Thought I'd start a thread where people can post there issues/bugs on ROM upgrade 1.35 and it will also help people to make an informed decision before upgrading to this ROM.
I have now used this ROM on my SPV M3100 for over several weeks and the only issue I have is when using my 3 network USIM the voicemail speed dial 1 does not work even after going through the settings or registry the bizzare thing is I don't get this issue with other network SIM i.e. O2, Orange or T-Mobile.
P.S. before someone says I may have a faulty 3 USIM, I did not have this issue prior to this upgrade.
Is the 1.35 Rom different from?:
http://forum.xda-developers.com/showthread.php?t=294927&highlight=issues
The HTC ROM 1.35 is different from the cingular ROM 2.06, it's supposedly the most stable of the ROM upgrades or so they say!
I haven't any issue, Radio & ROM 1.35 ... i've read someone has problems with messaging service...
Using a Task Manager ONE TIME only i've seen the Messaging Service stopped, just a reboot.
now works well, bt, wifi & radio
and what happend, when you try to change the very first contact on sim? I had similar problem, but on old nokia phone, not windows nor symbian.
gfreek said:
Thought I'd start a thread where people can post there issues/bugs on ROM upgrade 1.35 and it will also help people to make an informed decision before upgrading to this ROM.
I have now used this ROM on my SPV M3100 for over several weeks and the only issue I have is when using my 3 network USIM the voicemail speed dial 1 does not work even after going through the settings or registry the bizzare thing is I don't get this issue with other network SIM i.e. O2, Orange or T-Mobile.
P.S. before someone says I may have a faulty 3 USIM, I did not have this issue prior to this upgrade.
Click to expand...
Click to collapse
Would the HTC 1.35 ROm work on the Cingular 8525?
loud busy tone even if Phone is on loudness=0
i have some problems with this Radio 1.35.00.11. The thread is about that, isn´t it?
First of all my phone beeps loud out of the speaker at the back(the loud one for "free speaking") if the Person iam calling is not available (busy signal). Even if the Phone is turned to loudness 0! Iam not sure that the Radio Rom is responsible for that, because i reseted my vario2 completely. But iam sure that problem i never had before(with the german origninal Radio ROm).
*edit* iam currently reading that this is not a problem from the Radio Rom... The extRom may be responsible. Sorry!
But please help me the following Topic:short: is it possible to flash to an older RadioRom?
*/edit*
Because of that i wanted to flash the 1.27. Radio ROM to the Vario2. I took this one: ftp://xda:[email protected]_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe
The flashing procedure got complete without any error, but on the Vario iss still the 1.35.00.11! Isn´t it possible to flash to a older Rom Version?
Thanks for help!?
Related
Ok, I'm fed up now. My Tytn is dropping a ridiculous amount of calls lately, and I'm tired of it. I've set it to use GSM/GPRS only, so it's not an issue of switching between 2G and 3G.
My current ROM info is in my signature. I've been avoiding going to another ROM because I would never be able to go back to the original Tytn one if I wanted to. But now, I'm ready. I'm tired of the dropped calls.
So, with that being said... please, give me your suggestion of what ROM I should upgrade to.
Many thanks in advance,
SP111
Sleuth,
If you happen to read this, I'm interested in hearing about your setup as shown in your sig.
I'm using Dopod's Rom (Not the AUS one), it's quite good, snappy responsive. Once a while crashes if i leave wifi on over night, otherwise very stable. as for voice quality, it's amazing, havn't had problems with dropped calls. Before you change ur rom, i'd suggest u check that it's ur provider and not your fone. when u sure it's ur fone, try the dopod rom.
SP111,
I am experiencing the same problem. I am using the 8525. I changed SIM cards and that did not help much.
Hope to see what others think...
Wondermutt
__________________
Cingular 8525
Rom 1.34.502.1 (stock)
Radio 1.16.00.00 (stock)
Put you SIM card in another phone (Nokia OR SE) and see if you face same problem, if yes, then it is RADIO signal problem in your Area. Otherwise the choice is in your hand to proceed for ROM upgrade on TyTn for Radio only. (See WiKi Pages for ROM Upgrade Radio Ver. 1.20.31.10).
why dont you try the new ROM 1.35????.
there are good comments about it. I will upgrade my vodafone v1605 to it..
good luck
ASZ
For me is was a matter of which provider I used. I switched to another (from Tele2 to Telenor, if you're Norwegian ) and I never had that problem again...
Sorry, I should have been more clear about one point... I still have my Cingular 2125 (HTC Faraday) as well as my old Audiovox SMT5600, and I have tested these phones with my SIM, and do NOT experience problems with dropped calls. So I'm pretty sure it's the Tytn.
My TyTN is on Cingular. I've never had a dropped call. I do have some issues picking up calls though. Interestingly, I the same issues with my Cingular 8125 (wizard).
Hi im new so if break any rules sorry. I have SPV M3100 with blackdiamond on it, unlocked, but when i want make a call phone starting connecting and after 2 sec break connection. Also if someone call to me they can't. Please help me. Sorry for my language im Polish and my english writing skills are not very good
is that mean that i can't get any help and i may throw out my phone. please if anybody have idea. that is on my phone ROM version Black Dymon ROM Date 01/04/07, Radio version 1.41.00.10 Protocol version 32.74.7020.18H
No this doesn't mean you have to throw your phone out. You just have to be a little more patient.
The people who use this forum aren't all from the same timezone and don't all have the ability to read this from work so it may take a couple of days to get a response.
I haven't done what you have some unable to help. Just don't get despondant that have you haven't had a response yet.
I've heard mixed reports of the 1.41 radio - some good and some bad. I tried 1.41 but eventually went back to the 1.38 radio because it is the most stable in many of the countries I work in. I didn't use the 1.41 radio in Poland but did have problems with it in Czech republic which is why I downgraded.
There are reports of dropped calls for this radio in this thread http://forum.xda-developers.com/showthread.php?t=303378 so it may be a good idea for you to read through that.
Personally, I'd drop down to radio 1.38.00.10 - get it here http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms,
BUT before you change the radio, make sure you have Hard-SPL 2.10 http://forum.xda-developers.com/showthread.php?t=296722 because this will help you recover your phone if something goes wrong.
It's still the same my phone can't make a call always drop after few seconds, i change ratio on 1.38.00.10 and 1.38.00.01 latest UK because I'm in Scotland right now and still is the same, meaby there is a chane to clean everything and upload on my spv again, if yes please for a tip how to do thant, or any difrend idea? Please help me because i start losing my mind and i have latest hard SPL by the way.And alsow i have reception on my phone everything sims ok but i can't make a call.
Scotland
der_Tiger said:
It's still the same my phone can't make a call always drop after few seconds, i change ratio on 1.38.00.10 and 1.38.00.01 latest UK because I'm in Scotland right now and still is the same, meaby there is a chane to clean everything and upload on my spv again, if yes please for a tip how to do thant, or any difrend idea? Please help me because i start losing my mind and i have latest hard SPL by the way.And alsow i have reception on my phone everything sims ok but i can't make a call.
Click to expand...
Click to collapse
Hi der_tiger,,, I've been playing about with black Dymond and various Radios in Scotland with varing results.. IMHO generally all the 1.4# radio Roms had issues with missing calls dropping radio signals etc.. I've reverted back to 1.38.00.10 as it seams the most stable for us in jock-land.
Once you've reflashed your rom I would recommend you reflash black Dymond, I always get a more stable system by reflashing the System ROM "AFTER" i change the Radio rom.....not sure why.
Oh one other thing I noticed, this might just be an Orange thing, but If I manualy select the network ie in my case Orange rather than the phone Auto selecting networks I don't get any issues with signal drop-outs !!!! go figure !!
anyway hope this works for you too
Hi it's me again i have big favor to you mates. Can someone may send me on my e-mail [email protected] his own rom an configs from SPV M3100 with working in UK, please because i try everything and my phone still don't wand make a call.
Hi all the buddies out there...
Did anyone experience problem with making calls and receiving incoming calls? I tested the ROM without any add on application installed. When I call my mobile, the first attempt will not be able to connect and it will end up into my voice mailbox. Second attempt will wake up the phone and get connected. Sometime, first few calls will be also failed.
About making calls, sometime I can't dial out and need to try few times. It make me very frustrated with the problems of the basic function of a "phone". I really appreciate any suggestions or fixes you may be aware. Many thanks.
Make sure you hardreset with NO/YES/YES options.
Hard reset does not help at all
Hi,
Thanks for your reply. Of course I do hard reset everytime I upgrade my BA code and when I wanted to clean up my phone. This is a normal procedure.
I believe everyone who is using it as a phone will not live with the phone function problem. I would appreciate whoever ever experienced this problem and have the work around method can share with me. Billion thanks and hope I can really get a solution. It is really frustrating...
i read your previous posts (re WM5 roms), and it is puzzling why your unit exhibits problems on calls even then...
is your radio already v1.15?
I did not have any call function problem with the earlier version of WM5. Ever since I upgraded my WM5 to newer version, I started to have the phone's problem.
I tried to downgrade the radio firmware from 1.15 to 1.13 to 1.12.
1.12 so far give me the least problem. I experienced drop calls occasionally, but huge reduce in incoming call problem. I still can live with sometime cannot make outgoing calls. The most important, people can reach me more consistently.
I had this problem on Orange UK; a new SIM card fixed it. Try borrowing a SIM card from another phone and see if the problem still exists for you.
had changed to a new sim card but problem persist..I think will just throw away my BA...
Wouldn't be cheaper to go back to WM5 or WM2003SE, instead of [FONT="]throwing[/FONT] the BA...?
Downgrade radio
Or maybe downgrade your radio version?
I experience the problem with Radio 1.12.
When I upgrade to 1.15, the problem is gone.
Thanks to Helmi to give us this great ROM.
ericosusanto said:
I experience the problem with Radio 1.12.
When I upgrade to 1.15, the problem is gone.
Thanks to Helmi to give us this great ROM.
Click to expand...
Click to collapse
hello since I have problems with the sound of my BA can you please send me your complete software like : ROM, radio, and others so i can try to fix the sound rings and during the call volume too low...please
I've loved my Blue Angel for 2 1/2 years thanks to xda-developers, but right now I just wanna throw it away!
I have a Cingular SX66 (PH20B1) running WM6 from Xplode (6.00.00.WWE) and the radio 1.15. After I upgraded to WM6 everything was kind of OK I thought, until I realized that sometimes calls weren't getting through to me and I was getting 'No service' too often. That's when I upgraded the radio to 1.15. I was getting the no radio error, but I found through searching that if I soft reset and keep the phone charged the radio comes back.
Here's my problem.. even when the phone gets out of 'No service' and finds the network (even showing me full signal strength) I can't make calls! Calls won't come through to me! It's pretty useless as a phone, but it seems to be usually able to send text messages if I have the network. It takes endless soft resets and long waiting just to get it to see the network, and then the phone still doesn't work.
The sim card is fine, and it seems the problem is the same if I downgrade to 2003SE (by the way, I only seem to find T-mobile ROMs that work.. don't know where the WM2003SE ROM is I originally had on here).
The phone only seems to work sometimes if I after I soft-reset, I make the call while the BA is still on the cradle.
If anyone knows of a solution I'd really appreciate it.. on WM2003 my SX66 would only act funny if the charge fell to 60%. Now it's wacky with all the up/downgrading/charging/soft-resetting I've tried.
Thanks!
Additional info
I don't know if this is related, but I have the storage almost full of installed programs and the device is much slower now. Also, the Data Connection buttion is grayed out in HTC Comm Manager.
The phone seems to be working right now. Give it an hour and it'll probably be wacked again
Final solution for 'No service'
Hi burnblue...
Try this thread: http://forum.xda-developers.com/showthread.php?t=340557
This resolved my problem...
1) In WM2003 and install bandsel .CAB
2) Choose a band of your operator gsm/country (in Brazil, for my operator is 900/1800Mhz (Operator "Claro" and "TIM")... here in Brazil we have another operator what works in 850mHz (Operator "Vivo").
3) If you want, upgrade your rom for WM6 (much better)... your band selection will be fixed (came to wm2003). I don´t undertand about fixing a band remain after rom version upgrade... No explain about this.
No more issue about radio gsm signal, be happy....
Works perfect to me, I´m 100% certain about this procedure.
Rodrigo Pelosini
burnblue said:
I've loved my Blue Angel for 2 1/2 years thanks to xda-developers, but right now I just wanna throw it away!
I have a Cingular SX66 (PH20B1) running WM6 from Xplode (6.00.00.WWE) and the radio 1.15. After I upgraded to WM6 everything was kind of OK I thought, until I realized that sometimes calls weren't getting through to me and I was getting 'No service' too often. That's when I upgraded the radio to 1.15. I was getting the no radio error, but I found through searching that if I soft reset and keep the phone charged the radio comes back.
Here's my problem.. even when the phone gets out of 'No service' and finds the network (even showing me full signal strength) I can't make calls! Calls won't come through to me! It's pretty useless as a phone, but it seems to be usually able to send text messages if I have the network. It takes endless soft resets and long waiting just to get it to see the network, and then the phone still doesn't work.
The sim card is fine, and it seems the problem is the same if I downgrade to 2003SE (by the way, I only seem to find T-mobile ROMs that work.. don't know where the WM2003SE ROM is I originally had on here).
The phone only seems to work sometimes if I after I soft-reset, I make the call while the BA is still on the cradle.
If anyone knows of a solution I'd really appreciate it.. on WM2003 my SX66 would only act funny if the charge fell to 60%. Now it's wacky with all the up/downgrading/charging/soft-resetting I've tried.
Thanks!
Click to expand...
Click to collapse
"no service" is a issue...
Your problem about slower is another problem...
Storage full ~ slower... I had problem´s about these in anothers pda´s.
Take easy to storage your files, much components in today screen, etc...
Use sd card, this help.
Upgrade for Wm6 (xplode rom) and be happy...
WM6 by xplode is faster.
What´s your radio rom version? 1.15 ?
If < 1.15, then upgrade....
Rodrigo Pelosini
burnblue said:
I don't know if this is related, but I have the storage almost full of installed programs and the device is much slower now. Also, the Data Connection buttion is grayed out in HTC Comm Manager.
Click to expand...
Click to collapse
not yet
Thanks for the advice rod, but I still have problems.
1. I saw that thread too, and it's not that I have totally 'No service' -- I have signal but calls just won't connect. It might work one minute, but 90% of the time it just doesn't.
2. I can't find a working ROM for my SX66 to downgrade to 2003. I remember weeks ago when I was trying to fix this I think I found a T-mobile ROM, but nothing is working for my downgrade now.
Why is my phone radio so unreliable?
Strange problem...
I have some tests for you...
1) Do you enable PIN ? If yes, then disable.
2) Do you upgrade your radio rom to 1.15? No? Then apply.
3) Do you have problems with anothers gsm chip ? Your SX66 is gsm or cdma ? Possible issue in your gsm chip, maybe... Try another gsm, another operator...
4) What´s the message errors or problems with upgrade or downgrade rom ?
If your sx66 is a cdma phone, sorry, I don´t have any idea how to help you.
In this case, ignore all my questions. My experience in Blue Angel is about gsm...
Take care...
(Send a message if you resolve or not this case...)
Rodrigo
burnblue said:
Thanks for the advice rod, but I still have problems.
1. I saw that thread too, and it's not that I have totally 'No service' -- I have signal but calls just won't connect. It might work one minute, but 90% of the time it just doesn't.
2. I can't find a working ROM for my SX66 to downgrade to 2003. I remember weeks ago when I was trying to fix this I think I found a T-mobile ROM, but nothing is working for my downgrade now.
Why is my phone radio so unreliable?
Click to expand...
Click to collapse
After upgrade to WM6, every time I call or receive the call, the phone will be disconnected.
Anyone has same experience ? And still, the keyboard can freeze if I want to reply a SMS directly I must go back to main menu, open the SMS, then reply.
Same experience here..tried all ROMs but same..
I have been facing exactly the same thing, as far as the Radio at least. I have also tried all sorts of different ROMs, even Radio versions but with no difference. Basically, out of nowhere i find out that my mobile cannot be reached for like hours, although it shows normal reception, until i try to make a call...then it gives me "Operation Failed" and loses the signal...only to start working normal again.
Could this be the beggining of the End for my Hardware or just firmware guys???
Tank you all..
The same thing i have. TyTN lose the signal while the phone call.
ROM: Storm v2.10
Radio: 1.54.30.10
Try this people!!!
I have flashed my TYTN with the original ROM WM6 from HTC below(comes with Radio), and it seems all WELL.
PS: The original WM6 is not the best looking but at least i get to make and receive calls with intergrity now.
http://forum.xda-developers.com/showthread.php?t=316726
@ALEX_STAMOS
What the different between ROM from HTC and from I-mate itself ?
Thanks
ALEX_STAMOS said:
I have flashed my TYTN with the original ROM WM6 from HTC below(comes with Radio), and it seems all WELL.
PS: The original WM6 is not the best looking but at least i get to make and receive calls with intergrity now.
http://forum.xda-developers.com/showthread.php?t=316726
Click to expand...
Click to collapse
Ysut, one has HTC flash screen and one has Imate screen.... Other than that its probably just a few different 3rd party apps( in oz Imate is geared up for Telstra as they distribute Imate phones)... Still badly bloated with network crap. Cheers...