Mine should be arriving tomorrow
What are you guys using for phone calls: the included wired earbud, bluetooth headset or just the speakerphone?
Do most bluetooth headsets out there work with the included bluetooth stack?
Thanks!
Bluetooth all the way!
I am using the Plantronics Voyager 510 headset works the best for me great battery life, volume etc.
Bluetooth 99% of the time, rarely use the speakerphone. (Which does, however, work well.)
I use the BlueAnt V12, which has a vibrate feature... which is userful since the phone doesn't have one built-in. It also has an LCD, which I find useful. Displays status, phone numbers, but no names. But I seem to know most numbers, and if I don't that's also informative.
BlueAnt V12 has also a great price, around $50.
Jawbone Bluetooth works great.
I have no problems with the Jabra BT800, which also has vibrate, lcd and 6 individual ringtone settings plus the one from the Ameo. Works flawlessly.
Tim
ww?.limitz.net
Excellent!
So if my BT headset goes dead, the x7500 will continue fine as a phone? Will the speakerphone be automatically activated whenever I initiate/receive a call?
andresp said:
Excellent!
So if my BT headset goes dead, the x7500 will continue fine as a phone? Will the speakerphone be automatically activated whenever I initiate/receive a call?
Click to expand...
Click to collapse
If there is no headset connected wired/bluetooth speakerphone is automatically activated for a call.
fatouraee said:
Jawbone Bluetooth works great.
Click to expand...
Click to collapse
But not if you use Microsoft Voice Command 1.6. That kills the Jawbone d.e.a.d.
Aliph have confirmed it's a MVC problem.
Kevin
andresp said:
Excellent!
So if my BT headset goes dead, the x7500 will continue fine as a phone? Will the speakerphone be automatically activated whenever I initiate/receive a call?
Click to expand...
Click to collapse
Yes. It takes about 5 seconds for the X7500 to realise there's no active BT connection and reroute to the speakers.
andresp said:
Mine should be arriving tomorrow
What are you guys using for phone calls: the included wired earbud, bluetooth headset or just the speakerphone?
Do most bluetooth headsets out there work with the included bluetooth stack?
Thanks!
Click to expand...
Click to collapse
Jabra BT8010. Works perfectly. Works even better if you upgrade the Jabra to 1.33 and follow the instructions elsewhere on the forum to get caller ID
apd said:
Jabra BT8010. Works perfectly. Works even better if you upgrade the Jabra to 1.33 and follow the instructions elsewhere on the forum to get caller ID
Click to expand...
Click to collapse
I have some problem with BT8010. The phone function is perfect, but i have problem with stereo function. The playback is clogging and the memories getting fall with wm player. Have you got any reason? I tried it with TCPMP, it's same problem, but memories dont fall.
(sorry my bad english!)
Zatesz said:
I have some problem with BT8010. The phone function is perfect, but i have problem with stereo function. The playback is clogging and the memories getting fall with wm player. Have you got any reason? I tried it with TCPMP, it's same problem, but memories dont fall.
(sorry my bad english!)
Click to expand...
Click to collapse
Sorry, works perfectly for me. Anyone else have any ideas?
bt
i use bluetooth most of the tyme wen out...although speakerfone quality is also pretty good...one way to use it as an earpiece is to make the volume REAL LOW...and then out it to the ear...although still some sound duz appear to the outside...!
kevinnugent said:
But not if you use Microsoft Voice Command 1.6. That kills the Jawbone d.e.a.d.
Aliph have confirmed it's a MVC problem.
Kevin
Click to expand...
Click to collapse
Thanks for the warning. I am just about to try 1.6 on my Jawbone.
Found this comment here - http://www.wmexperts.com/reviews/bluetooth_headsets/review_aliph_jawbone_bluetooth.html
Try creating the registry key:
HKLM\software\microsoft\voice command\speech\BluetoothPTTDelay
value = dword: 2000
Stop and start Voice Command.
I have found that this makes Voice Command 1.6 work great with the Jawbone even in the noisiest enviornments. This will open up the audio channel for 2 seconds before starting a voice command interaction as opposed to the 400ms that is the default. I think possibly the Jawbone is adapting to the ambient noise during this time. This seems to make a big difference though.
Let me know if this helps as my Jawbone will be arriving shortly.
Anyone used a stereo headset and liked it? I wouldn't mind having one that would go one ear for calls and a simple way to use both for listening to music/movies.
Pantaloonie said:
Found this comment here - http://www.wmexperts.com/reviews/bluetooth_headsets/review_aliph_jawbone_bluetooth.html
Try creating the registry key:
HKLM\software\microsoft\voice command\speech\BluetoothPTTDelay
value = dword: 2000
Stop and start Voice Command.
I have found that this makes Voice Command 1.6 work great with the Jawbone even in the noisiest enviornments. This will open up the audio channel for 2 seconds before starting a voice command interaction as opposed to the 400ms that is the default. I think possibly the Jawbone is adapting to the ambient noise during this time. This seems to make a big difference though.
Let me know if this helps as my Jawbone will be arriving shortly.
Click to expand...
Click to collapse
Why do you need to go through all athat gymnastics? I just installed voice command and it worked with Jawbone without any issues. I can't complain about battery life because I use my jawbone and Athena as regular phone, even in my open office. Maybe total 2 hours +- 30 minutes. Don't need 6 hours talk time yet I have never run out of battery yet. I charge both devices every night.
Related
go to hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
when activating voicedial from your headset (press connect button at the headset 2 sec.) it diverts all audio to the bluetooth.
works also with musik.
pressing the button again it disconnects the bluetooth and the main speakers are active again.
in this case the original voice dial does not work anymore until you change the value back to 1.
for me a good solution because i don't use voice dial and prefer insted skype and headset.
Very good tip...will try that!
Cheers...!
Works on QTEK S100 with Jabra Bt 250 Headsets?
Do you happen to know if the BT specification of the EXEC allows it to transmit stereo audio? Say from a mediaplayer to a BT car kit?
If so, that would send me over the edge and Id have to buy a BT carkit!
...ohh, on 2nd thoughts, it would also depend on the bandwidth too. Anyone know what sort of frequency range BT stereo may be limited to?
for stereo output is another reg.hack needed i think. because pushing the voicedial button at the handset it activates the bluetooth headset profile for listening to the voice but voicedial doesnt start. so you can use it for normal micro and loudspeaker.
maybe anybody knows how to activate in this case the "high quality audio profile" by editing the registry instead of "headset profile"?
Great job, The sound (in music) is good ? i tested this but the sound wasnt good.... I think my headset isnt good for music.
yes it depends on the bluetooth profile. for good quality "high quality audio" (A2DP) profile is needed.
blueangel
would this work on a blueangel running WM5?
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
hdubli said:
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
Click to expand...
Click to collapse
No it does not work in QTEK s100....
Works -but not great
very tinny muffled sound on my moto HT 820, was hoping it would work as well as the bluetooth stack update for the magician.
Sound does come out in both ears on my stereo phones. but I dont desire to listern to the tinny sound.
Still great find and discovery. Just hope someone can progress it to A2DP asap.
sorry, but can anybody tell me how to edit the registry in WM5? I never did it before. What tool do you guys use? Is it something free?
Thanks.
I used PHMREGedit
Here's the link:
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
andyes....it's free.
Tried it with my BT200
I know the registry works....but cannot get it to play on the headset.
It works...becos upon pressing the phone button on the head set for 2 sec, the audio comes from the handset. On redoing it again, the audio goes off from the handset.
Mine is working fine. I really like the way its now.
Thanks a lot.
Ooops....
my Bt200 wasn't working. That's why there was no audio coming from it.
Need to figure out why there is no audio coming from the headset.
Sigh another problem!
So basically, the registry works.
Im using Total Voice COmmander and it works with WMP.. No need to install another software to play music thru BT.
I just press my Jabra headset twice and it goes "Say Command".. then I say "Play a music"..
Sometimes it's stubborn and Calls someone or Says "Today you have no Appointment" but I guess with a lot of practice, my Dopod understood what Im saying and played me a song.. Now, Im having trouble with my Dopod catching the title of the song i want it to play. I've placed voice tags on the songs and 50% of the time, my dopod got it right.. got to work on the other 50% though..
The btagsvc.dll on the Universal does exist, but it is empty (same with the HID dll). So that may be the reason why Audio Gateway is not working (getting the system sound forwarded to the BT headset).
Now, a friend showed me an interesting trick. Run a music file or any other program that outputs sound (like a navigation instruction from TomTom) and then press the Speed Voice Dial button.
Interesting, isn't it? So maybe all we need to do is prevent SpeedVoiceDial from exiting again?
Hey!!!!
A2DP is already there...just do a search :lol:
hdubli said:
Hey!!!!
A2DP is already there...just do a search :lol:
Click to expand...
Click to collapse
If you're talking about the M$ stack on the Universal, then you'll have to elucidate a bit more than that - unless you mean:
"The A2DP profile is introduced in AKU 2.0 of Windows Mobile".
But then isn't that scheduled for first quarter 2006. Even then, surely it's down to HTC to make it available for the badging suppliers, o2, T-mobile, etc., to decide IF and WHEN to issue the update.
I tried the LaunchAPEnable = 0 registry hack but it won't stick. My Jabra 110 headset would only receive the audio for a few seconds and then it would all fall back into the Xda Exec. I'll try another headset just to be sure but I'd have to agree - this seems far from being solved.
EDIT: indeed it works with another headset (Solteras Halo). Is the Jabra too agressive in it's power saving quest?
nice to see its doing you head in master :lol: :lol: the jabra bt250 is the same as is my logtech and motorola bluespoon 3-4 secs via voice dial and nothing
nice to see its doing you head in master :lol: :lol: the jabra bt250 is the same as is my logtech and motorola bluespoon 3-4 secs via voice dial and nothing
I've been using a bluetooth headset (Jabra BT-800) to listen to audio books just fine on the JarJar Universal. There are two ways (so far) to get it to work. One, if you install Microsoft Voice Command and use the registry hack found in this forum to make it the default via the Voice Dial button, run it, then let it cancel on its own, the BT audio connection stays intact for running regular audio through it.
The second (and free) way is to use a utility found in the I730 forum in pdaphonehome.com called BTAudioToggle. Written for the I730, it works on the Universal too. I imagine it will work on all the flavors of the Universal. Connecting your BT headset, followed by running this BT app will also activate the BT audio connection. Its pretty rock solid though its mono, not A2DP
Nice application but it only works for Universal for a few seconds. Then it returns to the device with the voice dial application activated.....
So, it seems that I have to disable the voice dial application. Anyone knows how????
Thanks in advance.
Cheers,
I tried the BTAudioToggle on the Xda Exec, and it doesn't seem to do anything .
@chris_khho: try a different headset. As I wrote the Solteras Halo was working fine with the registry hack but the Jabra 110 would only work for a few seconds. I'll need to check what profiles each of them suports.
RE
Hi!
BTAudioTogggle works on my QTEK 9000 for a few seconds when Voice Speed Dial is activated. Once Voice Speed Dial ends the music transfer stops
:roll:
Mine works fine and I've played my audio books for more than an hour and it never dropped. I'm not sure why it doesn't work for you guys. Maybe the reason the BTAudio hack works is because the MS Voice Command setup is installed and the BTAudio hack just makes use of it.
You know, now that I think of it, I have an I730 too and before the BTAudio hack came out, I was already using MS Voice Command to activate audio over BT. I think there's a (good) bug in Voice Command where VC does not release the audio stream if you activate it, then don't give it any commands. The BTAudio hack just made it easier to activate.
OK I see.
I tried this:
hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
And it works with my i-tech clip s and jabra 258 (not sure the model no.), and WMP but it doesnt revert to BT headset after finished call....
Yes it is "mono" but its good though....just wait for AD2P..... Many people are working on it I think.....
Great People Great Work!!!!
Cheers,
Any more info on what each update fixes.
Of particular interest is the bluetooth patch????
Ok I see.
I tried this:
hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
And it works with my i-tech clip s and jabra 258 (not sure the model no.), and WMP but it doesnt revert to BT headset after finished call....
Yes it is "mono" but its good though....just wait for AD2P..... Many people are working on it I think.....
Great People Great Work!!!!
Cheers,
_________________
Chris
Thanks Chris,
I have a o2 exd exec with the h500 and this works perfictly
Jeff
After reading very long threads about this issue, many changes in the registry and some full pda restores, I haven´t found the way to redirect all the sounds to the handsfree in my TRINITY.
Has anyone managed to make BTAudio or any other program work with a Trinity?
I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.
2 Types of Redirect
One is with A2DP where the bt device is compliance to it. I do not have one but I believe it will work fine.
Another way which I am using is via the Handsfree Voice Command channel. When a voice command software(Such as Cyberon Voice Speed Dial) is installed and when the recognition is triggered(usually by a button on headset), all audio is redirected to the the headset.
So the trick is to keep this redirection longer.
This is can achieved by changing two registry settings.
- Change the duration to something longer, like FFFF.
- Invalidate the voice command software execution.
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand]
"VoiceCmdDuration"=dword:FFFF
"Path"="\WINDOWS\invalid_sddialer.exe"
With that, I have lost Voice command via my headset but I hardly do VC at all, and if needed, I had associated one of the button on my dopod to launch VC but I need to speak into the phone instead.
Not sure if this is the best way but it's the only way I know of untill I figure out other.
FYI, I'm currently using Dopod D810 with lvsw ROM (http://forum.xda-developers.com/showthread.php?t=299771) and a Motorolla H700.
anonimo said:
I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.
Click to expand...
Click to collapse
Hello,
I agree with this.
I had not been able to get the Trinity to redirect audio to a sony HBH-IV835 heandfree device.
Since I've change for a Sony DR-BT20NX headset with AD2P profile it's working like a charm. No more registry hack or software needed.
Then registry hack only concern improvement of audio quality (bitpool and so on).
Sadly i'm not able to use real stereo (replace the use of joint stereo) because it's generationg a slight annoying hiss sound.
Is this still the status, also with WM6?
I can't believe it's not possible to redirect some kind of way like I've been reading in the Tornado treads.
Yeah, I'm also can't redirect all sound to my headset (Plantronics Pulsar P590) by one click or by launch some program. Every time I need launch BT Settings, open Devices tab, tap'n hold on "590Plantronics", and select "Set as hands-free" or "Set as Wireless audio".
Can't find other ways to do it - no registry hacks, no other...
Does this help maybe?
http://pocketland.de/product.php?prod_id=36311
I did not test it yet...
No, it doesn;t work too... All discussed programs (BTARouter, BTAudioNav, BTAudioToggle) are just redirect phone calls to the my headset. No audio output at all (headset icon doesn't appear).
Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.
clinton said:
Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.
Click to expand...
Click to collapse
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...
peon said:
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...
Click to expand...
Click to collapse
I saw a lot of different registry hack around here..
The one thath works on p3600 is?
I've tried a lot of but no one works.
I dont't need voice dial so it can be good.
I use my p3600 with a BT Helmet.. so I'd like to listen to tom tom inside..
thanks a lot.
Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.
jaaphooi said:
Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.
Click to expand...
Click to collapse
But my bike helmet is not A2DP compliant so I canìt use it.. :-(
Still no solution?
Hi you all,
is there still no solution for the Trinity?
I am actually experiencing the skipping problem, but I would be half-glad if I could redirect audio in mono to the headset.
Please advise!
IsiT_de...
Get headset that supports A2DP profile and it works fine. I have Plantronics Voyager 855 stereo, and it works flawlessly in mono or stereo mode with modifying any registry hacks. Music sounds awesome too with this headset, just like my bose earbud phones.
My U1000 has been upgraded to WM6. Everything goes smoothly. But I discovered my Jabra 250 bluetooth headset only responds to the phone function of the device. The music or voice from TextSpeech Pro does not come from Jabra 250 but from the speaker of the device. Does anyone has the same problem? Does anyone know how to fix this problem?
have a look at this:
http://www.freewareppc.com/communication/bluetoothaudio.shtml
i haven't tried it out myself because im still waiting for my new bt headset (a jabra 250v)
mojo2000 said:
have a look at this:
http://www.freewareppc.com/communication/bluetoothaudio.shtml
i haven't tried it out myself because im still waiting for my new bt headset (a jabra 250v)
Click to expand...
Click to collapse
Thank you mojo2000, it is the exact software that I have sought out. It works on U1000 like a charm.
After install this app, the buttom on the blue tooth headset to activate the voice command has disappeared, and the function to activate the voice command can not revive even though to uninstall the app and soft rest. I think the function to activate the voice command has to come back with a hard reset May be Jabra 250 is an old model which I bought it about 3 years ago. Hi, friends, whether newer models of Jabra have this problems or not. If newer model does not have this problem, may be it's time for me to buy newer model of Jabra.
panvita said:
After install this app, the buttom on the blue tooth headset to activate the voice command has disappeared, and the function to activate the voice command can not revive even though to uninstall the app and soft rest. I think the function to activate the voice command has to come back with a hard reset May be Jabra 250 is an old model which I bought it about 3 years ago. Hi, friends, whether newer models of Jabra have this problems or not. If newer model does not have this problem, may be it's time for me to buy newer model of Jabra.
Click to expand...
Click to collapse
I use the Jawbone and tested with it this morning. While the program is active, the button press does not activate MS voice command. De-activated and immediately tried again without success(pop-up came but sound was not heard and command was not taken by VC), but after about 10 seconds tried again and VC workd again with the program exited.
victoradjei said:
I use the Jawbone and tested with it this morning. While the program is active, the button press does not activate MS voice command. De-activated and immediately tried again without success(pop-up came but sound was not heard and command was not taken by VC), but after about 10 seconds tried again and VC workd again with the program exited.
Click to expand...
Click to collapse
The forum http://www.trianglepowers.com/PPC/Posts.aspx?TopicID=23 has received a lot of reports saying that this app breaks the ceberon speed dial program which is embeded in U1000. I wonder whether there is any blue tooth headset can transmit all sounds from the handset to the headset without installing the blue tooth audio app?
panvita said:
The forum http://www.trianglepowers.com/PPC/Posts.aspx?TopicID=23 has received a lot of reports saying that this app breaks the ceberon speed dial program which is embeded in U1000. I wonder whether there is any blue tooth headset can transmit all sounds from the handset to the headset without installing the blue tooth audio app?
Click to expand...
Click to collapse
Jabra 8010 does it, plus music even on one (mono) configuration.
mojo2000 said:
have a look at this:
http://www.freewareppc.com/communication/bluetoothaudio.shtml
i haven't tried it out myself because im still waiting for my new bt headset (a jabra 250v)
Click to expand...
Click to collapse
mojo2000, i am waiting for your report for trying jabra 250v because i like its design.
once I got it, i'll post a short report — promised
mojo2000 said:
once I got it, i'll post a short report — promised
Click to expand...
Click to collapse
mojo2000, i am waiting for your report for trying jabra 250v because i like its design.
Okay,
I already posted a report to a german ppc-board,
and I'm going to post the english version here later today.
http://www.ppc-welt.info/community/showthread.php?t=115535
Short Review of my Jabra BT 250v
Review (one day later) as promised here:
http://forum.xda-developers.com/showthread.php?p=1450165#post1450165
Greetings,
I have reviewed the Bluetooth vs. AT&T Tilt vs. Microsoft Voice threads, and cannot find a specific answer, so I am going to try to ask a narrow question here ...
... does anyone who has (i) AT&T Tilt with (ii) the AT&T ROMs, (iii) Microsoft Voice, and (iv) a Bluetooth Headset have all 4 working perfectly together? I need to buy a bluetooth headset, and the forums are littered with problems with Voice announcing, or problems answering the phone thru the headset, etc.
That's why I am just hoping to hear from someone who has all 4 of these things ... that work together. Any recommendations for the bluetooth headset are appreciated.
Thanks
My Tilt worked great with the stock ROM, MSVC 1.6.17913 and my BlueAnt Z9 worked flawlessly including announcing calls over BT.
Thank you!
I will look into the BlueAnt Z9. Thank you so very much for responding.
Of course ... if anyone else has the combination of stock tilt/voice/bluetooth, please let me/us know what other adapters might also work.
I did not have any issues with the Motorola H700 and MSVC 1.6.17913 on my Tilt.
H700
Andre - I recall seeing some mention of the H700 on other threads. Can you (please) confirm that you can answer the phone thru the bluetooth, and that call announce works?
jdmba said:
Andre - I recall seeing some mention of the H700 on other threads. Can you (please) confirm that you can answer the phone thru the bluetooth, and that call announce works?
Click to expand...
Click to collapse
I keep my unit on vibrate and ring and this is the way I tested it. I first placed a call using my office phone to my mobile handset in the "vibrate only" and "vibrate and ring" modes. When my mobile handset was on vibrate the notification came through to my headset with audible tones and my mobile vibrated, but no voice announce from MSVC was heard. When I switched the handset to normal vibrate and ring mode (assume this works on ring w/o vibrate as well) MSVC announced the caller through the headset and nothing audible was heard through the handset. I would say this headset is 100% compatible with the Tilt and MSVC.
Bought the Z9
My Z9 arrived today, and it does answer the phone, engage in voice command, etc.
Pretty nifty (but expensive) bluetooth.
Thanks!
Glad you like it. I hope you give us a nice reveiw after you play with it for a while. I am contemplating moving up because I have had this same type of headset for years now HS810, HS820, HS850, and the H700.
I've got AT&T Tilt, Stock ROM, MS Voice Command 1.6.17913 and Samsung WEP200 all working together.
Also, in MS Voice Command, there are options to select the source the phone calls are made from.
Go to "Start" > "Settings" > "Voice Command"
Click. "Notifications" button and the options that come up are...
-Announce notifications using Bluetooth hands free only
-Announce notifications using Bluetooth hands free if available
-Announce notifications through device speaker or wired headset only.
v 1.6 nad jabra
i still cant get it all to work on my tilt like my 8125...8126 was the bomb with vc. tilt is so nice but not with vc
I tried out a plantronics 665 the seemed to work well, but I didn't care that much for the headset. Returned it and got a nxZen nx9000, and it doesn't seem to work with voice command. Not sure why one works and not the other. Anyone care to speculate, or state with authority, why the 2nd headset doesn't work? Thanks.
Anybody knows how Logitech Mobile Pro Headset works with this combo?
Thanks
http://www.logitech.com/index.cfm/webcam_communications/mobile_phone_headsets/devices/536&cl=roeu,en
Is the Jawbone working with all this? I broke my last Jawbone, but would definatele get another, assuming it would work.
My Jawbone works with my Tilt with the stock ROM. Make sure you install VC before you pair your phone with the headset. If you already paired, delete the pairing and re-pair after the install.
Thank you much.
Now I've got another issue, somebody said "BLUEant" and I saw went looking... I like Blue
Trying to decide between the Z9 or another Jawbone. Comparitively they're about the same with the Z9 being the smaller and more "attractive" of the two, and it also costs alot less. Not to mention it's firmware can be update.
But the big plus for me is that it's BT 2.0 BT 2.0 + Firmware upgradeability make it a serious contender in my book. The Jawbone is in it's prime... whereas the Z9 could get better.
Can't decide at the moment...
I also have the Tilt and Jawbone working together but does anyone know if it is possible to issue the voice commands via the headset. I can only talk into the phone to make it dial a name and then the call is directed to the bluetooth headset.
has anyone got this to work all through the headset.
I couldn't imagine it not being possible... I managed to use the Jawbone with the RAZR V3 in or to use voice dialing and it worked decently.
Jawbone and voice dial
Have had a Jawbone paired with my tilt since I bought it. Works perfectly except calls are not announced through the bluetooth, but important e-mail subjects are read through the headset when they arrive.
The Jawbone is sometimes awkward because it gets loose on your ear/cheek if you move your head alot and then sounds like your talking through a long tube.
Thinking about trying blueant, but haven't heard any glowing reports yet.
W_P_L said:
Have had a Jawbone paired with my tilt since I bought it. Works perfectly except calls are not announced through the bluetooth, but important e-mail subjects are read through the headset when they arrive.
The Jawbone is sometimes awkward because it gets loose on your ear/cheek if you move your head alot and then sounds like your talking through a long tube.
Thinking about trying blueant, but haven't heard any glowing reports yet.
Click to expand...
Click to collapse
There are plenty of fantastic reviews for the BlueAnt Z9. It seems to me to be just the same as when I was researching the Jawbone. You'll either love it, or you'll hate it.
The big plus to me with the BlueAnt is that it's warranty is fantastic (2 years compared to the Jawbone's very specific 1 year warranty), it's BlueTooth 2.0 Stereo (should result in better sound quality as I plan to use my Kaiser as my MP3 player as well), and the big plus for me is that its firmware can be updated. Thanks to the firmware, the Z9's limitations are moreso a limit of it's firmware than it's hardware, whereas the Jawbone is fixed.
With that said, I loved my Jawbone... and I'll still be using my current one while it's still functioning (it's falling apart... Jawbones aren't very well built I'll say that) and comparing it to my Z9 when it gets here.
URPREY said:
My Tilt worked great with the stock ROM, MSVC 1.6.17913 and my BlueAnt Z9 worked flawlessly including announcing calls over BT.
Click to expand...
Click to collapse
Hi URPREY - I have the same setup (with the official ATT ROM update 1.62.502.0) working, but instead of announcing the callerid info, I'm hearing "please answer or not at home" through my Blueant Z9 via my Tilt. Any ideas?