My htc 3600 is stuck in bootloader i think, (its red, green,blue and white with the text Trin100 IPL-0.50 and TRIN100 SPL-1.07.0000). Below it says serial and when i plug in the usb cabel it says usb but it cannot connect to active sync. What are my options to make it work again? A hard reset doesnt work. I read that u can boot with a sd card and rename the nhb file, does that work?
Thx
Björn
Never mind..
Never mind, it works now...
Related
Hi,
I tried a new rom and now am stuck at the bootloader with no OS on the phone.
ipl 2.10.0001
spl 2.10.0001
gsm 02.69.21
os 4.0.0.0
I have searched all the forums and still cannot get my spvm600 to do anything. I have tried to run several roms but the problem is they cant see the phone as activesync wont connect. is there a way i can boot from the sdcard or somthing or do i have a expensive paperweight. when i try to hold down the camera and comms keys on start it asks me to format the device and then says doen and goes back to the above screen
anyone?
ideas?
Try to restart your device and deliberatly go to boot loader (keep camera button in) (keep usb disconnected).
once at boot loader screen connect usb cable ... you should now see "usb" in bottom left corner on device screen.
now run a wm5 rom like in step 1 of "how to upgrade from WM5 to WM6" thread - - http://forum.xda-developers.com/showthread.php?t=310452.
it worked for me!
every rom i try to install on it needs activesync to connect to it but activesync douesnt connect to it as the phone has been formatted. there must be a way to fix it but but i am totally stuck
Rom Upgrade doesnt need Active Sync, you just need to be in bootloader and have the usb cable connected. Then just go through the update utility.
I try that and it still seems to say no device connected would you like to try copying again. I cant understand it cause it makes that bling noise when i plug it in
Use Update_NOID
You must use the No_ID Updater to upload a ROM from the 3 colour screen. Just run this exe file and you should not have any problems.
Hi,
Please help, I too have the same problem. Installed all the versions but no use. Can any one help me how to downgrade to Original German ROM version for Neo. So that I can return to O2 company... otherwise this become expensive paper weight
thankyouthankyouthankyou
YEEAAAAHHH
my phone is now working.
the no id rom worked a treat.
xtrafletch thanks a million!!
Hello,
i tried to update my BA with wm6.
after flashing it stuck in bootloader(blue,green,red,white display) with the line "R 1.10.00" and nothing more...
even hard or softreset do nothing.
what can i do?
ok i even try the Stuck at startup method.
that's the output of Multiport TTY Version:
set 14 0
HTCST ÚÈÒHTCEUSB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>task 0
it always stuck in blue,green,red,white screen after run multiport tool. what can i do?
------------
i have this problem because of this flashing method:
i entered the grey screen (with serial/usb in first line). then i put my usb connection on and run the rom_update. after it is finished (succesfully) it stuck in the blue, green, red, yello screen! help please...
how did you hard reset?
hello,
i hold down the power-button and at same time put stylis in reset.
hard reset for both WM5 and WM6 is different from the one you're doing. here's the guide...
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
good luck!
ok thanks, i have tried this:
i do softreset. whenn the stripes came i push "records and "camera"(media player button because there is no camera)---> nothing happens. it stops with the line R 1.10.00 and the coloured stripes.
i dont knwo what to do.
the bootloader method is running. i hold power and record button while i softreset. but with color screen it wont work.
they is no camera button (it is media-player button) because there is no camera. its an german xda III (blue angel).
the next problem is i dont knwo what os is right now on it. befor flashing it was wm2003 and flashing says it was successfully. i dont know if its wm6 or wm2003!
ok now all is happen...
the xda says nothing. it dont go on, it dont work anymore. no lights when in cradle, nothing.
can i do anything?
1. Take the battery out, wait a moment, put it back, do not turn on. Put in the cradle and try to charge it. Use power connection (from power supply), disconnect USB from the computer for charging. Amber led should turn on.
2. When it will be fully charged (amber LED will turn off) try to turn it on and enter bootloader. Try to downgrade to WM2003. If it works fine, try again to flash WM5 or WM6.
What you did seems to be wrong update (wrong rom, wrong file, not fully flashed). But you still have bootloader, so it should be possbile to flash it. But you need full battery.
jakubd said:
What you did seems to be wrong update (wrong rom, wrong file, not fully flashed). But you still have bootloader, so it should be possbile to flash it. But you need full battery.
Click to expand...
Click to collapse
it was not unlocked befor i flashed with bootloader-method.
i charged the battery in cradle (withoud the blue-angel). the led first went orange, after a while turned green (fully loaded). put it back in BA an nothing happens. then put BA (with battery) in cradle and the led became red.
no action on devide, no feedback, nothing. it wont turn on but led is still working.!?
jakubd said:
2. When it will be fully charged (amber LED will turn off) try to turn it on and enter bootloader. Try to downgrade to WM2003. If it works fine, try again to flash WM5 or WM6.
Click to expand...
Click to collapse
ok i get it. in display is the "USB" & "v2.07". now i can flash. but my problem is the phone is not unlocked yet. what file can i flash now??
This message tells you are in bootloader mode. Now you can perform normal flash - I would propose you to use tested&working rom (WM2003?). If this works fine, try again to upgrade to WM5/WM6.
BTW: if you disconnect USB (take out BA from cradle) it should show Serial instead of USB.
ok big tanks to the forum. i finally get it. wm6 german on blue-angel!
Same thing here... but worst..
My 9090 is stuck at bootlader...
When i try to update, (i press the power, record and reset), it says:
SERIAL (or USB)
DOC VERSION IS ERROR!
v2.08
Any idea???
that's normal...
try to flash/update your BA in that screen.
the easy way to go into bootloader mode is to execute a file called Enter Bootloader.exe ..it comes with the rom u download..( well it came with xplodes )
Note:- you have to execute this file directly on your deive not on your desktop PC...and i have only tested this on WM 2003..maybe it will work with wm6 also
SilverSamurai said:
that's normal...
try to flash/update your BA in that screen.
Click to expand...
Click to collapse
I there...
I just updated to BA_TMNL_14200_119_11300_Ship, but only with Maupgrade, couldnt do it with baupgrade...
The problem is that i cant put extended rom, whem i try to upgrade is allways an error... and in the settings i dont have extended rom instaled...
Besides that the batery only last 1hour and the PDA is always freezing... i'm always doing resets...
any idea??
Sorry for my bad english by the way...
I had a wizard and trying to fix it.
When switch on, blue cingular screen appears and show ipl spl gsm os numbers.. and halts on.... it stays like this...
i enter RGB screen it says ONLY `ipl 2.25 spl 2.25` ...
when i connect it to usb.. USB text appears but when I try to install `love ROM` RUU says, it is not connected check computer check usb cable.. so it is invisiable for computer but in device manager it s shown as winCE syc device when I connect..
do u think it is bricked.. Or theres some to do....
thanks
it wasnt dead...
thanks to this forum!!
m_carleone82 said:
I had a wizard and trying to fix it.
When switch on, blue cingular screen appears and show ipl spl gsm os numbers.. and halts on.... it stays like this...
i enter RGB screen it says ONLY `ipl 2.25 spl 2.25` ...
when i connect it to usb.. USB text appears but when I try to install `love ROM` RUU says, it is not connected check computer check usb cable.. so it is invisiable for computer but in device manager it s shown as winCE syc device when I connect..
do u think it is bricked.. Or theres some to do....
thanks
Click to expand...
Click to collapse
Hi,all,i have this problem........ipl 2.17 spl 2.17....please help.......
m_carleone82:
press Camera+reset to enter RUU mode, then flash with Cingluar original ROM.
starkwong said:
m_carleone82:
press Camera+reset to enter RUU mode, then flash with Cingluar original ROM.
Click to expand...
Click to collapse
Hi Starkwong.....i have the same problem .....can i reflash to original rom even my MDA is not recognized by my PC?.....thanks for your reply
ichiban said:
Hi Starkwong.....i have the same problem .....can i reflash to original rom even my MDA is not recognized by my PC?.....thanks for your reply
Click to expand...
Click to collapse
Yes ! if it gets into Bootloaders mode(tricolor screen) with ipl/spl display and when hooked up with pc via usb,a small usb appears at the bottom of the Bootloaders,it means it has connectivity with the pc,You can flash the official rom in the Bootloaders.
ahhh, hardreset. the pumpkin in my eye.
"m_carleone82:
press Camera+reset to enter RUU mode, then flash with Cingluar original ROM."
I´m right now on the RGB screen , and how can now put the original ROm????
please help me
thx
hugomalheiro said:
"m_carleone82:
press Camera+reset to enter RUU mode, then flash with Cingluar original ROM."
I´m right now on the RGB screen , and how can now put the original ROm????
please help me
thx
Click to expand...
Click to collapse
While in Bootloaders (RGB) screen,hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloaders,run the RUU in the Rom you downloaded,follow the instructions,it'll start to flash.let it finish and the phone will reboot.
I tried to put flash a rom onto my phone,An when i did the hard the rest it wont load pass the screen that says
ipl2.25
spl 2.25
gms 02.25.11
then the logo cingular
I have tried to restset to factroy default but the same thing happens.
I also tried to connect by usb to pc an wont allow me to connect.
some please help me find out a way to fix it or should i just get a new phone?
twizzymckin said:
I tried to put flash a rom onto my phone,An when i did the hard the rest it wont load pass the screen that says
ipl2.25
spl 2.25
gms 02.25.11
then the logo cingular
I have tried to restset to factroy default but the same thing happens.
I also tried to connect by usb to pc an wont allow me to connect.
some please help me find out a way to fix it or should i just get a new phone?
Click to expand...
Click to collapse
Is your phone CID unlocked ? if it's not CID unlocked,try to unlock and read and follow the unlocking guide by Dr Puttingham in the stickies.If it's CID unlock,it's a bad flash and reflash the rom,get your phone in the bootloaders mode (multicolor screen) connect via usb cable and check if small usb appears at the bottom of the bootloaders screen and run the Ruu application.
cheers !
alright, im brand new at this and i was trying to unlock my htc 6800 and was using olipro 2.40 then when it ended my phone stayed stuck in bootloader mode.. :/ it says TITA100
SPL-2.47Nochem Titan SPL EVI
CPLD-9
and at the bottom either USB or serial.
can someone pleeease please help me out here.
its a new phone!! :
noob18 said:
alright, im brand new at this and i was trying to unlock my htc 6800 and was using olipro 2.40 then when it ended my phone stayed stuck in bootloader mode.. :/ it says TITA100
SPL-2.47Nochem Titan SPL EVI
CPLD-9
and at the bottom either USB or serial.
can someone pleeease please help me out here.
its a new phone!! :
Click to expand...
Click to collapse
Yea no problem, first start from a freshly rebooted PC. Now just put the phone in bootloader again while phone is unplugged. Now disable USB connections in Active Sync (icon on computers taskbar). Plug it into the computer on a main usb port and now and give it a couple seconds. Look in your C: drive for a folder Named Oli pro, or titan something of that nature. Open it and run ExitBL.exe it will issue the commands to the phone exiting bootloader. If you still cant find it, then just use WinRAR or 7zip to extract the contents of the Olipro240.exe into its own folder then look for ExitBL.exe
What you missed that the olipro prompt doesnt tell you is right before the very last step you are supposed to disable USB connections. I think when it tells you to unplug and plug back it you let it do its thing until its done flashing, then before it says press enter or a key (last step) you disable usb connections and then press a key to end. That will run ExitBL like its supposed to. Hope I have helped.