT headset goes dead, the x7500 will continue fine as a phone? Will the speakerphone be automatically activated whenever I initiate/receive a call?
Click to expand...
Click to collapse
If there is no headset connected wired/bluetooth speakerphone is automatically activated for a call.
fatouraee said:
Jawbone Bluetooth works great.
Click to expand...
Click to collapse
But not if you use Microsoft Voice Command 1.6. That kills the Jawbone d.e.a.d.
Aliph have confirmed it's a MVC problem.
Kevin
andresp said:
Excellent!
So if my BT headset goes dead, the x7500 will continue fine as a phone? Will the speakerphone be automatically activated whenever I initiate/receive a call?
Click to expand...
Click to collapse
Yes. It takes about 5 seconds for the X7500 to realise there's no active BT connection and reroute to the speakers.
andresp said:
Mine should be arriving tomorrow
What are you guys using for phone calls: the included wired earbud, bluetooth headset or just the speakerphone?
Do most bluetooth headsets out there work with the included bluetooth stack?
Thanks!
Click to expand...
Click to collapse
Jabra BT8010. Works perfectly. Works even better if you upgrade the Jabra to 1.33 and follow the instructions elsewhere on the forum to get caller ID
apd said:
Jabra BT8010. Works perfectly. Works even better if you upgrade the Jabra to 1.33 and follow the instructions elsewhere on the forum to get caller ID
Click to expand...
Click to collapse
I have some problem with BT8010. The phone function is perfect, but i have problem with stereo function. The playback is clogging and the memories getting fall with wm player. Have you got any reason? I tried it with TCPMP, it's same problem, but memories dont fall.
(sorry my bad english!)
Zatesz said:
I have some problem with BT8010. The phone function is perfect, but i have problem with stereo function. The playback is clogging and the memories getting fall with wm player. Have you got any reason? I tried it with TCPMP, it's same problem, but memories dont fall.
(sorry my bad english!)
Click to expand...
Click to collapse
Sorry, works perfectly for me. Anyone else have any ideas?
bt
i use bluetooth most of the tyme wen out...although speakerfone quality is also pretty good...one way to use it as an earpiece is to make the volume REAL LOW...and then out it to the ear...although still some sound duz appear to the outside...!
kevinnugent said:
But not if you use Microsoft Voice Command 1.6. That kills the Jawbone d.e.a.d.
Aliph have confirmed it's a MVC problem.
Kevin
Click to expand...
Click to collapse
Thanks for the warning. I am just about to try 1.6 on my Jawbone.
Found this comment here - http://www.wmexperts.com/reviews/bluetooth_headsets/review_aliph_jawbone_bluetooth.html
Try creating the registry key:
HKLM\software\microsoft\voice command\speech\BluetoothPTTDelay
value = dword: 2000
Stop and start Voice Command.
I have found that this makes Voice Command 1.6 work great with the Jawbone even in the noisiest enviornments. This will open up the audio channel for 2 seconds before starting a voice command interaction as opposed to the 400ms that is the default. I think possibly the Jawbone is adapting to the ambient noise during this time. This seems to make a big difference though.
Let me know if this helps as my Jawbone will be arriving shortly.
Anyone used a stereo headset and liked it? I wouldn't mind having one that would go one ear for calls and a simple way to use both for listening to music/movies.
Pantaloonie said:
Found this comment here - http://www.wmexperts.com/reviews/bluetooth_headsets/review_aliph_jawbone_bluetooth.html
Try creating the registry key:
HKLM\software\microsoft\voice command\speech\BluetoothPTTDelay
value = dword: 2000
Stop and start Voice Command.
I have found that this makes Voice Command 1.6 work great with the Jawbone even in the noisiest enviornments. This will open up the audio channel for 2 seconds before starting a voice command interaction as opposed to the 400ms that is the default. I think possibly the Jawbone is adapting to the ambient noise during this time. This seems to make a big difference though.
Let me know if this helps as my Jawbone will be arriving shortly.
Click to expand...
Click to collapse
Why do you need to go through all athat gymnastics? I just installed voice command and it worked with Jawbone without any issues. I can't complain about battery life because I use my jawbone and Athena as regular phone, even in my open office. Maybe total 2 hours +- 30 minutes. Don't need 6 hours talk time yet I have never run out of battery yet. I charge both devices every night.

Tilt, AT&T Stock ROM, Microsoft Voice, and Bluetooth which work - PLZ Recommend

Greetings,
I have reviewed the Bluetooth vs. AT&T Tilt vs. Microsoft Voice threads, and cannot find a specific answer, so I am going to try to ask a narrow question here ...
... does anyone who has (i) AT&T Tilt with (ii) the AT&T ROMs, (iii) Microsoft Voice, and (iv) a Bluetooth Headset have all 4 working perfectly together? I need to buy a bluetooth headset, and the forums are littered with problems with Voice announcing, or problems answering the phone thru the headset, etc.
That's why I am just hoping to hear from someone who has all 4 of these things ... that work together. Any recommendations for the bluetooth headset are appreciated.
Thanks
My Tilt worked great with the stock ROM, MSVC 1.6.17913 and my BlueAnt Z9 worked flawlessly including announcing calls over BT.
Thank you!
I will look into the BlueAnt Z9. Thank you so very much for responding.
Of course ... if anyone else has the combination of stock tilt/voice/bluetooth, please let me/us know what other adapters might also work.
I did not have any issues with the Motorola H700 and MSVC 1.6.17913 on my Tilt.
H700
Andre - I recall seeing some mention of the H700 on other threads. Can you (please) confirm that you can answer the phone thru the bluetooth, and that call announce works?
jdmba said:
Andre - I recall seeing some mention of the H700 on other threads. Can you (please) confirm that you can answer the phone thru the bluetooth, and that call announce works?
Click to expand...
Click to collapse
I keep my unit on vibrate and ring and this is the way I tested it. I first placed a call using my office phone to my mobile handset in the "vibrate only" and "vibrate and ring" modes. When my mobile handset was on vibrate the notification came through to my headset with audible tones and my mobile vibrated, but no voice announce from MSVC was heard. When I switched the handset to normal vibrate and ring mode (assume this works on ring w/o vibrate as well) MSVC announced the caller through the headset and nothing audible was heard through the handset. I would say this headset is 100% compatible with the Tilt and MSVC.
Bought the Z9
My Z9 arrived today, and it does answer the phone, engage in voice command, etc.
Pretty nifty (but expensive) bluetooth.
Thanks!
Glad you like it. I hope you give us a nice reveiw after you play with it for a while. I am contemplating moving up because I have had this same type of headset for years now HS810, HS820, HS850, and the H700.
I've got AT&T Tilt, Stock ROM, MS Voice Command 1.6.17913 and Samsung WEP200 all working together.
Also, in MS Voice Command, there are options to select the source the phone calls are made from.
Go to "Start" > "Settings" > "Voice Command"
Click. "Notifications" button and the options that come up are...
-Announce notifications using Bluetooth hands free only
-Announce notifications using Bluetooth hands free if available
-Announce notifications through device speaker or wired headset only.
v 1.6 nad jabra
i still cant get it all to work on my tilt like my 8125...8126 was the bomb with vc. tilt is so nice but not with vc
I tried out a plantronics 665 the seemed to work well, but I didn't care that much for the headset. Returned it and got a nxZen nx9000, and it doesn't seem to work with voice command. Not sure why one works and not the other. Anyone care to speculate, or state with authority, why the 2nd headset doesn't work? Thanks.
Anybody knows how Logitech Mobile Pro Headset works with this combo?
Thanks
http://www.logitech.com/index.cfm/webcam_communications/mobile_phone_headsets/devices/536&cl=roeu,en
Is the Jawbone working with all this? I broke my last Jawbone, but would definatele get another, assuming it would work.
My Jawbone works with my Tilt with the stock ROM. Make sure you install VC before you pair your phone with the headset. If you already paired, delete the pairing and re-pair after the install.
Thank you much.
Now I've got another issue, somebody said "BLUEant" and I saw went looking... I like Blue
Trying to decide between the Z9 or another Jawbone. Comparitively they're about the same with the Z9 being the smaller and more "attractive" of the two, and it also costs alot less. Not to mention it's firmware can be update.
But the big plus for me is that it's BT 2.0 BT 2.0 + Firmware upgradeability make it a serious contender in my book. The Jawbone is in it's prime... whereas the Z9 could get better.
Can't decide at the moment...
I also have the Tilt and Jawbone working together but does anyone know if it is possible to issue the voice commands via the headset. I can only talk into the phone to make it dial a name and then the call is directed to the bluetooth headset.
has anyone got this to work all through the headset.
I couldn't imagine it not being possible... I managed to use the Jawbone with the RAZR V3 in or to use voice dialing and it worked decently.
Jawbone and voice dial
Have had a Jawbone paired with my tilt since I bought it. Works perfectly except calls are not announced through the bluetooth, but important e-mail subjects are read through the headset when they arrive.
The Jawbone is sometimes awkward because it gets loose on your ear/cheek if you move your head alot and then sounds like your talking through a long tube.
Thinking about trying blueant, but haven't heard any glowing reports yet.
W_P_L said:
Have had a Jawbone paired with my tilt since I bought it. Works perfectly except calls are not announced through the bluetooth, but important e-mail subjects are read through the headset when they arrive.
The Jawbone is sometimes awkward because it gets loose on your ear/cheek if you move your head alot and then sounds like your talking through a long tube.
Thinking about trying blueant, but haven't heard any glowing reports yet.
Click to expand...
Click to collapse
There are plenty of fantastic reviews for the BlueAnt Z9. It seems to me to be just the same as when I was researching the Jawbone. You'll either love it, or you'll hate it.
The big plus to me with the BlueAnt is that it's warranty is fantastic (2 years compared to the Jawbone's very specific 1 year warranty), it's BlueTooth 2.0 Stereo (should result in better sound quality as I plan to use my Kaiser as my MP3 player as well), and the big plus for me is that its firmware can be updated. Thanks to the firmware, the Z9's limitations are moreso a limit of it's firmware than it's hardware, whereas the Jawbone is fixed.
With that said, I loved my Jawbone... and I'll still be using my current one while it's still functioning (it's falling apart... Jawbones aren't very well built I'll say that) and comparing it to my Z9 when it gets here.
URPREY said:
My Tilt worked great with the stock ROM, MSVC 1.6.17913 and my BlueAnt Z9 worked flawlessly including announcing calls over BT.
Click to expand...
Click to collapse
Hi URPREY - I have the same setup (with the official ATT ROM update 1.62.502.0) working, but instead of announcing the callerid info, I'm hearing "please answer or not at home" through my Blueant Z9 via my Tilt. Any ideas?

Categories

Resources