Sorry if you have already read this but I am still having a problem!!
I got the new Bluetake iphone mini stereo headphones for christmas and was hoping to use them with my MDA Pro (running the new O2 ROM).
I have them paired as a "Hands Free" device...
I know that I can't use the stereo features until the new A2DP patch come out (hopefully soon!), however what I want to be able to do is use voice command to initiate calls etc. However when I press the call/power or Play/Pause button all I hear is a beep from the headset and nothing hapens on the PDA...
However I can use the button to answer and hangup a call (as long as I answered it with the handset...) If I initiate the call on the MDA then I can't hangup with the headset...
Am I doing something wrong or does it sound like something is faulty??
Any advice?
Thanks
Andy.
I actually had an oportunity to try out the voice levels and sound is awful! I also tried to connect it to my SE T610 and it refused and it did the same when I tried to connect it to my Toshiba M200 tablet PC as in both cases it never asked for the passkey...
I am begining to think that they must be faulty??
But becuase I have never had a BT headset before so I'm not sure if I am doing something stupid!
Andy
I have managed to try a SE BT headset with my MDA Pro and it did work and activate voice command. So it would seem that the headset is faulty. Does anyone have any ideas before I send it back?
Andy
Please!! Is there anyone here who can comment on whether they think these are broken or if I am just incompetent!
If they are broken then I need to send them back really soon...
FWIW, my Jabra BT330 and the SE HBH-662 just need a single quick click to activate the voice dial, but these Plantronics Pulsar 590A things I just got (which are fandabidosi by the way!) need a prolonged press to do the same.
Have you tried keeping your finger on the button for a while?
Ferg.
andykemp said:
Sorry if you have already read this but I am still having a problem!!
I got the new Bluetake iphone mini stereo headphones for christmas and was hoping to use them with my MDA Pro (running the new O2 ROM).
I have them paired as a "Hands Free" device...
I know that I can't use the stereo features until the new A2DP patch come out (hopefully soon!), however what I want to be able to do is use voice command to initiate calls etc. However when I press the call/power or Play/Pause button all I hear is a beep from the headset and nothing hapens on the PDA...
However I can use the button to answer and hangup a call (as long as I answered it with the handset...) If I initiate the call on the MDA then I can't hangup with the headset...
Am I doing something wrong or does it sound like something is faulty??
Any advice?
Thanks
Andy.
Click to expand...
Click to collapse
Just looked at the instructions for the bluetake i-phone (bt450rx),
(got them myself for xmas)
and it does not say that you can connect to the phone for voice control,
however you should be able to hang up from the headset.
i have got the k-jam (wizard) and can dial from the k-jam and hangup from the headset.
voice control may not be available because the new bluetooth stereo headset's are ready for AVRCP (Audio Video Remote Control Profile).
the older bluetake headset bt420rx can be used for voice control but do not have AVRCP function.
I hope i am wrong, but it may be the answer you have not been looking for.
Hmm... That sounds bad...
I only have a few days left to return it and don't know whether to get a replacement or to go for a different headset?
i like the idea of being able to play/pause/f-foward/rewind via the headset(when bt v2 upgrade is available), because music playback is more important to me than voice dial.
of course if you can send it back, then perhaps just wait until bt v2 is available, and then buy a headset for the uses you require it for.(wish there was an emotion with cross eyes) LOL
I know what you mean but I would still be able to use voice command!!
Does anyone else have the 450Rx and a universal and could test it for me?
if you do prove me wrong (and i hope you do) please let me know.
answering this problem further,
the bluetake i-phono mini headset cannot be used for voice command,
however the motorola ht820 can be used for voice control.
Had similar issues with my headset (not the same type). In the end, I had enable secure mode on the universal, pair the devices, select serial port and then immediately initiate the voice dial, otherwise it didn't work.
Gareth
I decided to play it safe and returned it back to Expansys for a refund. When someone else gets a set of stereo headphones and A2DP is out... and crucially they can confirm it works! Then I'll buy a new one!
Cheers
Andy
one good thing with motorola ht820 is that they can be used with a detatchable cable, so whilst i'm using them bluetooth for the phone side, i can still hear good quality music.
also i know from trying them with my wife's qtek s110 that you can control windows media player as well.
you may have already tried this, but just in case you haven't,
install and run the three files for either "bt off", "bt on", or "bt toggle",
this will switch all audio to the bt headset or away,
of course quality is not good, but at least no cables.
ps. if the headset is switch off and you put bt on, you will get an on screen error message.
aliendad said:
one good thing with motorola ht820 is that they can be used with a detatchable cable, so whilst i'm using them bluetooth for the phone side, i can still hear good quality music.
also i know from trying them with my wife's qtek s110 that you can control windows media player as well.
Click to expand...
Click to collapse
Do they come with this cable as standard?
EDIT: Did a search, and they do.... might just buy them now and sell my Sony EX-71's.... would they we at least the same in terms of sound quality? It's the thing people talk about least with these devices!
So lemme see if I got this right.... even before I get A2DP installed on my Exec, I can listen to perfect music using the cable, and also use the hphones as a bluetooth headset as well? Will the music still pause etc when a call comes in?
Just bought a pair of HT820's on Ebay there.... £38, not too bad. Should get about £25-30 for two pairs of existing headphones, so well please.
Related
I have a bluetooth headset working fine for calls, however have 2 questions. Has anyone gotten the headset working for things other than calls, such as media player? Also I have a problem with answering the phone with bluetooth turned off, if I turn it on while on the call and give it a minute to sync with headset and then try to transfer the call to the headset it won't work. But if I hang up and call right back the bluetooth will work.
I have the same problem but regrettably no answer: ( :? :? :?
bleuthooth headset
hello i have the bt g2 it s only 12 gramms and its works fine with my mda 2
You can listen media player with your headset ????
Without specific manipulation??? Not possible
:shock: :shock:
Hi every1!
Actually, until someone (HTC, Micro$oft, or anyone else) comes out with a new Bluetooth stack that support the full Handsfree profile, (something any BT equipped mobile phone already does) there is NO other use of headphones.
Even the more simple functions are not implemented.
I think this is the worst part of the Himalayas right now. A wonderfull piece of hardware, but very poor phone functions.... to say the least.
BT6023
This is the BT Handsfree that Im using now. So far so good. No connection failure.
Handsfree?
Hi nelsonlye!
Sorry to say, but, This is not a headset?
Could you be more specific on the brand and model and the "handsfree" functions it supports?
Does it allow Voice Dial or any other voice input?
It looks like a conventional headset, so if no other functions are implemented, it IS a headset, NOT a handsfree device.
Furthermore, until HTC or Microsoft release a new Bluetooth stack, looks like no new functions will be available. And it seems it will take forever!
Regards.
go to hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
when activating voicedial from your headset (press connect button at the headset 2 sec.) it diverts all audio to the bluetooth.
works also with musik.
pressing the button again it disconnects the bluetooth and the main speakers are active again.
in this case the original voice dial does not work anymore until you change the value back to 1.
for me a good solution because i don't use voice dial and prefer insted skype and headset.
Very good tip...will try that!
Cheers...!
Works on QTEK S100 with Jabra Bt 250 Headsets?
Do you happen to know if the BT specification of the EXEC allows it to transmit stereo audio? Say from a mediaplayer to a BT car kit?
If so, that would send me over the edge and Id have to buy a BT carkit!
...ohh, on 2nd thoughts, it would also depend on the bandwidth too. Anyone know what sort of frequency range BT stereo may be limited to?
for stereo output is another reg.hack needed i think. because pushing the voicedial button at the handset it activates the bluetooth headset profile for listening to the voice but voicedial doesnt start. so you can use it for normal micro and loudspeaker.
maybe anybody knows how to activate in this case the "high quality audio profile" by editing the registry instead of "headset profile"?
Great job, The sound (in music) is good ? i tested this but the sound wasnt good.... I think my headset isnt good for music.
yes it depends on the bluetooth profile. for good quality "high quality audio" (A2DP) profile is needed.
blueangel
would this work on a blueangel running WM5?
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
hdubli said:
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
Click to expand...
Click to collapse
No it does not work in QTEK s100....
Works -but not great
very tinny muffled sound on my moto HT 820, was hoping it would work as well as the bluetooth stack update for the magician.
Sound does come out in both ears on my stereo phones. but I dont desire to listern to the tinny sound.
Still great find and discovery. Just hope someone can progress it to A2DP asap.
sorry, but can anybody tell me how to edit the registry in WM5? I never did it before. What tool do you guys use? Is it something free?
Thanks.
I used PHMREGedit
Here's the link:
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
andyes....it's free.
Tried it with my BT200
I know the registry works....but cannot get it to play on the headset.
It works...becos upon pressing the phone button on the head set for 2 sec, the audio comes from the handset. On redoing it again, the audio goes off from the handset.
Mine is working fine. I really like the way its now.
Thanks a lot.
Ooops....
my Bt200 wasn't working. That's why there was no audio coming from it.
Need to figure out why there is no audio coming from the headset.
Sigh another problem!
So basically, the registry works.
Im using Total Voice COmmander and it works with WMP.. No need to install another software to play music thru BT.
I just press my Jabra headset twice and it goes "Say Command".. then I say "Play a music"..
Sometimes it's stubborn and Calls someone or Says "Today you have no Appointment" but I guess with a lot of practice, my Dopod understood what Im saying and played me a song.. Now, Im having trouble with my Dopod catching the title of the song i want it to play. I've placed voice tags on the songs and 50% of the time, my dopod got it right.. got to work on the other 50% though..
Ok, this is going to sound really daft and I know alot of you are going to say, "Whats this guy raving on about??", lol
Ok, here goes.
My wizard is on a phone holder in my lorry, usede for Tomtom.
I have a works mobile, with a bluetooth headset. (Also works).
The headset can only be paired to one phone at a time and although I dont get many calls on either phone it would be nice to work out a way to use one headset on both phones.
So now the question, does anyone know of a way I can basically forward the audio, over BT to the wizard from the works phone, and then have the wizard output that audio, again over BT, to the headset?
I'm not botherd aboout the button control as I can use the phone for answering and hanging up.
Voice Command 1.6 seems to be a bit of a nightmare and i have given up on my hermes for now.
My trinity though is almost ok, the only thing that doesnt work is when i push the voice button on the headset the sound comes out the phone speaker.
If i use the button on the phone though the sound comes out the headset.
How can i change the action of the button on the bluetooth headset to do what the button on the device is doing.
Thanks all.
Rob.
rjefferis said:
If i use the button on the phone though the sound comes out the headset.
How can i change the action of the button on the bluetooth headset to do what the button on the device is doing.
Click to expand...
Click to collapse
FYI I use a SonyEricsson stereo BT headset and I don't experience this problem.
Rjefferis, I experience the same problem as you.
I have a Jabra JX10 headset.
Confirmation voice always comes out of phone speaker, not headphone... and irritatingly, it takes microphone readings from the phone body too. Kind of defeating the idea of hands free voice dialling.
FuzzMunky said:
Rjefferis, I experience the same problem as you.
I have a Jabra JX10 headset.
Confirmation voice always comes out of phone speaker, not headphone... and irritatingly, it takes microphone readings from the phone body too. Kind of defeating the idea of hands free voice dialling.
Click to expand...
Click to collapse
Yeah this seems to be the problem on the hermes too. On mine it works correctly if i use the voice dial button on the phone. So the button on the headset and the button on the phone must be calling slightly different functions. All i need to know is what reg key i have to edit to make the headset button do the same as the phone one.
Try yours to see whether it works using the phone button. I think maybe my a2dp is getting involved somewhere as well.
There is an option about Notifications and Bluetooth devices in the Voice command settings... does this solve you problem?
Not for me.
It is set to read only through handsfree. I havent got my headset here, so I will see what happens if I switch it to the opposite like rjefferis implied.
yeah i doesnt make a difference using the options in voice command.
I think maybe when i push the button on the phone it works through the a2dp to the headset which obviously it shouldnt be.
When i use a non stereo headset then i think it always comes out the phone no matter what.
There are a number of threads regarding this issue and some semi-working fixes to get initiating a voice call through a mono bluetooth headset.
The problem seems to be a difference in the trinity passing audio through the audio gateway using a mono bluetooth headset. Not sure if this is a problem with the implentation of Microsoft's bluetooth stack on the TyTn/Trinity but I'm assuming that's the case.
According to Microsoft's Voice Command site, they indicate that the TyTn (put the Trinity in the same situation) passes audio through the device speaker. They also make note that devices running Windows Mobile build prior to 15097.3.0.0 will pass announcements through the device speaker. This leads me to believe that Microsoft fixed audio to a mono bluetooth headset but I've seen lot's of messages from people running roms higher than this version who still have the problem so sounds like HTC hasn't implemented it.
I've sent emails to HTC who indicate that it's a 3rd party program and there is no guarentee they will fix it as it's a Microsoft problem. I haven't been able to get word from Microsoft if it is being fixed but from their website, seems both parties are passing the buck on this one.
Considering HTC's lack of commitment in releasing updates for their branded products and the delay, we probably won't see another rom after their first release for a while if any since they seem more committed to releasing new products increase their bottom line without keeping their current customers happy. So if it's not in their upcoming rom update and Microsoft isn't releasing a fix, we could be waiting a while. I'd recommend anyone who cares about this issue to send an email to HTC Support. You'll get the generic response but hopefully if enough people complain about it, a fix might fall into their update
I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?