Database Users

colored bootscreen

Hello guys, I hope you can help me.... In the middle of a ROM update my (!#@#[email protected]#) PC rebooted.... (while in the white screen on my Qtek 9100) Now the only thing it will come up with is the colored screen saying: IPL 2.21.0001,SPL 2.21.0lip and the USB is on. Active sync isn't able to connect to my device so now what?? Is it bricked?
Hope sombody can help me.... the colored screen means something's still working isn't it?
thanx in advange,
NEVSKI

what update were you trying to install? WM5? WM6? Official or cooked?
What windows xp/Vista are you using?
How far had the update gone
Have you tried running the update again,just tick the i have an active sync connection ,even though you dont and see if it will update? While in the bootloader screen the coloured screen. Hopefully it will do it for you

NEVSKI said:
Hello guys, I hope you can help me.... In the middle of a ROM update my (!#@#[email protected]#) PC rebooted.... (while in the white screen on my Qtek 9100) Now the only thing it will come up with is the colored screen saying: IPL 2.21.0001,SPL 2.21.0lip and the USB is on. Active sync isn't able to connect to my device so now what?? Is it bricked?
Hope sombody can help me.... the colored screen means something's still working isn't it?
thanx in advange,
NEVSKI
Click to expand...
Click to collapse
Its a bad flash as your PC crashed,the update did not finish and you don't have a working OS on your device.As long as you are getting into Bootloaders (multicolored screen) the phone is working,it's definitely not 'Bricked'.,but bad flash might have corrupted the bootloaders (IPL/SPL) on your phone.
Therefore to recover it back to it's default status,download the official carrier's Rom from it's website and flash it in bootloader mode(multicolored).You don't need to establish Activesync connection as Activesync will not work in bootloaders.Just get the phone in bootloaders ,connect your phone with the pc via usb cable,check usb appear at the bottom of the bootloader screen in the phone and run the Ruu in the rom,let it finish and reboot,hope it'll recover to it's default working status and than do what ever you want to do.
Good luck

still a No Go......
well, I still got the 3 (with the white 4) colored screen saying: RUU, IPL 2.21.0001, SPL 2.21.0lip and USB in the white...... I tried a RUU but that didn't work. I had this phone flashed with WM 6 DUTCH and it worked like a baby untill I tried to SIM unlock it... doing that the PC crashed.... Explain please how to get the right ROM and maybe some more info on how to do it after I got the ROM downloaded.... I want my Qtek so bad....
NEVSKI

Yeeeeeeehaaaaaaa!!!!!!! I got it 'up 'n running'....
NEVSKI

igot the same problem
it comes up with the 3 colourd screen usb at the bottem in the white when i put usb cable in but wont connect to active sync i dont no whare to get the 02 rom from can any on help please

What Should i Do?!?(wont load pass service screen)

I tried to put flash a rom onto my phone,An when i did the hard the rest it wont load pass the screen that says
ipl2.25
spl 2.25
gms 02.25.11
then the logo cingular
I have tried to restset to factroy default but the same thing happens.
I also tried to connect by usb to pc an wont allow me to connect.
some please help me find out a way to fix it or should i just get a new phone?

twizzymckin said:
I tried to put flash a rom onto my phone,An when i did the hard the rest it wont load pass the screen that says
ipl2.25
spl 2.25
gms 02.25.11
then the logo cingular
I have tried to restset to factroy default but the same thing happens.
I also tried to connect by usb to pc an wont allow me to connect.
some please help me find out a way to fix it or should i just get a new phone?
Click to expand...
Click to collapse
Is your phone CID unlocked ? if it's not CID unlocked,try to unlock and read and follow the unlocking guide by Dr Puttingham in the stickies.If it's CID unlock,it's a bad flash and reflash the rom,get your phone in the bootloaders mode (multicolor screen) connect via usb cable and check if small usb appears at the bottom of the bootloaders screen and run the Ruu application.
cheers !

probleme flash

Hello,
can some one help me please.
I try to flash my touch cruise and at 99% his stop.
after i just have 3 color screen and can't flash.
I try hard reset but it still color screen.
in the screen i got :
POLA100
SPL-1.25.0000
CPLD-2

Which rom did you try to flash on your device? I would suggest to check out the threads that relate to that rom. If you have used Olipro's hard-spl and followed all the steps for flashing the rom, maybe you could ensure your device is fully charged,that the file you have downloaded (rom) is not corrupted and try flashing it again.

shinshazz said:
Hello,
SPL-1.25.0000
CPLD-2
Click to expand...
Click to collapse
You had to hard-spl your device first!!

I have use Hard-SPL-V2 and when it get at 99%, it stop and then i get the 3 colors screen.
the rom I want to flash is the bepe 0.56.
Is my phone is over or I can get it work again.
I alreasy try to flash with the original HTC rom also, but don't work.

shinshazz said:
I have use Hard-SPL-V2 and when it get at 99%, it stop and then i get the 3 colors screen.
the rom I want to flash is the bepe 0.56.
Is my phone is over or I can get it work again.
I alreasy try to flash with the original HTC rom also, but don't work.
Click to expand...
Click to collapse
Sorry, just to be clear. It only gets to 99% of the Hard SPL V2? So the problem is not the rom you tried to flash but the Hard Spl?

The Hard-SPL-V2 that i have try is by Olipro, and I follow all the instruction.
I don't know why he stop at 99%.
I ask SFR, and they can't do anythink.
I think it's over for my phone .
I will try to ask HTC if they can do something and how it will cost.
hope give you good news .

Flash Problem
Hello,
I have the same problem...do you already have solution for your case ?!?!
Thank you in advance !

Ignore this post - I had IE troubles and double posted - See next post

Just to be very very clear since you are talking of HardSPL and of bepes ROM and mix all up:
You did not apply HardSPL to your device!
A device which has HardSPL applied would read "Pola100 MFG, SPL-2.20.Olinex, CPLD-2" at the 3-color-screen. Your device is still with the original bootloader. I suggest you try applying the HardSPL V2 again until it works or you get bored. Exactly follow instructions given in this thread: http://forum.xda-developers.com/showthread.php?t=370434

Hello, i had the same problem, i just soft reset my device and flash it back, it went up to 100% without any problem

Not working
Hello,
On device when I just connect the usb cable I get the three colour display with info:
POLA100
SPL-1.25.0000
CPLD-2.
Then I follow the instrutions, but when I get the step 7 the device appears always on 0% and get always the error 262.
Do you know how to fix this?!?!?

mrtgds said:
Hello,
On device when I just connect the usb cable I get the three colour display with info:
POLA100
SPL-1.25.0000
CPLD-2.
Then I follow the instrutions, but when I get the step 7 the device appears always on 0% and get always the error 262.
Do you know how to fix this?!?!?
Click to expand...
Click to collapse
You did something wrong. You have still original spl!
The correct steps:
Download hard-spl.
Plug your pda to pc.
On Pc run RomUpdateUtiliy (from Hard-spl folder)
Now you will see on PDA a tricolor screen and will be asked replug your usb cable. DO IT.
After Few minutes pda will reboot, hard-spl is installed.
Download the rom.
Now, STEP MANUALLY to bootlader. (press and hold camera, and press reset)
You will see a tricolor screen with OLINEX on your pda.
On the pc run the RomUpdateUtiliy (from the downloaded rom folder)
After Few minutes pda will reboot, new rom is installed.

See the images attached please.
I never get the "Replug information".
It's strange that Image version doesn't appear...
Thank in advance !

Now you will see on PDA a tricolor screen and will be asked replug your usb cable. DO IT.
On your PDA screen !
Not on your computer screen.

For information for my Polaris.
I found a phone shop in Paris, the boss of the shop say he can do something and I wait if he could or not.
Hope he will get me good news.

See this thread..
http://forum.xda-developers.com/showthread.php?t=373725

I brick my htc wizard help please i do not know what to do!!!!!

I BRICK MY HTC WIZARD... CAN SOME ONE HELP ME PLEASE???? I OWN A HTC WIZARD FROM CINGULAR 8125 POCKET PC. RECENLY I TRYED TO FLASH MY POCKET PC BUT SOMETHONG HAPPEND.... IT JUST STAYS ON THE CINGULAR LOGO..
IPL 2.21.0001
SPL 2.21.O1ip
GSM 02.25.11
OS 2.18.0.0
AND IT JUST STAYS THERE.....
PLEASE HELP......

brick...
chipis said:
I BRICK MY HTC WIZARD... CAN SOME ONE HELP ME PLEASE???? I OWN A HTC WIZARD FROM CINGULAR 8125 POCKET PC. RECENLY I TRYED TO FLASH MY POCKET PC BUT SOMETHONG HAPPEND.... IT JUST STAYS ON THE CINGULAR LOGO..
IPL 2.21.0001
SPL 2.21.O1ip
GSM 02.25.11
OS 2.18.0.0
AND IT JUST STAYS THERE.....
PLEASE HELP......
Click to expand...
Click to collapse
I try to answer... (sorry for my bad english)
1. Make sure your battery up to 50%, 100% is recommended...
2. turn off u'r PPC
3. press camera,talk, and power button at the same time for a second until your display show 3 colour....
4. plug your cable data from PPC to desktopPC, and make sure your display show "USB", and try to re-flash with other ROMS.....
Good Luck

Thank for answer me and understand what i ment
Ok what software you recoment?. I do not know if i have a unlocked phone but i do know that i used it with t-moble even that my pocket pc is for cingular, i went to those stores that unlocked phones and that it

Help.
I have a Wizard G4 and I tried to install a WM6.5 ROM (TechTeamup Mega Wizard rom) from the default WM5. I did not put in the hard-spl (as I now read) before I tried to flash. Now when it boots, I go strait to the flash screen (tri-color) screen. I tried ot run the hard-spl-G4 and it says it cannot find a device. I have tried to re-flash back to WM5 ROMs that I have found, however it says it cannont complete "ERROR 296: UPGRADE ONLY, which makes me belive I need a G4 Wizard ROM that is a full (not upgrade). What steps should I take now to revert back to a WM5 so I can re-try the "unlock" hard-spl proceedure to make the phone WM6 compatible?
Anyone have any suggestions?
IPL 2.28.0001
SPL 2.28.0001

Download the original ship ROM for your phone.
Turn the phone off.
Press and hold the Camera key, now insert the USB cable, Keep holding the camera key until you get the boot loader screen.
Now run the ROM update to flash back to WM5.

ricozy said:
I try to answer... (sorry for my bad english)
1. Make sure your battery up to 50%, 100% is recommended...
2. turn off u'r PPC
3. press camera,talk, and power button at the same time for a second until your display show 3 colour....
4. plug your cable data from PPC to desktopPC, and make sure your display show "USB", and try to re-flash with other ROMS.....
Good Luck
Click to expand...
Click to collapse
I brick my wizard too... What happened was I flashed my own cook of m6r5 it say successful but on reboot, it shows htc logo then stays ay tricolor screen:
IPL 2.26
SPL 2.26
Bootloader wont work..tried many times but I cannot connect to PC...
Tried ricozy post above, can access 3 color... but still cannot connect to PC...
Please help...anyone..

IF u can enter bootloader...connect to pc...u shud c "USB" written in the left bottom corner ...then flash a rom as usual

dead htc hermes 200

hi
i think i brick my htc hermes 200
i was trying to fix "No GSM" but during the way it shut down
i follow thread on wiki - problem 5
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
when it came to unlock my device was in bootloader I run the unlocker but my device turn off and now only shows the 3 color screen but with no light and no letters like info herm200 IPL-1.01 or serial or usb when i connect usb cable.
my device was
herm200
IPL-1.01
herm200
SPL-1.40.olipro
now i cant connect i try almost every thing but doesnt work
any sugestion ?!

did any one had this problem?????????

can any one provide an sdcard flash rum ready for me just to copy in memory card?

Have you tried a hard reset? If you are able to get device into bootloader as you say, you can flash another rom as well. Connect phone to pc via usb cable (bottom of bootloader should change from 'serial' to 'usb') and then flash rom. Obviously you need either HSPL or USPL on device first

first of all I'm very grateful for reply.
my problem is not like usual i been reading on wiki ore in forum.
my device get in bootloader but doesnt shoh light on the screen and doesnt show letters no info or serial/usb just shows the 3 color with no light on it
hard reset doent work
Obviously you need either HSPL or USPL on device first
Click to expand...
Click to collapse
can you provide for me I dont know where to find and what are they

ubejd said:
can you provide for me I dont know where to find and what are they
Click to expand...
Click to collapse
HSPL info can be found in the upgrading section in the wiki or in this sticky