No longer getting Alarm notifications but Alarm vibrates/plays sound etc. and alarm is impossible to turn off - which gets very embarassing sometimes!
I am running Mortsaver - anyone else have this problem and, even better, a fix?
uninstalled Mortsaver - but still same prob. alarm continues even after a soft reset
I have the same Problem. Can someone help?
thx
warmkiwi99 said:
No longer getting Alarm notifications but Alarm vibrates/plays sound etc. and alarm is impossible to turn off - which gets very embarassing sometimes!
I am running Mortsaver - anyone else have this problem and, even better, a fix?
uninstalled Mortsaver - but still same prob. alarm continues even after a soft reset
Click to expand...
Click to collapse
Came across this the other day - might be of some help?
http://pocketpcthoughts.com/forums/viewtopic.php?p=420291&sid=9b3616d482786b00da3747a4fc84dbcd
Mike
Thnaks - I tried the battery thing but it didn't work for me. I finally fixed it by clearing duplicates in the Notification queue using Pocket Mechanic (trial download)
warmkiwi99 said:
Thnaks - I tried the battery thing but it didn't work for me. I finally fixed it by clearing duplicates in the Notification queue using Pocket Mechanic (trial download)
Click to expand...
Click to collapse
Now that's useful to know. But just a note of caution, I'm sure I've seen posts where people using pocket mechanic got into a lot of bother - I could be wrong though.
Mike
Related
I have a problem. The alarm time is not set, yet every morning at 9:45am, my alarm goes off. In the alarm program, no days are selected, and none of the 3 alarms are turned on. Why is this MDA beeping like crazy every morning at 9:45??? I've tried soft resetting, but for the past 3 days, it still goes off
djswivel said:
I have a problem. The alarm time is not set, yet every morning at 9:45am, my alarm goes off. In the alarm program, no days are selected, and none of the 3 alarms are turned on. Why is this MDA beeping like crazy every morning at 9:45??? I've tried soft resetting, but for the past 3 days, it still goes off
Click to expand...
Click to collapse
It had the same problem, I once set the alarm at a certain time, disabled the alarm but it kept going off each day. I was unable to find the cause of this.
It did not searched futher because I was intending to change firmware at that time, of course It was gone atfter that.
What kind of software are you using, maybe we had similar stuff running.
djswivel said:
I have a problem. The alarm time is not set, yet every morning at 9:45am, my alarm goes off. In the alarm program, no days are selected, and none of the 3 alarms are turned on. Why is this MDA beeping like crazy every morning at 9:45??? I've tried soft resetting, but for the past 3 days, it still goes off
Click to expand...
Click to collapse
you probably have some undeleted notification duplicate in Wizard's system and all you need is CheckNotifications:
http://www.scarybearsoftware.com/checknotifications.zip
run it on Wizard and look for entry which might look like your 9:45am alarm and delete it. should work.
I don't have much software installed. Just SPB Pocket Plus, XDA RegWizard, OpenNETCF, and Flash Player. It's pretty much stock other than a few skins.
EVA_D, again I run into problems. I'm a mac user, and we only use macs at the recording studio, so I can't install the .exe file. Can you possible install it on your computer, and then post a .cab file for me??
Ahh this is a nightmare....Luckily the past few days I've had to get up early, but usually I work til 2am, 4am, sometimes even 6am (At a recording studio), so a lot of times I don't fall asleep until 8am, and if I get woken up at 9:45 because of this, I will probably crush the phone in the palm of my exhausted hand...
anyone??
Here is the check notifications exe taken from my device - just run it on your device should work.
If that does not work i will post memaid to you from my device.
If nothing works then its hard reset time - then use a different alarm, see here http://forum.xda-developers.com/viewtopic.php?t=43692
That doesn't work. I emailed the exe to my phone, but it wont install. I need the cab file. Can you post the cab that is extracted from the exe?
Strange works on my device without a cab install.The exe is a standalone exe not an install exe. Sorry dont have cab for it
Ahh, I didn't realize it was an actual app, and not an install file. It's loaded up, and I have 472 events, which the app says is very high. So how does this work?? Am I supposed to clear ALL events??
Does the MDA store ALL the event information from the day it was turned on? It seems so because 472 seems to be a lot. Is this a bug on the MDA that may cause it to run slow? What (if any) are the effects of clearing ALL events? Will this basically be a reset pf the phone and require me to set up my mail, proxy, and other information again, or does it just deal with notifications and whatnot?
djswivel said:
Ahh, I didn't realize it was an actual app, and not an install file. It's loaded up, and I have 472 events, which the app says is very high. So how does this work?? Am I supposed to clear ALL events??
Click to expand...
Click to collapse
NO! not ALL! get into Options -> settings, check both boxes -> OK. then tap 'Clear' button on top of main screen. number of notification should reduce significantly (in my case it's about 15-20 after clearing). some notifications are essential for running system and should never be deleted.
Wow, 472? I think I have 13. You definitely need to do some spring cleaning there.
if i delete them ALL what is the end result?
djswivel said:
if i delete them ALL what is the end result?
Click to expand...
Click to collapse
i don't know but if you'll try, post back the results.
eva_d said:
djswivel said:
if i delete them ALL what is the end result?
Click to expand...
Click to collapse
i don't know but if you'll try, post back the results.
Click to expand...
Click to collapse
im not quite sure i have the balls for that yet lol
If you check both boxes and then delete it wont delete your important notifications just the duplicates etc....
eva_d said:
djswivel said:
I have a problem. The alarm time is not set, yet every morning at 9:45am, my alarm goes off. In the alarm program, no days are selected, and none of the 3 alarms are turned on. Why is this MDA beeping like crazy every morning at 9:45??? I've tried soft resetting, but for the past 3 days, it still goes off
Click to expand...
Click to collapse
you probably have some undeleted notification duplicate in Wizard's system and all you need is CheckNotifications:
http://www.scarybearsoftware.com/checknotifications.zip
run it on Wizard and look for entry which might look like your 9:45am alarm and delete it. should work.
Click to expand...
Click to collapse
i have the same problem but i cant find any alarm times - help!
Hi,
the same problem with my mini s, but new info. I remember that I have set a notification at 1:00PM someday last week, and it was good. after that, It keeps notifying everyday at 1:00PM and I cant find any entries in the notifications or tasks.
I used the program posted above, but it did not show any alarms set at 1:00PM.
Stupid wizards,
Any help?
taking the duplicates off certainly worked as no alarm this morning YAY thanks guys x
taking the duplicates off certainly worked as no alarm this morning YAY thanks guys x
Click to expand...
Click to collapse
mee 2, was waiting for the alarm at 1:00PM, but id did not fire today. Happy alarms!
Hey guys,
Anyone know of any new alarm clock programs out there that have a large snooze button so i don't accidently turn off the alarm like i always do now with pocket travel alarm?
Thanks
JW
When you say new, have you tried all the old ones already?
There are a number of good options out there...
Have a look through here and pocketpc freewares
http://www.pocketpcmag.com/awards/nominees_2005.asp
V
Alarm Application
Hi JW,
I'm using ptravelalarm 2.60 and never missed an alarm since i installed it. Great application.
regards,
Fast
Re: Alarm Application
fastguy said:
I'm using ptravelalarm 2.60 and never missed an alarm since i installed it. Great application.
Click to expand...
Click to collapse
I tried it for a few times and I do quite like it over the PocketWakeup, due to its (travel alarm) nice looking interface. However, I went back to PocketWakeup anyway. Reasons:
(1) Travel alarm does not include a vibrate feature
(2) There is always a thread/process of travel alarm running at the background, which I'm not sure if helps on my slow Charmer processing power and/or the battery life.
Re: Alarm Application
fastguy said:
Hi JW,
I'm using ptravelalarm 2.60 and never missed an alarm since i installed it. Great application.
regards,
Fast
Click to expand...
Click to collapse
I'm using that now and I always press the stop button on accident. So its not working out...
This is a good alarm & its free, never let me down yet. http://www.freewareppc.com/clock/alarmclock.shtml
Don't know of any new ones. I use the alarm from MortPlayer. It is very basic, but does the job. I can use my MP3 as the alarm. I had it fail once because my phone didn't recognize my media folder on the storage card. It wasn't isolated to MortPlayer so I can't blame it on the program.
innominate said:
This is a good alarm & its free, never let me down yet. http://www.freewareppc.com/clock/alarmclock.shtml
Click to expand...
Click to collapse
Yep, I've used that one too and have no complaints about it. It seems to work pretty well and has never let me down either.
I have been using MTUX AlarmX for a couple years. It isn't quite up to date (doesn't support landscape for example). And it's pretty basic (no MP3s, no repeating alarms) but then the interface is also simple. It is easy to set up to two alarms, alarm sounds, End or Snooze an alarm. I periodically try other programs, but always come back to this.
Hi Guys,
I'm having a love-hate relationship with my 3-week-old HTC Hermes.
Everything's OK except that I get a flurry of spurious reminders/vibrates over a 5 minute period when I soft reset the device (which I have been doing a lot while testing software).
I know that, historically, alarms and reminders on 'Pocket PC' devices have been a bit dodgy but this takes the biscuit! I have tried clearing dupes using the Scarybear utilities but this has not made a difference.
When the phone vibrates/pings, there's no pop-ups/messages to clear so it's not possible to tell what has invoked the reminder.
Apart from a hard reset, any ideas?
Thanks
linker3000
Did you ever get an answer to this one? - I'm having the same problem.
J
Me too! I had to do a hard reset!!!
I have this too. Sometimes checking for dupes with Memmaid helps. What's strange is that if you leave it for 10 mins it magically stops...
I always get it, and it always stops after about 10minutes. it started after i was trying to get the worthless alarm clock to work. I installed SBD Alarm (or whatever its called) and then realised that didnt work, so i removed it. never been right since.
SK Tools solved my problem:
http://s-k-tools.com/index.html?sktools/m_feat.html
Good luck.
J
Alarms..
Someone has already mentioned memmaid, but only for checking for duplicates.
You can actually look at the notification queue and see if there are any notifications that are for programs that you have uninstalled.
Don't just delete all the notifications - or anything like that.. as it can stop things working.
Charlie Grillo
JustinFe said:
SK Tools solved my problem:
http://s-k-tools.com/index.html?sktools/m_feat.html
Good luck.
J
Click to expand...
Click to collapse
what did you do? to solve it? install it (obviously), then what?
I ran the reg clean up and it disappeared after that.
It was the first time I have set my alarm to wake me up on my 8525. Needless to say I could not get the alarm to turn off. I have tried soft reseting and everything. Now when the phone restarts the red indicator light flashes and even without any alarms checked, the unit continuously plays the alarm over and over again with about a 15 second delay.
Has anyone seen this before? It is driving me insane!
I have the at&t rom and it has worked fine for over a month now..
What could it be?
Its a bug. I had the same issue on a previous AKU 3.x rom.
The only way I got rid of it was reinstalling my Rom...
I had it with a TyTN with factory supplied ROM (AKU 2.x). There was no dismiss soft-button, nor the menu to do anything; reset didn't help either. At the time, I just turned off the sound for notifications and hardresetted the phone in the evening.
Jörg
ironbear said:
It was the first time I have set my alarm to wake me up on my 8525. Needless to say I could not get the alarm to turn off. I have tried soft reseting and everything. Now when the phone restarts the red indicator light flashes and even without any alarms checked, the unit continuously plays the alarm over and over again with about a 15 second delay.
Has anyone seen this before? It is driving me insane!
I have the at&t rom and it has worked fine for over a month now..
What could it be?
Click to expand...
Click to collapse
Well, yes there are some known issues with the alarm. It may however not be necessary to go to the lengths of changing the ROM and doing a hard reset.
One of the most common issues is that the alarm notification store becomes cluttered up with duplicates and junk. (And this can happen regardless of whether you use the alarm much or not!!).
The standard way to clear the notifications queue is to use a third party tool and there are several but the best known are:
SKtools (Not Freeware)
http://www.pocketgear.com/software_detail.asp?id=14288
Memmaid (Not Freeware)
http://www.pocketgear.com/software_detail.asp?id=14279
Scarybear (Freeware)
http://www.freewareppc.com/utilities/notificationclearfix.shtml
Use any of these to clear your notifications cue. I personally like sktools as it has a host of other facilities well worth having - but the others are good too.
Mike
Is the behaviour of absent dismiss and menu buttons (the soft buttons) also the result of a messed up notifications queue?
I did have issues once where alarms went of twice at the same time, etc.; but at least I could turn them off when this occured.
Jörg
V J said:
Is the behaviour of absent dismiss and menu buttons (the soft buttons) also the result of a messed up notifications queue?
I did have issues once where alarms went of twice at the same time, etc.; but at least I could turn them off when this occured.
Jörg
Click to expand...
Click to collapse
Good question - and I do not know the answer for sure. The first two posters above do not say whether they get the dismiss option at all or whether they get the dismiss option but it just does not cancel the alarm.
That was the reason for my "caution" in replying and saying they "may" not need to change ROM or Hard reset.
Mike
Wow!
I just used scarybear and I had 899 items that were sitting there! That could slow down the old 8525 huh??? That seems like quiite the large oversight on the part of HTC does it not?
ironbear said:
I just used scarybear and I had 899 items that were sitting there! That could slow down the old 8525 huh??? That seems like quiite the large oversight on the part of HTC does it not?
Click to expand...
Click to collapse
Wow! indeed.
Question is will it now work correctly?
I wouldn't blame HTC for this one though, it's a M$ problem.
Hope it works, if not it's a hard reset next step. Mine had this problem but ok now after clear out. You may find you've claered out some notifications you do want. That's ok though you can reset them. Also if you ever restore from a backup you may need to re-clear the duplicate notifications.
Mike
mikechannon said:
Well, yes there are some known issues with the alarm. It may however not be necessary to go to the lengths of changing the ROM and doing a hard reset.
One of the most common issues is that the alarm notification store becomes cluttered up with duplicates and junk. (And this can happen regardless of whether you use the alarm much or not!!).
The standard way to clear the notifications queue is to use a third party tool and there are several but the best known are:
SKtools (Not Freeware)
http://www.pocketgear.com/software_detail.asp?id=14288
Memmaid (Not Freeware)
http://www.pocketgear.com/software_detail.asp?id=14279
Scarybear (Freeware)
http://www.freewareppc.com/utilities/notificationclearfix.shtml
Use any of these to clear your notifications cue. I personally like sktools as it has a host of other facilities well worth having - but the others are good too.
Mike
Click to expand...
Click to collapse
Thanks man u made my day
I suggest also free program to delete the Notification que one by one Or choose which to delete
Task Manager v2.7 (DFRunningApps)
http://forum.xda-developers.com/showthread.php?t=280104
Regards
great thread!
Had the same problem in my Wizard today and solved it thanks to this thread.
I used taskman 2.7 in Faria's WM6 ROM.
regards,
Scary Bear download link no longer works.
Any other free alternatives?
Thanks!
In the last couple of days, when I've had an alarm go off the sound has triggered, but there's been no onscreen notification, so I've not been able to dismiss it. It's turned on under sounds/notifications under "reminders".
This is really bugging me: in recent days I've installed batterytray and Calendar+ but no real reason to think it's related.
Anyone got a suggestion for what to check?
Ric
Download `scary bear check notification`
Fixed! Thanks
hanmin said:
Download `scary bear check notification`
Click to expand...
Click to collapse
Tried the free task manager from
http://forum.xda-developers.com/showthread.php?t=280104
and deleted duplicate notifications and all is well.
Is this a common WM5 bug then? Seems to have speeded my phone up a little...