Database Users

Tips on not losing minisd card

any suggestions on securely keeping the minisd card in place. i am on my 3rd card in 4 weeks and its getting kind of annoying at this point. the first time i lost the card was when i dropped the mda and didnt realize the card was missing until the following morning. i lost the 2nd card mysteriously during the night. any suggestions would be helpful, thanks.

Keep the MDA in its case? I haven't lost my MiniSD card and i've had my phone for about 4 weeks, but i keep it in the holster 80% of the time and almost always when i'm not home or it isn't in my hand directly...
How are you using your phone? How are you storing it? Etc.?

it usually in my holster, i just get clumsy at times...pretty sure that i lose the cards when i just drop my phone and forget to check if the card is still in... i was thinking of putting a layer of tape over it...
maybe i should just be more careful

nikegeo said:
maybe i should just be more careful
Click to expand...
Click to collapse
....maybe? Tape also sounds like a good idea.

Tape may be tacky, but it sure beats purchasing a new card!!
I lost the fake mini sd card that came with my wizard, but have yet to loose my 1 gig card. I think I would cry...

I have my phone now since June or so and still haven't lost my card - I'd be devastated it it happened, I just realised I need to do a backup of that card !!!
Clear Tape sounds good to me.

double post, sorry.

Perhaps your locking mechanism for the minisd card is (semi)broken? You mentioned it had fallen the first time...?
I still have to push the card in pretty hard with my fingernail to get it to pop out, so for your cards to fall out so easily makes you think the minisd card(s) might not lock in correctly?

I have to say I've never had an issue with my card falling out of the slot. It locks in pretty firmly. I suspect a defective slot. Or perhaps you're not pushing it in quite far enough to enable to lock?

nikegeo said:
any suggestions on securely keeping the minisd card in place. i am on my 3rd card in 4 weeks and its getting kind of annoying at this point. the first time i lost the card was when i dropped the mda and didnt realize the card was missing until the following morning. i lost the 2nd card mysteriously during the night. any suggestions would be helpful, thanks.
Click to expand...
Click to collapse
Dude after I read this my SD some how came out at a friends house and I didnt know until I tried to run some of my apps of my card. Some skater tape works well and it looks much cooler if you run it all around and cut out the spots for the various items.

Install NotifyMe.. it alerts when your MiniSD pops -out or deliberately removed from the phone.
Just execute the EXE anywhere on the phone and it automatically puts a shortcut on Start - Settings - Personal and configure from there..

peraltah said:
Dude after I read this my SD some how came out at a friends house and I didnt know until I tried to run some of my apps of my card. Some skater tape works well and it looks much cooler if you run it all around and cut out the spots for the various items.
Click to expand...
Click to collapse
That's really an... interesting thought. Anyone have any luck with duct tape?

Mesh said:
Perhaps your locking mechanism for the minisd card is (semi)broken? You mentioned it had fallen the first time...?
I still have to push the card in pretty hard with my fingernail to get it to pop out, so for your cards to fall out so easily makes you think the minisd card(s) might not lock in correctly?
Click to expand...
Click to collapse
It's also got something to do with the card itself. I have a 2 GB Apacer card which has never popped out, and even after I eject it I have to pull it out by hand, it won't drop out if I shake the phone or turn it upside down.
But I also have an older 512 or 1MB card (don't remember the brand name and can't find it any more). If I just push it in to eject it, it almost flies out of the slot. If I eject it and then hold the phone upside down it just drops out.
So I guess my tip is: If you've lost one, dont buy the same brand/size again without trying it in your phone

thanks for that app and advice guys

da_mayhem - thanks for that program - just tested it out and now at least when im drunk and lose the card ill know to look for it - going into my essential apps folder - thanks again

nikegeo said:
da_mayhem - thanks for that program - just tested it out and now at least when im drunk and lose the card ill know to look for it - going into my essential apps folder - thanks again
Click to expand...
Click to collapse
No problem mate..now i'm thinking about how to make my mini sd glow in the dark lol

this may not be wat ur asking, but i always forget my mini sd in my mem card reader >.<

Micro SD not recognised on insertion!!!

Hi All,
Wonder if this is common or should I return the unit now. Had my Dopod 838 Pro for a week now. Great phone/PDA but since new, it does not always recognise a Micro SD card at first insertion. Tried 1x512 Sandisk and 2x1gb Ultra II cards with same issue. Phone has latest ROM from factory, 1.03.707.4. The insertion seems "clunky" too, that is, it doesn't go in smoothly like regular SD and Mini SD devices I have got.
What I have noticed is that if I only insert just enough to lock the card in it seems okay, but if I push it firmly home, it is more likely to remain unrecognised.
In every case, once recognised, it runs, saves, reads from the card flawlessly so it does seem like this is a hardware issue. But if all the Hermes phones are similar, it may be just one of those characteristics of the phone and nothing too much to worry about. Just like to know so I can relax or act as the case may be.
Thanks for any feedback guys...
John

Yes, I have found a similar issue. If I remove and re-insert the card a few times it eventually gets noticed.
It's the only glitch I have had on the device after 3 flawless months

MarkD said:
Yes, I have found a similar issue. If I remove and re-insert the card a few times it eventually gets noticed.
It's the only glitch I have had on the device after 3 flawless months
Click to expand...
Click to collapse
Quite a few seem to take a few goes before recognised but usually seem to work fine once recognised.
Might be a bit concerned about jpfe8851's clunky slot and if it seems to go past the normal stopping point - Have not seen reports about this and mine does not do this.
Mike

I've noticed that it works everytime for me if I insert the card with the device turned off.
Martin

If you use your camera application to save the pictures on a memorycard, try to run the camera after inserting the card if it doesn't detect it. The camera app. then informs you that there's a new memcard inserted and do you wanna use it to save the files on.
Not so much of an hasle, considering how often you really remove/insert memory cards and the hermes has the camera button just opposite to card slot. And the application doesn't stay on the process list if you close it from the X (cross on upper right corner). The OK button doesn't completely close the application.

Inc said:
I've noticed that it works everytime for me if I insert the card with the device turned off.
Martin
Click to expand...
Click to collapse
Same with me I turn it off to remove and then turn it off to insert and it will pick up the card

y2whisper said:
Same with me I turn it off to remove and then turn it off to insert and it will pick up the card
Click to expand...
Click to collapse
This sounds like good practice and I'm sure for most folks this works. I think though there some people that struggle to get Hermes to recognise the card even when inserting it when off. Generally it does recognise it in the end but there could be a few reasons for these issues (formatting, fragmentation, poor physical contact and so on).
I think your advice is good though and should become routine whenever the card is removed/inserted.
Mike

I've used a 1GB PQI, a 2GB normal Sandisk, and a 2GB Sandisk Ultra, and all have worked fine. Except one of the 2GB doesn't like my card reader

i found formatting the card help. Originally it would only be detected if the phone was turned off.
Unfortunately I didn't have a card reader, so used an adapter to format it in my digital camera and have no idea how it formatted it. But it now works everytime without fail!

Thanks Guys...
Sounds like this is fairly common. I've found even since I posted the original question, that provided I just push the card until it clicks, it starts up every time. With my old Axim x50v and Atom, I had to really push the SD cards as far as possible to engage the lock whereas the Dopod clicks just after the edge of the card is past flush. Gently does it seems the rule.
Mike, I appreciate your concern but the clunkiness I think is more related to the card design, having the bumps along one side, than the slot. Also, these things are all rated as hot swappable, so we should all not have to turn off just to change a card. I don't change cards that often, but when I travel, I swap cards a bit as I take a couple cards with music on to listen to while flying.
For all with the issue, I suggest you do as I said in the first paragraph as that seems to be the clue, just press the card until you feel it engage the lock and see what happens.
Thanks all for your feedback. I'll carry on without a visit to service as the phone is terrific and the keyboard (my reason to replace the Atom) is superb.
Best regards,
John

*Solution*
I've also had the same problem, but I think I've figured it out and it's a hardware issue.
If you don't pay attention to how you put the card in, it will go in "crooked". The problem is that the little notch on the side of the microSD won't activate the switch inside the phone that tells it that "the card is in".
The solution is to watch very closely how the card goes in. If you make sure that the side of the microSD card with the notch, goes in straight and flush with the side of the slot, it will recognize it every time.

i've done all the suggestions given on this topic but i still can't get my JasJam, which is about 13hours old, to recognice my microSD card. I've tried a 512mb and a 1gb and no luck... i'm leaving tomorrow and i'm worried if the service center will want to repair it rather than exchange it.

hi fone_fanatic,
if its a fault with the jasjam, you will receive a replacement if its under 30 days old. but the replacement procedure sucks.
Are you in Australia and a Telstra customer? If so, telstra calls imate support to obtain a service reference number, then they will send your pda to mobile phone solutions (MPS) in QLD, they will inspect it and then return a new jasjam to your retail outlet. once the retail outlet receives it they will give you a call to come and collect it.
the warranty is Imate, not telstra, so once it leaves their stores, imate are the ones who do the replacement through Mobile Phone Solutions.
Turn around time, 1 week for my replacement to be couriered to QLD from Melbourne, 5 days turn around time from MPS, 4 days for the new replacement to be couriered back to melbourne, 1 day for me to pick it up. so around 3 weeks.
Now, MPS is closed from Dec 22 to Jan 3 and they are out of JASJAMS, they are awaiting more from imate for warranty replacements (my friend is wating for his replacement) so turn around time could be longer.
life sucks sometimes......

Thanks for that info Jasjamming. I'm in saudi arabia visiting family and friends for the holidays, and the process you just described soounds very similar to the one that was described to me today. BUT... turns out the device is fine, the cards i tried were both Nokia MicroSD cards that came with nokia phones and for some reason the jasjam won't read them. So i bought a 1gig Sandisk and it works fine!

Im having the same issue with my Hermes and a Sandisk 2gb card. It worked fine for a few weeks, but now wont detect at all. Interestingly the screen comes on when the card is inserted or removed - I'll test the card in a reader to see what shows...

A soft reset always seems to work for me

aprmike said:
Im having the same issue with my Hermes and a Sandisk 2gb card. It worked fine for a few weeks, but now wont detect at all. Interestingly the screen comes on when the card is inserted or removed - I'll test the card in a reader to see what shows...
Click to expand...
Click to collapse
There's a thread here http://forum.xda-developers.com/showthread.php?t=294324 which gives some fixes to this problem. The thread is a bit long so it may be best to read from the end backwards.
Also, I believe this problem has been taken care of in the cooked WM6 roms. My SD card hasn't disappeared since upgrading to WM6, but did all the time when with Vodafones UK rom.

broken microSD card?
I have a Sandisk 2GB microSD card, that after a few days stopped working. Whenever I insert it, the device hangs completely. It doesn't matter whether I had turned off the device before inserting. The device stays unresponsive when I eject the card again, I always have to do a soft reset to bring the device back to live. I tried to insert the card carefully (as someone here mentioned the issue with the little notch), but it doesn't make any difference. The card is never recognized, not even after a soft reset. This is obviously very frustrating, as I had just installed a couple of useful apps on the card.
Do I need a new card or is there anything else I could try? ( I do not have a card reader....)
ROM: 1.23.78.3
ROM date: 08/01/06
Radio: 1.06.00.00

it must be the sandisk 2GB microSD cards as i have one to worked great for a week, then stopped working....i formated using the pc and now it is recognized as a 1 GB card, in both phone and pc..

QuachMD said:
I've also had the same problem, but I think I've figured it out and it's a hardware issue.
If you don't pay attention to how you put the card in, it will go in "crooked". The problem is that the little notch on the side of the microSD won't activate the switch inside the phone that tells it that "the card is in".
The solution is to watch very closely how the card goes in. If you make sure that the side of the microSD card with the notch, goes in straight and flush with the side of the slot, it will recognize it every time.
Click to expand...
Click to collapse
Quoted for truth.

Guys, I THINK I solved the SD card issue...!

Guys,
Don't flame me... I haven't fully tested my theory, but so far it's working well!
As you know, MANY of us have issues with the card not being recognized sometimes; the device hangs; the camera doesn't capture images, etc.
Well, today I was trying to take some pictures facing downwards (of a leak in my car door), and I would just get a black image almost every single time.
I would then do a test and snap a picture of my garage, and it worked.
Back to the door, it didn't work.
Etc.
I wasn't sure if there wasn't enough lighting or what.
HOWEVER.....
I then realized that everytime the unit was pointing down, THAT is when it didn't work!
I examined where the contacts are on the card (top), and sure enough, it MAY be that by the force of gravity, one or two contacts are losing contact.
So I tested my theory.
I stuck my thumbnail (the REAL one, not a mini image ) under the card, and pressed it up.
EVERY single picture worked PERFECTLY.
No freezing! No black! No issues!
So, I took a small peice of paper, and slid it under the card, like a shim. (It was actually a piece of an envelope, so it's a big thicker.
Gentlemen... Since I put that paper underneath the card, my 8525 has worked flawlessly.
I just took 20 pictures, stored on the SD card, and not one issue!
And this is a 2GB Sandisk, by the way.
I will do more tests, but I am really feeling confident that this may solve some of our problems.
(I hope this is not a "welcome to last week" thread! I have seen LOTS of threads regarding the camera, freezes, and SD issue.. but I never read anything about solving problems with a piece of paper!)
Thoughts???

Hi Michael_514,
While I appreciate your efforts here, the one thing that seems to have solved ALL of my SD Card issues was upgrading to WM6. Nothing to do with gravity nor Elfen registry edits ... just a new OS.
While I think your tack, dealing with gravity and the directional orientation of the device is interesting, I think the heart of the problem exists in the drivers for the SD Cards, which were corrected (or at least ameliorateed) in the newer OS builds.
All the same, I am interested in your final results, so please continue this post.
All the best,
-pvs

Don't forget guys, maybe you are both right! We should not assume that everyone has the same problem - though the symptoms may be the same. Actually, when reading the many posts on this issue, I AM convinced there is in some cases a poor contacts issue that will afect the camera and other software/files on the SD card. I am also convinced there is in other cases a driver/software issue that may well be improved with WM6.
Always be cautious, yet open minded about claims from folks to have solved an issue. It may be for some but not all, and a different solution may exist for others.
Mike

Point taken, Mike. Thanks for that!

Just tried it. I will keep you informed tomorrow.

Thanks for the responses, PVS & Mike.
Mike -- Love your 'have an open mind' role! I guess that's why they call you a Moderator!
I would agree with Mike... both answers could be correct.
I am convinced that 90% of our Hermes woes ARE SD Card related.
I feel that because I had these units for 7 straight days, in use almost all day, with not one crash or hang...
..and then on day seven, I did a SD Card copy/paste, to switch cards with my dad's unit, and from that day on, freeze.. freeze.. freeze... Sometimes the unit is great for three days, sometimes, 3 reboots in one hour are required....
...Same thing happened when I reinstalled the firmware....
...that I just 'knew' that the freezes and hangs were DEFINITELY related to my swapping of the cards. Especially since I installed no weird apps.
Dirty contacts; bad connection; bad card controllers; I KNEW that my woes were not 'OS-related', 'sbd Pocket-plus-related', nor firmware related... Especially since I did three reinstalls of the firmware.
PVS - I totally agree with you. Perhaps WM6 has some better error checking, or a better algorythm for handing missing bits over the card bus.
I know a little about how computers and electronics handle this. It's why you can make a scratch in a CD, and it still plays. Check bits / error correcting / over-sampling / etc. etc.
I agree that a more advanced OS, like WM6, can better "handle" missing bits.
..but I am trying to get to the root of the problem.
I just went to the bathroom and took about 30 photos while sitting there . ALL 30 worked! No black photos. No "New SD Card Inserted" message. No freezing. 30 on 30. I am thrilled so far!
After spending three weeks racking my brains out, dealing with the problems, I am starting to truly feel like I may be on the right track.
Let's keep our minds open... Let's remember how many 8525 issues do point to the cards. Let's keep in mind that half the people love their Sandisks, and half the people love their Kingstons.
A new OS may solve people's problems, as could a piece of paper jammed in there to make the contacts tighter.
I spent $720 on two of these units, and let me tell you.. I MISS MY 8125!
I am as eager to solve this as anyone. I use this machine for business. It's not just a hobby for me.
Maybe we are on the right track...!
Let's see what others say...!
I will keep everyone posted.
I do have to laugh at my make-shift solution, though! There is something funny about staring at my unit, with a little piece of envelope visible under the SD card. Talk about a low-tech solution to a high-tech problem!
M

Michael_514, I love your theory. I hope it's that easy a solution for some of us if not all.
It seems from reports that Sandisk cards have this problem more often?
If owners could report their card's thickness using a micrometer, this might help confirm if an electrical contact issue is more likely?
My Corsair 1Gb card is 0.70mm thick, just behind the electrical contacts.
I've had issues with the card not being detected both with WM5 and now WM6. One time was fixed by wiping the contacts clean, but other times ejecting & reinserting the card make no difference. I've ignored the problem and many hours later the card would be visible again.
When I read your post, I straight away folded up some paper and pushed it in above the card, on the same side as the contacts - the memory card was still accessable within the phone, so I'm thinking my issue isn't a physical one.
Next time the card vanishes from explorer, I'll insert some paper to shim it towards the contacts and see if it helps.
Has anyone pulled apart their phone? I'm wondering if perhaps there's some type of pressure applied to the back of the card forcing it to contact electrically? Maybe if this is a mechanical device it is getting stuck?
My old phone's SD card slot broke when I dropped it once and it no longer ejected cards normally, but still worked perfectly.
Cheers! Oggy.

Hi there!
I just wanted to confirm where I put the paper.
I put it UNDER the card, effectively 'pushing the contacts up'.
That is where I stuck my thumbnail when I could not take a successful picture of my car door.
When I said to myself, "Why do all photos of the sky work, but not photos of the ground??", that is when I realized that I wanted to "push it up".
And in terms of the:
This firmware vs. that firmware...
Kingston vs. Sandisk...
WM5 vs. WM6...
Made in Taiwan vs. Japan...
Those are NOT the answers.
Too many people in too many threads have proven that.
I am not saying my method is correct... I will need a week of testing... But I know people DID have problems with WM6. People DID have problems with Kingston. People DID have problems with 512MB.
I started another Kingston vs. Sandisk thread, and reading those responses has shown me that it ain't the answer.
And as Ogier says, "I've had issues with the card not being detected both with WM5 and now WM6."
So, that also isn't the answer.
Let's all keep our fingers crossed, because I HATE rebooting this unit!
But to confirm, I put the paper underneath to 'force up' the contacts....!

@ Michael_514
Just another thought. There is also a difference between photos of the sky and photos pointing down and that is the light level. I know you are testing the idea about the contacts and angle of the phone, but to confirm it's nothing to do with the light level sensor/software you might need to test by taking high light level pics (pointing downward at a lamp say), just to rule out any light level sensor issue. I have noticed that the camera seems to incrementally adjust light level but in general it will be at a different setting pointing up as opposed to down.
As I say just a thought and something to rule out or in.
Mike

I don't know if this is disappointing but I have tested this method during the weekend and it does not work. I have definitely inserted the shim under the card so to push the contacts up. After some time my card is partially lost meaning some programs will not run. This morning I'm in the office and I have replaced the shim to sit just under the contacts and not under the entire card. I will keep you posted although I don't trust it will work.

SD troubles
hi guys,
ive been looking at these SD card related threads in the past and was thankful that my hermes seemed fine...
UNTIL
the speaker connection popped out and i opened the phone to connect it back up. everything when fine and the speaker is working but the sd card refuses too show up. now ive tried putting paper under and above the SD card and ive also changed my ROM to two different WM6 flavours. im sure all the connectors are plugged in but i really need my SD card to be shown.
Anybody experience something similar or have and idea's on how to get it working again. it only stopped working after i removed the back panel, connected the speaker back up and then closed it.
thank you,
Drooch

drooch said:
hi guys,
ive been looking at these SD card related threads in the past and was thankful that my hermes seemed fine...
UNTIL
the speaker connection popped out and i opened the phone to connect it back up. everything when fine and the speaker is working but the sd card refuses too show up. now ive tried putting paper under and above the SD card and ive also changed my ROM to two different WM6 flavours. im sure all the connectors are plugged in but i really need my SD card to be shown.
Anybody experience something similar or have and idea's on how to get it working again. it only stopped working after i removed the back panel, connected the speaker back up and then closed it.
thank you,
Drooch
Click to expand...
Click to collapse
Not much to suggest other than open up again - double check connections and hard reset if it still does not work.
Mike

ive checked the connections and they seem fine, i really cant put my finger on what has changed from me opening it and then closing it. the only difference is that there is no void sticker anymore! is there anyway to see if it still see's the sd card slot or if the OS diesnt even think its there.
Ive tried HR and ROM changes, so its something hardware wise.
Drooch

drooch said:
ive checked the connections and they seem fine, i really cant put my finger on what has changed from me opening it and then closing it. the only difference is that there is no void sticker anymore! is there anyway to see if it still see's the sd card slot or if the OS diesnt even think its there.
Ive tried HR and ROM changes, so its something hardware wise.
Drooch
Click to expand...
Click to collapse
Maybe you said, but does the card work ok on a PC card reader? Just wondering if the card formatting is corrupted?
Mike

Again, after rechecking this method, putting two pieces of paper just under the contacts area of the card I still get the "once every 6 hours" normal card failure. I just remove the card, wait 5 seconds and insert it again. That's it for me.

Hi All!
Two interesting discoveries..!
First of all, so far, so good.
I did not have to reboot my once since Friday. Today is Monday, and not one single freeze. Normally, I like to reboot every few days just to 'clean it up', but I am going to leave it until it freezes.
Friday evening, Saturday, Sunday, this morning...
Not one system hang.
However, I did take a few pictures that came out black. That's the bad news.
I have not looked at other threads yet, but as Mike alluded to, above, there IS something wrong with the light sensor.
Remember how I said I had problems photographing my leaky car door, but then other pics were fine?
Well, yesterday my father said to me that he took a few pictures of items in his showroom, and some items would NOT be able to be photographed!!! He said that he has some gift items with SPARKLES, and he could successfully capture photos of items without sparkles, but when she shot the sparkly items, he saw black.
Then I thought about the pictures I was taking, the pictures WERE of dripping water from my car door.
I think that a unit that hangs, or an SD card that's not recognized, MAY be a totally separate issue than black pictures.
But that still doesn't explain how I was able to take all sorts of photos when my thumbnail pressed on the SD card.
In any case, like I said, I have been extremely successful with 'no black' pictures this weekend, and have not rebooted my device since Friday. This is a miracle for me.
I just removed and inserted a clean shim.
If I could get another three days without a reboot, I will be jumping for joy!

My unit just hung!
I had disconnected the unit from the Activesync USB cable.
Went upstairs.
Came back to find the unit on (Backlight on) and the unit was very hot, with the battery being sucked down 1/2.
I had set an Alarm for 1:00pm, and it's now 2:10pm. It started playing a second or two of the Alarm sound just now. And that was it. Very hot to the touch.
But I am happy that this is my first re-boot since Friday.
These hangs/black photos/hot battery drains may all be different issues, but I am still definitely leaving my shim inside the card. No reboot since Friday is a big improvement for this unit!

Good day
I recently upgraded my TyTn from WM5 to WM6. Since upgrade 1GB and 2GB Apacer micro SD's that worked fine are not recognised by the phone.
Am I missing any setting in WM6? Can someone please help as I need to access info on the cards ASAP.
Thank you

Just got my new PQ1 2G card and replaced my old 2G Sandisk. My first impression is speed - much better with the PQ1. Also the general feeling is that it fails less or not at all. I have to work with it for the next 72 hours to give you my statistics comparing it to the Sandisk.
I'll keep you posted.

NO. This feels the same as my old Sandisk 2G memory. Every 4-5 hours my SD card stops responding. Mind you in the PQ1 case I can still see the card with my Explorer and even see the directory structure and the files. They just can't run. The messege I get is the progrmam is not found.

2Gb SanDisk stuck and unstuck, happy end

Just for others to know. I got 2Gb MicroSD yesterday and put it in. The one I got a week ago was DOA (both original, bought in Costco). New one worked fine in my laptop but got stuck in Mogul's slot, unreadable. I panicked first but then started thinking. I couldn't pull it out, it was not compressing in the slot either. I got thin knife, pushed it "down" (toward the back of the phone) a bit with a little pressure and got it loose this way (it kinda "popped" and then I could push it in to remove). It seems that a little tab that helps you to get card out of the adapter may get stuck in Mogul's slot when you push it, even if card is put in with utmost care. Just be careful and don't panick, play with it and it will come out.

I had the same problem with my 4gb SDHC card. Couldn't get it out using every method imaginable. For some weird reason though, after a few days of use and leaving it alone, the card reader just decided to start letting the card pop out normally.

Does your shift sometimes say SD card is read only?

This is the second time and a different card that this has happened with me. I've tried ruu and that doesn't help. I thought maybe there was a file on it that the phone didn't like so I backed up the card and let the phone format it. Problem went away for awhile. I got a faster card and now its doing it again. I had a similar but more destructive times of this happening with the evo. It would corrupt the card and I lost everything on it. What I ended up doing was put a piece of paper the size of the card on top of the card. This was to make the battery hold down the card more firmly. I suspected the crappy mechanism htc used on both phones is at fault. The card would wiggle around when it was seated in the slot and the lock bar down. I don't know if this is the case again with the shift but I did it again with this card. Hopefully that does the trick. I would hate to take the phone back.

herbthehammer said:
This is the second time and a different card that this has happened with me. I've tried ruu and that doesn't help. I thought maybe there was a file on it that the phone didn't like so I backed up the card and let the phone format it. Problem went away for awhile. I got a faster card and now its doing it again. I had a similar but more destructive times of this happening with the evo. It would corrupt the card and I lost everything on it. What I ended up doing was put a piece of paper the size of the card on top of the card. This was to make the battery hold down the card more firmly. I suspected the crappy mechanism htc used on both phones is at fault. The card would wiggle around when it was seated in the slot and the lock bar down. I don't know if this is the case again with the shift but I did it again with this card. Hopefully that does the trick. I would hate to take the phone back.
Click to expand...
Click to collapse
no problems here (yet), but I hope this doesn't happen.

This has happened to me on all my android phones. My hero, optimus s, epic and now the shift. Usually just messing with it will fix the issue no problem. Pull the card reboot etc. Worse come to worse back your card up and reformat. That fixed it for me before.

fifedogg said:
This has happened to me on all my android phones. My hero, optimus s, epic and now the shift. Usually just messing with it will fix the issue no problem. Pull the card reboot etc. Worse come to worse back your card up and reformat. That fixed it for me before.
Click to expand...
Click to collapse
Have any theories on why this happens?

I haven't had this problem but my Moment would occasionally tell me the SD card was damaged when I knew it wasn't. Figured out that just plugging it into the PC and having Windows scan the drive for errors would fix the problem. Maybe it might work for this too...?

I'm guessing that the SD card doesn't sit in the card slot and recessed area very well. Sometimes, over time, the card might be jostled by handling of the phone like if it gets bumped. The contacts lose a solid connection with the other half of the contacts inside the phone and an error happens. In some cases with some phones, I speculate when a card shift happens during a write cycle to it, the file allocation table doesn't get updated correctly, thus temporarily corrupting the card. Seems as if a format fixes it sometimes. That's my guess. When I put a piece of thick paper, less than a millimeter in thickness, on top of the card, and the paper is the same shape of the card, and the weight of the battery on it helps keep the card from having the tendency to move around in the card socket. The errors don't seem to happen again for me.
Why does this crap happen to me? The spring loaded card sockets on phones, I've never had this problem. They seem to hold the card in place very well. It's probably a cost issue because a plastic bar to hold the card down is cheaper than the metal spring loaded locking card mechanism.

It happened again. It seemed to happen when I tried to open a file. It seems like it only happened when I messed with the file. I deleted it and so far so good. It seems weird that a file would make the card go into read only mode.

I had it happen once. It was when I was disconnecting from the computer.
I always eject from computer, then select charge only before disconnecting. I read that on an EVO forum
Sent from my PG06100 using XDA App

I managed to have this happen on my Hero with an 8GB class 2 card. I returned it and upgraded to a class 6. Also I made sure to always properly eject the USB in Windows after that. Not a problem since. Knock on wood.
Sent from my HTC Evo Shift 4G

it happened rarely on my Moment but not on the Evo Shift . usually a reboot cleared this problem for my phone

jesusice said:
I haven't had this problem but my Moment would occasionally tell me the SD card was damaged when I knew it wasn't. Figured out that just plugging it into the PC and having Windows scan the drive for errors would fix the problem. Maybe it might work for this too...?
Click to expand...
Click to collapse
Yup, this works great

It's happened to me before, but on my Hero. Haven't had it happen on my Evo Shift yet.
Only thing that's happened is one time I had my phone set as a disk drive when connected to my PC. A friend of mine called me and it couldn't read the ringtone from the SD card, and I got an error regarding DRM not being installed. Once I disconnected the phone from the PC, everything worked just fine.