Related
I'm pretty sure the following tip is accurate. I received yesterday a new HD, my first having broken just by pressing the screen! I was very relieved that just by reinstalling from memory card all my apps, that the apps settings were still valid - I didn't fancy having to go all through setting up tomtom again with pocketgps camera database and warning tones.
However I did notice that after switching Tomtom on, it was hit and miss whether my unit found any satellites. By going into the satellite status screen, I could see that the software would access the satellites for a few seconds then lose them again. I also noticed that a fix for this was to run google maps first and turn on gps from there.
This was strange, since my previous HD, locked on within seconds every time. Hardware issue? Maybe, but thought I'd try to remember anything I hadn't done on my new HD that I had on my old.
"Ha-Ha" I thought, I haven't run the connection wizard, and this is sort of a connection issue.
Start --> Settings ---> Connection ----> Connection Set Up-----> Tap O.K. ----> restart
Now TomTom works perfectly and picks up connections immediately without google map initiation.
Try it if you having similar troubles!
cheers,
mooro
For me this must be a placebo, neither do I understand why the connection setup has anything to do with the gps chipset, nor does it work me. I have configured my connection using the connection setup and nevertheless I have some gps drops with iGO.
I think this gps drops have some other background, I will try a new radio version. Some people also said that it might help to change the polling interval, but for me neither an increase nor a decrease of the interval has changed anything about it.
Not a placebo for me, is working perfectly now.
mooro1973 said:
Not a placebo for me, is working perfectly now.
Click to expand...
Click to collapse
Nobody has said that placebos don't work, but the reason why they work is controversial. Maybe you have done something else, because I really can't imagine how the connection setup could fix a problem with the gps.
However, its good to know that it runs for you, maybe it will work for me with the new radio also.
How about this theory:
Because you did not do the connection setup yet, the GPS Quickstart had not run yet. So no almanac of GPS satelite data existed yet, meaning it was an icecold start?
And Google Maps worked faster because it is using the 'about' position of the GPS towers to bootstrap the location?
Placebo works only for those that believe in it!
This device is A-GPS capable.
Don't know whether e-plus supports A-GPS services but in theory this might be a clue
I have tried all of the above and still I cannot get GPS to work
If I open google maps it just keeps searching with indicayor showing no satellites.
When using TomTom it displays a number of satellites but all appear grey and none become active
Advice welcome
Fallen Spartan said:
Advice welcome
Click to expand...
Click to collapse
It may be too obvious to mention, but: Did you try this outside with a good sky view? Cold start is always a bit more tricky.
Fallen Spartan said:
I have tried all of the above and still I cannot get GPS to work
If I open google maps it just keeps searching with indicayor showing no satellites.
When using TomTom it displays a number of satellites but all appear grey and none become active
Advice welcome
Click to expand...
Click to collapse
have you tried start ---> settings ----> external gps --->access---> check manage gps automatically?
and in google maps, options-->gps settings---> toggle auto/windows?
I am fairly sure intermittent gps is a memory problem of some sort. I used to get that a lot running IGO. Now I kill TouchFlo every time before running IGO, and even thought the problems still happens sometimes, it is clearly much less often. You can find the description of how to kill TouchFlo using Mort script in IGO thread. This makes the whole thing clearly better (not perfect).
mooro1973 said:
have you tried start ---> settings ----> external gps --->access---> check manage gps automatically?
and in google maps, options-->gps settings---> toggle auto/windows?
Click to expand...
Click to collapse
It may be too obvious to mention, but: Did you try this outside with a good sky view? Cold start is always a bit more tricky.
Click to expand...
Click to collapse
Tried both of these.
Yes I can see that satellites are being picked up but both google maps and tomtom don't fix onto any of them. They all just appear grey
Maybe you should try a tool by htc to try and wakeup your gps. Run the file on your HD and from function menu select chip and then q7200. Choose port 4 and baud rate 4800. Then open the port and wait for a gps fix. After that close the port and exit the gps tool. Then run your gps navigator and see if it works!
Hi,
I had issues with GPS and tomtom 7.
I discovered that it was caused by a modification I did to the registry with HD Tweak.
Here is what I did:
going thru the settings with HD Tweak I seen that default value for AGPS was Disabled so I decided to set it to enabled it as I now the phone is capable of it.
After that The GPS would only work once with tomtom, if I closed tomtom and re open it again it GPS would not be found, I had to reboot the phone for it to work again (for an other single use).
I restored the AGPS value to Disable with HD Tweak and everything worked perfectly after.
Though I noticed that tomtom will still use AGPS when GPS sensor is down, but I can say if this is how it used to worked before the registery tweak because I did the tweak immediately after installing tomtom.
I had a similar problem with Advanced Config after I turned on Quick GPS Fix, turning it off seemed to fix it.
michael_r said:
I am fairly sure intermittent gps is a memory problem of some sort.
Click to expand...
Click to collapse
I don't think so. My "fix" (as I reported in another thread) is to change baudrate in IGO GPS configuration. After one or few baudrate change, the connection is stable.
No one as reported this fix not working.
So it seem a virtual COM port issue..
rushmpeg said:
Hi,
I had issues with GPS and tomtom 7.
I discovered that it was caused by a modification I did to the registry with HD Tweak.
Here is what I did:
going thru the settings with HD Tweak I seen that default value for AGPS was Disabled so I decided to set it to enabled it as I now the phone is capable of it.
After that The GPS would only work once with tomtom, if I closed tomtom and re open it again it GPS would not be found, I had to reboot the phone for it to work again (for an other single use).
I restored the AGPS value to Disable with HD Tweak and everything worked perfectly after.
Though I noticed that tomtom will still use AGPS when GPS sensor is down, but I can say if this is how it used to worked before the registery tweak because I did the tweak immediately after installing tomtom.
Click to expand...
Click to collapse
Yeah !!! Seems to work on my side !! I just spent minutes fighting with my HD this afternoon, still loosing the GPS device... I had to activate one other GPS app to make it work. Now I just changed this setting and it seems to work !!
Thanks for the info ! You're my king
Worked for me by turning off a-gps in HD Tweak and enabling it through the gps app on the rom.
after flashing the 1.10.25.25 radio on my HTC diamond, The GPS signal goes on and off, on and off....continuously on the TomTom GPS status. it was strange, I have to use QuickGPS to download the data again on open air to get the signal on continuously again. If I download the data inside my house, it just go on and off again when I use it on open air.
Hi,
are there any application to control different phone profile.
i would like to have at least three profile
a) in my home phone should ring, wireless connection should be via desired wifi connection (blue tooth and data connection via tmobile should be disable)
b) when i am in the car I need blue tooth enable, wifi disable
c) when i am at work, bluetooth disable, wifi disable, and data connectin via tmobile disable.
etc...
please advice me whether there is a application to do this.
thanks
ooo7
Toggle Settings from the market seems to do most of this, although not sure about turning off the data connection. You can set it to 2G though.
I think Locale would do some too - it can be set to behave in a certain way when at a certain location - I've NEVER used it though, just read about other users using it for this kind of function so check it out
hi,
thanks for your quick responses.
yes local will do some of it, but i mainly needed to change profile as an when i needed, i.e. not based on geographical location.
if you come across any other application please let me know. i am sure this sort of application will be really useful for lot of other people.
regards
ooo7
You can also try "Ear" it does almost everything except the data connection part
the 5 widgets you can get (hold finger on empty space -> htc widget -> settings) will do this... sure, you don't get the benefit of pre-sets (there _will_ be an app that will do this, somewhere) but it's totally flexible
you can certainly do the "wifi on / bluetooth & data off" and vice versa for leaving the house via locale... might be able to get by with manual toggles after that (or also have a location for work)
location works great!
try it!
I wrote a program (TrackMe) that turns off the screen while the GPS keeps running. However, on this PDA the GPS disconnects. As far as I know this is the only PDA that shows this problem.
I have also tried with other programs and I still have the same problem.
As soon as the screen is off, the GPS also disconnects.
Do you guys know if there is registry hack or something to avoid this?
Thanks
Don't know about any way of disabling this but can confirm that if garmin xt is running and i lock the phone, it speaks "lost satellite reception" as well.
Thanks for replying.
Yes, I tested Garmin XT and Route66 and I got the same problem.
There has to be a setting or something on Windows Mobile to disable standby state when turning off the screen.
In case somebody in interested on this... if you use the GPS Intermediate Driver instead of a COM port directly, the GPS will not disconnect.
Is there any way to turn off/on the GPS on this thing.
Cant find the option under settings, and dont know where else to look.
As long as there is no program that uses the GPS hardware, it's virtually disabled.
is there any visual indication weather or not it is being used?
I have HTC Dream, and in settings you can actually Disable GPS.
I would like to be able to force it off.
The root of the last update made me to do many mistakes and I had to initialize my kindle. Again the hard work of installing and tricking old programs that worked well.
All fine until I tried my bluetooth GPS dongle. With the other versions of rom it was rejected as an unsupported device, stopping pairing after a few seconds, needing other utilities to make the pairing stable. Now it paired well, at first try, but on the other side "Bluetooth GPS Provider" by Mobilej.de, the app that used to work, now crash all the time. This app used to work perfectly if installed in the System folder /app and annulling the "Force GPS Position" option, but not now.
Other app with the same name but from Michael Chourdakis(TurboIRC.com), that refused to work with 7.2.3, now runs, although is a more basic program.
Does it happens to someone else?
gflorezarroyo said:
The root of the last update made me to do many mistakes and I had to initialize my kindle. Again the hard work of installing and tricking old programs that worked well.
All fine until I tried my bluetooth GPS dongle. With the other versions of rom it was rejected as an unsupported device, stopping pairing after a few seconds, needing other utilities to make the pairing stable. Now it paired well, at first try, but on the other side "Bluetooth GPS Provider" by Mobilej.de, the app that used to work, now crash all the time. This app used to work perfectly if installed in the System folder /app and annulling the "Force GPS Position" option, but not now.
Other app with the same name but from Michael Chourdakis(TurboIRC.com), that refused to work with 7.2.3, now runs, although is a more basic program.
Does it happens to someone else?
Click to expand...
Click to collapse
Yes hello, this exact same thing is happening for me...
Prior to this new firmware update, I had been using a Global Sat external gps with Bluetooth GPS Provider (Mobilej.de) and it had successfully connected and gained location activity, after enabling mock settings with "KFHD xSettings", for use with maps applications (in my case for aviation moving maps Avare & Air Navigation Pro). Now with the recent 7.3.0 update, this no longer works and the Bluetooth provider app immediately has lost connection and is stopped. Additionally, these apps continually tell me that location-provider setting is turned off, even though it is shown as "ON".
Have you found a work around yet for this update? Are you saying that the other app by Michael Chourdakis is working and providing gps connection?
Yes, it fails one or two times to connect, you must insist. Then suddenly, it links and begins to receive coordinates and stay connected properly.
You must let it in the background like the other app.
Now, way to home, I will prove its accuracy...
I forgot the link to the app:
https://dl.dropbox.com/u/54456659/turboirc.btgps.apk.zip or http://ubuntuone.com/3yq3ZJKWIvB7Rss37BFE1k
edit: (thanks to prokennexusa)
hello thanks for the app link!
I just tried it after installing in \system\app folder. it does establish connection and says it receives coordinate information, but when I open map applications they say no location available. Or no GPS service.
Are you getting the same? have you successfully used a gps application with your bluetooth dongle?
It is not necessary to install it in System/app but if it works for you...., Once you see the name of the dongle and the coordinates, you must exit with the home button, not with the arrow one, to make the app run in the background. Edit: no, it doesn't closes by itshelf. Is necesary to stop it in configuration....
Then, sliding down the finger by the upper part of the screen you can see a notification that the GPS is working and an GPS icon near the bluetooth symbol is visible. Edit: No, is the android system who shows that alerts when the navigator(whichever you use) request "location" ...
Yes, I have "Mock locations" activated with "KFHD xSettings" (courtesy of 0xD34D), but it works for me with or without "internal location-provider" set.
-
I'm testing now the "Alpine quest hiking" app, but by the day I will do with Tom-tom.
The experience has been a bitter relief, as this "Bluetooth GPS Provider"(Turboirc) app seems to be the only remaining solution to tie GPSs and Kindles, but the program hasn't options and loses signal occasionally, just only a second fortunately. Accuracy is good.
-
The "original" "Bluetooth GPS Provider"(Mobilej) behaviour has changed, in doesn't hangs now, only announces that has been closed and, curiously only if you install it normally(not system/app), lets you a feedback with the creator to send him errors. I will prove if he or they can fix it in between.
later I will show more tests....
Route 66 hangs with or without WIFI (I set it off to secure there is no "wifi location") in the precise moment I run "Bluetooth GPS Provider"(turbo irc). With the earlier updates it worked good with "Bluetooth GPS Provider"(movilej.de).
-
It seems that the turboirc version does something wrong when injecting coordinates to the android system.
GPS update 7.3.0 very good .But hope to soon have CM10.1 . Many thanks Hashcode :victory:
gflorezarroyo said:
Route 66 hangs with or without WIFI (I set it off to secure there is no "wifi location") in the precise moment I run "Bluetooth GPS Provider"(turbo irc). With the earlier updates it worked good with "Bluetooth GPS Provider"(movilej.de).
-
It seems that the turboirc version does something wrong when injecting coordinates to the android system.
Click to expand...
Click to collapse
^Exactly...I believe I am having the same issue with the turboirc version not feeding gps information. I got it to connect with position initially but does not continually update data in intervals like the mobilej.de version had. As a result, the gps apps get hung up or stop without this feed of coordinate data.
i suppose I will just use my phone in the mean time, until maybe a new firmware update will change this issue!
I've sideloaded Avare, a free superb navigator, for planes!. It doesn't reads the "GPS Provider" app, but neither hangs. Tomtom seems to work, but its raining here and the test must wait to my way home, later.
By car, friends....
hokie152 said: "Exactly...I believe I am having the same issue with the turboirc version not feeding gps information"
Not so easy, it seems some apps see the information and others no. "Alpine quest" works, so the provider app is feeding.
hokie152. If you need GPS to fly, do it as you said by tethering from your phone.............. or downgrade to 7.2.3 and lock updates.....
quan_1986 said:
GPS update 7.3.0 very good .But hope to soon have CM10.1 . Many thanks Hashcode :victory:
Click to expand...
Click to collapse
But be aware of Bluetooth not working properly, yet (Bug)
Definitively Tomtom works with "Bluetooth GPS Provider"(turboirc) on 7.3.0. Has the same glitches every now and then like Alpine Quest, but it brings you to home and alerts you of radars.....
Another bluetooth gps provider named..... BlueGPS4android, installs but I cant make it work:
http://sourceforge.net/projects/bluegps4droid/?source=dlp
Bluegps4android works in my phone, but all versions offered refuse to tie in Kindle.
-------------------------------------------------------------------------------
I've find an app that connects DIRECTLY with the GPS dongle without a provider app. Its name is Trekbuddy, side-loaded from Google Market.
Is a complex program that needs some study, but apparently it works, I don't know if can be used to fly....
To hokie152:
I've installed Air Navigation Pro, and it seems to react and receive some coordinates if you have set "wifi location" with or without wifi. Later I'll take the car and test it. My bluetooth dongle is a cheap and outdated Zaapa Touch(only 5 euros!).
Air Navigation Pro works, but suffers occasionally the same loss of data failures, causing the little plane in the screen turn as a weathervane moved by a whirlwind....But it runs.
gflorezarroyo said:
Air Navigation Pro works, but suffers occasionally the same loss of data failures, causing the little plane in the screen turn as a weathervane moved by a whirlwind....But it runs.
Click to expand...
Click to collapse
I will try connecting Air Navigation Pro using Bluetooth GPS Provider by turboir and see if I have the same results "with or without WIFI". I have seen the little plane before rotate in circles when you stop moving (at zero velocity). It displays your location but has no direction of motion so it cannot hold a proper heading. Thanks!
I mean that I think this program inject coordinates(mock locations) to the system, so its necessary that location services are working, ie the approximate location by wifi used by our Kindle. Happy Fly!
-
Now I'm making a map of my way to home to test Trekbuddy reading directly from my dongle gps..... to test if it isn't guilty of the glitches.