Database Users

No sound without headphones after fall!!

Hi all
It would be great if you shed some light on the problem
Xda exec had a fall!..since then no sounds at all, phone won't ring or won't play music...but has sound if i plugged the headphones in
Any theories/ideas what might have gone wrong...& possible solutions..
any help would be appreciated...thanxs

sound failed on xda exec
i also had the same issue but my handset was replaced as it was within 28 days of getting the handset
i never did manage to find the exact issue
when your handset fell did it have external sound / handsfree plugged in at the time
about the only thing that made any sense with mine was the possibilty of the micro switch / contacts of the externl audio jack being damaged
dont know if any of this info helps you at all but best of luck getting it sorted

Still no explanation for the no sound problem Xda Exec
Does anybody find out allready what's the problem with no sound on the Xda Exec.
I not speak about the problem with the external audio jack.
I can make cals like normal, I only can not play music or listen if somenone is calling me.
Thanks

its hardware problem with universals audiojack .. just open device ..remove board . plug headphones ... and see on connector /.... in most cases no sound issue cames from third pin of jack (thst pin detect plugged headpnones .. if it disconnected device plays in headphones if connected device plays on builtin speakers) if near end of it ...
a may advice you more deeply but i didnot have proper photo to explan in his basis..
just give me HI RES PHOTO OF BOTH SIDES OF YOUR MOTHERBOARD.. i explain what to do

mo3ulla said:
its hardware problem with universals audiojack .. just open device ..remove board . plug headphones ... and see on connector /.... in most cases no sound issue cames from third pin of jack (thst pin detect plugged headpnones .. if it disconnected device plays in headphones if connected device plays on builtin speakers) if near end of it ...
a may advice you more deeply but i didnot have proper photo to explan in his basis..
just give me HI RES PHOTO OF BOTH SIDES OF YOUR MOTHERBOARD.. i explain what to do
Click to expand...
Click to collapse
Thanks for your post.
You are shure that this willbe the problem, because I can make calls without the headphone. I was thinking that in the case that the connector gives the problem, I should also not be able to make any calls without using the headphone.
Anyway I was going to open my friend one day, to look what's up.

problem may be repaired in home in 10mins
you need
hands
brain
tools to open
1 needle
do photo .. i say what next

mo3ulla said:
problem may be repaired in home in 10mins
you need
hands
brain
tools to open
1 needle
do photo .. i say what next
Click to expand...
Click to collapse
Ok, here we go.
We have hands, tools ( a hammer ) and 1 needle.
I think I forgot something, but...
I think the problem, when the problem is hardware,
is that when you put the headphone jack, the top of the jack he opens the microswitch what you see at first.
Ofcourse when this switch he stays also open when you take out the jack, than you have a problem.
And yes with a needle you can first open the contakt and than you can dress littlebit the position of the contakt.
I have only 1 problem on my tel, this switch is closed as well, when I take out the jack. The problem is not this switch.

here we go

Correct, I am shure that this is almost always the problem.
In fact the switch is closed in normal position, and he goes open when you put the headphones.
When he not close as well automatic than, you have a problem.
But in my case it is really not this switch, so I am still looking for the reason why I not have sound.

hi all
i have same probelem like you
my friend using my device for weeks and when she give it back to me i have no sound from my device & even from headset i call the i-mate center the girl told me maybe your jack is dameged but when i sent it to suport center they told me your flex cable is dameged by wrong rotating your device and we haven't that yet ....
they sent it back to me and after some day my screen shows nothing then i buoght a cable from ebay an change , now i have voice sound screen
&....
like before
i hope these usefull for you

This was exactly my issue, under that pinkbox you marked is the tiny tab that makes or breaks contact with the internal speaker. Because my headphones break the contact, this tab after much use was stuck in the open position even after the headphones were removed. When I did the procedure you mentioned magically, sound..wow. I am extremely greatful for your troubleshooting skill.
Thanks a million mo3ulla.
If only i had this fix 2 phones ago..hahhahah.

lambrechts said:
Correct, I am shure that this is almost always the problem.
In fact the switch is closed in normal position, and he goes open when you put the headphones.
When he not close as well automatic than, you have a problem.
But in my case it is really not this switch, so I am still looking for the reason why I not have sound.
Click to expand...
Click to collapse
Hi lambrechts,
Did you manage to find out the reason?
i have the same problem, my device fell, but i didn't notice the problem until next day (i didn't use it) so i'm not sure if it is because of the drop.
I will open my device and check the Jack pins, but i want to know if you got any fix for this.

mo3ulla said:
here we go
Click to expand...
Click to collapse
hey mo3ulla, did your method work after repeated use of the headphone port? did it get stuck again any time after you fixed it?
just asking cause i have this problem on my 9000 and haven't opened it yet so i don't want to open and close it repeatedly
thankss

I have this problem aswell. But I inserted a fork and twisted it around a little and now it works as it should again.

Bumping this thread. Should be a sticky or in the wiki.
Anyways,
I tried the pin trick back when I posted here, it worked but it wasn't permanent. Instead I put a crumpled piece of post-it note above the pink dot in the picture and it worked, up until recently. Does anybody have a method to bend the connecter back down? I'm probably not using the needle right, I press the pink spot, but it pops back up.
Ideas?

twisting the pin really helps. thanks for the solution. I tried to insert my headphone again and the pin always stucked. I'm trying to find a permanent solution for this. Maybe put something to push the pin to be connected everytime I remove the headphone...

I hope this helps. I found it very useful to my Dopod 900. I tried to connect my headphones (sounds works on my headphone) then I disconnect it and sounds works on my stereo/speakers.
*Please do it carefully in pushing the pin upward from inside the hole. Just push it a little bit just enough to touch the upper pin..
additional tip: after you fixed your device, try to install SRS Wow for great audio experience

Quick Fix
I found that if you apply a little pressure between the base and just above the send key this seems to work, I tried this tonight and will report back if goes again.

luckyearl said:
Hi all
It would be great if you shed some light on the problem
Xda exec had a fall!..since then no sounds at all, phone won't ring or won't play music...but has sound if i plugged the headphones in
Any theories/ideas what might have gone wrong...& possible solutions..
any help would be appreciated...thanxs
Click to expand...
Click to collapse
could be a damaged PCB motherboard, or lose connetion for the sound chip!
you could try fixnig it, or replacing the motherboard.
a new motherboard could be bought off E-Bay US for a cheapish price =]

genspeed said:
I hope this helps. I found it very useful to my Dopod 900. I tried to connect my headphones (sounds works on my headphone) then I disconnect it and sounds works on my stereo/speakers.
*Please do it carefully in pushing the pin upward from inside the hole. Just push it a little bit just enough to touch the upper pin..
additional tip: after you fixed your device, try to install SRS Wow for great audio experience
Click to expand...
Click to collapse
Not sure if the srs wow will work, last time i tried it give lots of other problems like; mute the sounds, works great after you press the power button on and off, then no GPRS and Internet conectivity but if you have worked around those probs pls give an idea?

HTC3600 has stopped to make any sounds..

Hello,
i have a problem with my device: it has stopped to make sounds (as the click on selections, the music from a mp3, the ring of a call) i can hear the voice of the speaker in a phone call. But i can listen to everything if i put the headset on. It seems like the device is switched in "headset mode" turning off the main speaker. When i plug and unplug the headset i can hear (sometimes) the sound to come back, just to shut off the second later.
I've tried soft and hard reset and i've even installed the news rom: once installed it seems to work properly.. but this morning is "mute" again..
anyone would help this poor guy?
thanks in advance!

Execus me for this question, but I have to exclude the obvious. Did you try raising the volume utilizing the speaker icon on the top bar?

The volume is at the max and all the sounds are enabled.

MaxDemian said:
The volume is at the max and all the sounds are enabled.
Click to expand...
Click to collapse
Are you using any siftware which might conflict with the OS?
Test the volume with no software installed and BOTH sliders at the maximum (UP)position,also bear in mind that the installed windows media player has a volume slider of its own.

Sadly not: the problem is still there even after an hardware reset, without any other software installed. And if i plug the headset i can hear everything, so the volume is up.
It seems like the device is finding the headset even if they are not plugged, thus turning the main speaker off.

...maybe a broken loudspeaker...
I'm afraid to say this , but before to have my trinity I experienced a similar problem with my old JAMin , were the loudspeaker suddenly stopped working and only with a new one ( loudspeaker) I recovered the correct " voice" of the device.
in this case it seems to be the same , but to be sure you should be able to mesure the impedance of it ; normally should be around 30 ohms ...
when mine was broken , it was completely "open" ....
but to do this you have to open the device !!!!
I'm sorry , any other idea...

MaxDemian said:
Sadly not: the problem is still there even after an hardware reset, without any other software installed. And if i plug the headset i can hear everything, so the volume is up.
It seems like the device is finding the headset even if they are not plugged, thus turning the main speaker off.
Click to expand...
Click to collapse
From what you say i think we can safely rule out the loudspeaker being damaged(you wouldn't have been able to hear anything ,not even for a second), it's more than likely that your problem has to do with the miniusb audiojack which might be shorting out,the only thing you can do before taking the device to a service center is insert a miniusb cable in the jack and carefully move it sideways and up and down,this might resolve the issue.

sammis said:
From what you say i think we can safely rule out the loudspeaker being damaged(you wouldn't have been able to hear anything ,not even for a second), it's more than likely that your problem has to do with the miniusb audiojack which might be shorting out,the only thing you can do before taking the device to a service center is insert a miniusb cable in the jack and carefully move it sideways and up and down,this might resolve the issue.
Click to expand...
Click to collapse
And... sucking the jack... although this might gives a too strong picture of how much you love your trinity

Thanks a lot,
moving the jack seems to solve the issue sometimes..
I was wondering: are there any settings on the registry to avoid the use of the headset: maybe if i can set the device to never use the headset the problem with the switch could be bypassed...

lost sound
well my trinity just did the same thing.
Was working fine one minute, then suddenly no sound. Plug in the headset and it works fine, but without the headset I can connect to a call but i can not hear the other person and strangely they cannot hear me. Seems like my phone is stuck in headset mode somehow.
Haven't done a hardrest yet, but i guess thats next . . .

speaker problem, my phone thinks the earphones are connected when they arent

my speaker works when my phone rings, thats it, i cant hear anything when i answer the phone or if i play audio / video. i can hear everything if i plugin my earphones, obviously through my earphones.
so it means that my speakers are working however the phone thinks for some reason the the speaker phone is always connected when it isint. thats the only explaination i can think of as to why i cant hear anything from my phone speakers.
its not in warranty as i baught it from a different country so i am hoping i can fix it myself,
there has to be something i can do to get it to work, i am not afraid to open up the phone, is the socket where u plugin the earphone easy to replace? would someone have an internal architecture of the phone specially how the earphone socket is connected. would like to get all the information before i open it up
cheers

This can be a physical problem. Try to blow the dust out of your headset jack. Helped for me...

I got the same problem, i tried to blow the dust out of my headset jack, but it doesnt solve the problem.
I also tried to plug and unplug the Headset and i tried to clean the jack.
I will try to disassemble the phone and solve the problem.
But first i have to get these small torx.....
I think there is a small switch wich hangs in the wrong position, maybe its possible to override the switch status per software?

Jukpaul said:
I think there is a small switch wich hangs in the wrong position, maybe its possible to override the switch status per software?
Click to expand...
Click to collapse
Impossible via software I think; there's a registry setting to change to "headset" and vice versa, but it doesn't seem to do anything; the physical switch seems to override it.
Easiest way to fix is to keep trying to blow the switch back into place, or to carefully use a small cocktail stick or needle to reset the switch inside the jack. If this doesn't work,
GUESS WHAT? its stuck in handsfree mode again...and oh yah, my 1 yr warranty was over the week they returned it to me from the 3 long months. Sooo i decided to open it myself...
1- open your prophet (it will void the warranty... and if you dont know how, then go on here http://www.modaco.com/content/HTC-Prophet-Prophet-MoDaCo-com/240109/Changing-you-prophet-case/)
2- look at the jack, you will see it covered, its actually covered by a lil plastic cover that you can pop off with a small screw driver, when you do that, you'll see all the steel parts..etc
3- plug in your earphones, you will see what get pushed back as the jack goes thru.
NOW, on the right side, there is a connector that when you unplug you earphones, it will STILL BE TOUCHING the other metal connector, you'll have to bend that a bit away from it. and there u go, you're done. put everythign back together and have fun.
NOTE: the steel they use in the prophet doesnt have solid properties, rather it will reform easily, So even if you fix it, when you plug your headphones back in it WILL screw up again, so since then i avtn used mine..and you dont have to, get bluetooth headphones or something.
Click to expand...
Click to collapse
More here

That´s really helpful, thank you very much!

Plz help o2 atom problem

signal not so strong (sometimes cant get signal), camera and comm button not functioning when phone is on but still functioning when need to get into bootloader, no stereo sound no ear speaker sound.. but when open radio put on loudspeaker, can hear sound... thia PDA is like short circuit or something... coz still can hear sound when use radio loudspeaker and radio can turn on without using earphone...suspect audio jack faulty (as many these kind of problem on atom come frm audio jack) so the audio jack already taken out... but still same... but still can use as normal PDA such as wifi, got powerpoint, excel, word, CORE player and many apps come with this titanium ROM....plz help can anyone tell me about the problem..thanks

firstly i ws thinking that your inner h/w of the camera or comm button is not n contact with the outer button for the respective. but since you have told that they are working properly in boot loader, so it is not the problem of contact.
Try one thing. Goto Start-> settings-> Buttons (in WM6.1). check if you have camera asigned with respect to the camera button. Check similar for the others also

[Q] Headphone jack disable?

Hello,
I have a Problem with my Xperia X1.
The headphone jack is broken and the device will always return to the headset mode.
So I can not hear anyone during a conversation.
I would like to disable the headphone jack completely. Is there a program for that?

Are you sure it is broken?
Does it still deliver sound to a connected headphone?
Usually the detection of an inserted headphone plug is done via dis-connecting a contact in the socket where the plug is inserted (it re-connects when you pull out the plug). The same dis-connection will also happen if some dirt has accumulated at the place where this contact is, so it stays permanently dis-connected.
Over time dirt creeps into all holes of the devices and depending on your usage and storage style that may have happened now. Try to get that cleaned - maybe it helps.
I have however also seen devices where the connector of the socket to the PBA is simply ripped-off - no way to get that fixed afaik.
Luckily one of the wizards here (ultrashot) also has an X1 (as I remember) and he did a lot of true SW hacking to it, maybe he knows a way to intercept the driver or has a hint which driver to de-activate. Mind that he is very busy with really important stuff - so a simple hint may be the only thing you may get.

@ John Carter I have had the same problem for months now, at first it took a couple of mins for the headset icon to disappear after unplugged then it turned to hours and now days if I'm even lucky . I just found this today: HKLM/System/State/Hardware/Headset 0 .This disables the headset but for me it still does not play sound out the loud speaker like I hoped, in locksreen( I use S2u2) mode the headset icon is gone but when in the main interface the icon is still sitting on taskbar or topbar. It really sucks to have to use a mic headset connector to call and answer voice calls. I'm still searching for answer hopefully somethings comes up. Edit: It's a hardware problem not software.

First of all thank you for your answers.
@ tobbbie
The headphone jack is really broken = (
I've already tried to clean it but that dosent helped.
Thank you for your tip. I'm going to ask ultrashot maybe he can help me there.
@ Viper89
Are you sure it's not a software problem with you device?
For the headphone jack is not so important. I would unsolder him. But I do not know if that would still work.

I had also tried to play with the \status key in the registry with the same (non-) effects. I guess you have to intercept/kill the signal from the HW/driver that steers the other parts into what they do. Not sure where the HW signal enters the SW stack and if that could easily be altered (e.g. by dropping a device-driver). You could play with the HKLM\System\Drivers\builtin branch and then go for headset or alike. You may end up with a non-booting device, so take care to back up in case a hard-reset is needed.
If you are willing to play with soldering (and have some skills), try to solder the contacts of the socket new to the PBA. My guess is that the contacts have either come loose on top of the copper part of the PBA (then you can re-solder) or they have been ripped of the PBA including the copper. You then have to guess where the copper-lines went and re-solder. Worst you can un-solder all parts, but this is not easy to do without decent tools. You may bake the PBA around the socket and ruin the device fully in the end.

John_Carter said:
First of all thank you for your answers.
@ tobbbie
The headphone jack is really broken = (
I've already tried to clean it but that dosent helped.
Thank you for your tip. I'm going to ask ultrashot maybe he can help me there.
@ Viper89
Are you sure it's not a software problem with you device?
For the headphone jack is not so important. I would unsolder him. But I do not know if that would still work.
Click to expand...
Click to collapse
No it's definitively a hardware problem. I have actually stopped using my phone for music now and instead my mp3 player. I haven't seen the headset icon for 3 days now so maybe I'm in the clear. I think every time I kept plugging in my headphones to listen to music it kept re-aggravating the headset jack so I figured if I stopped using it completely maybe it will stop messing up and so far it has worked .