Hello….
I have a big problem with my jam. So please can you help me:
My pda crashes during startup and stops on the blue imate screen. And that happened after I did the following:
The memory was too low but I found in the storage memory 7 MB and I wanted to install a game that was 7 MB too (note: I don't have a memory card) but the computer showed me the message "storage unavailable", but I installed it anyway and in the middle of installation the device stopped and when I made sofy reset it stopped on the imate blue screen and didn't continue starting. I tried to do Master reset (powerkey + resetkey) but the device refused to do it … I took it to a maintenance store and he tried to install a new rom but the problem continued "crashing during startup and stopping on the blue imate screen" (note: the phone was working fine before that)
so please cam you help me???
try a hard reset, but dont just tap it, hold the buttons in for a second.
sure thats it, if not im not sure
hope this helps.
Related
Tried to install PPC2003PE.nb1 but now can't use o2 at all!
What I did:
- call wallaby (v5.15) ->flash tools->CE+BOOT TO SD (ok)
- start XDArit.exe->READ FROM SD->test.nb0,testnb1
- start XDArit.exe->WRITE TO SD, PPC2003PE.nb1
Message:
XDArit: Failed to open device \\.\PhysicaDrive2
(I use WindowsXP.XDArit can't find SD?)
Next - I made mistake
- start RUUv1.09_CEv4.00.05wwe_O2_Ozone.exe when o2 was connected to PC (don't know why I started it...)
- during installation it stopped on 77%
Now:
-when wallarby starts GSM after WAIT message->GSM ERROR
-o2 starts very slowly and stop with blank screen only with keyboard and blue bacground in the top.
Can anybody help me?
You're experiencing a bug we'll be looking into once we have some time. You should try the old XDArit to write your card. Given that your bootloader still works, you should be fine after you burn your old ROM back into your device, although I'm not sure what the 'GSM ERROR' is all about.
Thanx! Old XDArit.exe works good.
But after restore nothing changed in o2.
Still message GSM ERROR in wallarby and blank screen after reset. Probably Radio Unit corrupt.
Installed PPC2003PE.nb1.The batary is totally discharged,GSM doesn't work, after reset system starts~15min,no signal about charging.
How to charge o2-maybe it is the only problem?
Finish!Installed RUUv1.09_CEv4.00.05wwe_O2_Ozone.exe which can start without power control.Works fine!
Can you share RUUv1.09_CEv4.00.05wwe_O2_Ozone.exe with us?
ruuv1.09.... is the same as rsu-v4.21
nice that they keep changing how files are named.
http://www.sourceo2.com/NR/rdonlyres/e6cnrtrwu7je7z4igecipun72rzqqbftxrz5dch75i64qjawvtwmmvt64qqrxanxkdcwcapvo5aupj4wt6hc52vtlhe/RUUv1.09_CEv4.00.05wwe_O2_Ozone.exe
(mods i would appreciate if you could make this a sticky for people... ive worked long and hard trying to get this thing working again)
Ok so heres what happened to my XDA which proberly happened to yours.
I went onto the 02 site and got the latest radio stack upgrade for my xda, but i didnt have the sim in my device so once it finshed and restarted the xda it crashed because there was no sim in it. So i hard reset it.
Causing it to hang on the boot screen showing the G & U letters on the side for about 4 minutes before booting to a blank screen with the keyboard icon in the corner.
*** Please remember at the moment my status LED isnt working showing there is no battery (but still booting etc - P.S i have installed a new battery - no diffrence) ***
Heres how to get it working...... remember that everything takes longer because the XDA lags like mad.
Ive created this guide myself ive took nothing from anyone else info ive done this from scratch, it will need to be done everytime the machine runs out of power (hard resets).
---------------------------------------------------------------------------------
* when i put " + " it means AT THE SAME TIME e.g button1 + button2 = keep pressing them at the same time.
** I refer to the directional keypad centre button as the "OK" button.
Make sure you have the correct RSU Version from here :>
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Download it and put the files onto an SD card.
1. Boot up the device
2. keep pressing the OK button + volume button until it shows the today screen, please note there will be no titles on the screens, HENCE NO START BUTTON.
3. Then press the contacts button + THEN OK a few times, then press the OK button this should bring up the start menu
4. CLICK programs, file explorer, select the SD Card. Then Copy RSUPGRAD.exe to : my device > windows>start up.
5. Copy the remaining 3 files to the : my device > windows
6. Soft Reset Device
7. Click on start (on the upgrade util) it will then restart the device because theres no LED for the battery (hence the 1% then fail).
8. Once started it should then start up as it did when it came out the box giving you the windows setup screen.
9. Go into file explorer and delete tha flas util file from the startup.
Thats it!
- Remember if you hard re-set the device again it will need to be re-done, i dont know how to solve this problem LONG TERM, im giving my XDA to 02 to fix it...... been as its there screw up.
----------------------------------------------------------------------
Thanks Everyone
James
Does this actually flash the gsm radio? If it does then why does it need reflashing following a hard reset?
No it doesnt re-flash it.............
All i know is that it fixes it and many people have had the same problem but had no replys so id thought id help them out :roll:
Where are he diffreneces to the instrucions on wiki????
Stefan
huh? so your saying someone has already written the instructions?
Do you have a link? it will be intresting to find out how i can get my LED working again so the system will be able to work once more.
EDIT: IF THE BATTERY LED/STATUS IS UNKOWN (as in my case)
"Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery. "
Does not apply to you............... hence why my guide overcomes the one on wiki.
If you have had the situation happen to you, then you would undertsand.
would it be possible to use the xda developers 1.2 special edition ROM instead of the 1.1 version for this procedure?thats the only rom i seem to have found.
Boogie, I think you need only the radio stack not the rom if I read the post correctly. The special edition rom contains NO RADIO STACK.
That´s not 100% correct. I´ve noticed, that some ROMs wouldn´t boot up so that you can follow the procedure.....
Stefan
hey guys this is my 1st post to this forum, but for the last year or so I've found it very helpful.
I was experiencing this same issue it would just boot up and hang on the welcome screen for what seemed like an eternity. I gave up and just left it booting up and finally the today screen came up. This is what I tried and it worked. All of this was after a hard reset when I tried to upgrade the radio stack and it fell into this infinite loop of 1% and fail and reboot. I had read a couple of the procedures for doing a radio stack upgrade but here is some of what I did.
In one of the procedures it says to copy the files to ur ppc windows directory and to copy the exe file to ur windows startup directory. I figured I would bypass that in some way. After I finally got to the today screen and used my pc to copy the files to the sd card, I copied all the files to the windows directory on the device and ran the exe file from the windows directory. It worked like a charm and my ppc was back to life. It no longer took for ever to get passed the welcome screen. I hope this helps some of you that have this issue
"No Program Memory available. Tap Start > Settings > System Tab > Memory, stop programs that did not automatically stop, and try again" :!:
Did you ever seen this message on your PPC?
This problem appeared by itself.
Hard Reset doesn't take effect. No programs available on my device, while memory is not full.
( How it can be full after Hard Reset ) Start > Programs - unavailable, but Start > Settings - works.
All programs don't open.
I tried to flash my device from original ROM to newest 1.72.00 WWE.
I did it, but it doesn't take effect.
I see the same message on the screen.
Of course my device works after Hard Reset, but when I make first Soft Reset or
Auto-reset, when installing program, this message appears again.
Now I don't know what to do. If someone confronted with this problem... help me please! :?
Dead Issue :? I don't beleave...
...
Maybe is your ROM Image that you are using damaged. Maybe... Try to use another one: 1.75 is the newest version of 2k3 or the best version for 2k3SE is v2.06(my recommendation). I know and I believe,that all problems can a hard-reset solve(well,the most problems) while is a good ROM Image installed.
Hi all,
When i used my device this morning i could not start messenger or any other program. The device is also unable to connect with active sync. I haven't got anything installed over the last days.
It just happend. Windows is extremly slow, i don't have contacts anymore, no pim's or anything. The phone did remeber my last calls and such. My email accounts are also missing.
I have done some soft resets and now the device is stuck on the windows mobile splash screen (the green screen with windows logo and name).
I don't know what to do How can i get my device to work again?
Edit
The device has started after 20min at windows screen. Touchflo 2D has not loaded and i can not make calls. I can't start any program, it gives an error that the program can not be started because it has not been signed with a certificate or some component is missing.
Thx in advance for reading.
If you have an SD card inserted I would try removing it and see if that improves things!
I had a similar problem with an Xda Zest which turned out to be a corrupt SD card. Once it was formatted again everything was bach to normal.
I removed the SDcard, tried another one (also 4GB), then used the old one again (formatted) .
But no luck.
I will try again removing some software if the device allows it. Will update.
dont put any SD card in the device
and try
Start/configuration/sistem/Erase memory
and there just put 1234 and press yes
This metod erases everithing from your device leaving it just how it came from the factory
You may also perform a hard reset as you have mentioned to receive a message "some component is missing". Hard reset should fix any software (or Operating system) issues with your phone.
WARNING: Hard reset will erase all your data and the customizations you have made to the phone.
Refer to the following for instructions on how to hard reset:
http://forum.xda-developers.com/showthread.php?t=453324
I have done a hard reset without the SD & sim card. It solved all the problems. I was able to recover my contacts with ActiveSync.
Thx all for helping
Earlier today, the OS on my phone crashed as I was receiving a text message. The phone simply froze up. I tried to do a hard reset, but nothing happened, so I removed the battery, waited several seconds, and put it back in. When I turned the phone back on, the OS did not completely start up. In stead, I received the following error messages:
Storage Memory
"Storage memory is critically low. If the storage memory is not increased, other programs may not be able to start. Use File Explorer to delete files that are no longer needed or move some files to a storage card."
Connection Setup
"Error in the database"
"The file '---' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
I attempted to connect the device to the computer in the hopes of simply flashing the ROM, but ActiveSync will not even connect to the phone. That being said, is there a way to reset the phone to a previous state so that I can access it? As it stands right now, I can do absolutely nothing on the phone, not even get into the Start menu. The phone does not work, either, as I cannot send or receive any phone calls.
Help please... anyone...
Full device name: HTC 8525 AT&T (unlocked for T-Mobile)
OS version: WINDOWS MOBILE 6.5
RAM: Total, 64MB
ROM: Total,128MB
When all else fails try the search function.I believe you will need to flash a new ROM from the SD card.Perhaps a more knowledgeable member can verify this,however i think it will help you out.The first is a link to the Wiki for SD flashing a Hermes,the second is a link to the search results,via forum search, for SD card flashing.
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
http://www.google.com/cse?cx=000825...flash&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
Good luck
press the top two buttons in together and keep them pressed ,then reset with the stylus at the same time. You will get a tri coloured screen (Bootloader mode)with your ipl and spl on it and it will say serial at the bottom. If it says spl x.xx olipro then flash any hermes rom to it, if it doesnt then find a rom from the manufacturer of the hermes i.e. if its a o2 trion get an o2 trion rom. When you have the rom downloaded simply connect it to the pc as you normally do and run the flash program. Dont worry about the parts of the rom flash where it says have you an active sync connection, just tick the box that you have and carry on with the flash do that and your phone will be working again, hopefully
Much thanks
Many thanks, all
I managed to get everything reloaded, although all of my personal information is gone now... oh well, a small price to pay, right?
Why didn't he just do a hard reset...