Related
I just got my new Wizard ([email protected]).
As I used Magician ([email protected]) before, there is a smart dial option for the phone.
I can make a call with "ONE Finger" but in my Wizard..I have to scroll all contacts to make a call.
Is Smart Dial option available in others e.g. Qtek, i-Mate...etc?
Can please help to extract this for me???
Many thanks
If you go in the ftp under uploads\kjam you can find the extended rom of this device (imate kjam) that support smart dialing. Inside the extended rom there is a file named Default_SmartDialing_enable_0915_signed.cab. Perhaps this help you.
thanks
BTW, what's the username and password for login ftp.xda-developers.com?
Or....would anyone can help to extract the files for me?
Thanks!!!!!!!!!!!!
Copy the files to your ppc and run then from within the ppc exporer,
then it will be installed, you don't need to extract anything.
I will send you the files tonight ;o)
Thanks guys!!!
I final got the files "Default_SmartDialing_enable_0915_signed.CAB" and install into my Wizard Chinese Version.
But there are no different and no way to enable SmartDialing.
Would anyone can have a screen capture on it or show me how to enable it.
I still need to search thru the whole contact to start a call.
Thanks
Could you please post the file cause i have the same problem on my i-mate k-jam
Thanks
If you have a KJAM you already have smart dial.
To enable smart dial you have to open the dialer (press green button) and then press right softkey to open the menu, the bottom selection is SMART DIALING OPTIONS that enable/disable the function.
Here is the smartdialing cab...I have installed in chinese Dopod 838 (K-Jam) and no effect
I just think the files seems too small...do anyone know is it enough for installing SmartDialing????
Hey, I'm also using Dopod838 Chinese... The quick dial is enabled by default... no need to do anything in addition. When you're in the phone applet, press your right softkey and select "快速撥號 (I)" can setup speed dial numbers. 8)
He's refering to Smart Dialing, not Speed Dial Tse... The file size is correct miko... How did you install it? Did you copy the cab file to your storage card or whatever and run it from there?
One thing I missed, is the O2 Dial Wizard on my IIs.. It let you edit the number before dialing and set carding card prefix etc.. Too bad it doesn't seem to work on WM5 or my Exec
I recommend on using Phoneplus which I realized is suitable for WM5.
I have tried the CAB file and it is not working, too.
Anyone successfully run Smart Dialing on Dopod 838? I miss this application very much! :roll:
I found the CAB file actually only activate the smart dialing, which does not contain any program file. The program files should already installed in the K-Jam default ROM.
So I think the smart dialing will be able to run in Dopod 838 by copying the following files from K-Jam devices:
- \windows\phcanhtc.dll
- DPadMenu.dll
Anyone can help? :wink:
This is the Smartdialing program i used for XDAIIs before, u can try to install it into the 838, please give result after try.
Thanks Vincentfung for the file. :wink:
I have tried to install the cab. However it doesn't work nor have any change to the dialer. I think it is for WM2003SE. So... we need the WM5 version of Smart Dialing that found in English K-Jam or English Dopod 838, or maybe Universal...
This one is on my device, and it should work ?
qtek9100 / Vario
from where I can download "O2 Plus"
Adv. and disadv. of the O2 Plus Please
Khurram
If you still need this PM me and I'll email it to you
O2 Plus 1.7
This O2 plus is including inside my extend rom.
There is version of O2 plus can be download from from http://www.seeo2.com
You must owe a O2 XDA before downloading this file else it will not work for your device. Or you can register your IMEI and download. It seem that the 1.7 is no more. Is it version 2.0 which is in the website.
This file is version 1.7.
Different between version 1.7 and 2.0.
Version 1.7
- Stable version
- no mp3 files support for ringtone but use less memory
- has a Profile Menu (Silent, Loud, etc, just like Nokia phone)
- has a Divertion Menu (divert your handphone, just like Nokia phone)
Version 2.0
- Uses alot of memory
- it allow you to use mp3 files as the phone ringtone
- very cool design
- hang sometimes
- same feature as 1.7
Make sure you remove SPB Battery Plus or Battery Pack. It is not necessary to install any battery monitoring as O2 Plus come with it, Profile Selector and Divertion Menu.
One more thing, make sure you use Plugs Rom or your own customize roms with without any O2 Connection Junk.
O2 Theme Only
O2 Theme Only
Other Roms
My Customize Extended Roms together with Plugs Roms
ftp://xda:[email protected]/Uploads/Alpine/Extended ROMs
Inside this folder o2 Extended_ROM (English v1.11.171)
- BBConnect_HTC_PocketPC_BB_English_2.0.1.44-48.cab (BlackBerry)
- AlpineForTHBCarkit.sa.cab (Bluetooth for carkit)
- Patch_Update_SIM_Mgr_2.2.1.0.sa.CAB (Sim Mgr Update to 2.2.1)
- Alpine_SMS05272005.sa.CAB (SMS)
- Version.sa.CAB (It just a replaced for the extend version, '1.11.171 WWE') for those who wish to replace the 'PLUGS'.
Inside this folder iMate Extended_ROM (English v1.11.144)
- Default_Alpine_Fix_Jabra800.CAB (For my Jabra headphone/set)
- Default_Alpine_WIFI_v20302_05102005002.CAB (Wifi fix)
- Default_SkypeForPocketPC.CAB
- O2 Plus 1.7
And of course some other software
If you have any CAB file inside the ftp://xda:[email protected]/Uploads/Alpine/Extended ROMs, and wish to know what it is. Post it here. I can reply to you what is the cabfiles for, as I have tried install everything from the 3 folder and my xda2i hang and have to hardset afew times. Just for testing to see what cabfile is that use for.
Cheers
wat if i dont strip the spb monitoring program? what will happen?
jeffkewin said:
My Customize Extended Roms together with Plugs Roms
ftp://xda:[email protected]/Uploads/Alpine/Extended ROMs
Inside this folder o2 Extended_ROM (English v1.11.171)
- BBConnect_HTC_PocketPC_BB_English_2.0.1.44-48.cab (BlackBerry)
- AlpineForTHBCarkit.sa.cab (Bluetooth for carkit)
- Patch_Update_SIM_Mgr_2.2.1.0.sa.CAB (Sim Mgr Update to 2.2.1)
- Alpine_SMS05272005.sa.CAB (SMS)
- Version.sa.CAB (It just a replaced for the extend version, '1.11.171 WWE') for those who wish to replace the 'PLUGS'.
Inside this folder iMate Extended_ROM (English v1.11.144)
- Default_Alpine_Fix_Jabra800.CAB (For my Jabra headphone/set)
- Default_Alpine_WIFI_v20302_05102005002.CAB (Wifi fix)
- Default_SkypeForPocketPC.CAB
- O2 Plus 1.7
Click to expand...
Click to collapse
is there any possibility to upload these files somewhere? thanks
O2 plus required for Xda IIi
Can anybody help me in giving a file link aor a file in itself
Many many thanks
Thanx for providing the link.
Still need help of EXPERTS
Dear Jeffkewin, Let me first thank you for that file, secondly, I unzipped that file, copied that .cab file in "my storage" under "my device"(thru active sync) and installed it. It did install, but gave me a pop up screen O2 Plus is designed for some models of Xda check seeO2.com for more details.
Summing up it's not working very fine, Like if i do soft reset while on the startup it again gives me that same message.
It is working like on the main screen i see those O2 plus programs but under application tab i cannot open anything.
Let me clarify that i have O2 Xda IIi with UK Rom, I have set it to corporate user, with no O2 Active running on it.
Please help. can u provide me ur mail id. mine is rajiminhas at the rate yahoo dot com.
Thanks in advance.
What does the wifi fix do?
Based of the IIWPO solution initially meant for Wallaby devices (see http://forum.xda-developers.com/viewtopic.php?t=2526), I created a customizable installer for Himalaya:
See the Wiki page on IIWPO
http://wiki.xda-developers.com/wiki/IIWPO
Hopefully IIWPO suprises a lot of thiefs!!!!!
IIWPO has proven that it is also fully functional on Wizard. I guess this means it woll be working on WM5 devices in general.
One remark: Due to the different memory behaviour under WM5 you might notice IIWPO does not send an SMS immediately after you change the onwer-info (ie. for test purposes). But it definitely will when the device is woken up after some time!
I followed every step and it isn't working for me.
I checked every setting after installing and everything is in the right folder / registry.
I rebooted my Wizard several times (poweroff button / pen soft-reset) and it never send an SMS.
WM2005
edsub:
How do you get around the fact that WM2005 no longer has a useful extended rom and config.txt? Do you now install a iiwpo.exe into the \Windows\Start-up folder?
Any ideas on how to hide it successfully the way it used to be in a hidden and locked extended Rom?
M
Anyone has tried it on Kjam?
QuasaR said:
I followed every step and it isn't working for me.
I checked every setting after installing and everything is in the right folder / registry.
I rebooted my Wizard several times (poweroff button / pen soft-reset) and it never send an SMS.
Click to expand...
Click to collapse
I guess you did personalize the platformxxx.reg file (put in your own data, note the phone# needs to be in international format).
If then the registry just contains the correct data, ie YOUR correct name and SOMEONE's phone# (to send to sms to) I cannot imagine it is not working. The SMS should be sent when your device is woken-up (by just pressing power button). Afaik the SMS is not sent when the device is switched on (ie. after pressing power button 5 secs) or a reset.
pneuma said:
Any ideas on how to hide it successfully the way it used to be in a hidden and locked extended Rom?
Click to expand...
Click to collapse
Until there is a decent solution the trick is:
-Backup your OS & radio rom using aWizard tools
-Flash with an 1.5.x ROM using regular procedure (RUU)
-Create your own ExtROM (its writable in this version)
-Restore your backed-up OS & Radio ROM using aWizard tools
Advantage of this is the thief also cannot purge the ExtROM (without upgrading) . . .
slumpolo said:
Anyone has tried it on Kjam?
Click to expand...
Click to collapse
As KJam is a Wizard also there is no reason why it should not work
is it possible to use this tool, but without locking the ExtendenRom and without rom upgrade?
even if it is less safe...I prefer using my Extended Rom for some applications but also prefer not to upgrade my Qteck9100 yet.
So I have put it all in the extended rom, but will this 'Config.txt' and 'Autorun.exe' be invoked on a hard reset when the Extende Rom is not locked...
when installing, should i install it in the extende rom or in the device itself?
thanks for the great tips!
CIAO!
VOODOOS!L
edsub said:
QuasaR said:
I followed every step and it isn't working for me.
I checked every setting after installing and everything is in the right folder / registry.
I rebooted my Wizard several times (poweroff button / pen soft-reset) and it never send an SMS.
Click to expand...
Click to collapse
I guess you did personalize the platformxxx.reg file (put in your own data, note the phone# needs to be in international format).
If then the registry just contains the correct data, ie YOUR correct name and SOMEONE's phone# (to send to sms to) I cannot imagine it is not working. The SMS should be sent when your device is woken-up (by just pressing power button). Afaik the SMS is not sent when the device is switched on (ie. after pressing power button 5 secs) or a reset.
pneuma said:
Any ideas on how to hide it successfully the way it used to be in a hidden and locked extended Rom?
Click to expand...
Click to collapse
Until there is a decent solution the trick is:
-Backup your OS & radio rom using aWizard tools
-Flash with an 1.5.x ROM using regular procedure (RUU)
-Create your own ExtROM (its writable in this version)
-Restore your backed-up OS & Radio ROM using aWizard tools
Advantage of this is the thief also cannot purge the ExtROM (without upgrading) . . .
slumpolo said:
Anyone has tried it on Kjam?
Click to expand...
Click to collapse
As KJam is a Wizard also there is no reason why it should not work
Click to expand...
Click to collapse
I personalized everything but it never sends an SMS so i tried to run the files manually.
When i run the file \Windows\iiwpo_main.exe is sends the SMS immediately.
Any ideas on where it can go wrong ?
I also tried to run the \Windows\iiwpo_start.exe and \Windows\Opstarten\iiwpo_start.exe but that did nothing.
Himalaya + WM2005
edsub:
Referring to your reply, sorry I failed to mention I am using Himalaya and enjoyed the iiwpo up until I upgrade to WM2005, after which the extended rom became a useless memory area for Hima devices and was therefore re-claimed with buzz's DOCtools.
Does the extrom in wizard wm5 still have a purpose? As far as I know the files like config.ini never get called by wm5?
Also, Is the current release a rewrite for WM5 or still the same version since 2003 1st edition?
How can i unnistall IIWPO ? I need real HELP pls
Hi guys
I installed IIWPO in my Qtek9100 (Wizard), followed all steps and it doesnt work.
So I decide to unistall it.
I did it from Revome Programs option and with resco i removed registry key .
Now when i do a soft reset i receive allways a Notification Error Mess : Cannot execute \windows\IIWPO_main.exe
This appears also during phone calls !!!
Apps are not in \windows and no more in \windows\startup, registry key is not there. What can i do more ?
Please I need HELP
Thanks
Jorge
My guess is that non-functioning has to do with localized versions of WM5.
The cab uses hard-coded pathnames (needed by setup.dll, especially during the customisation process)
It is confirmed that un-install issues have to do with a left-behind notification in the notification db.
Use Check Notifications by scarybear software to get rid of all IIWPO notifications OR do a hard reset :wink:
I updated the IIWPO wiki on this
Dear all 818pro(ENG OS)
The reason causing memory card disappear problem is dopod built-in software.(inside Extension Rom)
Only one method to solve, hard reset the PDA but without installed any built-in software as follow:
Right now I hard-reset the PDA, until the password setup, and then the PDA begin install build-in software...soft reset immediately.
If you used above hard-reset method which don't installed any built-in software. You only lost:
1. Smart Dailer
2. Built-in Voice Commander
3. Autoconfig
4. clearvue pdf
I used two days and everything work fine. You may ask why I so sure? Because I noticed the speed of reading memory card is different before which listed below:
1. Before using above mentioned method: When the PDA turn on (In sleeping mode and phone on mode), it need 1-3 seconds to read the memory card. If you installed Today Plug-in Software, you may found that it need 1-3 seconds to detect the memory card.
2. After using above mentioned method: When the PDA turn on, the PDA detect the memory card simultaneously.
As a result, I can assure this method can solved the memory card disappear problem.
Some experience would like to share with all user:
1. I installed all programs in the ROM. If someone installed programs in the memory card, please let me know the result.
2. I can installed back the smart dialer software. Please search this forum to download.
3. When you connected GPRS, a 'Disconnect' button (and Timer) to the Connection List for GPRS is disappeared. You can make registry hack to switch back.
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
4. PDA can detect 'Phone Service Provider' automatically. However, when you need GPRS, you need manuel setup. I used 'PEOPLES' which is Hong Kong Service Provider and take as a Example setup:
Go to Setting > Connections > Tap Connections
1. Choose > My ISP - Add a new modem connection
2. You need to enter > a Name (Which name you like) and Select a modem [Cellular Line (GPRS)] > Next
3. Acess point name : Peoples.net > Next
4. Ignore the user name and password. > Finish
Thanks for the Reg Hack!!! Worked perfectly on the Dopod 818Pro!!!!
Thanks!!!
voyager
sas90850 said:
2. I can installed back the smart dialer software. Please search this forum to download.
Click to expand...
Click to collapse
Hi sas90850,
What a good job you've done! Excellent!
I'm wondering whether this topic is the instruction you said (WM5 smart dial)
or you could point out where I can download the smart dialer software and have an installation instruction, thanks.
I've 818Pro and would like to do the same "UPGRADE"... :wink:
Dear all user
you can download the built-in smart dialer software as following link. Make sure you download the "SmartDialing_enable_0915_signed.CAB" only.
http://forum.xda-developers.com/viewtopic.php?t=32458&highlight=smart+dialer
Copy the .cab file to PDA and install. Must soft reset. :wink:
If anyone installed software in the memory card, please post here whether the disappear problem is solved. :?:
sas90850 said:
Dear all user
you can download the built-in smart dialer software as following link. Make sure you download the "SmartDialing_enable_0915_signed.CAB" only.
http://forum.xda-developers.com/viewtopic.php?t=32458&highlight=smart+dialer
Copy the .cab file to PDA and install. Must soft reset. :wink:
If anyone installed software in the memory card, please post here whether the disappear problem is solved. :?:
Click to expand...
Click to collapse
Just to let everyone know that you already have this same file as well as the GPRS disconnect button CAB file in your own Dopod 818Pro's Extended_rom. You can browse and copy files in this hiden folder with GSfinder.
This worked for me also with the jamin. I soft reset after hard resetting and it gave me back rom and fixed the sd issue. Thanks
Edit: After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
Hi, this method seems to have solved most of my Jamin troubles too! Thanks!
I need just some help to get the GPRS timer: I don't find the registry. Is it in the HKEY_CURRENT USER OR THE HKEY_LOCAL_MACHINE? I found the Control Panel\Phone, but not the "Flags 2" registry that needs changing as described.
Many thanks!
Dear Fidipaldi
You need to add a new registry. Make sure you use DWORD Value. The location is shown below.
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
1. To add a Disconnect button only:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 8
2. To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 16
3. To disable both the Disconnect button and the timer:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 0
Dear mikewchandler
Question :After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
1. Copy the program *.exe file which installed in the SD Card.
2. Use File Explorer:
Go to Windows\Start Menu\Programs :arrow: Paste Shortcut
You will get the programs icon.
Dear SAS,
Many thanks for your help!!
It works great! I also managed to get the smart dialer back. The only application that is missing is Clearview.
So far my Jamin does not seem to crash on a regular basis as it did before. It must be the add on software that made the device crash.
Finally I can enjoy the device. Thanks again!
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
sas90850 said:
Dear mikewchandler
Question :After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
1. Copy the program *.exe file which installed in the SD Card.
2. Use File Explorer:
Go to Windows\Start Menu\Programs :arrow: Paste Shortcut
You will get the programs icon.
Click to expand...
Click to collapse
Here's what I usually do on a new device or after a hard reset. I have about 10 progs on my sd card (total commander, tweaks2k2, etc...) and I have created shortcuts to them and placed them in a folder on my sd card. I then copy those and paste them in the /windows/start menu/programs folder and everything works well. I've noticed this quirky behavior on the jamin so far?
I did what you recommended by not installing the ext rom. I'm happy with a quicker device and more rom; however, I'm still having this little issue with the icons not appearing correctly in the start menu? Kind of strange. The white and blue default box is what's showing up (as if there is no shortcut icon) but the progs open just fine? :shock:
which program should we install
After Hard Reset and Review the extended rom,
There are serveral progarms avaliable for install
I just wonder what program from Extended Rom should we normally install in order to make phone become functional as the standard automatic install of extended rom?
Secondly, what each one of them is for? does anybody has information?
Thank you very much
sas90850 said:
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
Click to expand...
Click to collapse
The SD card problem seems disappear but it still soft resets itself after standby and battery charging for a while.
Khuanchai said:
sas90850 said:
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
Click to expand...
Click to collapse
The SD card problem seems disappear but it still soft resets itself after standby and battery charging for a while.
Click to expand...
Click to collapse
After 6 days used, I don't have any soft reset problem at all no matter in standby mode, sleeping mode and/or battery charging either the PDA is turn on/off......any condition.:roll:
re: Mike Chandler
Try this....
goto settings, menu and unclick just one of the programs in question. select ok and then checkout the start menu. Should be well again. Then go back and reselect your menu button you unclicked earlier. All is well. I'm not sure if this is a permanent solution or not but it does work.
Mike
mtarro said:
re: Mike Chandler
Try this....
goto settings, menu and unclick just one of the programs in question. select ok and then checkout the start menu. Should be well again. Then go back and reselect your menu button you unclicked earlier. All is well. I'm not sure if this is a permanent solution or not but it does work.
Mike
Click to expand...
Click to collapse
Thanks Yes it worked temporarily and then after a soft reset...same. I've narrowed it down a bit. The progs show fine in the bottom of the start menu (recently run progs) but if I add them to the top part of the start menu, they show fine until a soft reset....then they don't again. What I also noticed is if I copy the .exe and paste it in the start menu it shows fine....the only problem was when I copied the .exe and pasted a shortcut to the .exe. Anyway, I've settled on a fix. A few of the progs that didn't display correctly, I've just added to ilauncher.
Don't spend any more brain power on it for now....it must be something specific to me as others aren't posting problems like this. Thanks again
@mikewchandler
First of all it's nice to see you again on this forum!
To fix your problem try installing Signed_IconsDll.sa.cab from the extended rom. This should fix your problem!
@ALL
Regarding the SD card issue, the problem seems to be originating from the file Signed_SD_Driver.sa.cab. Not installing just this cab will also solve the problem.
I would suggest installing the following cabs as well as these improve system stability or add functionality:
CAB-ConnectionSpeedMax.sa
CAB-Shortcut-MMS1-JAVA5XX-CV-Dopod........
CAB-WapPushSMS
Signed_Disable_ErrorReport.sa
Signed_DisconnectButton_3s.sa
Signed_IconsDLL.sa
Signed_PIE_View_Default.sa
Signed_Prophet_DopodAsia_UA.sa
Signed_Version.sa
SmartDialing_enable_0915_signed
Thanks kta....it's great being here but I'm going to miss the eten community. :?
Thanks for the tips. Yeah, I didn't install the ext rom at all....I should have mentioned that (if I didn't?). Thanks again.
Edit: Where's the best place to get the files off the ext rom? I don't guess I know how to extract the ext rom to copy before hard resetting, soft resetting to keep it from installing. Hope that runon sentence makes sense.? :roll:
I couldn't wait until July to release this... new build of WM6.5 that fixes the keyboard issue (but the SYM key still works, which was disabled by Montecristo's registry patch) and the device.exe issue (according to keyx's A2DP instructions)...
WM6.5 build 21820 for the iPAQ 910c/912c/914c Business Messenger:
21820br0609 download here
Known bugs/fixes:
- Right softkey on "Clock" homescreen panel requires this fix by EREZYAD (thanks!)
- I accidentally cooked .NET CF 2.0 into this ROM instead of 3.5. You can still run version 3.5 using these instructions.
This ROM features HP's newest firmware base, meaning increased max volume and other fixes. I have removed the following OEM junk:
- Cyberon Voice Commander
- iPAQ Tips, Help & Support
- HP Photosmart Mobile (and screensaver)
- Snapfish uploader
- HP custom IE homepage
- HP Today theme (and other customizations)
- Google Maps (old)
- Goolge Search (old)
- iPAQ DataConnect
(...since the new WM6.5 AutoConnect feature does the same thing)
This ROM contains the following little additions:
- NumBattery
- GPS Viewer
- Backlight Controller 0.9.5.2
Once I get around to making some new OEM packages for my favourite freeware apps, I'll bundle those in the "m" series next month:
WM6.1 21042br0709m "motherload" - pending
WM6.5 21820br0709m "motherload" - pending
INSTRUCTIONS FOR FLASHING:
1. Get a microSD card sized 2 GB or lower (SDHC won't work) and format it with regular FAT filesystem. Copy my FLASH.DIO to the root of the card. Insert card into your device.
2. Put your device into SDLoader mode by holding VOLUP+OK(button on right side) and pressing RESET. Make sure your battery has a decent charge (over 50%) and isn't connected to any USB charge or sync cable (or else your device will just go into RUU mode).
3. Watch the magic... SDLoader will check the file integrity, flash to your device ROM, do a clean reboot (can take a minute longer than usual) and then go into the "Welcome to Windows Mobile, tap here to continue" stuff.
4. If you run into any problems, repeat steps 1 through 3 with a FLASH.DIO that has worked before (i.e. you can make one from HP factory ROM update using Paloma's instructions posted here)
CREDITS
- Keyx for kitchen tools and early guidance
- PPCGeeks for 21820 sys and xip
- HP for the oem
- many others on xda-devs and ppcgeeks for their releases, tutorials, etc.
DONATION?
- I've never made a donation on xda-devs
- I'm not interested in a donation from xda-devs
- I cook mainly for my own use and interest
- I share what I cook, because sharing is easy
- I don't take orders
I'm downloading it
It works like a charm! No bug at all till now! Fast and Stable! Just the Clauncher doesn't work, but maybe it's my problem!
The issue with the keyboard is fixed! Great Job
This would seem to confirm that despite what HP says, the "Rogers 910c only" OEM files are compatible with the 912c and 914c.
I could not make the dump your rom ... I could not use the xip for my roms ...
Montecristo said:
I could not make the dump your rom ... I could not use the xip for my roms ...
Click to expand...
Click to collapse
You can't dump the whole thing because I used keyx flex kitchen; there are too many files to use the old (dumpable) method.
However, you can extract the xip from my FLASH.DIO using this command:
osnbtool -d FLASH.DIO 1 xip.bin
Then xip.bin is your xip; you'll want to insert that into an original 80 MB TEMPLATE.ROM (i.e. whatever you've been using to cook so far) using
osnbtool -c TEMPLATE.ROM 1 xip.bin
Then delete your previous TEMPLATE.ROM and rename TEMPLATE.ROM.NEW to drop the ".NEW" part.
hi
i have insalled it (testing it now)
on this rom the nav app igo works
also my lang hebrew works (but it did with every 900 rom )
the keyboard issue is the same but my test is logging using opera mini (on your rom & monto cab fix the keyboard works on opera...)
i use an app called "o3
tuch" on monto rom the app didnt see incomming sms there4 it did not show up on all screen and and by doing so i lost some functions (auto reply larg veiw..)
on your previus rom it did work with all function but now it is like monto..s' rom
can u see way/what is the diff comperd to the prev one?
something with sms event that stops after WM popup it's sms window (this way other apps can not use this event)
will try now the push maill....
4 now it looks ok 4 my the first thing i tested before heb was igo8 and it is ok now
tnx
EREZYAD said:
hi
the keyboard issue is the same but my test is logging using opera mini (on your rom & monto cab fix the keyboard works on opera...)
i use an app called "o3
tuch" on monto rom the app didnt see incomming sms there4 it did not show up on all screen and and by doing so i lost some functions (auto reply larg veiw..)
on your previus rom it did work with all function but now it is like monto..s' rom
can u see way/what is the diff comperd to the prev one?
something with sms event that stops after WM popup it's sms window (this way other apps can not use this event)
Click to expand...
Click to collapse
RE: Opera Mini... it works for me on this ROM.
RE: Your app with SMS... try disabling the on-screen message for new text message in Sounds and Notifications control panel.
The difference with this ROM is that it is a new build. Mainly that fixes the keyboard issue, which was in the OS.
benjaminries said:
RE: Opera Mini... it works for me on this ROM.
RE: Your app with SMS... try disabling the on-screen message for new text message in Sounds and Notifications control panel.
The difference with this ROM is that it is a new build. Mainly that fixes the keyboard issue, which was in the OS.
Click to expand...
Click to collapse
opera mini works at all roms the thing was thet u cannt log into the forum using opera mini
on the new ver of opera mini cab u can but it is not as good as the prev ver
it indicat on issuse with the keyboard ,if u use monto key fix you can log with any opra Ver
as 4 sms the removal of notefication did not work
anyway tnx 4 the rom
Hello,
i'm maybe the only one, but i'm having problems... when i click on the right-button for open the wireless manager from the today screen, i get an error message that the app link doesn't exist.
Except this i love this firmware... very fast and with all apps already
record button does not seem to work on this one...
Montecristo said:
I could not make the dump your rom ... I could not use the xip for my roms ...
Click to expand...
Click to collapse
Are you working on a multilanguage version?
Which .net Framework is included in this ROM? If you run "Device update" by CRC (Excellent app!), it complains that the .net CF is too old. Never happened to me before....
AlexMagik said:
Hello,
i'm maybe the only one, but i'm having problems... when i click on the right-button for open the wireless manager from the today screen, i get an error message that the app link doesn't exist.
Except this i love this firmware... very fast and with all apps already
Click to expand...
Click to collapse
try 2 install this cab (install ,turnoff device for 5 sec,SR)
then when clock is marked try the right softkey
good luck
EREZYAD said:
try 2 install this cab (install ,turnoff device for 5 sec,SR)
then when clock is marked try the right softkey
good luck
Click to expand...
Click to collapse
wow this is really fast!
i will try tonight and come back to you
thank you!
EDIT:
1. Great fix! now it's perfect
2. the Record button works after go in settings and apply "recorder"
Thanks
Thanks Benjaminries for this great ROM
ROM instalation is very easy for newbie like me
the wireless manager is fixed easy with Erezyad but the record button is still not working
and i want to ask, is anyone know how to improve camera quality?
thanks
dronel said:
Thanks Benjaminries for this great ROM
ROM instalation is very easy for newbie like me
the wireless manager is fixed easy with Erezyad but the record button is still not working
and i want to ask, is anyone know how to improve camera quality?
thanks
Click to expand...
Click to collapse
didnt start/settings/personal/buttons helpd u?
as for camera go:
front door/camerashop/bay/Nikon
EREZYAD said:
try 2 install this cab (install ,turnoff device for 5 sec,SR)
then when clock is marked try the right softkey
good luck
Click to expand...
Click to collapse
Thanks for posting that cab. I had just fixed it in the registry myself afterward and forgot to tell people: HKLM\SOFTWARE\Microsoft\CHome\CClock\SK2TEXT and SK2URL
parkhaus said:
Which .net Framework is included in this ROM? If you run "Device update" by CRC (Excellent app!), it complains that the .net CF is too old. Never happened to me before....
Click to expand...
Click to collapse
Oh weird - I just looked and it is NetCF 2.0 (what????) which I guess was put in by my SYS source at ppcgeeks. I'll stick NetCF 3.5 in the July release, promise. For now, download and install the .Net CF 3.5 redistributable from Microsoft.
Pranix said:
record button does not seem to work on this one...
Click to expand...
Click to collapse
Dude, the Record button works just fine for me. Are you talking about hitting it once? That shows up as the VoiceCMD button in the Buttons control panel - it comes unassigned, but you can point it to the Backlight control (my personal favourite) or Voice Command or whatever.
The "Record" button requires you to press and hold down the button while you record a voice note.