rk-OSR version 1.0.10 Automatic windows mobile outlook mail and exchange active synchronizer.
Here is a application I developed for my personal use now sharing with you all for non commercial use.
I basically use this utility to check emails from multiple email accounts from my windows mobile device using the wifi, gprs networks
You can even perform Exchange Active Sync too!
Feature list
Works on windows mobile 5 and 6.
Can sync up multiple email accounts at multiple schedules setup.
Can perform Exchange Active Sync.
Connect using: Wi-Fi only, Wi-Fi if not GPRS, Manual Wi-Fi, Gprs Only or Existing connection(USB)
Switch off GPRS/3G after sync
Option not to sync during Saturdays and Sundays
Get notified on emails or failed attempts
Get notified with custum sound(wav files).
Keeps device 'Alive' till all the accounts have been synchronized.
Supports 'Silent' mode.
Supports command line initiation.
Supports one touch* email checking(one touch on the shortcut connects to wi-fi network and switches between accounts and synchronizes and then hangs up wi-fi)
Can be set to sync only if device sleeping.
Does not write anything to registry.
Does not run in background.(works on notifications)
You can uninstall the application from ‘Remove programs’ and delete the application directory.
Installation:
Install the cab file attached below
After installation launch the program rk-OSR from the programs and go thru each tab page to configure it and finally save the settings (make sure the Enable check box is checked) test the functionality if working properly. Then close the application. Now the sync should happen at next specified schedule.
*One touch synchronization: A Very good feature for people checking mail manually, so that you do not have to switch accounts and click the sync menu each time or start/stop wifi etc, just one click to do that now. You can also assign this shortcut to hardware buttons. The new install adds a new program icon called ‘rk-OSR-Now’ to your programs list. But you need to do the following procedure done before attempting ‘rk-OSR-Now’ shortcut.
You should configure the ‘rk-OSR’, and make sure it is working properly and you are able to synchronize your accounts properly.
You must edit the shortcut, rk-OSR-Now; add additional text “Now” without quotes. Basically your target should read as below
"\Program Files\rk-OSR\rk-OSR.exe" Now
Hope it is simple to configure.
I have been using it on TyTn with WM6.
By the way this is my first WM application!
Code:
Following command lines supported
"\Program Files\rk-OSR\rk-OSR.exe" Now ---> Checks the mail manually
"\Program Files\rk-OSR\rk-OSR.exe" Enable --> Enables the rk-OSR
"\Program Files\rk-OSR\rk-OSR.exe" Disable --> Disables the rk-OSR
Update: 1.0.10
Added better file browser to locate the *.wav files
Fixed the bug with the 'Wait time to Sync'
Email.zip is a sound wav file 'You got mail' (ofcourse female voice! )
Note: this application requires Compact Framework 2.0
You need compact framework 2.0 installed inorder to run this application. The compact framework is already part of WM6, so if your device is WM6 skip this step. But most of the WM5 devices do not have this update. So you must download here and run the installation on your desktop (then active sync to update your device). Only after completing this step install the application.
New: If you want 'Push Like Mail' support please follow the application link to rk-SMS Switch
How to info for rk-SMS Swich with rk-OSR here
If you like the application please show your support by donation on Paypal
Download from here
Looks like this post of mine pushed down too fast because of the WM6 release(Wrong timing )
So i am just bumping my post up.
Anyone has any feedback?
I have synchronization problems whith gprs connection and activesync.
I try it you software....
Thank you.
Aslher said:
I have synchronization problems whith gprs connection and activesync.
I try it you software....
Thank you.
Click to expand...
Click to collapse
If you have synchronization problems already the rk-OSR might not work for you.
rk-OSR just schedules the outlook synchonizations, all the sync logic is on the outlook, not in rk-OSR
First you have to fix the problem with your sync, then only you could use rk-OSR
HTH
rk-OSR Update 1.0.1(One touch sync)
Please read the first post for the updated information and the cab file.
tytnguy - I'll try the app and get back here.
the idea sounds solid and do sync manually, so thx for the app allready
Keep up the good work in making life better for everyone
Update 1.0.2
There was a bug..
If you used Wifi to sync then any subsequent attempt to switch on wifi using the communication manager would fail(till soft reset )
Its fixed in version 1.0.2 now
I'm not sure why this app is not getting more attention, i mean syncing over wi-fi, isnt that what everyone has been cribbing out ever since AS4/WM5 came out??
neways, thnx for the app, will try it out..
let me see if I understand this app correctly before testing it :
At a given schedule it will turn on wifi
Synch
disconnect wifi
Right ?
What if im not at home at the time, so dont have wifi, will it default to GPRS ?
What happens to the schedule I have allready set in activesync ?
Right now i have just scheduled in active synch. So it uses either wifi provided I turned it on when i got home or if not turned on, GPRS.
thks
damase said:
let me see if I understand this app correctly before testing it :
At a given schedule it will turn on wifi
Synch
disconnect wifi
Right ?
Click to expand...
Click to collapse
Yes It does.
damase said:
What if im not at home at the time, so dont have wifi, will it default to GPRS ?
thks
Click to expand...
Click to collapse
Right now i do not have that functionality, but I will look in to that possiblilty
damase said:
Right now i have just scheduled in active synch. So it uses either wifi provided I turned it on when i got home or if not turned on, GPRS.
thks
Click to expand...
Click to collapse
I am not clear on the above. Can you explain a bit more?
Thanks
Question:
Hi there tytnguy, I've got a question:
I'd like to use your app; I have an exchange account for work; but for my private mail I use the Outlook Mobile. The problem is that when I set it to sync every 30 minutes or so; it keeps doing that during the night; waking me (an the misses) every time someone tries to sell me Viagra, Russian brides or weight-loss pills.
The times you enter in the "schedule-tab"; are those the exact times that the app will sync? Or are those the times between which the "outlook-Mobile schedule" will be active?
BTW: looks brilliant for a first-timer!
stynos said:
Hi there tytnguy, I've got a question:
....waking me (an the misses) every time someone tries to sell me Viagra, Russian brides or weight-loss pills.
Click to expand...
Click to collapse
I know its not funny
stynos said:
Hi there tytnguy, I've got a question:
The times you enter in the "schedule-tab"; are those the exact times that the app will sync? Or are those the times between which the "outlook-Mobile schedule" will be active?
Click to expand...
Click to collapse
Exact time on which you want the schedule to occur.
Thank you
tytnguy said:
Exact time on which you want the schedule to occur.
Thank you
Click to expand...
Click to collapse
Thanks for the quick reply!
Do you mean the time the sync will occur?
stynos said:
Thanks for the quick reply!
Do you mean the time the sync will occur?
Click to expand...
Click to collapse
Sorry about the typo.
I meant to say 'Exact time the synchronization will occur'
Quick answer.. Yes
tytnguy said:
Yes It does.
Right now i do not have that functionality, but I will look in to that possiblilty
Right now i have just scheduled in active synch. So it uses either wifi provided I turned it on when i got home or if not turned on, GPRS.
I am not clear on the above. Can you explain a bit more?
Thanks
Click to expand...
Click to collapse
Sure, in active sync, in the email properties you can say check for new mail every 4 hours or2 hours etc.., and determine settiings for peek, and off peek days/times.
It then checks if i have new email according to this, using either wifi provided I leave it on, or gprs if wifi is off.
tytnguy said:
Sorry about the typo.
I meant to say 'Exact time the synchronization will occur'
Quick answer.. Yes
Click to expand...
Click to collapse
Brilliant! I just had it sync; works like a charm!
The only thing: the device wakes up. Any change of performing the actions in the background? So the screen doesn't come on?
damase said:
... or gprs if wifi is off.
Click to expand...
Click to collapse
Are you able to setup the network configurations to use Wifi and if not available then to use GPRS?
I am not able to do it on my TyTn?
I dont think I setup anything specific really...
If Wifi is avaialble and the phone is connected to my acees point at home it uses wifi to connect to the internet and so on
If its not, it goes through connecting to the net via GPRS
Im running WM6 by the way.
damase said:
I dont think I setup anything specific really...
If Wifi is avaialble and the phone is connected to my acees point at home it uses wifi to connect to the internet and so on
If its not, it goes through connecting to the net via GPRS
Im running WM6 by the way.
Click to expand...
Click to collapse
You only use exchange?
yes only exchange
Related
Can someone please help to do over-the-air sync with Qtek 9100.
I have been trying for this a long time and never got it working.
Thank you,
Florian
Wi-Fi synching has been removed frm Activesynch 4.0 onwards by MS due to security concerns. That'll be why you can't get it to work.
If you want to synch using Bluetooth then search the forum as this has been discussed in length on several threads
Thank you for your prompt answer.
I was looking for internet sync thru Wifi or GPRS/Edge.
Is there another app out there that can do the job?
wilesd said:
Wi-Fi synching has been removed frm Activesynch 4.0 onwards by MS due to security concerns. That'll be why you can't get it to work.
If you want to synch using Bluetooth then search the forum as this has been discussed in length on several threads
Click to expand...
Click to collapse
I believe some one has released a free patch to override the 'Wifi syncing in AS 4.0'. I don't have the file handy- but will try and post later if the original poster still wants it.
I've not tried it myself since I'm still using WM2003 and AS 3.8.
I would love the patch to enable WiFI active sync if someone could post it. cheers.
cizake said:
Can someone please help to do over-the-air sync with Qtek 9100.
I have been trying for this a long time and never got it working.
Click to expand...
Click to collapse
well, it seems to be a solution:
http://www.airscanner.com/downloads/airfix/airfix.html
didn't try it by myself, so - no idea if it's usable and functional. but - always one more option ;-)
cheers,
Radek
Yes, that's the same link that I got the patch from.
Maybe someone can try it out and post back results?
Actually, just read the text from the link and it quotes the following:
"Please note that AirFix is not designed to allow ActiveSync over a WiFi connection. Rather, it is a tool that allows you to enable the wireless network after you are already synced with the PC (e.g. with a USB ActiveSync connection)."
Perhaps not what people were looking for after all...
I am currently trying to set up the app.
Expect a post shortly.
Did not find a way to make it work.
Also their download page states :
Please note that AirFix is not designed to allow ActiveSync over a WiFi connection.
As I doubt they have a solution...
You can sync over the air via GPRS or WiFi to an Exchange Server without a problem, I do it everyday; to a PC I don't now if it's possible anymore.
The Airfix app is designed to prevent active sync closing your current wifi conex, nothing more. This will allow software developers to debug network code and allow you to keep a wireless connection whilest you sync. Most home users will use activesync passthrough from their pc->internet rather than wifi-> internet and so notice no difference
Just sitting in a restaurant, no wifi, not connected in anyway to anywhere.. and the Activesync shows up ?!?!? Writing the correct last time I synced my device (which was this morning at home). WTF is this?
go to activesync app on the ppc
create a server source
enter a totally fictitious name and address
follow the wizard, dont select any items to sync
set the period to sync as manual for both
finish the wizard
open the options
delete the new server source
the default setting is to auto start and sync, by creating the fictitious entry it allows you to change those settings
deleting the server source retains the sync period settings
simon_darley said:
go to activesync app on the ppc
create a server source
enter a totally fictitious name and address
follow the wizard, dont select any items to sync
set the period to sync as manual for both
finish the wizard
open the options
delete the new server source
the default setting is to auto start and sync, by creating the fictitious entry it allows you to change those settings
deleting the server source retains the sync period settings
Click to expand...
Click to collapse
Simon,
I have done this numerous times when I had the O2 ROM. Now I have the IMate ROM, it works if I am not connected to anything, so that is good, for that is what I want. One thing I notice when I am connected through WIFI, active sync application on my Exec still opens up on the background. Are you having the same experiences with this setup or am I missing a setting here?
my active sync doesnt auto start AS at all anymore if i set the server source to sync manually, then delete the server source.
i use wifi a lot and it also doesnt start it.
there could be other reasons such as programs you have that auto update from the web when wifi is running, eg SPB weather. again, i set this to update manually.
what other programs do you have that require or use an AS or WIFI connection?
simon_darley said:
there could be other reasons such as programs you have that auto update from the web when wifi is running, eg SPB weather. again, i set this to update manually.
what other programs do you have that require or use an AS or WIFI connection?
Click to expand...
Click to collapse
I think you are right. I forgot about Pocket Weather's update settings. Thanks.
Hi,
I have setup Direct Push on our Exchange servers and setup my Qtek 9100 to DirectPush from it.
I recieve the folder structure
It tells me how many emails need downloading
I can SEND emails
But it doesnt bring any emails down!!
Can anyone help??
Email
I seem to be having this EXACT same issue. I cannot figure out what is failing.
Hmmm.. I am not at all sure, but I have an idea. If you go to activesync on the phone, and then go to configure server (under the menu right softkey), and then hit next and next again, you should see the screen with the things you are syncing... contacts/calendar/email/taskes, ect... If you then click on email, the settings button sould un-grey. Click settings. Change "Include the previous" and "limit email size" to "all", and then hit the "ok" in the upper right corner, and then finish. Hit the left softkey for sync, and it should get all of your email from the server... I have no way of knowing if this is indeed your problem, but I thought it may be worth a try... I would be interested to know if it works!
I have seen someone with exactly the same problem which I couldn't solve.
Are you by any chance running Microsoft SmallBusinessServer 2003 and Microsoft ISA 2004 :?:
Eman
We are running ISA Server...
Does everyone have this problem with Qtek or is it universal? I was going to try update ROM because you cant change account settings once you put them in, they grey out! But the ROM on Qtek seems a lower number than that I have installed... and Im not entirely sure what a ROM update does.
I have selected ALL on everything, just the number of emails to download increases... say 500 it displays 0/500 then 125/500 then disappears, still no email or anything!!
Just tried updating ActiveSync to 4.2 on a HP 6915...
Same problem...!!
HELP
Issues
Ok, here is what I've learned (which isn't much) so far:
I'm using a T-Mobile MDA with the stock firmware. I am trying to connect to Exchange Server 2003. I've seen the server options grey out as well, but the trick I've used is to configure the server options in Active Sync on the pc you have it connected to. The Windows Mobile version of Active Sync doesn't seem to play as nice at times.
Starcruzier--
Thanks for the suggestion, but I have tried that as well. I actually went through the same steps with a T-Mobile SDA on trial as well. When I do the steps that you outlined on both devices, I actually pull down all the mail...but I get no new messages as they come (and I did configure the SMS to send "As they arrive".
I'm starting to think this is more of an issue with either Active Sync, Exchange, or how T-Mobile handles push email from Exchange.
I honestly dunno about qtec, I have a T-mobile MDA. I am running rom version 2.26.10.WWE (just upgraded...) and I am using the Microsoft Direct Push (no SMS required... ) What rom are you using, and are you using the direct push or the SMS method (as I believe they work differently...) You can get the rom I have from a link in this thread:
http://forum.xda-developers.com/viewtopic.php?t=57554
although it is customized for T-mobile....
Question
I have a T-Mobile MDA as well. Star...did you get push email working with the stock ROM on the device?
Nope, when I got it push email was not supported by the default rom, and so I upgraded. I recently got a new one because the old one broke, but I believe that I upgraded this one before I tried to setup the push, so I dunno if it is supported by the default rom, or how well this works... hope this helps...
Starcruiser1229 said:
Nope, when I got it push email was not supported by the default rom, and so I upgraded. I recently got a new one because the old one broke, but I believe that I upgraded this one before I tried to setup the push, so I dunno if it is supported by the default rom, or how well this works... hope this helps...
Click to expand...
Click to collapse
That's easy to find out - in ActiveSync on the device, set the schedule to "as items arrive". If you've got AKU2 on the device, it should NOT ask you for a unique device address.
You can also make sure by going into settings > system > about; my OS shows as "OS 5.1.195 (Build 14955.2.3.0). Afaik, that means I have AKU 2.3 on the device. You need at least AKU 2 for DirectPush to work. Oh, and Exchange 2003 SP2 on the server.
Did everyone else just setup DirectPush and recieve emails straight away, or is it just me with the problem?
Does ISA effect it??
ellisjacklin said:
Did everyone else just setup DirectPush and recieve emails straight away, or is it just me with the problem?
Does ISA effect it??
Click to expand...
Click to collapse
If you get the folder structure, ISA should not be the problem. And yes, DirectPush works right away; if you have AKU 2.x on the device and when connecting to the server it determines that the server supports DirectPush, it should work at once.
Of course, DirectPush can be disabled in the Exchange System Administrator console. That would explain the effects you are experiencing.
Do you mean the tickbox 'Enable DirectPush' in Exchange Manager?
This is enabled on the Front End and main Exchange servers..
ellisjacklin said:
Do you mean the tickbox 'Enable DirectPush' in Exchange Manager?
This is enabled on the Front End and main Exchange servers..
Click to expand...
Click to collapse
Yes, that's the one I meant. Did you increase the timeout on the ISA server to 1800 seconds (30 minutes)? Does it work with other Windows Mobile devices? Does your mobile operator maybe not support persistent connections?
I have just set this for Outgoing and Incoming to 1800.
Tried my PDA and it still does the same thing, shows me how many it needs to download (which is nice) and then decides not to download them.
Vodafone (provider) tell me as long as Internet APN is active, which it is, it should be fine.
ellisjacklin said:
I have just set this for Outgoing and Incoming to 1800.
Tried my PDA and it still does the same thing, shows me how many it needs to download (which is nice) and then decides not to download them.
Vodafone (provider) tell me as long as Internet APN is active, which it is, it should be fine.
Click to expand...
Click to collapse
Somewhere in ActiveSync, you can set the debug level to "verbose". Does it tell you any more when you set it that way? Also, on the backend Exchange Server (where your mailbox resides), check the entries in the IIS Log (%systemroot%\system32\Logfiles\w3svc1\exYYMMDD.log - assuming it runs in the default Web Site, else w3svc1 will be something else). Do you have IIS Lockdown installed on the server? What happens if you sync manually, does that work? In the settings of the user (Active Directory Users and Computers), are the Exchange features pertaining to Active Sync activated?
I have set this to Verbose, cant see any effects of it though..?
If I sync manually, it tells me what there is to download, doesnt download them, then goes again and does 0/1 on everything. And ends seemingly normal bringing nothing down.
I have lots of log entries relating to the GET and PROPFIND from ActiveSync in the log but I cant see anything displaying a problem.. everything seems to be communicating but just not bringing down the emails..
User Enabled Syncronisation is set against the user on AD.
ellisjacklin said:
I have set this to Verbose, cant see any effects of it though..?
If I sync manually, it tells me what there is to download, doesnt download them, then goes again and does 0/1 on everything. And ends seemingly normal bringing nothing down.
I have lots of log entries relating to the GET and PROPFIND from ActiveSync in the log but I cant see anything displaying a problem.. everything seems to be communicating but just not bringing down the emails..
User Enabled Syncronisation is set against the user on AD.
Click to expand...
Click to collapse
After enabling verbose and trying one sync, what does it show when you hit "view status" in ActiveSync? Also, is it possible that you have policies in Exchange 2003 in place and your device is not compliant (e.g. no/too short password)?
Ive tried Verbose and no error is displayed, everything ends normal on Sync.
It is strange that you can send emails from the device no problems, so I assume the device is compliant. I have tried a HP PDA and have the same problem.
hi all,
i have an unlimited GPRS plan and hence connected 24 hours....
however, this uses up a lot of battery and frankly, there are times when i do not wish to be online!
problem is, even if i disconnect the GPRS, it reconnect automatically after a while.
is there any way to prevent the phone to auto reconnecting?
Search the forum for the modaco nodata cab file
This great tool lets you toggle on/off the connections.
For easy use, you can create a shortcut for it on your today screen and toggle it on/off whenever you want
Hope this helps
link in my signature
Do you use an exchange server? If you do, it may be due to Active Sync trying to connect to the exchange server.
pfft.. you think GPRS is bad? try EVDO.. my 6700 barely lasts a day (with Activesync/push email)
you could also use a combination of mortscript and vijay555's VJVolubilis to disconnect qutomatically at a time or period (ie, every 10 mins) you define
bbobeckyj said:
link in my signature
Click to expand...
Click to collapse
is there any reason nodata would give an error on a wm 6.0 standard device?
Alkemist said:
is there any reason nodata would give an error on a wm 6.0 standard device?
Click to expand...
Click to collapse
the only error that i know of is when the phone has no data connection details on it, ie a custom rom which does not include gprs settings, it will give an error until you add the settings.
use something like Advanced Config... You can disable GPRS somewhere in this program... It has many other stuff you can do with your phone...
Hi,
My second problem is that my Iolite activate data connection by itself like it was trying to download or uploade something (MMS or something), but the connection stay alive for a long time and nothing happen.
When I turn off data connection, it turn on again in a few minutes.
To avoid costs I use program which disable all configured data connections (program called "NoData"). But when all connections are disable, my Iolite don't turn off the screen and backlight after inactivity time.
I think that the reason can be in Microsoft Direct Push, but I don't use it.
This article is similarity to my problem: http://khason.net/blog/how-to-disable-exchange-security-policy-for-windows-mobile-devices/
The problem apears today. I have my Iolite for 2-3 weeks.
Help me please... It's so frustrating...
Radek
snorek said:
Hi,
My second problem is that my Iolite activate data connection by itself...
Click to expand...
Click to collapse
... first read, then post. Nobody will write the same problem a second time. Here the link (5 or 6 themes under yours): http://forum.xda-developers.com/showthread.php?t=524825
mirko.prinz said:
... first read, then post. Nobody will write the same problem a second time. Here the link (5 or 6 themes under yours): http://forum.xda-developers.com/showthread.php?t=524825
Click to expand...
Click to collapse
The topic you have paste is about totally different problem.
I'm not looking for program which can turn off unused connection, but I'm looking for a reason of unexpected turning on data connection.
snorek said:
The topic you have paste is about totally different problem.
I'm not looking for program which can turn off unused connection, but I'm looking for a reason of unexpected turning on data connection.
Click to expand...
Click to collapse
I think, AdvancedConfig will be the right decision. Found it here.
Iolite comes with some apps, which use Data connection. For example Weather (default setting is to update it no matter what) or QuickGPS (downloads sattelite position info). Also when you are browsing via WiFi or ActiveSync, it might sometime disconnect and Data connection is automatically started.
Microsoft DirectPush is used with Exchange server (for example, I use it with my company email) and you must configure it. It is not enabled by default. Anyway, when I don't want to check email all the time, I just disable DirectPush and it stays disabled.
You also might to check, what app is using your DataConnection. Try SPB Wireless Monitor (I think it is trial), which can show you, what app is using which connection.
mirko.prinz said:
I think, AdvancedConfig will be the right decision. Found it here.
Click to expand...
Click to collapse
I have this program install already, but I don't see any option which can help me.
Any suggestion?
torrentonly said:
Iolite comes with some apps, which use Data connection. For example Weather (default setting is to update it no matter what) or QuickGPS (downloads sattelite position info). Also when you are browsing via WiFi or ActiveSync, it might sometime disconnect and Data connection is automatically started.
Microsoft DirectPush is used with Exchange server (for example, I use it with my company email) and you must configure it. It is not enabled by default. Anyway, when I don't want to check email all the time, I just disable DirectPush and it stays disabled.
You also might to check, what app is using your DataConnection. Try SPB Wireless Monitor (I think it is trial), which can show you, what app is using which connection.
Click to expand...
Click to collapse
Yes, I know that. I turn off weather updater and quickgps (and footprints or something) first day. And I don't have any problem till today.
But what is strange: after disable all data connections some program prevent screen from switch off...
OK, I'll try SPB Wireless Monitor.
Just an idea. Aren't you using CorePlayer or TCPMP? CorePlayer can use network and data connection and also it can override display sleep time.
Advanced Config
in "data connections":
- GPRS auto attach: disabled
Manila TF2D
in "Weather tab"
- menu -> settings -> disable "automatically download weather data"
Settings (Start -> Settings -> System
in "location settings"
- disable AGPS
Messaging
- disable the automatic e-Mail-Download (when it is enabled)
I hope, that will help.
Greetings
edit: OK, i wrote to slowly - 2 posts are come ;-)
torrentonly said:
Just an idea. Aren't you using CorePlayer or TCPMP? CorePlayer can use network and data connection and also it can override display sleep time.
Click to expand...
Click to collapse
I think, isn´t so, i use this programm to.
SPB Wireless Manager show me that Palringo was the problem. I've unchecked "run at startup" after first run of Palringo, but it checked again without informing me
THX for help all of you
I hope that Palringo was the only reason
Tell me please, what is Palringo?
Thanks!
mirko.prinz said:
Tell me please, what is Palringo?
Thanks!
Click to expand...
Click to collapse
Palringo is powerfull ane free multi-platform instant messaging client. You can sent text, images and voice messages.
It support:
Windows Live Messenger ® (MSN)
AOL ® Instant Messenger (AIM)
Yahoo! ® Messenger
Google Talk ™
ICQ ®
Jabber ®
iChat® / MobileMe ®
QQ ®
Gadu-Gadu ®
Facebook Chat (Alpha)
More info: http://www.palringo.com
Aha, thank you!
Greetings
Dont worry
My Iolite also connect itself to the internet, but i use my iphone 3g sim with it, internet for free XD
cturpel: What's the point of your post?
cturpel said:
My Iolite also connect itself to the internet, but i use my iphone 3g sim with it, internet for free XD
Click to expand...
Click to collapse
Great So go abroad