Related
I have a problem. The alarm time is not set, yet every morning at 9:45am, my alarm goes off. In the alarm program, no days are selected, and none of the 3 alarms are turned on. Why is this MDA beeping like crazy every morning at 9:45??? I've tried soft resetting, but for the past 3 days, it still goes off
djswivel said:
I have a problem. The alarm time is not set, yet every morning at 9:45am, my alarm goes off. In the alarm program, no days are selected, and none of the 3 alarms are turned on. Why is this MDA beeping like crazy every morning at 9:45??? I've tried soft resetting, but for the past 3 days, it still goes off
Click to expand...
Click to collapse
It had the same problem, I once set the alarm at a certain time, disabled the alarm but it kept going off each day. I was unable to find the cause of this.
It did not searched futher because I was intending to change firmware at that time, of course It was gone atfter that.
What kind of software are you using, maybe we had similar stuff running.
djswivel said:
I have a problem. The alarm time is not set, yet every morning at 9:45am, my alarm goes off. In the alarm program, no days are selected, and none of the 3 alarms are turned on. Why is this MDA beeping like crazy every morning at 9:45??? I've tried soft resetting, but for the past 3 days, it still goes off
Click to expand...
Click to collapse
you probably have some undeleted notification duplicate in Wizard's system and all you need is CheckNotifications:
http://www.scarybearsoftware.com/checknotifications.zip
run it on Wizard and look for entry which might look like your 9:45am alarm and delete it. should work.
I don't have much software installed. Just SPB Pocket Plus, XDA RegWizard, OpenNETCF, and Flash Player. It's pretty much stock other than a few skins.
EVA_D, again I run into problems. I'm a mac user, and we only use macs at the recording studio, so I can't install the .exe file. Can you possible install it on your computer, and then post a .cab file for me??
Ahh this is a nightmare....Luckily the past few days I've had to get up early, but usually I work til 2am, 4am, sometimes even 6am (At a recording studio), so a lot of times I don't fall asleep until 8am, and if I get woken up at 9:45 because of this, I will probably crush the phone in the palm of my exhausted hand...
anyone??
Here is the check notifications exe taken from my device - just run it on your device should work.
If that does not work i will post memaid to you from my device.
If nothing works then its hard reset time - then use a different alarm, see here http://forum.xda-developers.com/viewtopic.php?t=43692
That doesn't work. I emailed the exe to my phone, but it wont install. I need the cab file. Can you post the cab that is extracted from the exe?
Strange works on my device without a cab install.The exe is a standalone exe not an install exe. Sorry dont have cab for it
Ahh, I didn't realize it was an actual app, and not an install file. It's loaded up, and I have 472 events, which the app says is very high. So how does this work?? Am I supposed to clear ALL events??
Does the MDA store ALL the event information from the day it was turned on? It seems so because 472 seems to be a lot. Is this a bug on the MDA that may cause it to run slow? What (if any) are the effects of clearing ALL events? Will this basically be a reset pf the phone and require me to set up my mail, proxy, and other information again, or does it just deal with notifications and whatnot?
djswivel said:
Ahh, I didn't realize it was an actual app, and not an install file. It's loaded up, and I have 472 events, which the app says is very high. So how does this work?? Am I supposed to clear ALL events??
Click to expand...
Click to collapse
NO! not ALL! get into Options -> settings, check both boxes -> OK. then tap 'Clear' button on top of main screen. number of notification should reduce significantly (in my case it's about 15-20 after clearing). some notifications are essential for running system and should never be deleted.
Wow, 472? I think I have 13. You definitely need to do some spring cleaning there.
if i delete them ALL what is the end result?
djswivel said:
if i delete them ALL what is the end result?
Click to expand...
Click to collapse
i don't know but if you'll try, post back the results.
eva_d said:
djswivel said:
if i delete them ALL what is the end result?
Click to expand...
Click to collapse
i don't know but if you'll try, post back the results.
Click to expand...
Click to collapse
im not quite sure i have the balls for that yet lol
If you check both boxes and then delete it wont delete your important notifications just the duplicates etc....
eva_d said:
djswivel said:
I have a problem. The alarm time is not set, yet every morning at 9:45am, my alarm goes off. In the alarm program, no days are selected, and none of the 3 alarms are turned on. Why is this MDA beeping like crazy every morning at 9:45??? I've tried soft resetting, but for the past 3 days, it still goes off
Click to expand...
Click to collapse
you probably have some undeleted notification duplicate in Wizard's system and all you need is CheckNotifications:
http://www.scarybearsoftware.com/checknotifications.zip
run it on Wizard and look for entry which might look like your 9:45am alarm and delete it. should work.
Click to expand...
Click to collapse
i have the same problem but i cant find any alarm times - help!
Hi,
the same problem with my mini s, but new info. I remember that I have set a notification at 1:00PM someday last week, and it was good. after that, It keeps notifying everyday at 1:00PM and I cant find any entries in the notifications or tasks.
I used the program posted above, but it did not show any alarms set at 1:00PM.
Stupid wizards,
Any help?
taking the duplicates off certainly worked as no alarm this morning YAY thanks guys x
taking the duplicates off certainly worked as no alarm this morning YAY thanks guys x
Click to expand...
Click to collapse
mee 2, was waiting for the alarm at 1:00PM, but id did not fire today. Happy alarms!
No longer getting Alarm notifications but Alarm vibrates/plays sound etc. and alarm is impossible to turn off - which gets very embarassing sometimes!
I am running Mortsaver - anyone else have this problem and, even better, a fix?
uninstalled Mortsaver - but still same prob. alarm continues even after a soft reset
I have the same Problem. Can someone help?
thx
warmkiwi99 said:
No longer getting Alarm notifications but Alarm vibrates/plays sound etc. and alarm is impossible to turn off - which gets very embarassing sometimes!
I am running Mortsaver - anyone else have this problem and, even better, a fix?
uninstalled Mortsaver - but still same prob. alarm continues even after a soft reset
Click to expand...
Click to collapse
Came across this the other day - might be of some help?
http://pocketpcthoughts.com/forums/viewtopic.php?p=420291&sid=9b3616d482786b00da3747a4fc84dbcd
Mike
Thnaks - I tried the battery thing but it didn't work for me. I finally fixed it by clearing duplicates in the Notification queue using Pocket Mechanic (trial download)
warmkiwi99 said:
Thnaks - I tried the battery thing but it didn't work for me. I finally fixed it by clearing duplicates in the Notification queue using Pocket Mechanic (trial download)
Click to expand...
Click to collapse
Now that's useful to know. But just a note of caution, I'm sure I've seen posts where people using pocket mechanic got into a lot of bother - I could be wrong though.
Mike
It was the first time I have set my alarm to wake me up on my 8525. Needless to say I could not get the alarm to turn off. I have tried soft reseting and everything. Now when the phone restarts the red indicator light flashes and even without any alarms checked, the unit continuously plays the alarm over and over again with about a 15 second delay.
Has anyone seen this before? It is driving me insane!
I have the at&t rom and it has worked fine for over a month now..
What could it be?
Its a bug. I had the same issue on a previous AKU 3.x rom.
The only way I got rid of it was reinstalling my Rom...
I had it with a TyTN with factory supplied ROM (AKU 2.x). There was no dismiss soft-button, nor the menu to do anything; reset didn't help either. At the time, I just turned off the sound for notifications and hardresetted the phone in the evening.
Jörg
ironbear said:
It was the first time I have set my alarm to wake me up on my 8525. Needless to say I could not get the alarm to turn off. I have tried soft reseting and everything. Now when the phone restarts the red indicator light flashes and even without any alarms checked, the unit continuously plays the alarm over and over again with about a 15 second delay.
Has anyone seen this before? It is driving me insane!
I have the at&t rom and it has worked fine for over a month now..
What could it be?
Click to expand...
Click to collapse
Well, yes there are some known issues with the alarm. It may however not be necessary to go to the lengths of changing the ROM and doing a hard reset.
One of the most common issues is that the alarm notification store becomes cluttered up with duplicates and junk. (And this can happen regardless of whether you use the alarm much or not!!).
The standard way to clear the notifications queue is to use a third party tool and there are several but the best known are:
SKtools (Not Freeware)
http://www.pocketgear.com/software_detail.asp?id=14288
Memmaid (Not Freeware)
http://www.pocketgear.com/software_detail.asp?id=14279
Scarybear (Freeware)
http://www.freewareppc.com/utilities/notificationclearfix.shtml
Use any of these to clear your notifications cue. I personally like sktools as it has a host of other facilities well worth having - but the others are good too.
Mike
Is the behaviour of absent dismiss and menu buttons (the soft buttons) also the result of a messed up notifications queue?
I did have issues once where alarms went of twice at the same time, etc.; but at least I could turn them off when this occured.
Jörg
V J said:
Is the behaviour of absent dismiss and menu buttons (the soft buttons) also the result of a messed up notifications queue?
I did have issues once where alarms went of twice at the same time, etc.; but at least I could turn them off when this occured.
Jörg
Click to expand...
Click to collapse
Good question - and I do not know the answer for sure. The first two posters above do not say whether they get the dismiss option at all or whether they get the dismiss option but it just does not cancel the alarm.
That was the reason for my "caution" in replying and saying they "may" not need to change ROM or Hard reset.
Mike
Wow!
I just used scarybear and I had 899 items that were sitting there! That could slow down the old 8525 huh??? That seems like quiite the large oversight on the part of HTC does it not?
ironbear said:
I just used scarybear and I had 899 items that were sitting there! That could slow down the old 8525 huh??? That seems like quiite the large oversight on the part of HTC does it not?
Click to expand...
Click to collapse
Wow! indeed.
Question is will it now work correctly?
I wouldn't blame HTC for this one though, it's a M$ problem.
Hope it works, if not it's a hard reset next step. Mine had this problem but ok now after clear out. You may find you've claered out some notifications you do want. That's ok though you can reset them. Also if you ever restore from a backup you may need to re-clear the duplicate notifications.
Mike
mikechannon said:
Well, yes there are some known issues with the alarm. It may however not be necessary to go to the lengths of changing the ROM and doing a hard reset.
One of the most common issues is that the alarm notification store becomes cluttered up with duplicates and junk. (And this can happen regardless of whether you use the alarm much or not!!).
The standard way to clear the notifications queue is to use a third party tool and there are several but the best known are:
SKtools (Not Freeware)
http://www.pocketgear.com/software_detail.asp?id=14288
Memmaid (Not Freeware)
http://www.pocketgear.com/software_detail.asp?id=14279
Scarybear (Freeware)
http://www.freewareppc.com/utilities/notificationclearfix.shtml
Use any of these to clear your notifications cue. I personally like sktools as it has a host of other facilities well worth having - but the others are good too.
Mike
Click to expand...
Click to collapse
Thanks man u made my day
I suggest also free program to delete the Notification que one by one Or choose which to delete
Task Manager v2.7 (DFRunningApps)
http://forum.xda-developers.com/showthread.php?t=280104
Regards
great thread!
Had the same problem in my Wizard today and solved it thanks to this thread.
I used taskman 2.7 in Faria's WM6 ROM.
regards,
Scary Bear download link no longer works.
Any other free alternatives?
Thanks!
Guys,
My Touch Diamond locks every few minutes on account of the Security Policy enforced by Exchange.
This creates a problem. If the phone is in locked mode and if the alarm has been set or a reminder comes up, there seems to be no option to dismiss it. I have to first unlock the phone and then press the bell like icon on the task bar and then access the reminder. The ringer keeps on ringing in the meanwhile. Its quite irritating especially if it is the morning alarm. This wasnt the case in TyTn II.
I have tried installing Zenyee, but even Zenyee doesnt work. The security policy still locks up the phone.
Has anybody else faced a similar problem?
Thanks,
vinayaksupekar said:
Guys,
Has anybody else faced a similar problem?
Thanks,
Click to expand...
Click to collapse
Yeah, I've had a similar experience. I use my MDA Compact IV as an alarm clock like I did with my HTC Touch. With the touch, I could snooze the alarm without unlocking. With the MDA I have to unlock. I'm even considering getting an alarm clock now!!!!
Mark
Same inproper behaviour with my touch.
I cannot dismiss my alarms even I unlock my device. I cannot see alarm reminder at all. I have to boot it up every morning after alarm. . I have same company policy in use due to Exchange.
Wow! Looks like we are the only guys facing this problem. None of the other Diamond users seem to be affected by this issue.
vinayaksupekar said:
Wow! Looks like we are the only guys facing this problem. None of the other Diamond users seem to be affected by this issue.
Click to expand...
Click to collapse
Maybe other people are using a free SW called "StayUnlock" that overrides your exchange servers security policy.......search for it on this site or on google.....
Download link is here: http://www.zenyee.com/wp-content/uploads/2007/01/zenyeecom-stay-unlock.zip
michi123 said:
Maybe other people are using a free SW called "StayUnlock" that overrides your exchange servers security policy.......search for it on this site or on google.....
Download link is here: http://www.zenyee.com/wp-content/uploads/2007/01/zenyeecom-stay-unlock.zip
Click to expand...
Click to collapse
Thanks Michi123, but Zenyee was the first thing I tried, it still locks the phone. Cant understand.
Thanks.
recently my phone has not been going off when I get an appointment.
Lets say I set an appointment for 2 pm and ask for a reminder 30 mins before. I dont get any sound or notification.
Any idea whats going on?
Thanks
CorruptedSanity said:
recently my phone has not been going off when I get an appointment.
Lets say I set an appointment for 2 pm and ask for a reminder 30 mins before. I dont get any sound or notification.
Any idea whats going on?
Thanks
Click to expand...
Click to collapse
Not to state the obvious, but have you checked Settings > Sounds & Notifications to ensure that notifications isn't unticked?
I am using SPB phone suite which has profiles.
I checked notifications is ticked.
Is it just that the notification tone isn't playing?
There was a bug with some of Dutty's roms that if your notification tone wasn't set to the default one, it wouldn't sound at all.
Yes no notification alarm or pop up.
So I have an appointment for 10 am and I put a 30 min reminder. I will get no reminder, the profile will switch to meeting mode automatically but no popup reminder or sound notification.
Im using the stock ROM.
Some one please help.
I had the same problem few months ago but after about a week time it started to work again itself. I don't know why it didn't work. Since then the problem didn't appear any more.
I suspected S2U2 but I don't know if it was the reason.
farral
I have not made any changes except uninstalling SPB imageer.
CorruptedSanity said:
I have not made any changes except uninstalling SPB imageer.
Click to expand...
Click to collapse
Not sure what culprit is, but you could backup your contacts/emails etc, do a hard reset and see if problem still exists on bare rom. If it doesn't, install one software at a time, test if it works, then proceed with next app until you find possible culprit
I noticed that changing the patterns in calendar from "occur once" to any more complicated, like "from Tuesday to Friday" i.e. might be responsible for the problem. Few months ago I started to create more advanced remainders in calendar and after couple days it stopped remind me of any event.
I didn't notice where the problem was, because the problem didn't appear instantly but after 2-3 days.
Few days ago I tried to edit patterns and two days later the problem came back again.
Could someone investigate this issue on his own HTC to confirm the source of the problem, please.
Is there any update for calendar?
PS. Sorry for my poor English.
farral
Well after 2 days it went back to working by it self.
Its working fine now.
I do have 1 complex reminder. Basically it says remind me every 24th of the month for the coming 3 years
But thats still working normally.
It stopped again. I have not modified anything.
I had that problem too. The free app pmClean fixed it for me:
http://www.freewarepocketpc.net/ppc-download-pmclean-v1-06.html
You can set it to automatically repair the Notification Queue every day, which seems to fix the problem with reminders not triggering
alltruism,
I have Memmaid and used to find duplicates/dangling/expired/invalid and it found nothing.
Ill try the app you mentioned and hopfully it fixes it.
Ok in downloaded and installed PMclean v1.07 and i cleaned notifications. The first time I had like 27 and then after the cleaning it said 42. Then further cleaning just locked it at 42. Arent the numbers supposed to come down?
Anyway, I restarted and then tested. It worked, I tested again and it worked.
Wow thanks a lot Alltruism,but how come my Memmaid could not pick up on those Notification Que anomalies?