Database Users

Active sync problems!!!!!! (with pics)

was going to upgrade to the new exec ROM today.... except Active sync decided to fail on me.
I'm running 4.1 on windows XP (SP2) and when i connect the exec via USB NOTHING happens at all, the little icon doesn't even go green or anything. i just get two "bum" and "bum, bum" sounds lol
However the LED on the exec does turn orange (the charging mode colour)
any help is much appreciated on how i can resolve this issue.
thanks everyone!

Check your ActiveSync connection settings (file -> connection settings) and make sure USB is enabled.

done that, and it is ticked....
i have also tried reinstaling active sync....

Turn OFF all your firewalls and try it again.

done that too........ followed the whole trouble shooting thing aswell... all in vain...

in the device manger from my desktop, under "network adaptors", "windows-mobile based device" is showed with a yellow circle with an explanation in it. it then states uunder "properties"
"The drivers for this device are not installed. (Code 28 )
To reinstall the drivers for this device, click Reinstall Driver."

The usual reason that ActiveSync has is the firewall. I pull out my WiFi card, disable the firewall, then connect the cable.
Once the unit has been sync'd I can put the firewall back on and get back on the net.
YMMV.
If your firewall wasn't blocking it before, then it might not be this.

quck update. when i coneect now, in the task bar a little bubble apears stating "new hardware found"
then a box appears with "Found new hardware wizard" on it.

i have a similar problem:
when i connect, activesync does recognize and attempt to sync, but when it starts 'looking for changes', it never ends! it keeps on 'looking for changes' for ever, or at least VERY LONG, ending up with an error on my PC saying that synchronisation failed and that i should restart my desktop computer, which doesn't solve thw problem..
with my blueangel i never had this problem, although i was using activesync 4.1 already back then too..
ideas, anyone?

spdfrx said:
i have a similar problem:
when i connect, activesync does recognize and attempt to sync, but when it starts 'looking for changes', it never ends! it keeps on 'looking for changes' for ever, or at least VERY LONG, ending up with an error on my PC saying that synchronisation failed and that i should restart my desktop computer, which doesn't solve thw problem..
with my blueangel i never had this problem, although i was using activesync 4.1 already back then too..
ideas, anyone?
Click to expand...
Click to collapse
i used to get that problem before, it seemed to resolve itself :?
but now nothing happens, not even the swirly motion of the active sync in the taskbar, the LEDs on my exec is the only thing that lets me know its connected. :evil:

This is exactly what I have on my computer too. The only solution for me is to turn OFF windows firewall and all other firewalls I have, then active sync works as it should be. You have to remember to turn OFF all firewalls BEFORE connecting your Universal via USB for it to work. It will not work if you connect the Universal first then shut OFF all firewalls. It has to be the other way around.

Ok i have a simlar problem, but let me explain first:
I upgraded to winmobile2005 on my Himalaya which went well and without a hitch. I was on my parents pc and i active sync' without a problem.
Ive now come home, and i cant sync. It sits there saying 'Retreaving settings...' and just doesnt go any further. Ive soft and hard reset device, checked firewalls etc - no luck.
It has identified the old active sync name, but nothing else. I can explore the device before it crashes after looking though about 5 directories/downloading large files.
How can i remove the old sync information from the device (as i guess this is the issue)?
Cheers for your time,
Sam.

have you tried to delete that partnership?

blofse said:
Ive soft and hard reset device
Sam.
Click to expand...
Click to collapse
If you already "Hard Reset" your device, then whatever information on it has already been erased clean to factory defaults, unless you are restoring from a backup program after the hard reset. Then I suggest you restore to a file prior to performing an active sync connection to your parents' computer.

cktlcmd said:
This is exactly what I have on my computer too. The only solution for me is to turn OFF windows firewall and all other firewalls I have, then active sync works as it should be. You have to remember to turn OFF all firewalls BEFORE connecting your Universal via USB for it to work. It will not work if you connect the Universal first then shut OFF all firewalls. It has to be the other way around.
Click to expand...
Click to collapse
i have turned off all my firewalls... still doesnt work...

budo*85 said:
have you tried to delete that partnership?
Click to expand...
Click to collapse
The partnership doesnt exist on my pc, and isnt listed until i plug it in.
cktlcmd said:
If you already "Hard Reset" your device, then whatever information on it has already been erased clean to factory defaults, unless you are restoring from a backup program after the hard reset. Then I suggest you restore to a file prior to performing an active sync connection to your parents' computer.
Click to expand...
Click to collapse
Well yes it used to do that on WM2003, but it doesnt on this version. And im not using a backup program. Unless the program auto-saves to my storage card in some way? In which case whats the active sync file im looking for?

budo*85 said:
spdfrx said:
i have a similar problem:
when i connect, activesync does recognize and attempt to sync, but when it starts 'looking for changes', it never ends! it keeps on 'looking for changes' for ever, or at least VERY LONG, ending up with an error on my PC saying that synchronisation failed and that i should restart my desktop computer, which doesn't solve thw problem..
with my blueangel i never had this problem, although i was using activesync 4.1 already back then too..
ideas, anyone?
Click to expand...
Click to collapse
i used to get that problem before, it seemed to resolve itself :?
but now nothing happens, not even the swirly motion of the active sync in the taskbar, the LEDs on my exec is the only thing that lets me know its connected. :evil:
Click to expand...
Click to collapse
you're right! it did! (i already had turned firewalls off, i always do, hate them)
and to tbe last poster: are you using activesync 4.1 at your home?

Regarding Firewall
I've posted this earlier in another thread, but I guess it is not bad to post here again
Regards
------------
Thank you for your suggestion, I would however say this "Be Careful", I would NOT turn firewall completely if I were you guys, IF I have doubt that it is due to firewall, I would turn the firewall ONLY for the Universal interface
pls find the steps here
1. Start
2. Settings
3. Control Panel
4. Security Center
5. Windows Firewall icon in the lower part
6. Advanced Tab
7. UNCHECK the Network Connection that represents your Universal
Note,
A. To be sure that you are not disableing firewall on the wrong interface, please rename your Local Area Connection (x) to your Pocket PC device, so then you would know for sure you are dealing with the RIGHT connection (I use SPV M5000), renaming it is very easy, right click on the connection in the NETWORK CONNECTIONS, then RENAME
B. Disabling firewall for all connections IS VERY DANGEROUS especially IF YOU ARE ONLINE or ON A NETWORK, you might get SERIOUS problems, from viral infections to Hacking (only God knows)
C. The above applies only for WINDOWS FIREWALL on Windows XP Service Pack 2, I have no idea how to do it with Zone Alarm or ANY other software as I dont use any, but I think there must be someway to do so.
All the best & good luck.

spdfrx said:
and to tbe last poster: are you using activesync 4.1 at your home?
Click to expand...
Click to collapse
Yes, both locations have v 4.1 installed. Does no one know of the files i should be removing on my PDA then? :S

Blofse : there are no files to remove - you've already said that you've done a hard reset and returned it to the factory settings which removes all user data and therefore, the device has nothing on it at all about partnerships with computers - i would suggest looking elsewhere for a resolution.
Budo : I think your problem is the yellow symbol on the network card entry in device manager. In this case, I would unplug the exec, righht click on this network card entry and click remove. Then uninstall activesync. Make sure the actve sync folder is deleted and check the windows\system32 folder for files called rapi.dll and ceutil.dll (these might have gone during the uninstall, but check anyway).
Reboot your PC and reinstall activesync before plugging in your exec again.
Hopefully, this will sort you out but post back if it doesn't.
Cheers,
Smiffy.

Activesync Disconnects

Hi,
I have been suffering with a persistant Activesync connection problem. It usually connects and syncs fine the first time I boot my machine, but after around five minutes it almost always disconnects (though my Vario II continues to charge). Unplugging and replugging the USB cable does not work and the Activesync icon remains grey. Trying to start the connection manually either from the Vario II or from Activesync on the desktop also does not reconnect the device. In fact the only way to get it to connect again is to reboot my PC.
I'm using Activesync 4.2 downloaded from Microsoft this morning. I've tried deleting and recreating the partnerships, which does not help the issue. I've tried several USB cables which also do not resolve the issue, so I am now asking for your help.
If anyone has any insights into whaty might be happening I would appreciate your help...
Thanks,
Chris

I'm having the same problem, but in my case unplugging the cable from the device and plugging it again usually restarts the sync. Sometimes, however, I have to soft-reset to get it working again. Very annoying.

Hi Chris,
Ive had tons of issues with activesync on my works laptop..... I use a VPN and zonealarm... I used to have tno issues but since I got WM5 wich uses IP address's it always does the same thing as yours.. ive made sure the IP address is allowed in zone alarm.... my colleague also had this issue.. he managed to solve it by using a differnet USB port as his laptop has 3 one is on the side of the machine ... try using a different USB or disable zone alarm if you use it this could be causing the problem.
I sometimes get it to work if I have no VPN client running but as soon as I do use it the active sync stops.
Hope this may help you
James

I have exactly the same issue with my Vario II, never happened with my Vario and I have changed nothing other than my phone. Makes me think its summin to do with the harware possibly? Anyone else found a cure for this?

I Had the same problems, so I gave up on USB connection with active sync, I have 4 USB ports on my laptop and tried all, I now use bluetooth and works everytime.
There has always been problems with USB and actgive sync, so 4.2 was suppose to fix, but not for me.

I've got the same probelm on my Tytn. I've solve it to delete the Pocket Mechanic :shock: , I've done a S.R. and from now on the A.S. works correctly.
Ciao, Cesare

Had to use my old vario for a bit today, used activesync and it worked fine for the whole time I had it plugged in, got a new Vario II replacement today, got home and its exactly the same, would appear to be a mismatch between Vario II and activesync 4.2, can I connect by wifi?

Hello hmm the problem is if it uses direct or ip ,try go settings - connections - ( usb to pc ) and disable advance network funtctionality.
Hope that works
thanks

I had this problem too - I disabled advanced network capabilites in the "USB to PC" control panel under the Settings/Connections folder, and then Activsync stayed connected after that.
HTC TyTN 7/22/06 ROM

Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?

After the activesync working fine with my orange spv3100 for 4 weeks it suddenly refused to connect. I un-checked the "advanced functionality" box as suggested and it works again. Many thanks for the solution peeps.
I too would like to know what functions this deactivates.

Same problem, I've installed ActiveSync 4.5beta and now it stay connected, sometimes it disconnects but after restart of the phone it works again, one friend told me that the problem comes from the Activesync in the phone, so may be we have to look for the problem in the phone not in the PC

Activesync 4.2 problem
Hi all,
I too started having the same problems with Activesync 4.2 hanging my phone if left charging overnight. I decided to disable the advance network connection and that worked for a while. Now the phone wont sync AT ALL. It charges, but I can't do anything else. I reinstalled the Activesync 4.2, did a soft reset, off-on to the mobile, turn off-on my computer and still nothing. I will d/l Activesync 4.5 beta to see if that solves the problem, but it looks to be a problem with the Activesync in the mobile and not the one in the computer. I did the troubleshooting and it is detecting the USB connection but does not sync. I would really like to know if wireless sync can be achieved. Will post any fix if I find one. BTW my mobile is about a month and a half.

activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
pls help here im tired of this activesync problem
thank you

Sync problems with tytn
I've read through all the messages in this thread and wondered if someone could help me with some problems i've been having with syncing mine with a laptop. Often when I have the device plugged in when i boot up the laptop activesync won't start until i've disconnected the usb cable then reconnected it again-i never had this problem with the imate jam. My second problem arises when sometimes it says on the files section that there are un resolved items???? i then try to resolve the issue and a wizard comes up with add or remove buttons.afraid that i might remove something essential i tried the add button hoping this might resolve the issue-it didn't. i then gave up as nothing worked. after switching the laptop off and then syncing a day later there were no items to resolve so what exactly is happening. how can there be unresolved items one minute and nothing the next.also i hadn't done anything different on the tytn.if i select the add button on the window does it add a copy of the file highlighted and could this affect the operation of the device.Sorry if this seems a little confusing but i never had this problem with an xda exec or an imate jam.
please could someone help a non technical fifty something.

activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY

I agree, where is this option?
I'm running version 4.2 and along the top bar all I'm seeing is:
File - View - Tools - Help
Nothing like "Settings" and/or "Connections" in sight. Under "File" there is the "Connection Settings" option, but nowhere does it mention "Advanced Networking Functionality".......
Can someone explain this please?!

The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.

pof said:
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
Click to expand...
Click to collapse
Every time I try that, I just get an error message saying: "Failed to disable RNDIS to use Serial".
Has anyone else seen this message? Happens regardless of whether the Vario II is connected by USB or not...
Thanks,
Chris

I'm still getting the RNDIS error, has anyone else come across this? Is there a solution?
Cheers,
Chris

Touch Hd 3G vodaphone uk lose of connection

Hi guys,
Been looking around all day for a fix for this. I thought it was just a setting issue so have been try all kinds of setups from what vodaphone have on their website to what i have googled and still have the issue.
I can get on to the internet after a reboot but after a while it will lose connection and i will get two arrows one left and one right on top of each other instead of the normal "G" icon. As so as this happens i lose all connection to the internet and cannot get back on unless i reboot the phone a few times then the "G" icon comes back and the internet is back up and running.
Its my only grip so far with this phone everything else is great.
Any ideas
Damo

wierd. that sounds like the activesync icon...You're not connected to your PC via cable/bluetooth are you?
Stupid question I know, but best to get it out of the way.

rhedgehog said:
wierd. that sounds like the activesync icon...You're not connected to your PC via cable/bluetooth are you?
Stupid question I know, but best to get it out of the way.
Click to expand...
Click to collapse
oh my god i am such a noob, i did not know that when the usb connection is connected the interenetconnection stopped......hang is that right, should it still not connect to the internet?
Thanks
Damian

When you plug it into the PC, it will try and use the PC's internet connection.
On the PC, open activesync and go to file, connection settings.
Make sure that the option called This computer connects to is set to the internet.
Also, tick the box marked Allow wireless connections... then it should be able to connect while plugged in.
If you have vista and WMDC, these options should still be around, but as i have avoided vista like the plague, i can't tell you where they are cos i simply don't know.

ActiveSync/PCtoUSB Problems

Hey guys,
i've got a very big problem.
I dont know why but every time i connect my Blackstone to the Computer it always open the "Internet Sharing" thing. Ive changed it over "Settings" back to Sync (and in settings/connections/USB to PC, check "Ask me first about USB connection type when I connect the device to the PC" also), but no change.
Then i canged in the registry the following key "HKLM\Software\HTC\USBToPCPopUP\" DWORD: OnlyTwoChoice=1
now the HTC Popup with the option "Sync" and "HDD" show up, but when i choose Sync it doesent connect and sync.
I want my three Options back and want the option that i can choose out of "Sync" "HDD" and "Internet Sharing"
Thank you
greetz

I started getting this problem when I used the Internet Sharing option for the first time. From then on it would automatically try IS instead of Activesysnc, no matter what I did.
I solved it by unticking the Enable faster data syncronization box in USB to PC tab, but this results in a clunky pile of tabs that come up when connecting to the PC.

Unticking the "Enable faster data syncronization" box in USB to PC tab, doesent solve the problem

Hello
I got the same problem where I did not get the "3 choices" screen while connecting to usb, and IS by default...
I just deleted all keys in the registry under //HKLM\Software\HTC\USBToPCPopUP\
and it went back to normal....
Hope it will the same for you..

I have the same problem since a while, but haven't found a solution yet... starting to get a little desperate...
dapezzz said:
Hello
I just deleted all keys in the registry under //HKLM\Software\HTC\USBToPCPopUP\
Click to expand...
Click to collapse
I guess you mean the registry on the device itself?
I been looking for that, but it looks i don't have this //HKLM\Software\HTC\USBToPCPopUP\...

in fact, i'm facing the exact same problem as described in this htcforum.com post:
"http://www.htcforums.com/post5958.html#p5958" (yes, i posted there too )
i'm pretty sure the problem is NOT pc-related, the data-connection fails at every possible system i tested it with (ranging from xp to vista to ubuntu to osX), at least the usb-diskmode worked before on all these systems before... not anymore...
the answer of HTC support wasn't of much help either:
Dear valued HTC customer, Thank you for contacting our Customer Support Center. We are dedicated to providing you with the best quality service and answering all of your questions and concerns. You recently wrote us about an issue that you have encountered with your device. To clarify your issue, you stated that you were unable to connect your device to the PC. . For this you will need a full version of Microsoft Outlook 2003 or newer and Microsoft Activesync for Windows XP or Windows Mobile Device Centre for Vista. Once these are installed simply connect your device to your PC and it will transfer your details to your PC. I hope this is of help to you. If you need any further help we recommend calling for a direct guidance on these steps for synchronising. If the above steps do not resolve your issue, we invite you to visit the support area on our Web site.
Click to expand...
Click to collapse
i suspect them of not even reading about my problem, and just firing some default answer back... not really helpfull.
so i keep looking around for possible solutions for now.
I'm seriously thinking to make use of the warranty, but hate to lose the device for a long periode... anybody has experience with that?

another PCtoUSB problem, i get all 3 options, HDD and Internet Work perfectly, ActiveSync however doesn't. Vista recognizes it as a USB Pocket PC, but Vista Sync Center and WMDC do not, nothing. On HTC i get the charging icon, but not the Sync icon. Also in the ActiveSync --> Connections menu i have "Sync all PCs using this connection:" ticked, however the drop down menu is empty, nothing to select.
in the ActiveSync start screen there's just the fake Microsoft Exchange account, nothing else
Everything was working fine till few days ago :/

dapezzz said:
Hello
I got the same problem where I did not get the "3 choices" screen while connecting to usb, and IS by default...
I just deleted all keys in the registry under //HKLM\Software\HTC\USBToPCPopUP\
and it went back to normal....
Hope it will the same for you..
Click to expand...
Click to collapse
I tried this but still get ICS opening when I connect my device up. It is driving me mad now trying to sort this - I may even resort to a hard reset before the end of the weekend.
The only way I can get sync to work is to disable the faster data sync option.

hmm, every system i test with gives the same result:
the htc device does charge, but the usb data-connection never works...
could it be a faulty connector?

http://forum.xda-developers.com/showthread.php?p=3764541#post3764541
I have the same problem and the above method solves the problem
Hope it helps.

Fix WiFi WITHOUT cable?

Hi, im having some problems with my 8125. First, WiFi stopped working, dont know why, i cant open the settings for wifi, only for wlan, and when i try to connect via comm manager, it simply doesnt work.
THEN, the usb port broke, so i soldered it back, but apparently sth went wrong, now my device charges, but it wont sync. Im happy with my ROM and my Radio as it is, i mean i could change it but since my phone wont sync i cant, not big deal, i can manage files through the card or BT, but my problem now is that apparently the only way of fixing my WIFI issue is by flashing it, and that i cant do without sync..
any solution for this? tried also wifi apps (wifi monster), to see if they could get it to work, no luck.

jinxie said:
but my problem now is that apparently the only way of fixing my WIFI issue is by flashing it, and that i cant do without sync..
Click to expand...
Click to collapse
in case you want to flash a new rom for your 8125 maybe you can check your wiki for wizards, i think you can flash any rom in bootloader mode where in you can disregard syncing with activesync.... better read more here
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
wish i gave you a little idea that its possible to flash even if there is no activesync connection (the least i know)
enjoy

thanks for the reply, but with sync i meant that the pc wont recognize the device, tried in 3 different computers, 2 vista 1 xp, none of them could recognize the device, 2 of them did in the past. i must have soldered it the wrong way, missed a pin or sth..
so thats the thing, any way to fix my problem without using the usb cable?

Try doing a hard reset, just make sure you back up all your contacts, ringtones, whatever before you do it.

hard reset did the trick.. or thats what i thought. i mean, i did it (lost evth btw), and it worked, first time i turned it on from comm manager, the icon didn change, but it did turn on, checked on settings>connections, and there it was "wifi", great i thought. then, after some hours, dont know, a soft reset, but without adding nor installing ANYTHING, it does not turn on from comm manager anymore, and the wifi settings yet again, GONE! WTF is wrong with this! i mean why the damn "wifi" icon suddenly disappears from the settings menu?
but (sometimes, not always) i am able to turn it on from thw wlan settings, sometimes it has the "wireless" tab, from where i can turn it on by opening some network menu and clicking turn on wifi, but that "wireless" tab does not always show neither.
ill try changing the comm manager and see what happens.. but isnt there some king of shortcut that i could use to acces the [insert nasty, nasty insult here] "wifi" settings???

seems to be working ok with this app http://forum.xda-developers.com/showthread.php?t=299070&highlight=wifi+shortcut
very useful btw, but very heavy too, im looking for sth light that wont use that much storage.. some kind of shortcut or script..

think i found the problem, i mean, not the why, but the what, in registry, the wlan drivers key is missing, HKLM\Software\Drivers, inside there should be a folder "WLAN" with a/some key/s inside, but there isnt such thing in my phone..