People,
For a start - i am a fresh newbie and dot have any experience at all in ROMS.
I have read all threads on this tree but decided to do it anyway - just for the fun and experience...
I DIDN'T succeeded on upgrading my jam to wm6 but maybe you will be able to tell me why.
I have download a JasJAR wm6 update and started to play with it a little.
For a start , i have put the Last 113 update(MA_TMNL_11300_132_11200_Ship) and the new wm6 Nk.nbf file together in the same folder - and started the NOid upgrade, for my (very hough )surprise - the upgrade process went exactly like from 112 to 113 meaning all 3 stages from 113 to 2.25 - my heart pumped up for about 30 min until the upgrade completed(64M) - after that all i got is the USB\Serial boot loader.
Is this a stage someone have reached?
If the image could uploaded but couldn't boot - can this be fixed via hack ?
PS - all this started when i wanted the new SPB shell application since it is a very cool looking but works only on WM5...
Thanks
Roy
That's realy interestig... =) Did you tried to upgrade to WM5?
Nope - i didn't reach this stage in WM5....
this thing started when i download the WM6 from mininova...wanted to play with it a little bit.
i tried the original ROMUpgradeUt.exe and it gave me a JAS JAR picture with model number - then i tried the NOid.exe and it gave me a Magician picture with its model number!!! -from there the road was short to try what i did in the above..
what link of file you've been downloaded?
http://www.mininova.org/tor/633101
...for O2 Xda Exec [HTC Universal]
pickiki said:
http://www.mininova.org/tor/633101
Click to expand...
Click to collapse
Have you read Comments....?
http://www.mininova.org/com/633101
same problem sort of
ive got the same phone and when i tried upgrading to wm5 i incountered the same problem, it now wont do anything no matter what i do soft reset, hard reset, take the battery out for an hour. it is stuck in a boot loader screen so i think it might be salageable. but cant find original 2003 windows ver. and cant get it to connect with activesync. although when i do connect it, i do get a connection via usb and get the sound confirmation and pop up. if anyone could help or give me any suggestions it would be great.
Hello!!! =) I've tryed to upgrade to WM6...=) So now it's a brick.. -) I've bootloader screen with word "Serial" and i can't get usb connection.. -(
If someone know how i can resurrect it? =)
=)... 2 hors later it came back! IT'S ALIVE!!! =)
No.. it was jast glitch... -( When i connect my mda to PC and make reset, it shows Usb, but when i disconnect my device, it still shows usb... -(
*lol*
Your "english" just reveals that you're unable to comprehend what has been written so many times before. It's a shame.
Well if it’s any constellation at least you can use your phone to hold down important papers on a desk.
! why are you putting a JASJAR rom on a JAM?
Of course you'l brick it!
And there is NO WM5 OR WM6 COMING EVER FOR THE MAGICIAN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
go and flash the original ROM and never come back on XDAdev
omg im laughing so hard i can hardly post.
st3v3 said:
omg im laughing so hard i can hardly post.
Click to expand...
Click to collapse
Same with me (except for these few words)
Related
:? i just tried to upgrade to radiostack 6.24 ... AND WHILE UPGRADING IT STOPPED @ 16%, AND NOW IT W LOAD UP AT ALL AFTER A SOFT & HARD RESET...what em i posed to do??? :!:
any one?...my $300.00 paper weight needs help
is there anything i can do with wallaby bootloader....i dont have anything else.................
JUICEe said:
:? i just tried to upgrade to radiostack 6.24 ... AND WHILE UPGRADING IT STOPPED @ 16%, AND NOW IT W LOAD UP AT ALL AFTER A SOFT & HARD RESET...what em i posed to do??? :!:
Click to expand...
Click to collapse
Can you please explain how you did/started the upgrade?
Yes, $300.00 paper weight !
you could get it fixed (hardwire repair)
Qman said:
JUICEe said:
:? i just tried to upgrade to radiostack 6.24 ... AND WHILE UPGRADING IT STOPPED @ 16%, AND NOW IT W LOAD UP AT ALL AFTER A SOFT & HARD RESET...what em i posed to do??? :!:
Click to expand...
Click to collapse
Can you please explain how you did/started the upgrade?
Click to expand...
Click to collapse
copied the files ( monitor_ul_bs.m0, monitor_ul_bs.map, RSUpgrade.cp64, RSUpgrade) to windows dir, executed the rsu upgrade...uprgade started....2%....10%....16%...16%....16%....so i reset it, an thats where Im @
(i had the I had it cradled, connected to usb & power during it all)
Yeah, that's exactly what I did. I noticed you did a hard reset, which is also what I did. That may have been the death blow.
First of all, do not do ANYTHING in the Wallaby bootloader. If you start messing around in there, you're done.
Plug your phone into the power cord (even though the battery won't charge now, the phone will stay powered if you keep it plugged in).
Try to get the RSU files for the version you initially upgraded from (6.18 for the default T-mobile, or maybe 4.21 like I had from a 4.00.05 ROM upgrade package). Load those files into the Windows directory and then try running them.
Just FYI, I did a hard reboot and changed ROMs several times. I also messed with all kinds of GSM settings in the bootloader. In the end, my phone was toast. Unrecoverable. Fortunately, I got mine from T-mobile and they did an exchange. With my new phone, I'm just gonna wait for the official RSU before I try changing it
ok...too late about the Wallaby thing, that was the 1st thing i was messin with, wen i first loadit it it said "wait" 4 a looooong time, then finally said "gsm error"....but i started playin with it, an tried every option on there, but nothing happened @ all.
2nd: i cant load any thing into windows, because the xda never boots up, just sits @ the 1st screen
so i figured im gona have to get a usb r/w and a SD card :shock:
should i use XDArit.exe or XDAtools.exe
im i gona have problems, i think i have Wallaby 5.17 :idea:
JUICEe said:
Qman said:
JUICEe said:
:? i just tried to upgrade to radiostack 6.24 ... AND WHILE UPGRADING IT STOPPED @ 16%, AND NOW IT W LOAD UP AT ALL AFTER A SOFT & HARD RESET...what em i posed to do??? :!:
Click to expand...
Click to collapse
Can you please explain how you did/started the upgrade?
Click to expand...
Click to collapse
copied the files ( monitor_ul_bs.m0, monitor_ul_bs.map, RSUpgrade.cp64, RSUpgrade) to windows dir, executed the rsu upgrade...uprgade started....2%....10%....16%...16%....16%....so i reset it, an thats where I'm @
(i had the I had it cradled, connected to usb & power during it all)
Click to expand...
Click to collapse
Ok you're still in good shape just try re-copying the files over and run RSUpgrade again, but what ever you do don't install the 4.21 Radio stack upgrade!
BTW I never upgrade my radio stack while my device is connected to my PC, I always disconnect and use the AC adapter.
HTH
Qman said:
JUICEe said:
Qman said:
JUICEe said:
:? i just tried to upgrade to radiostack 6.24 ... AND WHILE UPGRADING IT STOPPED @ 16%, AND NOW IT W LOAD UP AT ALL AFTER A SOFT & HARD RESET...what em i posed to do??? :!:
Click to expand...
Click to collapse
Can you please explain how you did/started the upgrade?
Click to expand...
Click to collapse
copied the files ( monitor_ul_bs.m0, monitor_ul_bs.map, RSUpgrade.cp64, RSUpgrade) to windows dir, executed the rsu upgrade...uprgade started....2%....10%....16%...16%....16%....so i reset it, an thats where I'm @
(i had the I had it cradled, connected to usb & power during it all)
Click to expand...
Click to collapse
Ok you're still in good shape just try re-copying the files over and run RSUpgrade again, but what ever you do don't install the 4.21 Radio stack upgrade!
BTW I never upgrade my radio stack while my device is connected to my PC, I always disconnect and use the AC adapter.
HTH
Click to expand...
Click to collapse
I figured that having it connected to usb was a bad idea, i just wasn't thinkn :roll: ...but how am i supposed to copy the files when i cant load up the XDA, and even when trying to connect to active sync, while the XDA is sittin, froze, on the boot screen- active sync doesnt recognize :|
Qman said:
BTW I never upgrade my radio stack while my device is connected to my PC, I always disconnect and use the AC adapter.
HTH
Click to expand...
Click to collapse
What ? I'm surprise!
JUICEe said:
I figured that having it connected to usb was a bad idea, i just wasn't thinking :roll: ...but how am i supposed to copy the files when i cant load up the XDA, and even when trying to connect to active sync, while the XDA is sitting, froze, on the boot screen- active sync doesn't recognize :|
Click to expand...
Click to collapse
At this point I suggest that if you have an PC card SD card reader reload
the OS and start over with the radio stack upgrade using the same upgrade method but this time upgrade to the AT&T radio stack because
its less likely to fail than the T-Mobile stack.
Also after the OS reload you would have to copy the needed radio stack files from your PC to your SD card then move them to your devices Windows folder.
BTW what radio stack were you upgrading from?
HTH
...AT&T radio stack because
its less likely to fail than the T-Mobile stack.
Also after the OS reload you would have to copy the needed radio stack files from your PC to your SD card then move them to your devices Windows folder.
BTW what radio stack were you upgrading from?
HTH[/quote]
IM NOT SURE BUT I THINK IT WAS 6.18
WILL THE ATT STACK WORK WELL ON MY T-MOBILE SERIVICE?
AND IM CONFUSED ABOUT HAVIN 2 HAVE TO COPY FILES TO THE SD THEN TO THE XDA...1ST, BECAUSE I NEVER USED AN SD W/R OR ANY OF THE SOFTWARE NEEDED TO USE IT, AND IF I RELOAD THE OS, CANT I JUST BOOT UP AND COPY THE STACK FILES THRU ACTIVE SYNC? OR WILL THE DEVICE STILL NOT BOOT UP ??
BTW:THANX :!:
JUICEe said:
...AT&T radio stack because
its less likely to fail than the T-Mobile stack.
Also after the OS reload you would have to copy the needed radio stack files from your PC to your SD card then move them to your devices Windows folder.
BTW what radio stack were you upgrading from?
HTH
Click to expand...
Click to collapse
I'M NOT SURE BUT I THINK IT WAS 6.18
WILL THE ATT STACK WORK WELL ON MY T-MOBILE SERVICE?
AND I'M CONFUSED ABOUT HAVING 2 HAVE TO COPY FILES TO THE SD THEN TO THE XDA...1ST, BECAUSE I NEVER USED AN SD W/R OR ANY OF THE SOFTWARE NEEDED TO USE IT, AND IF I RELOAD THE OS, CANT I JUST BOOT UP AND COPY THE STACK FILES THRU ACTIVE SYNC? OR WILL THE DEVICE STILL NOT BOOT UP ??
BTW:THANX :!:[/quote]
Yes the AT&T radio stack will work on your T-Mobile and its the one I use and recommend.
As far as reloading your OS from the SD card its what we call the SD card boot loader method and is by far the best way to upgrade your OS. Do a search on this forum for more info.
Yes your device will boot but since your radio is blown Activesync most likely wouldn't connect.
HTH
ok, thanks again...i guess im off to buy the reader/writer, and the card, from walmart, or radio shack whichever is cheaper...( DO I NEED A 64MB CARD, OR CAN I GET A 32MB?)
I'll repost after halloween, since i gota go to sum partys an release all my xda induced stress with good old friend beer
btw, lol, my girlfrien seen my xda while i was tryin to repeadidly boot it up, & as it was froozen on the boot screen, i have "rom is cooking" bootimage, an she was all " i guess u did fry ur phone" :shock: :twisted:
....so with XDAtools OSImagetool, will i be able to copy the r stack?
is the target x:\windows\
that easy?...god i hope :?
Yes you'll need at least a 64MB SD card.
BTW Fry's had one on sale earlier this week for $22.00.
HTH
re radio stack upgrade
I've been following this thread re radio stack upgrade to TMO. I have RS6.18.00 currently and see 6.24.00 at yorch.net's web site under upgrades. Questions:
1. Do you copy the 4 upgrade files to the /windows folder on the PDA to run the upgrade?
2. My phone is working fine with ROM4.00.21 and RS6.18.00, should I upgrade my radio stack to 6.24 or wait another month or two for TMO's offical build?
Kind of nervous given the threads I've read. btw, I bought a SD card reader/writer & flashed ROM via bootloader/XDATools method. Worked well.
Craig
Re: re radio stack upgrade
cshields1 said:
I've been following this thread re radio stack upgrade to TMO. I have RS6.18.00 currently and see 6.24.00 at yorch.net's web site under upgrades. Questions:
1. Do you copy the 4 upgrade files to the /windows folder on the PDA to run the upgrade?
2. My phone is working fine with ROM4.00.21 and RS6.18.00, should I upgrade my radio stack to 6.24 or wait another month or two for TMO's official build?
Kind of nervous given the threads I've read. btw, I bought a SD card reader/writer & flashed ROM via boot loader/XDA Tools method. Worked well.
Craig
Click to expand...
Click to collapse
I suggest upgrading to the AT&T Radio Stack first it has a higher upgrade success rate IMHO or just wait on the official T-Mobile lease.
As fas as how do you copy the files over, you can use Activesync Explorer or use your PC's SD card reader to copy them to your SD card then copy them from there.
HTH
back & hungover...
so i got me a sd reader & the card.....copyed 4.00.16 to it (b4 had 4.00.05 i think) loaded it via wallaby, everything looked fine (except my battery was practically dead, i had to race to get it off the charger reset and put it back on the charger) so the os was copyed fine, and wallaby told me to cold reset (that did mean a "hard", no?)...so i hard reset it, then after a few mins i stuck the pin bak in the lil ass hole, and nothing happened :evil: so i put it bak on the charger, an the boot screen appeared, with a new image and on bottom of screen it sed 4.00.16 ..........but then it just sat there, like b4 and wut i noticed, that i didnt mention b4, is wen its booting up, 1st shows the "4.00.16" then sits there for like 2 minutes, then pops up a "G" & "R" above the "4.00.16" respctivly.....
and i left the device on charger 4 a while, and tried to hard reset again and still wont boot after 2nd pin push :?: :?: :?:
and another thing i didnt mention b4, wen loadin wallaby, it sez gsm error, or did i mention that
i had an idea, maybe to install an older os 3.xx.xx??? but it seams the problem is the gsm wont load, or isnt ther, or damaged, i dont know, how can i load a working GSM on it :shock:
G'day All,
Got an XDA I here that's giving me the "white screen of death" It will start into the Bootloader (5.15) with the Action/Reset/power combo - But comes up with "GSM Error" which I understand means that the Radio Stack has died.
Ironically, this has actually occurred without playing with this unit at all!! (Just normal service!)
Does anyone know of a technique (SD card or otherwise) to restore the Radio Stack and get past this problem?
Cheers!
Andy
I just fixed a unit yesterday that had the same problem.
What I did was keep pressing the record & Contacts buttons until the welcome screen came up after that was completed. (Note this went on for
about 10 min.)
I then connected it to my PC logged on as a Guest via ActiveSync the used ActiveSync Explorer and copied the needed Radio Stack files over in the Windows root folder and ran the RSUpgrade.exe and reinstalled the Radio Stack. Your success rate may very.
Needed Radio Stack files:
RSUpgrade.exe
RSUpgrade.cp64
monitor_ul_bs.map
monitor_ul_bs.m0
FYI not knowing what OS was on the unit I upgraded it first to the AT&T pre-release WM2003 thats available on MPX200.org via the boot loader method and then used the included A.33.01 RS files to reinstall the RS.
BTW the link to the above pre-release can be found on the front page of this forum.
Good luck and HTH
Hi, i've tried extracting the files and i've got:
Orilgsm.005
000setup.999
MONITO~1.002
MONITO~1.003
RSUPGR~1.000
RSUPGR~1.001
RSUPGR~1.004
What can i do to get the four files u suggest?
Ta
MJ
Recovering from a cactus Radio Stack
Thanks for that..
Catch is though that the unit doesn't want to present a "Welcome Screen".. or boot into PPC? Just a white screen with blue strip at the top and the keyboard selector at the bottom right.
ActiveSync won't recognise the unit either...
You mention "Record / Contacts" buttons.. Could you possibly give me more details on this? If I can get the unit talking with ActiveSync again, then all should be fine reloading the Stack.. But it just doesn't seem to boot properly...
Any thoughts greatly appreciated!
Cheers.
Andy
looks like you're extracting em on a filesystem that can only handle 8.3 filenames, like dos etc
try in w95 - xp or on a mac
maltloaf
You need to either extract the hole ROM upgrade file
or run it, once its finished 'unpacking' the files cancel out of it. It should leave everything in place in C:\Program Files\SX56 upgrade utility\english
HTH
i also have the same problem as this.
some people tell me the radio stack can not be fixed.?
i cant see why if u can flash the rom...
if u get this fixed id love to know.
djkus said:
i also have the same problem as this.
some people tell me the radio stack can not be fixed.?
i cant see why if u can flash the rom...
if u get this fixed id love to know.
Click to expand...
Click to collapse
Call it luck, I worked on one a fews weeks ago for days without success!
my xda mini isn;t booting o starting up, im gettin continues beep..pls guys tell me wat to do!!!!!!!!!!!!!!!!!!!!! :?:
Try it again
http://forum.xda-developers.com/viewtopic.php?t=29266
still da same...same continues beep even wen i connect it to da adaptor...ne other solutions????? :roll:
I pulling at straws here but is the battery charged? I had that problem with a palm once.
ya battery is charged..i duno wats going on here dude.. :?:
how about just hardreseting it??
buzz
did all resets i can do..nothin workin here
My iMate JAM was going perfectly fine, it also had the latest WWE ROM, no issues. Now for some reason, I download from www.pocketgear.com and install the trial version of "Pocket Mechanic" which also installs "Pocket Hack Master 2005". While trying out Pocket Mechanic, I use something called "registry cleaner" which is supposed to cleanup any incorrect/unused registry entries. After this I try "Pocket Hack Master 2005" which is a software to test the CPU speeds. As soon as I run this program, the screen freezes and my phone is dead. I try and reboot the device, but it is stuck at the blue boot-up screen. I am unsure whether my PPC died because of registry cleanup or because of "Pocket Hack Master 2005" software.
Anyways, now, I decide to re-install the WWE 1.12 ROM and start using the device. But, no luck, on the PPC - the blue boot-up screen does not go away and on the installer screen - "Checking information on your device... Please wait...." and is stuck.
I think the device is not booting up and hence is being not recognised by the PC as a USB device.
Please help... I am dead...!!!! Any safe boot options, anything at all?
At least ur gettin sumthin on ur ppc...b happy ranjanrishi...nothin on mine..just da continues beep :roll: if u found a solution plz share it wid me....thanx in advance dude..
check in the "upgrading" section of the Magician forum, there might be more answers there.
I am new of the forum, I have just purchased a nm8 used magiacian (t-mobile MDA) it is I bring a problem.
The preceding owner has begun an updating of the rom that has not gone to good end and the device doesn't now set out anymore and from the following error:
USB V1.00 (if connected USB).
Serial V1.00 (if disconnected).
Bootloader mode ?
What must I do for going on?
I hope in a help
Best regards Luca
help
I pray you helped me, the first post is from beginners, but believe I have followed the standard procedure.
unloaded the rom
unloaded no-id
always tried upgrade more times failure.
HELP !
for the beginning you should use a standard ROM to get familiar with the device.
just go to the t-mobile website, downloads, chose your device type and then look for files named softwareupdates or so.
they will be in zip-format.
there will be an application in there. just go into bootloadermode, connect your device and start the upgrade. it's completely guided and will last about 20min.
although most of the ppl that read/write in this forum didn't install the eROM, I think you can start with all the cusomization stuff. If you have become more familiar with your mdac, you can try other modified ROM's.
just ask if you have more questions
greetz Stefan
i have to say that using standard rom (jam rom downloaded from club imate)
the upgrading applications hangs.....
and leave magician in booting mode, ready to be erased....
i was desperaded, but last experiences with motorola phones and its firmwares advice me to try again
so i had to launch againg that apps and it starts erasing actual rom....
i think there is a bug in few roms.... may be only in its installer
Have tried with the T-mobile rom but doesn't even go with that!
Caslu,
Have you tried a hard-reset?
If so: I guess you've got a decent TMO magician rom downloaded. So get maupgradeut_noid.exe from the ftp. Extract all the files from your TMO shipped-rom & put them in a directory, so you get some .nbf files, enterbl.exe & maupgradeut.exe. Now put the maupgradeut_noid.exe in the same directory. Connect your magician to the usb. It should read usb v1.00, if your magician isn't in bootloader press camera&power&soft-reset at the same time for a few secs. till you get the usb or serial reading.
After connecting it to the usb execute the maupgradeut_noid.exe twice, first execute might give an error 120 second should finish.
If this fails make sure you got a magician & not a charmer.
If it's a magician return it, cause I think it's broken. Hey why buy a device that's in an inconclusive state??
Regards, M
I think really that It broken.
Have picked it because little cost!
non one reply .......
caslu said:
I think really that It broken.
Have picked it because little cost!
non one reply .......
Click to expand...
Click to collapse
Download the latest shipped ROM for the country your magician was first sold in.
Ensure Activesync is in the normal mode (USB check is ON).
Run the executable ROM update program.
Hi can anybody help i have a 6915 tht i have tried to upgrade from spannish to english .Everyhing seemed to go fine but at the end had to hard reset now its stuck on hp logo screen. Now i have tried various fixes for this but to no avail. I cannot even connect to it via activesync.ive tried leaving battery out all night.Ive also tried the uni_exitbootloader but as i said before i cant even connect to it.Is there any other way of connecting apart from the cradle?Ie
perhaps some sort of serial cable or perhaps booting from sd card or something.I really am fed up as you can imagie as i think i now have a 600 euro paper weight lol.
Anyway if anyone can help or pehaps point me in the right direction it would be really apreciated .phil.
no joy
its still the same has anyone else had this same fault.
regards phil
Yup.... mine is also stuck on HP logo.... nothing is getting the sucker out of it at the moment...! If i manage to get it goin, ill let u know.... but if anyone else knows a way around this...... PLEASE let us know! Havin major hassles getting mine to an english OS......
help still
anyone have an answer to this or is it a brick regards phil
Follow these steps and should be fine:
1.Battery up 70 % charge;
2. Pull and try one of these archives:
http://rapidshare.com/files/79905049/_Sable___G3_DEVICE_ONLY_hw6915-1.21uk.rar.html
http://rapidshare.com/files/154798440/HW6915_ROM_FOR_G4-121UK_.exe.html
3.from folder delete CEBL.nbf, RadioFS.nbf, RadioOS.nbf, and view picture from attachmend.
4.Аnd you should be happy with the restored 600 $
Good luck
Need help
I fail ungrade OS
I got stuck in HP logo and not connected ActiveSync
I think i must boot from mini-SD card.
Please someone help me!!!
WOOOHOOOO
Heya!
The repair above worked.... ALTHOUGH.... no GSM tho... at least i got my 6915 back up AND IN ENGLISH! THANK YOU!!!!!!!!!!
Sulphy said:
Heya!
The repair above worked.... ALTHOUGH.... no GSM tho... at least i got my 6915 back up AND IN ENGLISH! THANK YOU!!!!!!!!!!
Click to expand...
Click to collapse
Hi Sulphy! How did you get that? Mine stuck on HP logo too and can't connect to Activesync, any PERTICULAR way to connect?
3circles said:
Hi Sulphy! How did you get that? Mine stuck on HP logo too and can't connect to Activesync, any PERTICULAR way to connect?
Click to expand...
Click to collapse
Heya! Ok, what i did was the following,
1: hold down the 2 function buttons on either side of the joystick (NOT the call answer and call kill buttons, between them )
2: while holding the buttons down, use the pen and press the reset button at the bottom of the phone.
You should now have a bootloader screen, with an HP logo, and SERIAL or USB line of text at the top, and a G.39 version text at the bottom of the screen....
Activsync need not be connected at this stage, just your USB cradle or cable....
3: Download and extract the _Sable___G3_DEVICE_ONLY_hw6915-1.21uk.rar file from above... remember to delete the files from folder - CEBL.nbf, RadioFS.nbf, RadioOS.nbf..
4: run the sableRUU.exe ... this will now install the CE OS in english....
mine has been in brick phase for weeks now, its the first time i managed to get the OS back up! Now i need to sort out the GSM problem....!
Hope this helps!!!
Thank you guys
It worked!!!!
I change it English too
Thanks a lot!!!!!!!!!!!!!!!!!!!!!
Hi Sulphy,
Many thanks for your guide! Mine ok now!
You are really a good man!
whooooooooo hurrraaaaaaayyyyyy
tried it and it works 100% even radio . You dont know how happy i am .regards phil. Thanks spgi
Same Programme for HP 614C Posible?
My HP 614C not boot SD Loader not Works
Any GSM fixes yet??
Hey people¬!
Glad to hear that some got thier phones back and workin.... although, has anyone got the NO GSM sorted yet please? I have tried a few 'fixes' out on the forum to no avail!
please let me know if you got your GSM sorted.....
As for the 614, i dont think this fix will work.... i dont have a 614, so cant help out much there....!!!!
If i get my GSM sorted, ill do a full rom dump and post.....! So, anyone, please let us know!!
Cheers
Sulphy
Flashing
If you do not know what you are flashing, do not flash it. Do your research before you flash anything.
We have alot of hw69xx bricks because of this, including mine.
I have to this day only fixed 2 "NO GSM" phones, I am asking anyones help to fix others.
Post in my thread "OFFICIAL hw6900 NO GSM FIX FOR SOME PHONES / WM 6 PORT "
Thank You
Error 501
spgi said:
Follow these steps and should be fine:
1.Battery up 70 % charge;
2. Pull and try one of these archives:
http://rapidshare.com/files/79905049/_Sable___G3_DEVICE_ONLY_hw6915-1.21uk.rar.html
http://rapidshare.com/files/154798440/HW6915_ROM_FOR_G4-121UK_.exe.html
3.from folder delete CEBL.nbf, RadioFS.nbf, RadioOS.nbf, and view picture from attachmend.
4.Аnd you should be happy with the restored 600 $
Good luck
Click to expand...
Click to collapse
Error 501, os...
Help!!!
hi
i have the same serial, hp logo, vG.39 problem, i want to repair it but with spanish languaje, can anybody helps me?
when appears serial in the screen , must i plug the pda to the pc with serial cable to repair it or usb cable?
thanks
Hello...this is my problem too...my hw6915 screen: hp+ logo...
I probed this solution:
"1: hold down the 2 function buttons on either side of the joystick (NOT the call answer and call kill buttons, between them )
2: while holding the buttons down, use the pen and press the reset button at the bottom of the phone.
You should now have a bootloader screen, with an HP logo, and SERIAL or USB line of text at the top, and a G.39 version text at the bottom of the screen....
Activsync need not be connected at this stage, just your USB cradle or cable....
3: Download and extract the _Sable___G3_DEVICE_ONLY_hw6915-1.21uk.rar file from above... remember to delete the files from folder - CEBL.nbf, RadioFS.nbf, RadioOS.nbf..
4: run the sableRUU.exe ... this will now install the CE OS in english...."
but this is the end (see the attachments)...
What my problem? Help please...
Ooops...this solution working on xp, not working x64 Vista...
THX!
Working...!
yes ,it is vevy good
Sulphy said:
Heya! Ok, what i did was the following,
1: hold down the 2 function buttons on either side of the joystick (NOT the call answer and call kill buttons, between them )
2: while holding the buttons down, use the pen and press the reset button at the bottom of the phone.
You should now have a bootloader screen, with an HP logo, and SERIAL or USB line of text at the top, and a G.39 version text at the bottom of the screen....
Activsync need not be connected at this stage, just your USB cradle or cable....
3: Download and extract the _Sable___G3_DEVICE_ONLY_hw6915-1.21uk.rar file from above... remember to delete the files from folder - CEBL.nbf, RadioFS.nbf, RadioOS.nbf..
4: run the sableRUU.exe ... this will now install the CE OS in english....
mine has been in brick phase for weeks now, its the first time i managed to get the OS back up! Now i need to sort out the GSM problem....!
Hope this helps!!!
Click to expand...
Click to collapse
yes .thanks...............