A disaster!
My very good friend (Qtek S100 Italian) have a big trouble!!!!
Now it's on boot loader and no way to go out :shock:
I think that the rom was f**ked, I try with a SD with the rom(I used Multi-port/USB TTY Ver1.11a to do it with another Qtek) but the PDA don't show the download menu
I tried with the original ROM from Dangard but the program say that the rom was not for my device
I used the MaUpgradeUt_noID, but it's not working
the pda screen is always on boot loader, changing only from serial to USB (when I Connect)
I don't know if I can use Multi-port/USB TTY to solve my situation, I tried to use the lnb command but the answer was that I have not the permission
By the way, I disconnect the battery and wait, but when I give power I have always the boot loader
Any way to help me? tnx
Stefano
Whats needed:
TyphoonNBFTools: http://w1.whatcounter.com/dlcount.p...yphoonNBFTools_0.3_SPL1010064_SPVServices.zip
Any Official Rom (I used I-Mate SP3 WWE).
A Typhoon running Windows Mobile 5.0.
Reverting Back:
Run TyphoonNBFTools and Open the SPL1010064.nbf. Right click on SPL in the bottom part of the screen and choose Emergency Flash. If this is the first time you have used the program you will get a prompt on your phone to run the runtimes. Choose yes. Click OK to flash the new bootloader to your phone. Next disable Activesync by turning off USB connections. Turn off your phone. While holding down the Camera button insert the USB cable, the phone should run the bootloader and you will be presented with the tri-color screen. It should say USB in the bottom corner. Now run Mtty and choose USB connection. Hit enter in the blank white space. You should now see Cmd>. Type "info 2" without the quotes. You should see some information about your phone. Next type "format BINFS" agains without the quotes. This one is case sensitive. You should see format complete or something along those lines. Now close Mtty and re-enable USB connections. Run the exe from the update you downloaded and follow the instructions. Your phone should now boot back up to WM2003.
For those stuck in bootloader mode you will need to run mtty and reflash the wm5.bin to the phone then follow the steps above.
Leiden said:
Whats needed:
TyphoonNBFTools: http://w1.whatcounter.com/dlcount.p...yphoonNBFTools_0.3_SPL1010064_SPVServices.zip
Any Official Rom (I used I-Mate SP3 WWE).
A Typhoon running Windows Mobile 5.0.
Reverting Back:
Run TyphoonNBFTools and Open the SPL1010064.nbf. Right click on SPL in the bottom part of the screen and choose Emergency Flash. If this is the first time you have used the program you will get a prompt on your phone to run the runtimes. Choose yes. Click OK to flash the new bootloader to your phone. Next disable Activesync by turning off USB connections. Turn off your phone. While holding down the Camera button insert the USB cable, the phone should run the bootloader and you will be presented with the tri-color screen. It should say USB in the bottom corner. Now run Mtty and choose USB connection. Hit enter in the blank white space. You should now see Cmd>. Type "info 2" without the quotes. You should see some information about your phone. Next type "format BINFS" agains without the quotes. This one is case sensitive. You should see format complete or something along those lines. Now close Mtty and re-enable USB connections. Run the exe from the update you downloaded and follow the instructions. Your phone should now boot back up to WM2003.
For those stuck in bootloader mode you will need to run mtty and reflash the wm5.bin to the phone then follow the steps above.
Click to expand...
Click to collapse
Man! Can't thank you enough for this. I took my phone to the service centre, willing to pay for the repair, and they could not do it. Every thing works fine now. Very good manual, clear instructions and correct info!
THANKS!
Hi
I Am Trying To Follow The Procedure Mentioned. But When I Right Click On Spl I Am Not Getting 'emergency Flash' Active.
Can U Please Assist Me Regarding This
You need TyphoonNBFTools.dll installed on your phone. Try running TyphoonNBFTools and selecting Tools->Immediate Flash Tools->Test Immediate Flash. It should automatically install the required stuff for you. Check you phone when you run the program. You should get a prompt to installed a program from unknown publisher. Make sure to choose yes.
Stuck in bootloader
Just trying to do this following my question here.
I though it was going well but I have a major problem now! I managed to do the emergency flash, but every time I boot I just get the tricolour bootloader screen (IPL 1.00, SPL 1.01.0064) and can't get any further. Any ideas please? I have tried using mtty to load wm5.bin but get the error "MTTYDownloadImageNot allow operation!"
I have also tried re-doing the "format BINFS" and doing the above again but still no joy.
Any ideas would be much appreciated!
maybe u need to make a "goldcard"
my feeler (o2 xphoneII) lives again after flash with goldcard.
I can't find a way to create one for Typhoon, can you point me in the right direction?
I try flash Amadeus = Qtek 8100 with UpdateTool from Qtek 8310.
Update process stopped at 74% , and UpdateProgramm closed.
Now my Qtek 8100 not Powered ON , and can't enter in boot mode (tricolor screen) with "Camera" button hold + USB cable conneting.
PC don't see any USB devices when I connected my Qtek 8100 to USB port.
I think I erased Boot loader in my Qtek 8100 (but not sure).
Is any method for repair ?
WBR !
er1cc said:
I try flash Amadeus = Qtek 8100 with UpdateTool from Qtek 8310.
Update process stopped at 74% , and UpdateProgramm closed.
Now my Qtek 8100 not Powered ON , and can't enter in boot mode (tricolor screen) with "Camera" button hold + USB cable conneting.
PC don't see any USB devices when I connected my Qtek 8100 to USB port.
I think I erased Boot loader in my Qtek 8100 (but not sure).
Is any method for repair ?
WBR !
Click to expand...
Click to collapse
UR Phone is fried!
this happens to almost 1 out of 20 users.....that while downgrading/upgrading to another bootloader, ur phone becomes dead....
DomConway said:
Just trying to do this following my question here.
I though it was going well but I have a major problem now! I managed to do the emergency flash, but every time I boot I just get the tricolour bootloader screen (IPL 1.00, SPL 1.01.0064) and can't get any further. Any ideas please? I have tried using mtty to load wm5.bin but get the error "MTTYDownloadImageNot allow operation!"
I have also tried re-doing the "format BINFS" and doing the above again but still no joy.
Any ideas would be much appreciated!
Click to expand...
Click to collapse
get the tricolour bootloader type in mtty info 2 the type format BINFS then upgrade using rom upgrade
DomConway said:
Just trying to do this following my question here.
I though it was going well but I have a major problem now! I managed to do the emergency flash, but every time I boot I just get the tricolour bootloader screen (IPL 1.00, SPL 1.01.0064) and can't get any further. Any ideas please? I have tried using mtty to load wm5.bin but get the error "MTTYDownloadImageNot allow operation!"
I have also tried re-doing the "format BINFS" and doing the above again but still no joy.
Any ideas would be much appreciated!
Click to expand...
Click to collapse
i also got that problem but i reinstalled the patched RUU again and my phone now boot but i have not been able to go back to the 2003 as i insalled WM5 but still cant format the BINFS
If already have patcher the bootloader with the guide to upgrade to wm 6.0 can I ignore to do it again? I mean flash bootloader again ?
well i reverse engineered some things for the shift (though this was done without a device, just pure disassembly of some drivers and programs), and first results are here - i wrote the initial version a program that can enter bootloader mode, which is initiated from vista without WM running at all, and hence can hard reset your WM on the shift if something goes wrong even if WM doesn't boot anymore.
this is obviously just a first version, it will look a lot nicer later, and will be a lot more user friendly too. but for that a lot more testing will be needed which is very hard without the device itself and also development is slowed down without access to a test device -- more donations for shift project will help us get the device a lot faster.
for now it's a command line app so you need to run cmd.exe on vista first, then launch it from there. and then when you entered bootloader mode you can run mtty for vista (download below), then issue "task 28" (without the quotes) from mtty to hard reset.
please do not ever try issuing task 2a! never! it will brick the device!
so anyway..
download: http://hpcmonex.net/ECShift.exe
you can type ecshift.exe -help to get command info
but the ones that are actually useful commands:
ecshift.exe -bl enters bootloader
ecshift.exe -mode0 exits bootloader (do a soft reset to get back to WM after this command). no battery removal needed!
ecshift.exe -reset soft reset
ecshift.exe -gm status info, mode 0: normal mode, mode 1: bootloader
USAGE:
to enter bootloader mode you need to:
1) run cmd.exe on vista on the shift while the snapvue side is not powered down (doesn't matter if it can't boot to WM).
2) run this command: ECShift.exe -bl
PLEASE give administrator rights to the program if needed!
3) wait until it says it successfully entered bootloader (if you get an error message please let me know)
4) disable WMDC on your shift!!! means under wmdc you must tell it to not allow usb connections!
5) download a special version of mtty for vista from http://hpcmonex.net/mtty_0513_Test.exe and run it
6) select USB in it and you should be in bootloader OK
so if you want to hard reset then do step 7:
7) issue this command: task 28
that's it, you can reboot after exiting bootloader (command: ecshift.exe -mode0, then -reset, or you can also remove battery), this should hard reset your device.
two things:
if mtty can't see usb then remove battery, reboot the snapvue and try the app again.
and bootloader is not tricolour screen, it is black.
and AGAIN, please do not ever try issuing task 2a! never! it will brick the device!
sorry for the many steps. that's so until the app is made more *userfriendly*, that needs more testing and development but will be done and this thread will then be updated with that version.
now, what is left is finish SSPL (important goal is making it userfriendly) to fully unlock the shift to enable you to flash custom roms on the device with
SD, GPS, etc drivers and a lot of apps etcetc.
the work has started on all these, but again, development and testing is slow now without a device.
thanks for your interest, and donations too for donations, see: http://forum.xda-developers.com/showthread.php?t=376111
EDIT: instructions and download link have been updated. see also update in other posts in the thread too.
Thanxs Comonex will try out latter and post my results. Once again thanks for this!
faisal.husain said:
Thanxs Comonex will try out latter and post my results. Once again thanks for this!
Click to expand...
Click to collapse
thanks! let me know if it worked... as i said only the second app posted was tested.
Nice work... !
Szép munka... !
program has been tested, seems to enter bootloader fine
so use this if you want to enter bootloader or just need hard reset with WM not booting.
PChaos said:
Nice work... !
Szép munka... !
Click to expand...
Click to collapse
hehe thanks and.. szívesen
well done It.!
Yes!!!!! it work!!!
Very tanks!!!
Great work!
It is great to know progress is being made (even without a test device!).
It is great to know that indeed there is a way to hard reset WM side if needed
Keep up the great work!
And people, if you didn't yet, plz donate to the shift project. Even if it is just a tiny amount. It would help speed things up.
(although I think things are going fast allready )
grtz,
Pfeffa-rah
Pfeffa-rah said:
Great work!
It is great to know progress is being made (even without a test device!).
It is great to know that indeed there is a way to hard reset WM side if needed
Keep up the great work!
And people, if you didn't yet, plz donate to the shift project. Even if it is just a tiny amount. It would help speed things up.
(although I think things are going fast allready )
grtz,
Pfeffa-rah
Click to expand...
Click to collapse
Thanks and main project thread updated with latest donations. You're right, the team is doing everything possible to move forward.
It works on the CDMA version!
The bootloader screen *is* however tricolor and displays:
CLIO200
SLP-0.14.0000
at the top of the screen.
I didn't even have to reactivate the Sprint module (you don't have to if you use Clear Storage either but you do if you use the HTC ## command to wipe the device).
It works on the CDMA version too!
The bootloader screen *is* however tricolor and displays:
CLIO200
SLP-0.14.0000
at the top of the screen.
I didn't even have to reactivate the Sprint module (you don't have to if you use Clear Storage either but you do if you use the HTC ## command to wipe the device).
pdagal said:
It works on the CDMA version too!
The bootloader screen *is* however tricolor and displays:
CLIO200
SLP-0.14.0000
at the top of the screen.
I didn't even have to reactivate the Sprint module (you don't have to if you use Clear Storage either but you do if you use the HTC ## command to wipe the device).
Click to expand...
Click to collapse
wow it has tricolour screen. i'm going to reply to your email, hope we can get this bootloader dumped, i'm very interested
pdagal said:
It works on the CDMA version too!
The bootloader screen *is* however tricolor and displays:
CLIO200
SLP-0.14.0000
at the top of the screen.
I didn't even have to reactivate the Sprint module (you don't have to if you use Clear Storage either but you do if you use the HTC ## command to wipe the device).
Click to expand...
Click to collapse
Strange. THe normal Shift version doesn't have the tricolor in bootloader mode
great job babe keep it up
anyone got old SPL that does show tricolour? i'm still interested in getting that version.
[size=+2]UPDATE....[/size]
I improved on the programs and merged them in one
there will be a GUI very soon, when functionally it gets out of beta status.
so download: http://hpcmonex.net/ECShift.exe
you can type ecshift.exe -help to get command info
but the ones that are actually useful commands:
ecshift.exe -bl enters bootloader
ecshift.exe -mode0 exits bootloader (do a soft reset to get back to WM after this command). no battery removal needed!
ecshift.exe -reset soft reset
ecshift.exe -gm status info, mode 0: normal mode, mode 1: bootloader
and a [size=+2]REQUEST....[/size]
if anyone tries the bootloader mode, then please try this command in bootloader in mtty:
info 7
and tell me if in the command reply the SPL is older than version 1.00
especially if 0.14! (that one will also have tricolour screen.)
cmonex said:
[size=+2]UPDATE....[/size]
I improved on the programs and merged them in one
there will be a GUI very soon, when functionally it gets out of beta status.
so download: http://hpcmonex.net/ECShift.exe
you can type ecshift.exe -help to get command info
but the ones that are actually useful commands:
ecshift.exe -bl enters bootloader
ecshift.exe -mode0 exits bootloader (do a soft reset to get back to WM after this command). no battery removal needed!
ecshift.exe -reset soft reset
ecshift.exe -gm status info, mode 0: normal mode, mode 1: bootloader
and a [size=+2]REQUEST....[/size]
if anyone tries the bootloader mode, then please try this command in bootloader in mtty:
info 7
and tell me if in the command reply the SPL is older than version 1.00
especially if 0.14! (that one will also have tricolour screen.)
Click to expand...
Click to collapse
sorry but i'm not expert in this, where i must put ECShift.exe, and insert the commands that you listed before?
pitt1983 said:
sorry but i'm not expert in this, where i must put ECShift.exe, and insert the commands that you listed before?
Click to expand...
Click to collapse
just put it anywhere, and then run cmd.exe, go to the folder where ecshift.exe is
then type the command
cmonex said:
just put it anywhere, and then run cmd.exe, go to the folder where ecshift.exe is
then type the command
Click to expand...
Click to collapse
in vista side right?
pitt1983 said:
in vista side right?
Click to expand...
Click to collapse
yes (I have to go to 10 char)
I had my 8125 flash a bad rom and was stuck on splash screen.
fixed it with mtty1.42
connect in bootloader mode with usb
choose usb connection not com1, or com2
you will get a white screen press enter
then you see cmd>
type format will show you what you can format
you want to format the os part starts with a b cant remember exactly
once its formated flash a rom and you should be good to go if you have any questions just let me know.
The final part!
insanavaca said:
I had my 8125 flash a bad rom and was stuck on splash screen.
fixed it with mtty1.42
connect in bootloader mode with usb
choose usb connection not com1, or com2
you will get a white screen press enter
then you see cmd>
type format will show you what you can format
you want to format the os part starts with a b cant remember exactly
once its formated flash a rom and you should be good to go if you have any questions just let me know.
Click to expand...
Click to collapse
You've got the final part of my research...
NICE MEN!!! thanks a lot please post this in upgrade and windows mobile 6 forum please! thanks a lot... the time i did it it shows USB then it wont...
whe shows me USB i can enter task 28 55aa and TA DAAA!!! it works...
do you remember if i need to choose A or B???????
Hi everyone...
I've tried to cid unlock my artemis but I wasn't able to do it...
any clues?
When I trie to install a rom (oficial Portuguese 3.14) it gives me Invalid vendor ID...
What could I been doing wrong?
Thanks in advance!
i had trouble cid unlocking my artemis, i dont know what i did but i done it, this is what i did tho.lol
download Uspl - mine came with these cab files so i installed them on the phone.
''Cert_SPCS''
''EnableRapi''
link to pc and get active sync connection.
run ''start_uspl'' (on pc which opens a dos screen)
phone screen will go off into white or black screen.
(should see a penguin)
after that ''ROMUpdateUtility'' will automaticy start.
*cant remember if you need soft reset or not - think you do so active sync is enabled again, try with and without soft reset!
click through untill it starts to update, your phone will go into bootloader mode showing a usb connection. it will automaticly go into a gray screen with a loading bar.
SPL;1.11.0000 should now be displayed at boot
if this does not work try hard reset on phone and reinstall active sync on pc.
use uspl cmon to flash any rom..
spl 1.11.cmon