Help for my dopod 818pro - JAMin, XDA Neo, S200 General

my dopod 818 pro when i turn phone on , it will blink like lcd goes wrong , when i go into bootloader mode , its only show IPL 3.08 AND SPL 3.08 , what should i do now . please help !

Did the three color appear?

owleng said:
Did the three color appear?
Click to expand...
Click to collapse
when I connect the device to the charger the 3 colors appear
but when I connect it to the usb cable the screen is flicking with no responce
in the activesync.
Sorry I have the same problem and I even thought this is my post

yes i can go into bootloader mode , the 3 colour can be appear

Related

Bricked m600

ok i think iv killed my m600
i flashed it with the older imate rom the 1.0.9 version
it installed 100% and rebooted and from ther it was stuck on the imate screen for like 10 minutes and i see the following text in red on the top left corner
---------------------
IPL 2.10.0001
SPL 2.15.0001
GSM 01.14.20
OS 1.0.9.25
-------------------------
i tried removing the battery and restarting the fone. still the same thing. can someone please please please help me with this?
what do i do?
im sure orange wont help me out since i flashed it with a non-orange rom.
never mind fixed itby goin into the bootloader
funky_Saggi said:
never mind fixed itby goin into the bootloader
Click to expand...
Click to collapse
hi there i seem to have the same problem as you with the boot screen. top left corner say's
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 1.0.13.21
can you please tell me how you fixed yours please it would be a great help
What you could do is flash it with an newer rom
Hold camera button AND reset (be asure that it hold it while resetting)
Then... you are in you bootloader... connect the PDA with your PC..it will recognized it!
Then run the romupdate ;-)
Hi thanks for trying to help me i got my phone in to the 3 colour screen but my computer does not pic it up at all. is there another way to save my M600
crossy4life said:
Hi thanks for trying to help me i got my phone in to the 3 colour screen but my computer does not pic it up at all. is there another way to save my M600
Click to expand...
Click to collapse
Aren't you getting "USB" written in the bottom left corner of the 3 colour screen when you connect it to USB?
Yes i get the USB come up at the bottom of the screen my computer does not do anything. can you tell me which ROM i will need as the ones i have to run the ROM update but it comes back saying connect to ActiveSync which i can not do is there a way round this?
Final got my SPV M600 Working with the ROM from the download area thanks for the help anyway
cheers
just change the usb port to another one and start rom it should pick it up

m600 dead

i have a m600 its about 3 month old, just done a factory hard reset after having many problems getting it to stay on, after about a hour of ****ing about with the mains charger it decided to turn on, however just kept on rebooting, back to the boot screan, not the 3 clolred boot menu, but the orange start screen with numbers like 2.1.001? however now it has been stuck on the blue windows mobile screen for 5 mins and not changed, it is pluged in to mains but i have no lights ilununated not green or orange or red? i know this is a long shot but any ideas befor i smash it through my local orange shop window?
I think the solution is use mtty tool doing format the DOC is OK
MANH Fone said:
I think the solution is use mtty tool doing format the DOC is OK
Click to expand...
Click to collapse
WHaat does it mean ?
MY phone is stucked too at the screen where
ip 2.10.0001
Spl 2.10.0001
Gsm 02.07 .20
Os 2.10.1.30
are after a tentaive of changing ROM.
Merci
Ciao
Stef
feffo said:
WHaat does it mean ?
MY phone is stucked too at the screen where
ip 2.10.0001
Spl 2.10.0001
Gsm 02.07 .20
Os 2.10.1.30
are after a tentaive of changing ROM.
Merci
Ciao
Stef
Click to expand...
Click to collapse
Ola,
just for info.
I made a big mistake detaching the cable during tentatve of CID unlock
My SPV M600was dead ....
Thanks to deep investigation mainly on his forum I found the solution:
Hard reset the M600: Photo button + COmm Manaer buttor + stylo in the ole near usb connector (soft reset),
releasing first the comm button, leving photo button pressed
this leave you in a multicolor screen with usb written in the bottom left (if connected to PC)
then I run the ROM updater that I found here:
http://forum.xda-developers.com/showthread.php?t=297489&page=3
In 10 minutes it as reborn, and I was happy again
Ciao ciao
MANH Fone said:
I think the solution is use mtty tool doing format the DOC is OK
Click to expand...
Click to collapse
How 'bout all task? Can you show me ?
Hi i have the same problem i updated my M600 when i went to charge it no lights came on and the fone failed to come on i have tryed to do a hard reset and a sort reset but the fone just looks dead any advice plzzzzzz?
yeah, try turning it off, or remove the battery. Then hold the camera button. Then insert USB. Phone should show bootloader (3colour screen). You can now flash official RUU.
have some on try to flash a original rom with IPL/SPL/Radio Rom/OS?

is there something to do 4 thos wizard

I had a wizard and trying to fix it.
When switch on, blue cingular screen appears and show ipl spl gsm os numbers.. and halts on.... it stays like this...
i enter RGB screen it says ONLY `ipl 2.25 spl 2.25` ...
when i connect it to usb.. USB text appears but when I try to install `love ROM` RUU says, it is not connected check computer check usb cable.. so it is invisiable for computer but in device manager it s shown as winCE syc device when I connect..
do u think it is bricked.. Or theres some to do....
thanks
it wasnt dead...
thanks to this forum!!
m_carleone82 said:
I had a wizard and trying to fix it.
When switch on, blue cingular screen appears and show ipl spl gsm os numbers.. and halts on.... it stays like this...
i enter RGB screen it says ONLY `ipl 2.25 spl 2.25` ...
when i connect it to usb.. USB text appears but when I try to install `love ROM` RUU says, it is not connected check computer check usb cable.. so it is invisiable for computer but in device manager it s shown as winCE syc device when I connect..
do u think it is bricked.. Or theres some to do....
thanks
Click to expand...
Click to collapse
Hi,all,i have this problem........ipl 2.17 spl 2.17....please help.......
m_carleone82:
press Camera+reset to enter RUU mode, then flash with Cingluar original ROM.
starkwong said:
m_carleone82:
press Camera+reset to enter RUU mode, then flash with Cingluar original ROM.
Click to expand...
Click to collapse
Hi Starkwong.....i have the same problem .....can i reflash to original rom even my MDA is not recognized by my PC?.....thanks for your reply
ichiban said:
Hi Starkwong.....i have the same problem .....can i reflash to original rom even my MDA is not recognized by my PC?.....thanks for your reply
Click to expand...
Click to collapse
Yes ! if it gets into Bootloaders mode(tricolor screen) with ipl/spl display and when hooked up with pc via usb,a small usb appears at the bottom of the Bootloaders,it means it has connectivity with the pc,You can flash the official rom in the Bootloaders.
ahhh, hardreset. the pumpkin in my eye.
"m_carleone82:
press Camera+reset to enter RUU mode, then flash with Cingluar original ROM."
I´m right now on the RGB screen , and how can now put the original ROm????
please help me
thx
hugomalheiro said:
"m_carleone82:
press Camera+reset to enter RUU mode, then flash with Cingluar original ROM."
I´m right now on the RGB screen , and how can now put the original ROm????
please help me
thx
Click to expand...
Click to collapse
While in Bootloaders (RGB) screen,hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloaders,run the RUU in the Rom you downloaded,follow the instructions,it'll start to flash.let it finish and the phone will reboot.

help hermes 100 shutdown for good

i try to install new rom , after it restart it showed the 3 colors on the screen and from then it went off and it show the colors in a very dark light. and i cant flash or start the windows,also it doesnt restart.
any one can help me out
thanks
Did you have hardspl prior to installing the ROM? Anyhow, running your carrier stock ROM should get you going Then you can install any ROM you want (give that you have hardspl).
What do you mean running me carrier stock ROM ? I cant connect it with the pc to do something and the screen is black when i try to restart or when i reinstall the battary in again. but in the screen it show me the 3 colors in a very dark light no lights in the buttons are working.
And there is not red led when i connect with usb cable
gmenelau said:
i try to install new rom , after it restart it showed the 3 colors on the screen and from then it went off and it show the colors in a very dark light. and i cant flash or start the windows,also it doesnt restart.
any one can help me out
thanks
Click to expand...
Click to collapse
u r PC able to detect u r phone?
(i mean when u plug u r device to computer, it will automatically detect the device, and phone display will show USB instead of SERIAL)
if yes, u may install Hard-SPL-V7 Olipro V7 2.10 (file attached) with Force Unsafe SSPL (not recommended) option selected.
if u managed to do this, u will be able to flash any rom and u r phone not gonna brick any more.
No the computert it can not detect the device .
No the computert it can not detect the device .
gmenelau said:
No the computert it can not detect the device .
Click to expand...
Click to collapse
how about in boot loader mode? is u r computer able to detect phone? (u will C USB mode displayed in tri color screen)
boot loader mode : hold u r OK button (near wheel) + power button and use styles in reset hole....keep that way till u c the tri color boot loader screen
Also make sure you untick "Allow usb connections" in activesync connection settings on the pc. Also reset into bootloader mode.
You may have hardware as well as rom trouble if you can "see" the bootloader in darkness. I had the same trouble that turned out to be the flywheel needing replacement. Hopefully you won't have these problems...
Cheers...
Also , on the tri-colour screen, can you make out what the IPL and SPL are? To fix this you need Hard SPL(if hard SPL will be 2.10 olipro) installed and without it this could soon become a nightmare and you could become bald from frustration...
i try what you said expet the one for the flywheel ! still nothing , i also i notice that the led for the battery when i connect it with the usb or the caple it start for a sec., and then it shut down ...
ultramag69 said:
Also make sure you untick "Allow usb connections" in activesync connection settings on the pc. Also reset into bootloader mode.
You may have hardware as well as rom trouble if you can "see" the bootloader in darkness. I had the same trouble that turned out to be the flywheel needing replacement. Hopefully you won't have these problems...
Cheers...
Also , on the tri-colour screen, can you make out what the IPL and SPL are? To fix this you need Hard SPL(if hard SPL will be 2.10 olipro) installed and without it this could soon become a nightmare and you could become bald from frustration...
Click to expand...
Click to collapse
I cant see anything i am sorry .Ii try what you said exept the one for the flywheel ! still nothing , i also i notice that the led for the battery when i connect it with the usb or the cable it start for a sec., and then it shut down ...

HTC P3400 Bricked Help needed.

Hi,
while updating my ROM of HTC P3400, i have bricked it. Now when i press any button on the phone nothing happens. Only red and green light flashes once and nothing else happens. No bootloader mode (tri color). No battery charging indication nothing. Phone is compeletely dead. I have some ROM images and set of tools (mentioned on this site) available with me. Please help me recovering my cell phone. let me know some links etc or any other means of getting my cell phone back.
I am in need of desperate help.
thanks
Ashish
Dude read properly here. esp from step no.4
if u tried olip's method n ur mobile is not working.this indicates u hav new gene.proceed from step no.4 from here
i am not able to come in Boot loader mode as well. When i press cmaera key with power on key...nothing happens. Battery is also not out. i have tried my phone's battery successfully in frn'z cell.
Power on your device. When the leds blinks hold camera button and reset the device. That way you should go to bootloader mode and flash another rom.
When I have that problem I solve this way.
Thanks a ton man...
i have flashed new rom and it works absolutely fine.
htc gene bricked
guys I have the same problem. My htc gene is bricked.I have tried all the methods. I am unable to recover using Orefkov's method. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens. I am even not getting the tri color screen.please help me.
Not bootloader mode
i pressed camera button+power buttton but nothing happen
plz help me what i do????//
how can i get now booltloader mode
I have the same problem when i enter to bootloader the usb appears on the bottom of screen but i can"t execute the ""mitty.exe""".there is no usb button...
I also stop the webcomm.exe from task manager ;;;; pls hellp meeeeeeeeeee,,,,,
pressed camera button+power buttton but nothing happen
Click to expand...
Click to collapse
Hold the camera button and press the reset button. Read what ramersonw has said.
I also stop the webcomm.exe from task manager
Click to expand...
Click to collapse
Right click on the Activesync icon and deactivate USB Connection. Wait for the device to be recognized, if it is not being recoginized, change the cable.
ALso BRICKED
Very stck, my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.07.oref
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
Vitor Jose said:
Very stck, my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.07.oref
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
Click to expand...
Click to collapse
You can install any ROM you feel like, the choice is yours - just make sure that it says that it is for "New Gene"
PPL, I've tried all of it.. hold the camera key and reset/power on etc but my p3400 denies to boot. only answer n disconnect key blinks while trying to reset.
while trying to press the power on key nothing happens,,, no led blinks at all....
pls help...
ramersonw said:
Power on your device. When the leds blinks hold camera button and reset the device. That way you should go to bootloader mode and flash another rom.
When I have that problem I solve this way.
Click to expand...
Click to collapse
Hi,
I m having the same problem. I have tried as per your instruction. I m getting the tricolor screen written ONBL 1.17.000 SPL 1.10.Olip
When I m trying to upload ROM, it is showing : error 300 invalid update tool
Pls help.
my HTC still well not run
Vitor Jose said:
Very stck, my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.07.oref
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
Click to expand...
Click to collapse
my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.10.Olip
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
---------- Post added at 01:40 AM ---------- Previous post was at 01:34 AM ----------
[email protected] said:
Hi,
I m having the same problem. I have tried as per your instruction. I m getting the tricolor screen written ONBL 1.17.000 SPL 1.10.Olip
When I m trying to upload ROM, it is showing : error 300 invalid update tool
Pls help.
Click to expand...
Click to collapse
The same
my HTC still well not run
I have tri colours
ONBL 1.07.0000
SPL 1.10.Olip
When I m trying to upload ROM, it is showing : error 300 invalid update tool
Pls help
Thanks
HCT p3400i is dead pls help
my htc p3400i is only blink red and green light pls give the solution pls pls pls bro i need this phone its very urgent do something pls
jamshed said:
my htc p3400i is only blink red and green light pls give the solution pls pls pls bro i need this phone its very urgent do something pls
Click to expand...
Click to collapse
try to flash rom your device ! here tutorial to do it --> http://forum.xda-developers.com/showthread.php?t=472169

Categories

Resources