I am having problems with using a calling card feature on 700wx. I have tried all possible calling card and prepend programs and here is the problem:
My phone dials the calling card #. After that waits for few seconds and than dials the phone # (I have disabled the pin dialing from my number). Problem is that it dials the number SO FAST that the Calling C. service says "you have dialed an invalid number"
How can I slow down the actual speed sequence of auto-dialing or something like that. Is there a hack.
My previous phone ppc-6700 didn't have this problem with same software and cc service.
Please help.
V
Anybody? Please.
you could probably enter a comma for a pause to slow down the speed.
Related
I bought VC 1.6 to use with a Cingular 8525. I was prepared to cope with the BT headset issue, but ran into another problem.
When I try a voice dial using a contact entry, the program finds the contact and specific number without any problem. However, it does not dial the number. I have to press the Enter part of the D ring, The contact closes after a few seconds if I don't.
The phone dials fine if I speak a phone number instead of a contact entry.
Has anybody else seen this problem. Any ideas?
Thanks.
It should repeat what you said to confirm that this is the number you want to dial. Say "Yes", and it should dial for you.
donb said:
I bought VC 1.6 to use with a Cingular 8525. I was prepared to cope with the BT headset issue, but ran into another problem.
When I try a voice dial using a contact entry, the program finds the contact and specific number without any problem. However, it does not dial the number. I have to press the Enter part of the D ring, The contact closes after a few seconds if I don't.
The phone dials fine if I speak a phone number instead of a contact entry.
Has anybody else seen this problem. Any ideas?
Thanks.
Click to expand...
Click to collapse
If you are unable to resolve this problem, try uninstalling and reinstalling.
Make sure that when you reboot after installing that you don't pull the battery to do it. The registry may not be flushed to the NAND if you take this approach and it may result in an incorrect installation.
A second unin-reinstall did the trick.
Thanks.
I have succefully configured VOIP on my HTC cruise but cannot dial out. it seems that the problems is the phone number format. if i dial for example 555789456 when i press send the phone will automatically reformat the number to (555) 789-456 and i think that the problem comes from the ( ) and the dash - .
does anyone know how can i disable the phone number reformatting ?
well I live in Egypt and my operator is Mobinil.
Mobinil's customer service number is 110, in winmo it worked just fine (and from aaany other device in Egypt obviously), but in android when i dial 110 it recognizes it as an emergency number
is there any solution? this is a really annoying bug
any help guys...?
Probably since almost every (if not every) emergency number only has 3 digits (eg. 911, 112).
Your operator probably pre installed the 110 number to be redirected to their customer number (which is a normal phone number I guess). And probably in android it doesn't auto redirect to this number.
Workaround would be to save their normal customer number to your sim and dial that one instead.
I have upgraded to kk 4.4.4, Since I upgrade I have problem to select options using dial pad. From contacts or using dial entering nos in dial pad I can make calls but like when I need to call customer support I can dial there no and connects but when computer gives options like press 1 for voice mail 2 to someone at that time when press nos at dial pad does nothing. I can hear key tone pressed but doesn't select in their options. I can't even listen my voice mail. when dial voice mail it connection and when gives options keypad press high lights and key tone sounds but no selection. i have tried changing one hand options and installing other dialing apps like exdialer, rocket dialer nothing working. When used 3rd party dialer just dial pad changes and when at options selection it shows again stock dial pad. And one more thing when I'm talking on phone and if I get second call phone disconnects.
I'm using LYCA Mobile USA with verizon N900V If I use same sim with other phone everything works fine, So I know this is only problem with phone set.
Just I'm having this issue or some one also having this problem. Some has solution please help. Thanks
I Have the Same issue
I purchased the phone from Verizon and i'm using cricket now, i can't access any dial pad option when i dial voicemail or any 1 - 800....... number like for customer care press 0 i press the 0
but the response still say for customer service press zero, i sent the phone to Samsung with my factory warranty but Samsung seems doesn't really care they send me back the phone with no problem fix, and besides that i used to have a dial issue if i call some on from my call log it adds 01117730000000 some like this it seems like the phone is dialing International for local calls but i got fixed that problem. but i need help for the $700.00 phone i paid it's a piece of crap Samsung doesn't really care i would't never purchase a Samsung phone if there warranty services doesn't do noting.
I bought my US996 V20 from B&B and got it shipped to the UK where I live. It works fine in the UK except for one anomaly.
I have my service provider's voicemail number 901 set up as the voicemail number in the phone settings. But if I attempt to ring 901, either by holding down the 1 key OR by simply dialling 901, my phone attempts to ring +17855366... I.e. it dials my UK mobile number but with the American prefix. I then inevitably get the "number not recognised" message.
This is evidently some consequence of the phone being intended for sale and use in North America. But I can't work out why it is doing this or how to stop it. Meanwhile I can't access my voicemail when the phone is set up properly.
To get round this, I put any random incorrect number in the phone's voicemail setting then I can manually dial 901 without the phone hijacking it and redirecting my call to +1..... So it's a minor annoyance at best, but it's intrigued me so if anybody knows why it's doing this, and how to stop it, I'd be very grateful.
All the best
Doug