Related
hello all,
i'm a newscommer on this forum,i've trust in upgrade my phone with aku3
i correctly followed the topic , install step 1 (forG3) and step 2
my device worked fine after the first install (qteck 2.15 fr ->2.2 from step1)
i've synchronize my phone, and run the second part, installing without problems, reboot > freeze on the boot screen htc
no way to synchronize again. my phone is reconized by mtty (1.51 and 1.50) but i don't know how to use it
ipl 2.09
spl 2.20.0000
gsm 02.47.21
os 3.0.0.0
i've tried all the night to find a solution on all forum i knew, i drive me to this one, i think it could help me best ( you'r pro dudes )
but i'm allways stick. i've call htc division hotline (i'm from france) , they said i have to send back my phone ( but he's now out of waranty, cause it's not a legal rom i've installed, so i have to paid, and i've allready too much invest on my device)
plz said me there is still a hope!
did try upload another rom from bootloader ?
did try upload another rom from bootloader ?
but first try a hard-reset
i don't know how to load a rom from bootloader (i allready have made soft and hard reset
no one could help me ?
1. dowenload this latest Qtek official rom from here: ftp://xda:[email protected]_220734_2207114_024721_QtekWWE_Ship.exe
2. enter your S200 into bootloader mode by pressing power +camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the S200 to your pc (make sure your battery is fully charged)
4. run the Qtek official rom.
5. good luck!
i've tried those kind of upgrade several time, but without possibility of establishing an active sync connexion, it's impossible to launch the rom install...
does samebody knew if it's possible to make a rom dump with an emulator and copy it on a sd card for autoinstall backup in bootloader mode ?
while in bootloader you don't need to establish any activesync connection. just plug the usb cable, then if appears "usb" on phone you are good to go.
install the original DOPOD rom from the ftp.
this rom don't work, it give me the message
error 294 invalid vendor id
it's now working ! great !
i've juste install again the step one of jester's aku3.3 (so, i'm on a 2.20 os, i think i'll keep it for a while )
thank you verry much
pti_nourson said:
it's now working ! great !
i've juste install again the step one of jester's aku3.3 (so, i'm on a 2.20 os, i think i'll keep it for a while )
thank you verry much
Click to expand...
Click to collapse
So you can now change your signature again, right
Guys,
I ve just downloaded this http://rapidshare.com/files/21256078..._DUT_11500.rar romversion in the understanding that it was for the HTC 9000 PDA. There was a file called MaUpgradeUt_noID.exe which I let 'upgrade' my 9000. However, I think something very VERY big went wrong! A reset by pushing the 2 buttons and reset button on the back gives me the option 0 to reset but all I can see after that is a black screen which says USB at the top and at the bottom v1.00
What happened and is this the end of my PDA? Sync won t work anymore now since my PDA can t be detected by windows because I can t get in the PDA!!!
Is there something I can do??!!!
PLEASE HELP ME OUT!!!!
Edit/Delete Message
sounds like you're just in bootloader mode
I think you are in what's called bootloader mode. Read the wiki to check - the screen you are describing sounds normal to me you plug you device into the comp via usb (with sync over usb disabled in active sync) then install a new rom.
You really shouldn't have tried to flash your rom without reading some instructions first but I think that your device should be fine.
If you have already upgraded your rom just do a hard reset and select the option to reset.
Will this thread help?
http://forum.xda-developers.com/showthread.php?t=310056
I'm sorry, this is the thread I ment to link:
http://forum.xda-developers.com/showthread.php?t=310054
strangely enough I found out that I DID use a good version picked from this http://forum.xda-developers.com/showthread.php?t=298020 post. In this thread mwang gives a link to here http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,40,30486,30486#msg-30486 where I picked the dutch version. I than double clicked the MaUpgradeUt_noID.exe file and the software for upgrading started. When he was at 100% he said the the ROM update was completed and that I had to do a reset. So, I than pushed the three buttons (2x the - button and the reset button at the back of the 9000) but all I than see is the bootloader menu with USB and V1.00...........
Sorry for putting it in three sub forum, my fault, but the device is from my work so I don t want it to be screwed up!!!
sanderh said:
Sorry for putting it in three sub forum, my fault, but the device is from my work so I don t want it to be screwed up!!!
Click to expand...
Click to collapse
Rather late now, but if it's owned by your company for work, should you really be di**ing with it?
Solution to probl: Stuck in Bootloader
The one way of fixing your problems....you're officialy stuck in bootloader,
Here's the way to fix it:
1. Stop Activesync USB connection on your machine under connection settings.
2. Uni : Reboot Bootloader then Connect USB ( If your phone isn't in bootloader already..)
3. PC : Run mtty1.42.exe ( Download from XDA's ftp site or search the forums, I'm sure you'll find it.)
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5.1 Press Enter
5.2 USB> (This will show up)
6. Type: Set 14 0
7. Press Enter
8. Run your rom update again and it should flash this time.
did it start??
did it start?? ?
Hi. first post.
Have an o2 exec. Different brand same deice and none of the other methods worked but finally got it working. Using mtty1.42.exe it would not see usb connection and therefore could not go down that route.
I booted into the bootloader mode that says serial at the top and v1.00 at the bottom.
Connected to the pc and cant remember if i stopped wcescomm.exe or not but you can try both ways.
Then started Midget_1990_v1_0_PU10_WWE.exe rom and followed the instructions and voila.
Hope this helps someone.
"Using mtty1.42.exe it would not see usb connection"
You need to disable the usb connection of active sync under connection settings and then only mtty will pick up a usb connection..
Hello Everyone
I need big time help. I just bought Hp 6945 and I tried to update GSM rom from 1.02 to 1.08, while updating it says update fail and try to restart Ipaq and start again. Now My problem is Ipaq just stuck to Hp invent logo. I tried to reset and hard reset and remove battery but notthing work.
I need help
Could some please help me to How to fix this problem?
Thank you
same BS happened to me. the only way to fix it is to load the UK 6915 ROM. thats the ONLY way to fix it. AVOID this update do not try to update the radio. I bricked my phone doing this. STILL looking for a solution. Radio stack is daamged.
where Can I find Uk 6915 rom
Thank you for reply. Where can I found the UK 6915 rom. Is there any instruction to How to load rom?
Thank you
If is FIXEDDDDDDDDDD
Ok
I got it fixed, very simple solution
found it here
http://pdaphonehome.com/forums/hp-h...dowloaded-rom-update-ipaq-dead-need-help.html
Solution:
this is what I did to get this fixed.
1) Get the battery out of the iPaq, and wait for a few minutes while the "serial" image fades away slowly.
2) In the meantime, prepare your cradle, plugged into the AC charger and plugged via USB to your PC.
3) After a few minutes, with the screen of the iPaq completely gray, put the battery and battery cap back on (with our without SIM card), and put it on the cradle immediately.
4) The iPaq should start coming back to life, as if it were being hard reset. Let is stay on the welcome screen (i.e., do not tap it or anything).
5) Restart the upgrade process, it should proceed from there OK
Thank you to origianl solution provider
No network connection
Ok everything work fine, but Now I cann't connect to tmobile. It keep showing me no service.
Any Help please
Ok It is fixed again
There is another update at HP website, which is software update. After installing that everything working fine.
can anyone help? i just bricked my ipaq 6965 too. had already followed those few instructions without any success.. what do you mean by "with or without SIM card"?
After a soft reset, mine's stuck at the initial blue/white boot screen.
Hard reset doesn't work (assuming its call + hang up + power + poke reset).
Ideas?
bring back to life hw6945
i'we tried like you to upgrade radio part and a got an freezed phone
Solution for repair was flashing firmware with this program..
Download-Link #1: http://rapidshare.com/files/96527845/Ipaq_HW69XX_ENG_ROM.zip.html
download files from rapidshare posted by me ,r tested on my phone
hi i have tried to dl the rom asi having the same prob but the file cannot be downloaded. is there any other way to get from you
garyakw said:
hi i have tried to dl the rom asi having the same prob but the file cannot be downloaded. is there any other way to get from you
Click to expand...
Click to collapse
If you are stuck on a HP Invent Screen, with G.39, etc.
And you have tried to hard reset and softreset with no luck, this is what you do.
XP Instructions:
1. Download this link http://www.mediafire.com/?3ygfbx0sjdy
2. In the taskbar area in the right hand corner, right click on activesync, bare with me, I'm using Vista and have to remember this, click connections..., you need to uncheck everything click ok or apply...
3. press ctrl-alt-delete, end process wscescomm.exe, (named something like that, end the process.
4. Extract the file you downloaded if needed.
5. Connect your device to the usb port on your computer.
6. Run Uni Exit Bootloader Application. Done
Vista Instructions:
1. Download these 2 links, and extract them if necessary.
http://www.mediafire.com/?3ygfbx0sjdy
http://www.mediafire.com/?9pmjkponfsg
2. Start Device Manager, (Start-Control Panel, Class View[Far Left Corner])
3. Connect HW6900 to USB port, you should now see a Mobile Devices (Next to + sign), Double Click
4. Right-Click on the Device, Click Update Driver Software, Choose let me pick from a list, Uncheck compatible hardware box.
5. Click have disk, Browse to location where USBAS is extracted, choose the wceusbsh.inf file, Double Click.
6. You should see Microsoft USB Sync, if not and it reverts back to the already installed file, and the box rechecks itself, uncheck it, choose microsoft, and choose the latest Microsoft USB Sync to install
GOOD LUCK
in reference to
Default bring back to life hw6945
i'we tried like you to upgrade radio part and a got an freezed phone
Solution for repair was flashing firmware with this program..
Download-Link #1: http://rapidshare.com/files/96527845...G_ROM.zip.html
its a no go here...
i get error 402.... times out and no can do.... what was that about german language... maybe i just need it spelled out. which screen does the unit need to be in. there is two... monochrome serial vs usb and there is the hp logo blue and white screen frozen indefinitely... please help i love this phone...
Hi, the rapidshare file is missing!
Could you give working link or send me the file to mail, please?
ipaq dude said:
Ok
I got it fixed, very simple solution
found it here
http://pdaphonehome.com/forums/hp-h...dowloaded-rom-update-ipaq-dead-need-help.html
Solution:
this is what I did to get this fixed.
1) Get the battery out of the iPaq, and wait for a few minutes while the "serial" image fades away slowly.
2) In the meantime, prepare your cradle, plugged into the AC charger and plugged via USB to your PC.
3) After a few minutes, with the screen of the iPaq completely gray, put the battery and battery cap back on (with our without SIM card), and put it on the cradle immediately.
4) The iPaq should start coming back to life, as if it were being hard reset. Let is stay on the welcome screen (i.e., do not tap it or anything).
5) Restart the upgrade process, it should proceed from there OK
Thank you to origianl solution provider
Click to expand...
Click to collapse
Man,r u sure the above can work well???? Confusing......I did the above like u indicated,but it's not work on my device HP6915,could u make it in details how u fixed the problem of updating ur device,thanks!
Regards,
Brose
Thanks, This help get me out of freeze
Thanks for posting this link. It brought my hw 6945 back out of the freeze. Stay away from HP's site update. Bad news
johnnynomadic said:
in reference to
Default bring back to life hw6945
i'we tried like you to upgrade radio part and a got an freezed phone
Solution for repair was flashing firmware with this program..
Download-Link #1: http://rapidshare.com/files/96527845...G_ROM.zip.html
its a no go here...
Click to expand...
Click to collapse
Thanks for UNIEXITBOOTLOADER thing, it makes my 6965 rocks again! Btw, could this file be used on other pdaphone such as O2 Atom? Thx b4.
Maybe
Most Likely Yes
bmw2320 said:
Thanks for UNIEXITBOOTLOADER thing, it makes my 6965 rocks again! Btw, could this file be used on other pdaphone such as O2 Atom? Thx b4.
Click to expand...
Click to collapse
cdguider said:
Most Likely Yes
Click to expand...
Click to collapse
I don't think so,Curtis.....But as I know most of dopod device hardly be dead....
I flash this phone with a wrong image, and now only a white screen appear.
Is impossible to make any key combination to get to the "download screen" or "update via k3img.bin".
But if i connect the cel via activesync I can see it on the desktop via trueconnection or any other remote control software (the cel is "working").
Some days ago, i make a dump of this cell and I have it on my computer (via pdocread), so my idea is to use the pdocwrite to at least write the first part00 to reprogram the buttons, so i can use a k3img.bin (in chinese... better than nothing) again.
But the software says that the partition is write protected, and I try almost all ways to unlock the Extended_ROM on windows and still says that is write protected.
Can u, masters of the cell phones help me?
Im facing the very same problen, so if some more knowledged might help us.
As Beastworm already described - I am too unable to get Download mode because of wrong button mapping.
nobody?
Beastworm said:
nobody?
Click to expand...
Click to collapse
Perhaps this programm can help you
k3 first aid kit
http://www.mobileuncle.com/thread-8799-1-1.html
I havn't tried it myself
By the way, did you make a hard reset after flashing? (Volume down + red + power.
Amaly said:
Perhaps this programm can help you
k3 first aid kit
http://www.mobileuncle.com/thread-8799-1-1.html
I havn't tried it myself
By the way, did you make a hard reset after flashing? (Volume down + red + power.
Click to expand...
Click to collapse
the buttons don't work. I will try the software now.
edit 1: Can u upload the software to megaupload? i don't have permission to download in mobileuncle
edit 2: OK, i reply and then i can download...
i connect the phone and nothings happend
Could you upload that software to somewhere else Beastworm ?
I'd like to give it a go.
tell me a good site to upload. Some people have troubles with rapidshare, others with megaupload, and others with others sites.
Tell me a site and i will upload.
here is the file
Thank you very much - It seemed to work on my phone !
Im in great debt to you guys for helping me out.
- Kalle Jokinen
JokinenK said:
Thank you very much - It seemed to work on my phone !
Im in great debt to you guys for helping me out.
- Kalle Jokinen
Click to expand...
Click to collapse
what u do?
and, what .img u use to reflash the phone?
I installed the app, connected the phone & waited until it was recognized as windows mobile. Started the IDT before the first aid kit & used image: P638M30_TH_UI1_L12_C7_CHS_MFGW_WM650_C02SPC002R01_091203.bin (WM6.5 Chinese).
After the IDT was waiting for the phone to connect, I started up the first aid kit & simply clicked Download mode and the IDT took care of the rest.
It took me two flashes to get it right, but after that it's been working as expected.
Im not sure, but if you're running either windows vista or 7, you might wanna run the first aid kit as an administrator.
nothing, i am in windows 7 (and running it as administrator) and the download mode button is still in grey
I will search for a xp machine and try again.
btw. The 6.1 chinese rom, have a good button mapping.
Do you mind sharing that working 6.1 image? And I hope you can revive your phone with some xp machine!
let me find it.
I dumped a working 6.1 English, but only the *.raw-files. I don't know how to get them together to a working image.
It's from a 01.001.IP638 EN, RomDate 9/15/2009, Radio Version 1.07.9235, Protokol Vers. DV3.0
Amaly said:
I dumped a working 6.1 English, but only the *.raw-files. I don't know how to get them together to a working image.
It's from a 01.001.IP638 EN, RomDate 9/15/2009, Radio Version 1.07.9235, Protokol Vers. DV3.0
Click to expand...
Click to collapse
i have a dump of a english too. But I don't know how to convert it as a .bin too
NEWS: MY PHONE IS ALIVE AGAIN (in a windows XP machine)
but.... i flash another bad rom , and now all is flipped like a mirror (and the buttons are still bad mapped )
The K3 First aid kit don't work now (it recognizes it, but when i press "download mode" the phone don't restart). Is a very clean spanish rom of 6.1, so i think that p638chinesestuff.cab that is installed when a hard reset is done, is the responsible to k3firstaid work.
So i will try to extract it from the dump, and install it on the phone, and try to reflash again.
Why I flash a bad rom?... i have a file with the name "K3imgCHI61.bin" and I think thats was the chinese 6.1.... but not. It is the Chilean (my country) 6.1
Fine, that your phone is alive again.
I read somewhere (I don't now where) that somebody solved the problem with the mirrored screen after flashing a new rom. He made a hard reset and after aligning screen everything was o.k.
Amaly said:
Fine, that your phone is alive again.
I read somewhere (I don't now where) that somebody solved the problem with the mirrored screen after flashing a new rom. He made a hard reset and after aligning screen everything was o.k.
Click to expand...
Click to collapse
I can't find the hard reset combination of this rom via buttons
And the startup clean via settings don't work.
can someone send me that p638chinesecharacters.cab file what is installed in the phone during a hard reset?
i try to extract it, but i can't
Hi guys,
some time ago i tried to upgrade my htc p3600 and as it was upgrading flash, it stoped.
from then, nothing is working in the phone.
i have made hard reset but it is not loading.(i guess there is no rom to load)
do you have any idea what i can do to restore my phone to work and install a better rom?(i have read about kitchens but i don't know what is it)
i have read many threads but i am confused about this.
could you give me a step by step guide what i can do?
thanks.
thanasisglt said:
Hi guys,
some time ago i tried to upgrade my htc p3600 and as it was upgrading flash, it stoped.
from then, nothing is working in the phone.
i have made hard reset but it is not loading.(i guess there is no rom to load)
do you have any idea what i can do to restore my phone to work and install a better rom?(i have read about kitchens but i don't know what is it)
i have read many threads but i am confused about this.
could you give me a step by step guide what i can do?
thanks.
Click to expand...
Click to collapse
friend follow this link
http://shipped-roms.com/index.php?category=windows mobile&model=Trinity
thanks for reply.
it does not work for me. this program is for updating rom and it needs to have the phone conected to the pc with activesync.
my phone does not open at all, so i can't establish an activesync connection and run the update.
any ideas?
a light or lights on the charger
1. Press on/off button + camera button + reset (using the stylus)
2. You should now be in tricolor screen.
3. Connect the usb cable.
4. Make sure you have activesync runing.
5. Install the rom provided in the link.
ok, thanks!