Database Users

upgrading with activesync

hi all ..first you are wonderful for creating this site
thanks for all information
My device is HTC made xda 1 which in Turkey sold by escort computer and they build their cooked rom 3.20.03 eng and radio version 3.25.00 900/1800 freq.
Other than rom ver. it is equal of qtek 1010 .
I want to upgrade rom to win2003 .. when I begin the upgrade by activesync my device automatically soft reset itself and on my pc activesync 3.7 ver. shut itself.
I ve tried 3 times but nothing changed . Can you help me please.

Try it with a lower version of ActiveSync. Like V3.5 or V3.6
Regards
Mark

If your current radio stack works ok I would suggest leaving it alone, if your connection to activesync is likely to fail I suggest you use sd card flashing, much more reliable. If you are upgrading radio stack over activesync and the connection fails, you may end up with a pda but no phone. :shock:

I have tired with activesync 3.5 but also my device soft restarts and connection broken.
How do I use wm2003 by my 128 mb sandik SD card. and install the wm2003 to it with bootloader.??
Please make me understand in detail....

Search the forum for "sd flash rom"
For example the following link: http://forum.xda-developers.com/viewtopic.php?t=3274&highlight=sd+rom+flash
Regards,
Mark

QTEK S200

Dear friends as I do for reinstalling the operating system (Mobile Windows) in QTEK S200, he recognizes the cable of data more display disconnected in the program Microsoft ActiveSync, the language that came in him it is French, all this happened when I went to update for the ROM , please help me ...thank you very much.
OBS: I DIDN'T MAKE BACKUP OF THE SYSTEM.
P.S The ROM that tried to update it is that of this site after initializing the cable of data it didn't recognize anything - http://rapidshare.com/files/17208693 ...24721_NVID.exe.
QTEK S200
IPL 2.09
SPL 2.09.0000
GSM 02.30.21
THE 3.0.0.0

Welcome to the forum Carlos.
First, a couple of pointers:
1) In the future please select more descriptive titles for your threads. Like "Problem after ROM update". It helps people who may know the solution to your problem to find your thread amongst many others.
2) Please do not write everything in bold font. It is better to reserve this for special occasions when you really need to emphasize something.
Now to your problem:
You need to give us some more details so we can help.
What ROM were you using to update your phone?
How far did the upgrade proceed?
What error message did you get?
Note that during update procedure the device will disconnect from ActiveSync and go in to bootloader. This is normal and you must NOT remove the cable or try to reset the device!

Reisntall Windows Mobille
Dear friends as I do for reinstalling the operating system (Mobile Windows) in QTEK S200, he recognizes the cable of data more display disconnected in the program Microsoft ActiveSync, the language that came in him it is French, all this happened when I went to update for the ROM , please help me ...thank you very much.
OBS: I DIDN'T MAKE BACKUP OF THE SYSTEM.
P.S The ROM that tried to update it is that of this site after initializing the cable of data it didn't recognize anything - http://rapidshare.com/files/17208693 ...24721_NVID.exe.
QTEK S200
IPL 2.09
SPL 2.09.0000
GSM 02.30.21
THE 3.0.0.0 [/QUOTE]

CARLOS ROBERTO said:
Dear friends as I do for reinstalling the operating system (Mobile Windows) in QTEK S200, he recognizes the cable of data more display disconnected in the program Microsoft ActiveSync, the language that came in him it is French, all this happened when I went to update for the ROM , please help me ...thank you very much.
OBS: I DIDN'T MAKE BACKUP OF THE SYSTEM.
P.S The ROM that tried to update it is that of this site after initializing the cable of data it didn't recognize anything - http://rapidshare.com/files/17208693 ...24721_NVID.exe.
QTEK S200
IPL 2.09
SPL 2.09.0000
GSM 02.30.21
THE 3.0.0.0
Click to expand...
Click to collapse
[/QUOTE]
try changing the usb connect mode from rndis to serial via a .cab file here on the forums(don't remember where it is)

usbswitch
can he even get past bootloader? in 2 posts he hasn't told us very much.
but anyway...
philocritus said:
try changing the usb connect mode from rndis to serial via a .cab file here on the forums(don't remember where it is)
Click to expand...
Click to collapse
usbswitch.cab here in case anyone does need it- http://forum.xda-developers.com/attachment.php?attachmentid=39079&d=1179145368

Problem with XDA IIi

hello for all,
I have one XDA IIi and i have one problem. the PDA is dead, don't turn on. but if I press RESET boton the bootloader work, and on the screen displayed USB ... V1.06. so, when I try upgrade a new ROM the software in my PC don't displayed version are available on PDA and the activesync don't syncronize with PDA.
the software starts upgrade new rom to pda, starts with RADIO, but when that is on 99% and when the start transfer ext rom ocorred one error and don't work.
so, i tryed that process any times and don't work.
please help me.
PS: sorry my english, I am live in portugal

hi,
are you using windows xp or vista? if vista find a friend with a pc running xp as vista wont allow you to update the rom.
also make sure you have the 100% correct 2003se rom NOT wm5 or 6 as they wont work on this pda

hello,
I have windows xp SP2, and I tried in my laptop and don't work.
when Radio stack finish, one error ocorred.
when I try install o2 english rom ocorred one error: Error 113: Extented ROM Update Error
please where I find 2003 SE ROM for XDA IIi?
thanks
Antonio

satoniboy said:
hello,
I have windows xp SP2, and I tried in my laptop and don't work.
when Radio stack finish, one error ocorred.
when I try install o2 english rom ocorred one error: Error 113: Extented ROM Update Error
please where I find 2003 SE ROM for XDA IIi?
thanks
Antonio
Click to expand...
Click to collapse
in these forums, just hunt around for the latest update, but if that dont work, you may have a brocken phone

thanks by reply.
I have someone solution for this.
someone software extra or other solution?

active sync don`t see the Universal

hello everybody
i have an T-Mobile MDA Pro
i wanted to unlock it but error 150 of inlocker shows, after that wnated to change bootloader to ver 1.01 couldn`t because active sync don`t see the phone even after hard reset.
the info of me phone is:
R 1.00.02
G 42.33.P8
D 1.12.43 Ger
Rom-Version 1.12.43 GER
ROM Datum 08/23/05
Radio Version 1.00.02
Protokol Version 42.33.P8
Flash Chip Typ G3
Model Nr PU10
well got the problem
i have t-mobile mda pro sim locked on t-mobile
i have bootloader v0.6 on it when i use your unlock utility i say error 150 - wrong device.
i tryied this on 2 computers on win xp servicepack 2 and on win xp sp1... same problem
can you tell me what is the reason why i cant unlock the device? i try to hard reset and unlock - same problem please help me
if any one knows how to change dootloader or make it visible for activesync please help

http://img174.imageshack.us/my.php?image=dscn6573kt4.jpg
this is he photo of my mini usb port////heh/// i can`t see nothing but that i was changed...
http://img526.imageshack.us/my.php?image=dscn6574dd8.jpg

http://img526.imageshack.us/my.php?image=dscn6568hl2.jpg
One more photo....ca charge devise it all working good but can`t syncronise it with active sync, when i plug it to pc in bootloader mode pc finds an unknown usb
please help

ActiveSync 4.5

I've successfully upgraded my Qtek 9090 to WM6 Pro (5.2.16.20)
-
ROM version: 5.60.00 WWE
ROM date: 03/02/05
Radio version: 1.12.00
Protocol version: 1337.42
All works great, but still I can't connect to ActiveSync 4.5
When I put the Qtek 9090 on cradle it ask to install Activesync 4.5 or newer ... but I've installed (and reinstalled) this tool, downloaded directly from MS site.
I've also Updated all the components on PC (SO, Office, etc ..) with Microsoft Update. But still I've this problem.
Please, could you give me any help ?
Thanks in advance.
Beppe
-

i got the same problem!
my 9090 says:
cannot open the connection usb, this connection is no longer valid ore exist, plz select a diffrent
it worked until now

Sorry, my English is bad. But I try to help because I had the same problem.
Which firewall is installed?
With the change of WM2003 on WM6 new rules must be allocated for ActiveSync.
Several ports (999, 5678 etc.) must be switched free or turn the firewall off for testing!
Simply turning off the network monitor at the Comodo Firewall.
Good luck!
Mathias

My Qtek 9090 ask for Activesync 4.5 or newer while connecting.
I have just tried with another PC with XP on board and a fresh copy of Activesync 4.5 - Same problem (ask for 4.5 or newer)
I'm quite sure the problem is on PDA.
I hope in some suggestion.
Thanks to all.
Beppe
-

do search on the forum.. you'll find what you need..
cheers
evo

check\uncheck in USB to PC - Enable advanced network funkcionality try which one of them will work with your pc

RESOLVED !!! (Yeahhh)
The problem was on network properties of Qtek, when connected.
Right-click (in control-panel/network-connection) the Qtek entry / Then properties
- check only tcp/ip protocol and MS network services
- I've disabled bindings for VPN and packet-trace utility
Activesync 4.5 WORKS GREAT NOW
Have a nice WM6 upgrade.
Beppe
-