Quick missed call question - 8125, K-JAM, P4300, MDA Vario General

Ok, so I just went back to TMO service in the US (after being on Fido in canada) and people are having serious issues trying to call me. Sometimes, it tells them the number is unavalible, sometimes it rings through to VM without me hearing a ring at all...etc.
My question is this:
Is this a TMO service issue or my radio rom/phone?
I have good to full signal on my MDA, I'm using WM6 (1.7 Reload), with my old 2.25 Radio GSM ROM, I can call out just fine and it sounds good (as does a incoming call if it actually makes it through), and it worked great in Canada (different WM5 but same radio).

t's your radio ROM version. Try either 2.19.11 or 2.69.11 and the problems should stop. Personally I use 2.69.11 because it seems to get better reception than 2.19.11.
P.S. I just answered this same question from someone in this same forum 2 posts up so I just copied and pasted the answer again.

Thanks! I'll go look for the Radio ROM now. Cheers!

No problem. If you haven't found the Radio ROMs check the wizard wiki, most of them are there.

Related

Tytn Dropping Calls Like Crazy...

Ok, I'm fed up now. My Tytn is dropping a ridiculous amount of calls lately, and I'm tired of it. I've set it to use GSM/GPRS only, so it's not an issue of switching between 2G and 3G.
My current ROM info is in my signature. I've been avoiding going to another ROM because I would never be able to go back to the original Tytn one if I wanted to. But now, I'm ready. I'm tired of the dropped calls.
So, with that being said... please, give me your suggestion of what ROM I should upgrade to.
Many thanks in advance,
SP111
Sleuth,
If you happen to read this, I'm interested in hearing about your setup as shown in your sig.
I'm using Dopod's Rom (Not the AUS one), it's quite good, snappy responsive. Once a while crashes if i leave wifi on over night, otherwise very stable. as for voice quality, it's amazing, havn't had problems with dropped calls. Before you change ur rom, i'd suggest u check that it's ur provider and not your fone. when u sure it's ur fone, try the dopod rom.
SP111,
I am experiencing the same problem. I am using the 8525. I changed SIM cards and that did not help much.
Hope to see what others think...
Wondermutt
__________________
Cingular 8525
Rom 1.34.502.1 (stock)
Radio 1.16.00.00 (stock)
Put you SIM card in another phone (Nokia OR SE) and see if you face same problem, if yes, then it is RADIO signal problem in your Area. Otherwise the choice is in your hand to proceed for ROM upgrade on TyTn for Radio only. (See WiKi Pages for ROM Upgrade Radio Ver. 1.20.31.10).
why dont you try the new ROM 1.35????.
there are good comments about it. I will upgrade my vodafone v1605 to it..
good luck
ASZ
For me is was a matter of which provider I used. I switched to another (from Tele2 to Telenor, if you're Norwegian ) and I never had that problem again...
Sorry, I should have been more clear about one point... I still have my Cingular 2125 (HTC Faraday) as well as my old Audiovox SMT5600, and I have tested these phones with my SIM, and do NOT experience problems with dropped calls. So I'm pretty sure it's the Tytn.
My TyTN is on Cingular. I've never had a dropped call. I do have some issues picking up calls though. Interestingly, I the same issues with my Cingular 8125 (wizard).

Post your Bugs/Issues for ROM upgrade 1.35

Thought I'd start a thread where people can post there issues/bugs on ROM upgrade 1.35 and it will also help people to make an informed decision before upgrading to this ROM.
I have now used this ROM on my SPV M3100 for over several weeks and the only issue I have is when using my 3 network USIM the voicemail speed dial 1 does not work even after going through the settings or registry the bizzare thing is I don't get this issue with other network SIM i.e. O2, Orange or T-Mobile.
P.S. before someone says I may have a faulty 3 USIM, I did not have this issue prior to this upgrade.
Is the 1.35 Rom different from?:
http://forum.xda-developers.com/showthread.php?t=294927&highlight=issues
The HTC ROM 1.35 is different from the cingular ROM 2.06, it's supposedly the most stable of the ROM upgrades or so they say!
I haven't any issue, Radio & ROM 1.35 ... i've read someone has problems with messaging service...
Using a Task Manager ONE TIME only i've seen the Messaging Service stopped, just a reboot.
now works well, bt, wifi & radio
and what happend, when you try to change the very first contact on sim? I had similar problem, but on old nokia phone, not windows nor symbian.
gfreek said:
Thought I'd start a thread where people can post there issues/bugs on ROM upgrade 1.35 and it will also help people to make an informed decision before upgrading to this ROM.
I have now used this ROM on my SPV M3100 for over several weeks and the only issue I have is when using my 3 network USIM the voicemail speed dial 1 does not work even after going through the settings or registry the bizzare thing is I don't get this issue with other network SIM i.e. O2, Orange or T-Mobile.
P.S. before someone says I may have a faulty 3 USIM, I did not have this issue prior to this upgrade.
Click to expand...
Click to collapse
Would the HTC 1.35 ROm work on the Cingular 8525?
loud busy tone even if Phone is on loudness=0
i have some problems with this Radio 1.35.00.11. The thread is about that, isn´t it?
First of all my phone beeps loud out of the speaker at the back(the loud one for "free speaking") if the Person iam calling is not available (busy signal). Even if the Phone is turned to loudness 0! Iam not sure that the Radio Rom is responsible for that, because i reseted my vario2 completely. But iam sure that problem i never had before(with the german origninal Radio ROm).
*edit* iam currently reading that this is not a problem from the Radio Rom... The extRom may be responsible. Sorry!
But please help me the following Topic:short: is it possible to flash to an older RadioRom?
*/edit*
Because of that i wanted to flash the 1.27. Radio ROM to the Vario2. I took this one: ftp://xda:[email protected]_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe
The flashing procedure got complete without any error, but on the Vario iss still the 1.35.00.11! Isn´t it possible to flash to a older Rom Version?
Thanks for help!?

Big problem SPV M3100

Hi im new so if break any rules sorry. I have SPV M3100 with blackdiamond on it, unlocked, but when i want make a call phone starting connecting and after 2 sec break connection. Also if someone call to me they can't. Please help me. Sorry for my language im Polish and my english writing skills are not very good
is that mean that i can't get any help and i may throw out my phone. please if anybody have idea. that is on my phone ROM version Black Dymon ROM Date 01/04/07, Radio version 1.41.00.10 Protocol version 32.74.7020.18H
No this doesn't mean you have to throw your phone out. You just have to be a little more patient.
The people who use this forum aren't all from the same timezone and don't all have the ability to read this from work so it may take a couple of days to get a response.
I haven't done what you have some unable to help. Just don't get despondant that have you haven't had a response yet.
I've heard mixed reports of the 1.41 radio - some good and some bad. I tried 1.41 but eventually went back to the 1.38 radio because it is the most stable in many of the countries I work in. I didn't use the 1.41 radio in Poland but did have problems with it in Czech republic which is why I downgraded.
There are reports of dropped calls for this radio in this thread http://forum.xda-developers.com/showthread.php?t=303378 so it may be a good idea for you to read through that.
Personally, I'd drop down to radio 1.38.00.10 - get it here http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms,
BUT before you change the radio, make sure you have Hard-SPL 2.10 http://forum.xda-developers.com/showthread.php?t=296722 because this will help you recover your phone if something goes wrong.
It's still the same my phone can't make a call always drop after few seconds, i change ratio on 1.38.00.10 and 1.38.00.01 latest UK because I'm in Scotland right now and still is the same, meaby there is a chane to clean everything and upload on my spv again, if yes please for a tip how to do thant, or any difrend idea? Please help me because i start losing my mind and i have latest hard SPL by the way.And alsow i have reception on my phone everything sims ok but i can't make a call.
Scotland
der_Tiger said:
It's still the same my phone can't make a call always drop after few seconds, i change ratio on 1.38.00.10 and 1.38.00.01 latest UK because I'm in Scotland right now and still is the same, meaby there is a chane to clean everything and upload on my spv again, if yes please for a tip how to do thant, or any difrend idea? Please help me because i start losing my mind and i have latest hard SPL by the way.And alsow i have reception on my phone everything sims ok but i can't make a call.
Click to expand...
Click to collapse
Hi der_tiger,,, I've been playing about with black Dymond and various Radios in Scotland with varing results.. IMHO generally all the 1.4# radio Roms had issues with missing calls dropping radio signals etc.. I've reverted back to 1.38.00.10 as it seams the most stable for us in jock-land.
Once you've reflashed your rom I would recommend you reflash black Dymond, I always get a more stable system by reflashing the System ROM "AFTER" i change the Radio rom.....not sure why.
Oh one other thing I noticed, this might just be an Orange thing, but If I manualy select the network ie in my case Orange rather than the phone Auto selecting networks I don't get any issues with signal drop-outs !!!! go figure !!
anyway hope this works for you too
Hi it's me again i have big favor to you mates. Can someone may send me on my e-mail [email protected] his own rom an configs from SPV M3100 with working in UK, please because i try everything and my phone still don't wand make a call.

Delay in call reception in pda2k

My pocket (pda2k) have a problem I hope any one help me to solve this problem
1. Many times my phone out of service but I have good network (service provider) signal
2. some times when i am need to make a call I have a message inform me that there is no signal but I have good
3. when any one call me I receive this ring after 3-6 second and after the caller end the call my pocket still ringer for 3-6 second
which ROM are you using?
what's your device's radio?
my rom
BA_M2D_CE_OS_5.2.20275_(Build_20275.1.3.3)V3
and ithink for all rom
radio 1.15
now i use rom swampy395
can you sugested rom to me
Try using sun_dream's latest 6.1 rom (6.5 was removed). That should work just fine (I did not have that issue whatsoever). Good luck!
Yes try sun_dream's WM6.1. Very stable. Look HERE.

Touch HD conversation problem

Hello All,
It's good to find online such a great and evolving community.
I hope that someone in here can help me solve the issue that I have.
When I start a call, or a receive a call, sometimes the person I talk to says that they hear me very badly and it's droping, whileas I am hearing them crystal clear.
The problem was there still with the original 1.14 SPL and Windows Mobile 6.1 Professional Stock WWE.
Now I have upgraded to Dutty's latest R7 WM6.5, hoping that the new Radio ROM can solve my issues but unfortunately this didn't happen.
The Carrier I am using is Globul Bulgaria, and I have disabled the 3G/HSDPA feature and currently operating only in GSM ( 900,1800MHz bands) mode hoping that this will improve the quality of the signal and thus provide me better talking experience.
The interesting thing is, that I am not experiencing this problem all the time. In some cells it's ok and in others it's not.
I was thinking to take my phone to the service center here in Bulgaria, but decided to ask here first if anyone has experienced the same problem in other GSM networks or even found a solution to it.
Thanks all for the time.
Regards,
Lyuben Bahtarliev
Same here, take a look at your serial number, and also see this thread http://forum.xda-developers.com/showthread.php?t=476139
Thanks for the guidelines.
Excuse me for double posting it was difficult to find the thread when searching.
The conclusion is that I will need to flash my phone to factory SPL, Radio ROM and Windows and get it for repair.
What a shame...

Categories

Resources