i try to install new rom , after it restart it showed the 3 colors on the screen and from then it went off and it show the colors in a very dark light. and i cant flash or start the windows,also it doesnt restart.
any one can help me out
thanks
Did you have hardspl prior to installing the ROM? Anyhow, running your carrier stock ROM should get you going Then you can install any ROM you want (give that you have hardspl).
What do you mean running me carrier stock ROM ? I cant connect it with the pc to do something and the screen is black when i try to restart or when i reinstall the battary in again. but in the screen it show me the 3 colors in a very dark light no lights in the buttons are working.
And there is not red led when i connect with usb cable
gmenelau said:
i try to install new rom , after it restart it showed the 3 colors on the screen and from then it went off and it show the colors in a very dark light. and i cant flash or start the windows,also it doesnt restart.
any one can help me out
thanks
Click to expand...
Click to collapse
u r PC able to detect u r phone?
(i mean when u plug u r device to computer, it will automatically detect the device, and phone display will show USB instead of SERIAL)
if yes, u may install Hard-SPL-V7 Olipro V7 2.10 (file attached) with Force Unsafe SSPL (not recommended) option selected.
if u managed to do this, u will be able to flash any rom and u r phone not gonna brick any more.
No the computert it can not detect the device .
No the computert it can not detect the device .
gmenelau said:
No the computert it can not detect the device .
Click to expand...
Click to collapse
how about in boot loader mode? is u r computer able to detect phone? (u will C USB mode displayed in tri color screen)
boot loader mode : hold u r OK button (near wheel) + power button and use styles in reset hole....keep that way till u c the tri color boot loader screen
Also make sure you untick "Allow usb connections" in activesync connection settings on the pc. Also reset into bootloader mode.
You may have hardware as well as rom trouble if you can "see" the bootloader in darkness. I had the same trouble that turned out to be the flywheel needing replacement. Hopefully you won't have these problems...
Cheers...
Also , on the tri-colour screen, can you make out what the IPL and SPL are? To fix this you need Hard SPL(if hard SPL will be 2.10 olipro) installed and without it this could soon become a nightmare and you could become bald from frustration...
i try what you said expet the one for the flywheel ! still nothing , i also i notice that the led for the battery when i connect it with the usb or the caple it start for a sec., and then it shut down ...
ultramag69 said:
Also make sure you untick "Allow usb connections" in activesync connection settings on the pc. Also reset into bootloader mode.
You may have hardware as well as rom trouble if you can "see" the bootloader in darkness. I had the same trouble that turned out to be the flywheel needing replacement. Hopefully you won't have these problems...
Cheers...
Also , on the tri-colour screen, can you make out what the IPL and SPL are? To fix this you need Hard SPL(if hard SPL will be 2.10 olipro) installed and without it this could soon become a nightmare and you could become bald from frustration...
Click to expand...
Click to collapse
I cant see anything i am sorry .Ii try what you said exept the one for the flywheel ! still nothing , i also i notice that the led for the battery when i connect it with the usb or the cable it start for a sec., and then it shut down ...
Related
Hi,
I tried a new rom and now am stuck at the bootloader with no OS on the phone.
ipl 2.10.0001
spl 2.10.0001
gsm 02.69.21
os 4.0.0.0
I have searched all the forums and still cannot get my spvm600 to do anything. I have tried to run several roms but the problem is they cant see the phone as activesync wont connect. is there a way i can boot from the sdcard or somthing or do i have a expensive paperweight. when i try to hold down the camera and comms keys on start it asks me to format the device and then says doen and goes back to the above screen
anyone?
ideas?
Try to restart your device and deliberatly go to boot loader (keep camera button in) (keep usb disconnected).
once at boot loader screen connect usb cable ... you should now see "usb" in bottom left corner on device screen.
now run a wm5 rom like in step 1 of "how to upgrade from WM5 to WM6" thread - - http://forum.xda-developers.com/showthread.php?t=310452.
it worked for me!
every rom i try to install on it needs activesync to connect to it but activesync douesnt connect to it as the phone has been formatted. there must be a way to fix it but but i am totally stuck
Rom Upgrade doesnt need Active Sync, you just need to be in bootloader and have the usb cable connected. Then just go through the update utility.
I try that and it still seems to say no device connected would you like to try copying again. I cant understand it cause it makes that bling noise when i plug it in
Use Update_NOID
You must use the No_ID Updater to upload a ROM from the 3 colour screen. Just run this exe file and you should not have any problems.
Hi,
Please help, I too have the same problem. Installed all the versions but no use. Can any one help me how to downgrade to Original German ROM version for Neo. So that I can return to O2 company... otherwise this become expensive paper weight
thankyouthankyouthankyou
YEEAAAAHHH
my phone is now working.
the no id rom worked a treat.
xtrafletch thanks a million!!
Hello,
i tried to update my BA with wm6.
after flashing it stuck in bootloader(blue,green,red,white display) with the line "R 1.10.00" and nothing more...
even hard or softreset do nothing.
what can i do?
ok i even try the Stuck at startup method.
that's the output of Multiport TTY Version:
set 14 0
HTCST ÚÈÒHTCEUSB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>task 0
it always stuck in blue,green,red,white screen after run multiport tool. what can i do?
------------
i have this problem because of this flashing method:
i entered the grey screen (with serial/usb in first line). then i put my usb connection on and run the rom_update. after it is finished (succesfully) it stuck in the blue, green, red, yello screen! help please...
how did you hard reset?
hello,
i hold down the power-button and at same time put stylis in reset.
hard reset for both WM5 and WM6 is different from the one you're doing. here's the guide...
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
good luck!
ok thanks, i have tried this:
i do softreset. whenn the stripes came i push "records and "camera"(media player button because there is no camera)---> nothing happens. it stops with the line R 1.10.00 and the coloured stripes.
i dont knwo what to do.
the bootloader method is running. i hold power and record button while i softreset. but with color screen it wont work.
they is no camera button (it is media-player button) because there is no camera. its an german xda III (blue angel).
the next problem is i dont knwo what os is right now on it. befor flashing it was wm2003 and flashing says it was successfully. i dont know if its wm6 or wm2003!
ok now all is happen...
the xda says nothing. it dont go on, it dont work anymore. no lights when in cradle, nothing.
can i do anything?
1. Take the battery out, wait a moment, put it back, do not turn on. Put in the cradle and try to charge it. Use power connection (from power supply), disconnect USB from the computer for charging. Amber led should turn on.
2. When it will be fully charged (amber LED will turn off) try to turn it on and enter bootloader. Try to downgrade to WM2003. If it works fine, try again to flash WM5 or WM6.
What you did seems to be wrong update (wrong rom, wrong file, not fully flashed). But you still have bootloader, so it should be possbile to flash it. But you need full battery.
jakubd said:
What you did seems to be wrong update (wrong rom, wrong file, not fully flashed). But you still have bootloader, so it should be possbile to flash it. But you need full battery.
Click to expand...
Click to collapse
it was not unlocked befor i flashed with bootloader-method.
i charged the battery in cradle (withoud the blue-angel). the led first went orange, after a while turned green (fully loaded). put it back in BA an nothing happens. then put BA (with battery) in cradle and the led became red.
no action on devide, no feedback, nothing. it wont turn on but led is still working.!?
jakubd said:
2. When it will be fully charged (amber LED will turn off) try to turn it on and enter bootloader. Try to downgrade to WM2003. If it works fine, try again to flash WM5 or WM6.
Click to expand...
Click to collapse
ok i get it. in display is the "USB" & "v2.07". now i can flash. but my problem is the phone is not unlocked yet. what file can i flash now??
This message tells you are in bootloader mode. Now you can perform normal flash - I would propose you to use tested&working rom (WM2003?). If this works fine, try again to upgrade to WM5/WM6.
BTW: if you disconnect USB (take out BA from cradle) it should show Serial instead of USB.
ok big tanks to the forum. i finally get it. wm6 german on blue-angel!
Same thing here... but worst..
My 9090 is stuck at bootlader...
When i try to update, (i press the power, record and reset), it says:
SERIAL (or USB)
DOC VERSION IS ERROR!
v2.08
Any idea???
that's normal...
try to flash/update your BA in that screen.
the easy way to go into bootloader mode is to execute a file called Enter Bootloader.exe ..it comes with the rom u download..( well it came with xplodes )
Note:- you have to execute this file directly on your deive not on your desktop PC...and i have only tested this on WM 2003..maybe it will work with wm6 also
SilverSamurai said:
that's normal...
try to flash/update your BA in that screen.
Click to expand...
Click to collapse
I there...
I just updated to BA_TMNL_14200_119_11300_Ship, but only with Maupgrade, couldnt do it with baupgrade...
The problem is that i cant put extended rom, whem i try to upgrade is allways an error... and in the settings i dont have extended rom instaled...
Besides that the batery only last 1hour and the PDA is always freezing... i'm always doing resets...
any idea??
Sorry for my bad english by the way...
alright.. i made a similar post to this before and i came across the wiki...
well i can't view what my SPL or my IPL because as soon as i turn the device on, all that shows is the boot loader screen and displays serial on the top with 0.16-0.90 in red characters on the bottom (I'm not sure what those are)...
here are the only details that i know about my phone:
I DON'T have hard SPL
My Original ROM i was using before was an htc windows mobile 5 rom
The reason that my phone is bricked right now is because the usb cable disconnected in the middle of the flash
I'm using Windows Vista for flashing
Computer won't recognize the phone when on usb
My phone (qtek 9600) can't load the operating system
*EDIT*
THE PHONE IS STUCK ON BOOTLOADER WHEN I TURN IT ON, NOTHING ELSE, BUT THE BOOTLOADER SCRREN DOESN'T SHOW MY SPL AT ALL.
ALSO, MY COMPUTER DOESN'T RECOGNIZE THE PHONE....... MY PHONE HAS A TYPE 2A BRICK
Helping me will be greatly appreciated
come on.. I'm without a phone
Do you have a 2GB or smaller SD card? Copy a rom image to it and rename it HERMIMG.NBH
Turn it on and you might get lucky!
Just make sure its stock rom that was supplied, or the updated WM06 version as the CID should check out then...
vwkess forgot to mention, reset into bootloader, hold power, ok button and reset with stylus. Hold all buttons in until you get to the tri-colour screen. If it works, follow the prompts....
Cheers...
hi,
i think i can hlep.
i had recently bricked my phone with a custom wm6 image, it worked fine for two days and then i reboot, and all i see was the welcome image, nothing else.
so what i did is -
i pressed the hard reset buttons - power + OK + SOFT RESET (Stylus), kept it pressed for 3-4 seconds, the fone rebooted, the screen was full with some colored bricks i connected my fone in USB and on screen i saw USB.
I then again flashed my fone with the working update, it worked perfectly for me, try may be you can get some luck
ps - before doing all these, i turned my fone off by removing the battery, i removed sim card and mmc card as well.
regards
That may work too, but again, try to flash with a stock rom, untick "connect with USB" in activesync and then try.
Make sure you go to boootloader screen, instruction in rajivlodha's post, before you connect to the pc.
Goodluck...
I need some help as well.
I think I may have bricked my phone. It's a rooted htc hero cdma. I'm running cyogenmod on it and it was working fine, until using metamorph to apply some changes to the theme.
I went to reboot, and it now it won't load past the htc screen. Even when i try the key combination to put it into recover mode. I didn't install a nandroid backup, and i'd be fine with just completely wiping my phone. help is appreciated.
im getting to the yes/no page but when i press r nothing is happening??????
thunderider said:
im getting to the yes/no page but when i press r nothing is happening??????
Click to expand...
Click to collapse
I assume you mean a hard reset to completely revert your phone to factory settings.
I also assume that the two soft keys and stylus in the hole is giving you the yes/no question.
The alternative could be to try:
Start>Settings>System (Tab)>Clear Storage (Icon)
Mike
cheers mike...im constantly finding the whole experiance frustrating with this phone...might stick it a jify bag to you to upgrade
i think this is the end of the road for me n hermes,i did a rest as above ,that worked ok,i though before i set everything up again ill put a new rom in it,ive got ruu-hermes-tmo 3.60.110.4,if thats right?,it gets to the screen red green blue white,i presume this is hard spl or bootlocker? but it wont active sync with the computer,so im gonna ditch it,its to unstable for anything,ever simply downloading photos becomes a pain as its always running out of memory,als it still wont recognise my sd card wich has everything on so its usless....back to the sonr k8501 while i look for something else...iphone....blackberry...e71....communicator....these htcs are not simple bits of kit...
thunderider said:
i think this is the end of the road for me n hermes,i did a rest as above ,that worked ok,i though before i set everything up again ill put a new rom in it,ive got ruu-hermes-tmo 3.60.110.4,if thats right?,it gets to the screen red green blue white,i presume this is hard spl or bootlocker? but it wont active sync with the computer,so im gonna ditch it,its to unstable for anything,ever simply downloading photos becomes a pain as its always running out of memory,als it still wont recognise my sd card wich has everything on so its usless....back to the sonr k8501 while i look for something else...iphone....blackberry...e71....communicator....these htcs are not simple bits of kit...
Click to expand...
Click to collapse
The tri-colour screen is bootloader. Once in bootloader connect your device to your pc. The bottom of bootloader should change from 'serial' to 'usb'. Once usb' is shown you are able to flash rom
hi spartan,wots happening now,i can active sync the phone to pc,but one i launch the ruu,it goes in to boot loader then active sync closes down,not connected,also i found after doing hard reset it no longer sees my sd card....wich had everything on it....but i have no card reader/adaptor.....
thunderider said:
hi spartan,wots happening now,i can active sync the phone to pc,but one i launch the ruu,it goes in to boot loader then active sync closes down,not connected,also i found after doing hard reset it no longer sees my sd card....wich had everything on it....but i have no card reader/adaptor.....
Click to expand...
Click to collapse
It is normal procedure for activesync not to be running when in bootloader as phone is not booted up. To flash a rom all you need is phone connected to pc via usb cable. You do not need activesync.
Put phone into bootloader. Bottom of screen should say 'serial'. Now connect phone to pc via usb cable. Bottom of bootloader should now change to 'usb' after a few seconds. You are now able to run ruu file from pc
HI,
I just had this problem and I saw that a ton of others had it too. It was where my phone would stop at the windows screen and not boot, and my PC wouldn't read the phone so I couldn't load a new rom or Hard SPL. How I fixed it was by getting my phone into bootloader mode, (the multi colored screen). Here's how to do it.
While phone is Off:
Hold Volume down & press power button
While phone is On
Hold Volume down & press Reset Button (meaning the little yellow button by the battery that you have to press with a pen to soft reset it)
Once your on the bootloader screen, plug your phone into your PC, you will hear the ding that the computer recognized it but your Windows Mobile desktop software will still say your not connected, don't worry about that,, you are connected. After that, just pick whatever rom you want, then just install it like normal. and it works. If your not running a rom, do the same but install hard SPL instead of a ROM.
I hope this helps,
As long as your phone turns on at least to the opening screen there is hope.
kn0t.
i had that problem, my phone was stuck on stock together splash screen, but I just called up tmo and they have sent me a new hd2.
Three words. I LOVE YOU! well not really since I'm not gay ha!
By the way This also works for the HTC Imagio!
can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?
waigstar said:
can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?
Click to expand...
Click to collapse
Ok first off what ROM do you have and what SPL does it show when you are in the muticolor bootloader screen? Secound if you are trying to flash a ROM yse right clicking the .exe file and selecting run as adminastrator is a good idea. l
I had the same problem.. what usually helps for me is when it gets stuck.. pull out the battery and give it a solid 15-20 minutes.. and then turn it on and do nothing up until after it has booted
i do the battery thing but i cant go on doing this , i put a little txt or phone call and the phone goes bonkers and heats up,nightmare!
ok on the tri colour screen it says
PBB110 HX-BC
SPL-S.08.0000 8G XE
MICRO(LED) 0X05
MICROP(TOUCH)
SERIAL
AH!! just got into the boatloader screen !! by pressing volume up and down together~! rest it! but i need to wait cos ive pulled the battery again!!!
I am having the same issue. I had a android rom then was finally able to flash via sd the stock rom, but it would just freeze on splash screen when trying to boot. Now when I try to flash rom again it will start and freeze on 1%. Any suggestions?
Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol
stormohio said:
Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol
Click to expand...
Click to collapse
Ok try going to windowsmobile.com/getstarted and download and install the latest version of ActiveSync or Windows Mobile Device Center (WMDC) , wich ever one you have to have for your computer, and install it on your computer as they have updated USB drivers for your HD2.
have you tried loading a rom from the root of your memory card LEOimg.nbh?
i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken
melodicstealer said:
i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken
Click to expand...
Click to collapse
You need to put your phone into bootloader then your computer will recognize it. Hold the volume down button down while you power on the phone and the multicolor bootloader will come up. Next connect your HD2 to your computer via your USB cable. Wait for the Serial in the white bar of bootloader changes to USB and then flash. If you go to the device manager of your computer while you see USB on your phone it should say HTC USB Sync if you want to be assured that you have a connection to flash with.