Hello everyone, so I got the T-mobile wing wich is the same as the Herald a couple of days ago, and the first thing I checked when I turned it on was the program memory and it was very disappointing at around 17MB then it went down from there I never saw the 17 again, I have a few apps installed and now my memory is around 9MB after soft reset. I am not liking this about this device especially after been spoiled with the Core 2.0n ROm on my MDA (wizard) I had more apps installed and still had over 25 MB of program memory left, as far as I know the only way to make this better is to flash it with a cooked rom, but since that is too risky at this point with not having a ship rom to go to if phone gets briked I am wondering if anyone has any thoughts or solutions for this issue.
by the way I think other then the size of the wing I like the wizard better in many ways. share your thoughts.
Hummm... Are you installing your programs in storage memory or at the memory card? With exception of programs that interfere with the today screen, like wisbar advance for example, all programs should be installed in the memory card.
I have 19MB of storage memory still available... I've installed 19 programs, and only 5 are in the storage memory
BRSG said:
Hummm... Are you installing your programs in storage memory or at the memory card? With exception of programs that interfere with the today screen, like wisbar advance for example, all programs should be installed in the memory card.
I have 19MB of storage memory still available... I've installed 19 programs, and only 5 are in the storage memory
Click to expand...
Click to collapse
I always install all programs on th mmory card I have a 2GB and I have 15 apps installed and 24.4 MB internal storage memory left so that one is ok, but I was talking about RAM memory that programs need to run not storage memory the on the right side when ou open the memory screen.
The problem is the pagepool.
All cooked rom for wizard have 4 or 8MB pagepool because that´s enough. I guess on wing it is the normal 12MB - too much.
We have to cook smaler ones and we will get back the big RAM like 30MB.
Let´s wait for official update and start cooking without the possibility of bricking.
lol
FZZF said:
I always install all programs on th mmory card I have a 2GB and I have 15 apps installed and 24.4 MB internal storage memory left so that one is ok, but I was talking about RAM memory that programs need to run not storage memory the on the right side when ou open the memory screen.
Click to expand...
Click to collapse
Weird It is a fact that more today plugins result in less program memory, and there are some programs that even not being placed in today screen need alot of memory to run. I have about 20MB of free program memory. Maybe you should try to see which programs are using that much memory to run...
low memory on wing
I am experiencing the same thing. It sad when you have no programs running except for Activesync, and you can not even power up the camera. I have a T-mobile WdG care rep looking into it. The only other program i have installed is the slingplayer. I also have notice the a sling player error message showing not enough memory.
BRSG said:
Weird It is a fact that more today plugins result in less program memory, and there are some programs that even not being placed in today screen need alot of memory to run. I have about 20MB of free program memory. Maybe you should try to see which programs are using that much memory to run...
Click to expand...
Click to collapse
You have the HTC p4350 so I am sure it's runing on different rom, I think the problem is with the T-Mobile USA Rom, it has too much crap on it I even did a soft reset right before customization to prevent the t-MO stuff to install and that gave me an extra 7MB of storage but no better on the program memory and the timobile stuff still installed. I did turn off all plug ins I even shut down all unnecessary processes with memmaid and the best I got was 13MB so I am pretty sure it's the rom and I thnk Papa is right it may have to do with the page pool and or a combination of both page pool and all the T-Mobile garbage in the rom.
cyberjr said:
I am experiencing the same thing. It sad when you have no programs running except for Activesync, and you can not even power up the camera. I have a T-mobile WdG care rep looking into it. The only other program i have installed is the slingplayer. I also have notice the a sling player error message showing not enough memory.
Click to expand...
Click to collapse
yes it is sad when a cooked rom is a million times better then a ship rom made by the biggest software company in the world as Papa said I am waiting for an updated rom to be available to go back to in case something goes wrong while flashing a cooked rom, and it is only a matter of time before we can flash custom roms question is how long, I dont know how long I can handle the frustration of using this thing I installed IGO GPS yesterday and it would not run because of lack of memory so I think I am going back to the wizard until I can flash this dumb thing and by the way I don't think the T-mobile rep will come up with a solution but if he does please share it with us.
A lot of tweaking needed
I had to use Memmaid and move dll's to storage card and moved IE cache and email attachments to storage card too. Then I killed Live Search from the startup services as well as removed all things in the startup folder except services.lnk. I have two apps on the today screen and I am booting up with 20mb's free. It took some time but this will be a temporary fix until new ROM's make it here.
Using the dumped rom from the thread in the mobile 6 forum I was able to change the pagepool to 4 as well as strip out most of t-mobile's junk. While stripping out the extras did help, i'm not convinced that changing the pagepool will help. It certainly did increase the amount of free ram (27 at start dropping and hovering at 19 after several days) however I started noticing weird issues that I hadn't noticed with a 12 mb pagepool. Things like the today screen not refreshing or the wlan not starting. I'm think some of the device drivers may need to stay resident in the pagepool for normal functionality.
Overall, I've switched back to the 12 mb pagepool and everything works perfectly. The amount of free ram does get pretty low (around 4 mb) after opening all my programs but everything will still operate normally. I suspect the number reported may be somewhat misleading (like linux and vista) where it is using your free ram for caching purposes. Again i am basing this off the fact that everything will still load and work normally with low reported free ram. This is just a very long way to say that changing pagepool may introduce a new set of problems.
dll
kevinwatson5 said:
I had to use Memmaid and move dll's to storage card and moved IE cache and email attachments to storage card too. Then I killed Live Search from the startup services as well as removed all things in the startup folder except services.lnk. I have two apps on the today screen and I am booting up with 20mb's free. It took some time but this will be a temporary fix until new ROM's make it here.
Click to expand...
Click to collapse
did u move all the dll's to the storage card on the tmobile wing?
interesting, I tried runing IGO nav and it reported an error saying it needed 6MB of memory to run I had to soft reset to get it to work, last night I installed SKTools and did some more tweeking with it and gained about 2MB of memory but not much I am wondering if the rom has some memory leaks somewhere because I can't even fin what apps are using so much memory at start up I got rid of most of them the only one I cant get rid of it the myfavs.
ericizzy1 said:
did u move all the dll's to the storage card on the tmobile wing?
Click to expand...
Click to collapse
not all dlls will move like the omap and a few system dll's but I moved almost 8 I think, depends on how many apps you have installed too. I uninstalled some of the system software like oz im and tmobile mail wizard and had all of them running off the storage card too. I am getting 20mb free upon bootup and all the things are working as far as I know.
hi
kevinwatson5 said:
not all dlls will move like the omap and a few system dll's but I moved almost 8 I think, depends on how many apps you have installed too. I uninstalled some of the system software like oz im and tmobile mail wizard and had all of them running off the storage card too. I am getting 20mb free upon bootup and all the things are working as far as I know.
Click to expand...
Click to collapse
if u could only tell me which dll's(that came installed on the wing) u moved, it will be great.
dll's
I moved everyone that Memmaid would allow me to move, the ones that were in use could not be moved and that was only a couple.
Here's what I did and I have like 15mb to spare
I did a hard reset on my Wing - then, when T-mo's customizations started/tried to run, I did a soft reset (thus preventing their installation).
From this point I installed any and everything that i wished to have on my phone
(in my case this consisted of: total Commander; Sleuth's WM6VOIP; HTC Home Plug Today Plugin; RvBCrS HTC Startup animation; A_C Slide2Unlock; Chi-Tai Dang batteryStatus TD-Plugin; T-Mobile Soft Key Applet; PPCSoft psShutXP; HTC Audio Manager; The Equinoxe Wizard Retouched Dialer2; and By Boto XDA-Developers HTC Touch Comm Manager)
As you can see, I installed a lot of stuff and still I have sufficient room left on my device. will say that inevitably you may want to reset your device about once a day or so - because it appears to slow down and lose memory over time, but all in all it's no worse than my MDA ever was, plus I still have my MDA if I missed it that much (Which I don't).
xander803 said:
Using the dumped rom from the thread in the mobile 6 forum I was able to change the pagepool to 4 as well as strip out most of t-mobile's junk. While stripping out the extras did help, i'm not convinced that changing the pagepool will help. It certainly did increase the amount of free ram (27 at start dropping and hovering at 19 after several days) however I started noticing weird issues that I hadn't noticed with a 12 mb pagepool. Things like the today screen not refreshing or the wlan not starting. I'm think some of the device drivers may need to stay resident in the pagepool for normal functionality.
Overall, I've switched back to the 12 mb pagepool and everything works perfectly. The amount of free ram does get pretty low (around 4 mb) after opening all my programs but everything will still operate normally. I suspect the number reported may be somewhat misleading (like linux and vista) where it is using your free ram for caching purposes. Again i am basing this off the fact that everything will still load and work normally with low reported free ram. This is just a very long way to say that changing pagepool may introduce a new set of problems.
Click to expand...
Click to collapse
Is it possible to use an empty extended rom to stop some of those problems???
Just want to share the info on solving the problem with the Wing mem problem.
I read and followed the instruction HERE. I have set the cache mem to 6mb. I now always have 11-15mb available and the phone is responsive. And the phone is been going strong for 2 days.
dangtong said:
Just want to share the info on solving the problem with the Wing mem problem.
I read and followed the instruction HERE. I have set the cache mem to 6mb. I now always have 11-15mb available and the phone is responsive. And the phone is been going strong for 2 days.
Click to expand...
Click to collapse
What are you running in background??????
I have 26MB free while SPB mobile shell, today agenda and batterystatus are running - and 22MB when activesync is connected!
BUT i have the terra. But even without pagepoolchanging i had 20MB free. After all programs are installed.
So what are you running?????
got 8 free and only Mobile shell, Phone Suit and Weather running
**** this device
Related
Does anyone experience the free program memory problems in XDA Mini? In my case, after a day of usage, the memory reduce to 14 mb, when doing a soft reset, the free program memory go up to 24 mb, means I need to soft reset every days?
Note: normally I use the phone, Pocket Informant (calendar, contacts) and sms only.
Instead of doing soft reset, just go into:
Settings - System - Memory - (Running Programs tab).
You'll probably find a lot of open programs there. Close them.
Seems to be a major design fault in the Windows Mobile OS. But then again this is product from Microsoft we are talking about - not exactly a shock that they would, without hesitation, release software with such a major failing.
I think what IvorNeo 2 means is that even without any active programs, the storage/program memory will become very low over time. This has happened to me as well. With only Activesync and Batmon 2 active, memory level fell to sub-500K level and phone needed a soft-reset to regain functionality. Phone was not in use at the time (charging).
There are some other threads discussing how to free up memory, but I haven't come across any fixes for this particular bug (yet).
i have the same problem
in my s100 , the memory reduce to 19 mb,after 2 or 3 days when doing a soft reset, the free program memory go up to 27 mb
mhtay
There are some other threads discussing how to free up memory, but I haven't come across any fixes for this particular bug (yet).
Click to expand...
Click to collapse
Very nice , if someone can solve this bug
Regards
For me there are are 3 reasons why memory starts to decline:
Activesync eats up about 3MB each time you sync up and though it returns some when you kill the app it does not return the entire amount
html cache files when I surf with the device - gotta empty these along with the cookies...etc
duplicate processes and notification ques that pile up when you soft-reset the device. Over time these tiny bytes add up.
There's no fix for the main culprit of the memory loss - Activesync, maybe newer versions won't be so bad.
the same problem to me, I`m nor sure if it`s beacuse of aactive sync
This happens to my girlfriend's Mini and she does not browse nor does she use Activesync. Also I installed a program to get rid of the duplicate ques. In theory then she should not lose memory but she still does. It is just how Windows works....when you use programs you never get back 100% of the memory upon closing. Soft resets are just a necessary evil with Windows.
The latest version of SKTools has an additional neat feature to free-up RAM.
sk tools very useful program
but even this one works not so good as a soft reset.
Or with 64 mb RAM you can use oxios memory
http://www.oxios.com/memory/
be sure your programm memory less than 21mb while trying to free your memory up.
I have quite a lot of programs installed, most of them in Storage and TT5.x in SD card. Most DLL's also in Storage. I set my Prog Storage memory to 6.5-7 MB and I have over 30 MB for programs after applying SKTools FreeUp RAM utility.
rustoss said:
Or with 64 mb RAM you can use oxios memory
http://www.oxios.com/memory/
be sure your programm memory less than 21mb while trying to free your memory up.
Click to expand...
Click to collapse
Isn't this a smartphone software? Will it work on wm5?
find out!
for magician good solution
@rustoss,
does this little applet close the running processes automatically once exitted?
thanx
hibernate.exe emulate filling memory till 90% & then system trying to clean possible RAM by itself i think so, i know exactly this action do the SKtools's freeupRAM, noone prog or process cannot be terminated by both.
closeapps.exe can!
a question about the topic: Rustoss do u have posted any prog here? because I'm not seeing it if it is
MocciJ
No, just put
I am not sure whether mine is right or not. but the version 1.5 sitll be same with before to O2:
128M for system STORAGE and PROGRAMS... another 15M for STORAGE. after release EXTROM, then extra 16M is up.
That is very excellent partition for me: I install everything in the MAIN, then just use different SD card for data, it works very good.
But after I upgrade to Version1.6. I suddently find:
the total 128M all for PROGRAMS. and the 15M STORAGE moves to be system STORAGE,
Then I have very limited functions: I can not install any software in the MAIN since after I installed CHN OS and INPUT, only 5MB left in the main storage...
:-(
not good!!!!! stupid concept!!!!!!!!!!!!!!!!
so what? use version 1.50h or 1.50i and be happy
YES, I AM DOWNING TO VER1.50 NOW
design is PERFECT, but unfortunately not ideal for xda2 device.
new devices are having 128MB of flash chips and 64MB of RAM chips.
the whole wm2005 on himalaya is just pure experiment...
go for 1.50i if you need more storage space.
for me it is good, coz all my progs are running off of SD card and extROM. I like, that I don't have to care about the battery...
buzz
ps. please post to the right threads...
I think that 1.60a is perfect. It uses the available Himalaya hardware to the max.
I patched the 1.60a down from 128MB ram to 96MB and installed the 32MB ramdisk. With this I have enough storage space while still having the 16MB storage and 16MB Extrom persistent.
Cheers
Pat
i think it is great
i started with 1.60a but as i do have too use wifi and lots of progs put the 96 there
as time passes i do receive a lot of emails and sms messages that wasnt enouth also so put the 64/64
i runing it with that and tell you its very good
as i agree with buzz this tecnology is for new devices and on the xda2 it still works very well
so a version with 32 mb one partition and 128 of ram if possible would be great
i would test such a config when buzz manage to make it possible
1.6a 64
hi buzz and thanks for everything
what i did install is 1.6a 128 in may imate2 (xda2) its good but having troubles with empty storage (whenever i install a program in my SD storage "0.19mb now" some of them take bite from storage and keep program untuched "still 100mb")
so can you help to change that from 1.6a to 1.6a 64mb and i will be so thankfull.
thanks
At first I find it stupid...But the purpose of this is to let the memory stay when the battery gone. You could always use the Extended Rom to become your storage or you can flash back to 150i 32mb/64mb/96mb..
Hi,
I'm using 1.60a and everything is ok!
Usually I choose if program is more or less important and install in Main or in Extended Rom.
So far no major problems.
Only Pocket Informant can't install (even they said is a WM5 compatible version).
Bye.
tony-xd_wang said:
YES, I AM DOWNING TO VER1.50 NOW
Click to expand...
Click to collapse
Me too
now downgrade to 1.50i96 faster
1.60a prog memory leak?
First of all thanks to Buzz for a splendid job on the wm5. Having 120mb for running progs has its advantages. But I'd like to post an observation. When normally running after a soft reset, my prog mem is set at 106mb. Then when running the normal progs of the day w/c uses up prog mem, closing the progs would restore it back to my initial 106mb. I've noticed that even w/out running progs, the prog mem gradually drops down. After a few hours it will be at 98-99mb w/out any running progs. I don't know if anybody has noticed this behaviour on their xda2. Perhaps some entlightenment Buzz?
Fyi. i'm running dktoday and spb pocket plus3. The mem monitor from spb tallies w/ those in /settings/memory.
Forgive me for not really being able to search deeply into this matter, I've seen threads detailing updating with the JasJar ROM or an amalgamation of the the MDA/O2 ROM.
1) I have 43.72mb total storage and 47.93mb Program storage. This results in 91.65mb total storage??? Right, at 128megs where has 40mbs gone? I have pretty much the exact same set up on the MDA3 yet the two figures more or less add up to 128mb. Can someone confirm these figures with me?
2) Is there a new ROM coming out and soon? I'm not one to complain if results are going to happen, but the memory issue is a biggy to me as there is one more program I want to install on the thing and I doubt there will be enough free memory.
3) Software, I'm sure there was a better suite of software on the MDA3 when that came out. Okay time consuming it may be but sometimes I do like to run Messenger when I'm on the train - where has it gone? And if Microsoft think I'm going to pay £10.99 more for that feature they can go swivel. I followed a thread that said it's included in Windows - it's not on the MDA Pro.
I really love the design of the thing but the software just seems to be a joke. Where do I start? I have posted the MDA3 for sale on Ebay and I want to honour that sale, but I also want a device that replaces my MDA3 100%.
This includes getting TomTom 5 to work with my BT GPS receiver!!!
1. Sorry not sure about the memory
2. I havent heard of a new T-mobile ROM being available and they never seemed to work on any updates for the MDAiii
3. The software suite was better - I miss my messenger too and like you I am reluctant to pay microsoft a tenner! The backup software isnt avialbel either which is an arse.
4. Good luck with TT5 I had to upgrade my co-pilot to get it to work on new os.
If at all possible could anyone with the MDAPro and the carrier ROM please do a memory check on theirs to compare with mine?
If you're not sure how to do it - Start/Settings/System/Memory, I just need the total figures for Storage and Program
I have the same memory CONFIG as you have stated!
In WM5 you have separate ROM & RAM configuration unlike WM2k3...
So here's how ur memory is split up -
1. RAM 64MB
Out of 64 megs of RAM, you loose roughly 17MB on internal allocation. For the device to run perfectly it has various fixed RAM permanently allocated (DMA buffers (for ur cameras etc.), kernel level memory allocation, GSM memory, video memory, mem swap space, cache etc.). This total memory fixed can vary from device to device, and each company can tweak it accordingly. Eventually, the OS has roughly 47MB for use. Now again, when WM5 powers up, it again consumes around 17megs of RAM, giving you 30-32 megs of ram to use for your programs or apps!
2. ROM 128MB (permanent storage)
This is divided into the following -
a. OS install: This is where WM5 related files etc. gets stored. This is a total of 64Megs
b. Extended ROM: This is used by maufacturers to store their customizations etc. Another 20megs allocated for this
c. User storage: This is the space available for you to install programs, and for windows to bloat Thats 43megs that you find!
Hope this clears out
Cheers,
San
Thanks for you response having had an XDA for some time and then the MDA I was just quite suprised to see a Memory low warning message so quickly as I never saw one on the MDA3. I wanted to confirm that I wasn't having memory issues.
Bigface title to a not sure method, but with hoping success for the object.
I think everybody is fighting with this nerve-racking memory bug in wm5+vga+universal thing.
Me too.
Very very hard.
I'm very angry with this statement.
I bought the newest, most professional PDA with the oldest, most amateur speed.
It is not new for anybody, I'm sure.
I've opened this topic to solve this *******, because I think ROMupgrade is coming very slow.
I tried hundreds of different things to keep my RAM's free memory and get my Jasjar/MDApro/Exec more speed.
I'd like to share my experience to you and I'd like you to share your experience to us, to understand why does it happen.
OK....so.....
1) My first and biggest remark in this theme:
gwes.exe (this is a system process, which is runnig continously with the system to let us using functions of our device)
It is runnig with the following modules: (on my device, it is not sure all on yours too, but I think almost)
lrgwesex.dll
touch.dll
commctrl.dll.0409.mui
commctrl.dll
aygshell.dll
keybddr.dll
ddi.dll
toolhelp.dll
gwes.exe.0409.mui
toolhelp.dll
ceddk.dll
coredll.dll.0409.mui
ossvcs.dll
ole32.dll
coredll.dll
So...this gwes.exe starts with the system after a soft reset taking about 6MB RAM memory.
If you are watching carefully, when your RAM is getting less this gwes.exe is getting bigger.
In one of my examples after a soft reset I had 24MB free memory, and when I had just something like 4MB I checked the running services.
And you know what???
gwes.exe was using by then 19.5MB from the memory!!!!!!!!!!!
So I think when you start an application, system files are using more memory with applications, but when you close the application you have just more with the memory using by this application but less with the memory using by the system with this application.
I'm not sure with this, but i'm sure there is a big problem with this gwes.exe service.
I found more processes (device.exe, filesys.exe, cprog.exe, shell32.exe, repllog.exe) which are doing something the same but not that much than gwes.exe.
So if somebody has some reflections about this write it down to us!
2) A lot of people say there is a hack in the registry / storage manager cache keys which we increase, system will operate with higher speed.
I'm not sure now.
I tried a lot with different keys, and my suggestion is totally the opposite than that: when I set different cache keys (glyphcache, storage cahes...) to zero the system eats less memory and something the same with the speed.
Interesting.
I don't have exact results in these points, but thinking about somewhere here the answers.
Please help us to find the solution together to solve this irritating bug!
Sorry for my english, I'm hungarian.
THX
Tuningszöcske (It is in english something like Tuning-Grasshoper)
Here are my results ...
After Reset
=======
gwes 6.49 MB
filesys 1.86 MB
shell32 1.95 MB
cprog 2.12 MB
device 1.46 MB
services 215 KB
connmgr 91 KB
After Bloating
=========
gwes 12.7 MB
filesys 2.7 MB
shell32 2.39 MB
cprog 2.12 MB
device 2.3 MB
repllog 555 KB
services 407 KB
connmgr 111 KB
GWES really does bloat up a lot over time. Did a search on the net and it appears to be graphics related ...
It's good to see other's same results.
I'm searching for the answers countinously too...
I never have a memory issue with my dopod900, even after a week of usage with various games and application, the memory still remain around 22++M. Will try to check up the result and post it here.
I also want to know why........
After the reset, my machine has around 20M left and after a while, only 11M left and that's last for quite a long time. I have no experience that the memory is only around 4M....
Cheers,
chtan said:
I never have a memory issue with my dopod900, even after a week of usage with various games and application, the memory still remain around 22++M. Will try to check up the result and post it here.
Click to expand...
Click to collapse
Are you using the stock machine without all the tweaks ? I mean have you applied optimizations like cache settings, etc ?
I'm just wondering if it might have something to do with some of the changes we made to improve performance :?
The issue is partially duie to Microsoft, but also partially due to 3rd party developers. I know for a fact that a lot of developers do not bother to have their applications issue defragment or compact instructions to the operating system after closing. They take up place and resources in the memory heap but do not "give them back" after they close.
You can blame the Universal as much as you want, but in my opinion it's one hell of a machine that had the misfortune to be the first officially released WM5 machine out there. Microsoft is indeed working on speed, stability and other issues form their end (the latest O2 Exec rom is by far the fastest and most stable ROM there is), but the developers need to do their bit as well and start working on their program's behaviour.
"If a kid does not tidy up his room, it's likely it will start losing things"
Wiz said:
The issue is partially duie to Microsoft, but also partially due to 3rd party developers. I know for a fact that a lot of developers do not bother to have their applications issue defragment or compact instructions to the operating system after closing. They take up place and resources in the memory heap but do not "give them back" after they close.
You can blame the Universal as much as you want, but in my opinion it's one hell of a machine that had the misfortune to be the first officially released WM5 machine out there. Microsoft is indeed working on speed, stability and other issues form their end (the latest O2 Exec rom is by far the fastest and most stable ROM there is), but the developers need to do their bit as well and start working on their program's behaviour.
"If a kid does not tidy up his room, it's likely it will start losing things"
Click to expand...
Click to collapse
Hmmm, you would think that Microsoft would be smart enough to put in some checks to automatically release the memory used by a an application after it closes :?
I don't blame the universal, the hardware is fine and I'm quite happy with it. I do however blame Microsoft. WM5 is just soooo slow. If I didn't do all the performance tweaks that's been discussed here, I don't think I can live with this device. You have to understand that I come from using 3 generations of Palm devices previously, and even though they are using much slower processors, they are waaay more responsive than WM5.
The last Palm I used was the Sony Clie NX70. I used it for 2 years without having to do ROM upgrades, etc. and it worked just fine. One would think that given the number of years that Microsoft had to improve WM, that they would be able to do a better job. As it is now, I'm finding all kinds of weird bugs all over.
Well, I'm just frustrated, sorry for ranting :lol:
christan said:
The last Palm I used was the Sony Clie NX70. I used it for 2 years without having to do ROM upgrades, etc. and it worked just fine. One would think that given the number of years that Microsoft had to improve WM, that they would be able to do a better job. As it is now, I'm finding all kinds of weird bugs all over.
Well, I'm just frustrated, sorry for ranting :lol:
Click to expand...
Click to collapse
I have been making the same point - M$ should know better and memory management is not bleeding egde tech. My Symbian devices have rock solid memory management, they just keep running for weeks and months without the need for a reset. For a US$1000 we should expect better quality all round. Lets hope in te next 6 months we finally get what we paid for.
jah said:
christan said:
The last Palm I used was the Sony Clie NX70. I used it for 2 years without having to do ROM upgrades, etc. and it worked just fine. One would think that given the number of years that Microsoft had to improve WM, that they would be able to do a better job. As it is now, I'm finding all kinds of weird bugs all over.
Well, I'm just frustrated, sorry for ranting :lol:
Click to expand...
Click to collapse
I have been making the same point - M$ should know better and memory management is not bleeding egde tech. My Symbian devices have rock solid memory management, they just keep running for weeks and months without the need for a reset. For a US$1000 we should expect better quality all round. Lets hope in te next 6 months we finally get what we paid for.
Click to expand...
Click to collapse
I sure hope someone here can figure out a hack to fix this soon, cause as it is now, I'm having to soft reset at least once a day, quite often more.
Can any users here who are NOT experiencing the memory leak issues come forward ? I think we would all like to know what we're doing differently that might be causing the memory leaks ...
chtan said:
I never have a memory issue with my dopod900, even after a week of usage with various games and application, the memory still remain around 22++M. Will try to check up the result and post it here.
Click to expand...
Click to collapse
Hi chtan!
Is it possible to ask you to backup your registry to a file and upload here?
Just to see what is different in your system than ours.
And which is your ROM and ExtendedROM version?
THX
Hint
Hi Guys,
The above phenomenon is due to the reason that now we all have data in the flash memory.I was using earlier Nokia Symbian phones, viz 6600,9500...in all these the same used to happen and I had to restart the device...but there are 3rd party softwares, which compress the RAM if the above thing happens and we are at the initital full RAM memory w/o restarting the device...like Stacker, Switcher etc...similarly we also have "Place Maker" for Smart Phones...to do the same...someone can try this app...or someone can make an app to do the same...I hope this gives some light to solve this problem..
Re: Hint
hdubli said:
Hi Guys,
The above phenomenon is due to the reason that now we all have data in the flash memory.I was using earlier Nokia Symbian phones, viz 6600,9500...in all these the same used to happen and I had to restart the device...but there are 3rd party softwares, which compress the RAM if the above thing happens and we are at the initital full RAM memory w/o restarting the device...like Stacker, Switcher etc...similarly we also have "Place Maker" for Smart Phones...to do the same...someone can try this app...or someone can make an app to do the same...I hope this gives some light to solve this problem..
Click to expand...
Click to collapse
Yes, you are right.
This is a secondary option to solve this problem.
But I don't know any application for pocket pc which does RAM-compression.
Do you know one?
Re: Hint
Tuningszocske said:
hdubli said:
Hi Guys,
The above phenomenon is due to the reason that now we all have data in the flash memory.I was using earlier Nokia Symbian phones, viz 6600,9500...in all these the same used to happen and I had to restart the device...but there are 3rd party softwares, which compress the RAM if the above thing happens and we are at the initital full RAM memory w/o restarting the device...like Stacker, Switcher etc...similarly we also have "Place Maker" for Smart Phones...to do the same...someone can try this app...or someone can make an app to do the same...I hope this gives some light to solve this problem..
Click to expand...
Click to collapse
Yes, you are right.
This is a secondary option to solve this problem.
But I don't know any application for pocket pc which does RAM-compression.
Do you know one?
Click to expand...
Click to collapse
By RAM compression, do you mean an active app that runs in the background to automatically compress stuff in RAM then decompress stuff in the RAM on-the-fly when used ?
If it is what I think it is, I don't think RAM compression is the way to go unless there is absolutely no other solution, cause compression-decompression will have a significant performance impact.
I think it's more important to get to the root of the problem
NO.
There are many applications for PC which make the RAM free from unused services, applications, files...
Using this method, you don't need to restart your machine.
It worth it for me to push a button or a shortcut to free the memory without a softreset.
Tuningszocske said:
NO.
There are many applications for PC which make the RAM free from unused services, applications, files...
Using this method, you don't need to restart your machine.
It worth it for me to push a button or a shortcut to free the memory without a softreset.
Click to expand...
Click to collapse
Opps, I misunderstood the use of the term "Compression" there ...
Yes, if someone can come up with an app that can "clean" up the RAM, that would be good too
Wiz said:
The issue is partially duie to Microsoft, but also partially due to 3rd party developers. I know for a fact that a lot of developers do not bother to have their applications issue defragment or compact instructions to the operating system after closing. They take up place and resources in the memory heap but do not "give them back" after they close.
You can blame the Universal as much as you want, but in my opinion it's one hell of a machine that had the misfortune to be the first officially released WM5 machine out there. Microsoft is indeed working on speed, stability and other issues form their end (the latest O2 Exec rom is by far the fastest and most stable ROM there is), but the developers need to do their bit as well and start working on their program's behaviour.
"If a kid does not tidy up his room, it's likely it will start losing things"
Click to expand...
Click to collapse
No hack or tweak applied, everything in stock condition. This confirmed my suspicious that Exec and I-mate only having this problem and this is due to their highly customized rom set.
That is strange.. I also have Dopod 900 and suffer from the same problem of memory leaks. The first time I got my Dopod 900 with factory default settings and applications, I played with it for 2 days and noticed that the memory went down to 15++ M.
So I would assume that without any 3rd party applications installed, memory leaks problem is there..
Chtan!
Then you could be a magician, because - i think - we all use the ROM with factory settings after a hard reset, and then - same as you -, when we install a lot of different applications and games, we have the memory leak.
So, what about this registry backup for us?
Or can you write it here the apps and games you use?
I have not performed a soft reset for 5 days. I am performing a test on how long my EXEC can last without having to perform a soft reset. I use mine regularly everyday, about an hour on phone calls, 2 hours on browsing using PIE, the usual opening and closing of applications, and I leave it at night charging while playing a DVD on a continuous loop for non-stop movie playback. I do admit the only time I notice slow downs (4 seconds to open an application) is if I leave about 10 open applications at the same time running in the background. That is why I make sure I close all open applications after use using Handy Menu's option to close all. As of now here is my memory allocations:
Storage
Total: 43.72 MB
In use: 14.52 MB
Free: 29.19 MB
Program
Total: 49.93 MB
In use: 30.94 MB
Free : 18.99 MB (with active sync open and running attached to my computer) If I unplugged my EXEC and close active sync, it goes back to 20.19 MB
These are all my open applications and memory usage without any slow downs:
gwes.exe: 7.48 MB
filesys.exe: 2.72 MB
device.exe: 2.43 MB
cprog.exe: 2.33 MB
shell32.exe: 1.43 MB
repllog.exe: 499.69 KB
services.exe: 227.76 KB
tmail.exe: 163.62 KB
connmgr.exe: 131.81 KB
HandyMenu.exe: 123.81 KB
rapiclnt: 115.90 KB
poutlook.exe: 47.90 KB
SDDaemon.exe: 47.90 KB
MemMaid.exe: 23.90 KB
shfind.exe: 19.90 KB
srvtrust.exe: 7.90 KB
NK.EXE: 0 Bytes
Even with these applications open. My EXEC runs fine with no slow downs.
I am happy with my EXEC. Even after 12 hours of continuous Movie playback at night, I don't feel my EXEC over heating. This thing is amazing!
I'm new to the Diamond and WM in general (having converted from Palm OS) and am trying to learn my memory useage and how it affects my device's performance.
Right now....
Storage: Total 102.6b/ In Use 86.99/ Free 15.69
Program: Total 203.84/ In Use 61.05/ Free 142.79
I have installed Sprint Theme via TF3D Config as well as a couple asthetic Cab files. All of my installed apps have gone onto Internal Storage.
So I guess my question is: How do those num,bers look? Will these slow down my device? Is there anyway of getting the FREE numbers higher??
Thanks
Lee
just install what u need and uninstall what u dont
f in el ! i only have 64 meg free program memory on mine! and thats after a hard reset
u guys should try a program called MemMaid, changing different cache sizes within this program helps boost performance and memory depending on the amount of files and programs u stored on ur PPC not ur internal memory
its working great 4 me i have installed 10 different programs and i still hav 45% of ram available, loving my diamond atm
shahinshahid said:
u guys should try a program called MemMaid, changing different cache sizes within this program helps boost performance and memory depending on the amount of files and programs u stored on ur PPC not ur internal memory
its working great 4 me i have installed 10 different programs and i still hav 45% of ram available, loving my diamond atm
Click to expand...
Click to collapse
Link??? ^^^^
I feel memory is a big flaw to this phone, and ive tried many things to counter the device storage filling up, to no avail. after i hard reset the device (which ive done some times now) i got like 65 megs. i install a theme and it bumps down like 20 megs. thats ok!
BUT
when i install my other apps, to storage card ofcourse, it still fills up my device, so in no time after hard reset, i`m lucky to stay over 10 megs. frustrating to say the least. what use is a ppc with 4 gigs of internal memory if it works like this?
i want a new phone allready, i kinda like the touch HD, but im afraid it will do the same thing to storage.
My VOX did not have this problem (sigh).