I can't locate a usb bob to test ultra-tiny pins on mini? usb so it's hard to triage this issue.
I bought sync/charge and charge cables from BoxWave...they work perfectly and allow me to charge my 8525, S9, 820 and Holux GPS from a battery pack, wall xformer, car charger usb, etc.
I then bought charge cables from JAVOedge.com and they don't work...they do charge my friend's 8525 though.
The JAVOedge cable won't charge my 8525 but will charge my Holux GPS.
Both charging cables are 2-wire and charge/sync cable appears to be 3-wire.
Although JAVOedge doesn't charge my 8525 when it is powered up...noticing another forum thread I powered 8525 down and now it DOES seem to be charging...at least orange light is on.
I recently bought Targus ultra-slim hub, VEC414S and Tumi Universal Slim PS....yet can't get a lockdown on exact usb charge-only cable reqts.
Why can I connect ANY device via USB directly to computer and it always charges with vanilla usb....yet same usb connected to powered standalone usb hub or charger/battery no workee. Is this due to 1A from computer usb and only 500ma from hub?
Any ideas? I'm confused without approp. BOB to check pins with multimeter.
Found link...
I found this in Hermes-Accessories forums:
http://forum.xda-developers.com/showthread.php?t=277742
Still going thru 14+ pages...
So this may be a silly question, but I've just received the T-Mobile MDA (HTC Wizard) second-hand and without a charger.
The Mini USB port on the bottom allows ActiveSync and charging from my notebook's USB port, but when I try to charge using an AC-to-USB adapter it doesn't work... I've tried two different Motorola phone chargers and a generic one that came with my Jawbone that has a USB female connector on the adapter and you supply your own USB cable. I've used the same cable I was using when attaching to the PC, but no luck.
Interestingly enough, I did get it to charge with the same USB cable once at an airport by plugging it into the Southwest Airlines chairs with the USB power plugs...
So does anyone know? Does this phone require a special sort of charger?
you need a charger that is rated 1.0Amps.
usb is normally 500mAmps, not enough to charge your phone.
I can't seem to find a usb to "whatever it is" wire selling..
is it a standard micro USB port?
leobox1 said:
I can't seem to find a usb to "whatever it is" wire selling..
is it a standard micro USB port?
Click to expand...
Click to collapse
yes... u r rite... itz a MICRO USB...
But it can't supply power to a USB device, so it can't be used like a PC USB port. It's only good for recharging and syncing.
so if i want to buy an additional wire, i look for a USB to MICRO USB wire right? no need to buy from HTC right?
cause i saw one usb that is smaller but it doesn't fit.. is there a MINI USB port too?
am confused
Stephen Selby said:
But it can't supply power to a USB device, so it can't be used like a PC USB port. It's only good for recharging and syncing.
Click to expand...
Click to collapse
Erm yes it can,
Actually better take the device with you. Sellers here told me there is like 7 different very similar connectors. However this one should be the standard micro USB, which is supposed to be universal charger/sync cable in the future (at least in EU).
And yes, of course, there is mini USB. And there even are more versions of mini USB, for example HTC used their own.
You had better use HTC cables. HD2 is microusb, but not all microusb cables are good for HD2. Like iPhone, it takes a large charging current, and many no brand cables cannot do it. I've got a third party cable that syncs only, but if charged from the PC, the HD2 will say that the charging current is too small. Battery actually drops when I connect HD2 to PC using this cable (because my options set it that backlight is always on when HD2 is connected). Other combinations are OK:
original cable + AC plug: charging OK
original cable + PC: charging OK
third party cable + AC plug: charging OK
third party cable + PC: "insufficient charging current"
Be careful with cables- you'd be better to buy the genuine HTC version.
Many USB/MicroUSB cables are for charging only, and don't have the data pins connected. Thats OK if you just want to charge it while you are away from your main PC or power supply.
You can also buy a miniUSB/MicroUSB adapter for charging using and older miniSUB charger, but again these don't have the data pins connected.
I bought a number of 3rd party USB to microUSB cables a month ago for sync and charging (office, PC, bedside charging), so far so good... no issues (maybe I'm lucky). The OmniaII uses the same connector, so I'm using the HTC car charger to charge both.
I bought Nokia's cable (for E71,N97,etc.) and it work just fine with charging from laptop. much cheaper than HTC in here.
if you are going for the cheapo option...
http://shop.ebay.co.uk/?_from=R40&_trksid=m38&_nkw=MICRO+USB+SYNC%26+CHARGE+CABLE+for+HTC+HD2+HD+2+Leo+T8585
i got a couple from ebay - arrived the next day. - charge/sync fine.
charger from iPhone
The iPhone charger coud be used for charging HD2. Just plug the microUSB cord instead of iPhones and ... voila. The same outputs
N86-8megapixel cable doesnt work..
So I managed to leave my HTC cable at work (2 days after getting the Telstra HD2 in OZ) and now I am on 4-5 days leave from work and really want to tinker with my phone. I think I may end up having to go back to work to collect the HTC cable - as below... challenge to get non-HTC cable to work.
I found that my wife's N86-8megapixel nokia has a similar micro-usb cable.
When connected to the PC the phone starts charging and the PC does the "doo-doop" sound a "appears" to connect to the phone, but active sync cannot detect the phone \ sync.
I see others have had success with nokia cables - I am wondering if there is something wierd going on.
Probably a daft question!
Is there any reason I cannot use a "stock" non HTC usb cable for syncing / charging. Is the HTC cable any different to any others e.g. Nokia?
Surely one cable is the same as another!?!
You can use ANY USB/microUSB Data/Charge Cable ;-)
I also do so :-D
no, charging doesn't really works, not for most cables. Unless it is explicitly marked for HD2 or iPhone. It seems they follow a new specifications. Older cables do not carry as much current. With connected to PC via a third party cable, my HD2 pops up a screen saying that the charging current is insufficient.
You can use any USB 2.0 A Male to Micro 5pin Male. Basically the typical USB to micro USB cable. I'm using a Blackberry micro usb cable (plugged into laptop) to charge my HD2 at work.
Usually sells for $2-3, or less, for 1-2 feet cable. Overpriced if you pay more. I bought the BB cable from Amazon, though I usually buy cables from monoprice.com.
i have a cable that comes with the car charger that charges the device when connected to the pc but cannot be used to sync files. when connected through this cable, the pc does not recognize it at all as an external device as it recognizes a dvd, cd, etc. in its driver.
I'm using a Blackberry cable in the office and works like a charm; I have the original at Home.
Just got my A500. It has a lot of cool ports, including the proprietary charging plug. On other devices it is possible to use the micro USB cable to connect to the PC and to charge the device via a wall charger.
So my question is this. Can I use a micro-usb charger to charge my A500 via the micro-usb slot?
Not on the A500. Takes too much juice to charge the big batteries. You have to charge through the plug .
Astrp