Database Users

Activesync 4.1 - not working

Can anyone help please?
I cannot get my xda mini to sync. Basically it just keeps running and nothing happens.
I have researched a lot of threads which refer to setting up a dummy server connection for what I presume is the the "exchange server" which I have attempted - is this a false IP address please?
On my PC, activesync diplays Exchange Server and my XDA with a list of the sync items below.
I keep getting a message on the XDA saying it cannot retrieve an IP address for the connection. Sometimes when I sync the try to connect via GPRS
I do have a wifi connection set up which now works (most of the time).
TIA.

I have the same problem as you with my QTEK 9100. Sometimes it works to connect the device to my portable computer (Compaq Presario 2800) via ActiveSync but mostly it does not. ActiveSync just keep looking for the device but doesnt find it.
I have also tried after that I have turned off the firewall and antivirus software, but it still doesnt work. The few (2-3 times) that it did work I had my firewall and antivirus running.
Anyone have an idea what I should do? It's a brand new QTEK 9100 (just got it a few days ago) with ROM 1.3.7.13 SVE, ROM date 9/29/05. Since I can't connect my device to the computer I can't upgrade the ROM.

turn off your firewall
disable your onboar intell wifi card if you have one

Does this happen to your device when you connect to Activesync immediatly after soft-resetting the device?
I have a similar problem, but I have no problems when I connect to AS for the first time, if I try connecting again before performing a Soft-reset AS won't find the device and the device becomes unasable, only soft-reset solves this problem.
Anyone else with these symptoms?

nolovelust said:
turn off your firewall
disable your onboar intell wifi card if you have one
Click to expand...
Click to collapse
thanks but as I said I have turned off the firewall, and I don't have a built in wifi card in the laptop.
macrinus said:
Does this happen to your device when you connect to Activesync immediatly after soft-resetting the device?
I have a similar problem, but I have no problems when I connect to AS for the first time, if I try connecting again before performing a Soft-reset AS won't find the device and the device becomes unasable, only soft-reset solves this problem.
Anyone else with these symptoms?
Click to expand...
Click to collapse
Yes it is the same problem no matter of the soft reboots. The only times I get it to work is when I have reinstalled the activesync 4.1 software on my laptop, after a reboot (of the laptop) it does not work; instead it only display a network icon with "Limited or no connectivity" (this is also without both firewall and antivirus installed) when I connect the device. The result is that AS can't find the device...
My theory is that it somehow looses the USB drivers installed with ActiveSync 4.1 when I reboot the computer. Anyone know how to fix this? Which (dll?) files belong to the USB drivers? I might be able to manually replace them in the correct path if I find that out...

any news??? I just met the same problem

simple enuf chaps...
i just met the same problem and the fix is pretty simple...
remove a/s 4.1
re-install a/s 3.7 / 3.8.1
re-establish the partnership
re-install 4.1

How do you get a connection between a WM5 device and ActiveSync 3.7 or 3.8?
I cannot get a partnership.
Is this because a WM5 uses IP-protocol for the connection?
thanks
Peter

I am using Dopod 838, the asia version of Qtek9100.
I also seems to have problem on activesync 4.1 which keep on sync and fail to connect. When it fail. I will try
1) In Windows Task Manager, kill wcescomm.exe
2) Kill everything in wizard
3) manually turn-on activesync4.1 on pc again.
4) connect wizard with PC again..
I just bought my phone for 2 days and i have to try a few more times to confirm it really helps.. may be you can give it a try too.

PeterP said:
How do you get a connection between a WM5 device and ActiveSync 3.7 or 3.8?
I cannot get a partnership.
Is this because a WM5 uses IP-protocol for the connection?
thanks
Peter
Click to expand...
Click to collapse
you will need AS 4.0 and above for all WM5 devices

You might want to check device manager when your device is hooked up via USB and make sure there are no exclamation marks on your handheld device.
I have a laptop and I only installed ActiveSync 4.1 and it works fine. I've even re-imaged my laptop since getting the phone and wasn't a problem second time around. I also installed 4.1 on my work PC and it works fine there too.
Not sure if you can use anything older than 4.0. (Not sure the reasons why)
At work I tried to use 3.8 (Just for the hell of it) but 4.0 updates all the USB drivers and stuff. Anything below 4.0 will not recognize WM 5.0 devices as jfran said. After installing 4.x I don't know the reason or need to uninstall then install something older then uninstall and reinstall 4.x.
It should work straight after install. However I do NOT know what happens if by chance you had an older version of ActiveSync then tried upgrading to 4.x. Should work though. I know people have had success upgrading from 3.7 and 3.8 to 4.1 to use the newer Dell Axim x51v which have WM 5.0 here in my environment.

Thanks everybody for your replies,
it was after hamish_dy tip I wanted to know how to get an connection between AS3.x and a WM5 device, since I haven't been able to do so. And I also have read that WM5 needs AS 4.x in order to sync.
Have had my Qtek9100 now for a week, and have been studied this forum in detail for a solution on my problem.
Previously I had a Qtek S100 which synced with my laptop together with AS 3.8. My company uses Groupwise as e-mail system, but with Outlook 2002 also installed on laptop I got it working (also after some days of trial).
Now with my Qtek9100 nothing happends when I plug in the USB-cable. Well not true, it will connect with an IP-address and I can from AS see the filestructure on my Qtek, BUT nothing starts syncing (calendar, contacts, e-mails,etc.). I watch task-manager but nothing kicks in. Previously with my S100, mapisp32.exe always kicked in and was the magic component between outlook and groupwise. With AS 4.1 everything is dead in task-mgr. I also receive the 85010014-error message sometimes.
Have uninstalled AS 4.1 several times, cleaned out registry of AS keys, rebooted, installed AS again, reinstalled outlook, turned firewall off, turned antivirus off, soft-reseted my qtek, and so on. Have downloaded the swedish version of AS 4.1, since my Qtek has swedish language, and thought that was the reason. But no. Soon out of options and ready to take my new qtek back to the dealer.
Any help from anyone is very much appreciated.
thx in advance.
Peter
----------------------
ROM: 1.3.7.13 SVE
ROM-date: 9/29/05
Radio: 01.04.10
Protocol: 4.0.13.17
Ext Rom: 1.3.7.125

One thing you should try before sending your device in is to try sycnching up on a clean machine, i.e. (a freshly imaged machine)
I'm assuming initiating a manual sync does nothing?

ccisn said:
One thing you should try before sending your device in is to try sycnching up on a clean machine, i.e. (a freshly imaged machine)
I'm assuming initiating a manual sync does nothing?
Click to expand...
Click to collapse
No, manual sync does nothing.
If I can't find any solution before mid-next-week, I will find a workstation at work and load only the minimal components/applications needed and try to nail down the issue, as a last try. I work with IT myself so I'm not keen to reimage my laptop, there are just too many things to reinstall.
thanks for the advice!
Peter

Active Sync Sync via USB Resolved (well for me anyway)
Over the last month I have not been able to sync my Wizard to my laptop via USB. Via bluetooth worked a treat, but I was not able to upgrade ROM via btooth.
This morning, completely by accident I resolved the issue with USB sync'ing to Active sync 4.1.
This works for me:
1. Connect Wizard to laptop via USB (you will get the usual problem, with ActiveSync saying "Connecting" and nothing else
2. Whilst phone is still connected via USB perform soft reset on phone
3. The laptop system tray should display "Found new USB device" and then say "Pocket PC USB Sync found"
4. When the laptop / pc has finished installing software and displays "Your new hardware is installed and ready to use" Disconnect the USB cable from your Wizard.
5. Wait a couple of seconds and then reconnect your Wizard via USB and hopefully it will work.
Please let me know if this works for anyone else!

One more thing you could try before throwing it back at the salesman is to check your network connections.
Go to Control Panel and select network connections - make sure you are set to view details and look for the "Local Area Connection" that has a description of "Windows Mobile-based Device". On mine it is "Local Area Connection 3". You may have to scroll to the right to see the description.
Right click the relevant connection and then click "properties". Make sure that the following entries ONLY have a tick next to them.
Client for Microsoft Networks
File and Printer Sharing for Microsoft Networks
Internet Protocol (TCP/IP)
For some reason on mine none of them were initially selected :?
Click OK, when I did this it started syncing straight away!
Good luck!

I am also having a problem with activesync 4.1, up until now i have been able to sync perfectly via bluetooth or usb. However now when i try and sync activesync on my PC says connecting and nothing happens!!
I have tried everything, uninstalled, reinstalled, installed on my laptop (same problem)....
Given i have the same problem on 2 different PC's i am starting to think that its actually the Mini S and not the PC thats the problem. I feel a hard reset coming.............

s4vva said:
I am also having a problem with activesync 4.1, up until now i have been able to sync perfectly via bluetooth or usb. However now when i try and sync activesync on my PC says connecting and nothing happens!!
I have tried everything, uninstalled, reinstalled, installed on my laptop (same problem)....
Given i have the same problem on 2 different PC's i am starting to think that its actually the Mini S and not the PC thats the problem. I feel a hard reset coming.............
Click to expand...
Click to collapse
Hard reset has done the trick, so it turns out all problems may not be down to our pc's......

The same thing happens for me sometimes. What I have found ou this helps.
Unplug pda from sync cable. Kill all active programs on the pda. Plug in sync cable again. Viola! It syncs.

I have the same trouble, activesync just says connecting and thats it, i havent found any particular reason for it. SR does not help, just HR which is kind of overkill. Im really glad for the sprite backup software. I have tried all different things i could think of while i couldnt sync and nothing helped. I have allready about 3 HR after me.

Activesync 4.5 doesn't work anymore

Hi. I've had a really good search for info before posting and tried lots of things but I'm stumped!
I've got a Softbank X01HT (HTC Hermes 200). It used to work fine with AS4.2 and 4.5 but stopped working one day and hasn't worked since!
When I connect the phone via USB everything looks normal. I get bing-bong and bong-bing etc, I can see the phone is attached in device manager, the phone charges etc. etc. but AS won't connect to the phone. In AS connection setting it says USB is available etc. I have deselected advanced USB connection and tried "work"/"internet" etc.
I haven't done anything to the phone. No upgrading of ROMS or OS or anything. I even gave my laptop a first birthday!
I have a Dell Precision M60 running Win XP SP2 and a fresh installation.
I have deselected "do not allow exceptions" in Windows Firewall and AS has put exceptions for itself in there.
I am not running through a hub.
I'm hoping someone can help - maybe I missed something in all my searching for a solution.

Had something similar happen to me once. Resolved it by deleting the partnership on the pc from within active sync on pc (make sure phone isn't connected or active sync won't let you delete the partnership). Issue was with the partnership profile on the pc getting corrupted nothing to do with phone at all. Once partnership is deleted connect phone (make sure you have reset your phone settings that you have changed back to default) and set up a new partnership. Good luck and let us know if it works.
Cheers
Barney

Barney
Thanks for replying.
As mentioned, my laptop got a "first birthday" i.e. the HDD was wiped and the OS re-installed. There are therefore no pertnerships or remnants buried deep in the registry etc. to delete. In AS (with or without the phone connected) everything except for "connections settings" is greyed out.
Cheers
Bryce

Do you by any chance have zone alarm running? If you do switch it off and see if it works. If you don't then switch off Windows Firewall and see if works. Post the results.
Cheers
Barney

tatuanui, have a look at
http://pocketpcapps.net/activetweak.aspx
maybe this freeware tool can help you
cheers jost

Whenever mine acts up I simply disconnect my phone, restarting my pc, restart my phone and is well. I dont have the problem often but it solves it for me

Active sync
I had a similar problem. Check out Settings/Connections USB to PC and uncheck "Enable advanced network functionality"
This worked for me.
May not be related but worth a try.

Thehoodedclaw_uk said:
I had a similar problem. Check out Settings/Connections USB to PC and uncheck "Enable advanced network functionality"
This worked for me.
May not be related but worth a try.
Click to expand...
Click to collapse
Thanks but, as metioned, already tried that one.

g35driver said:
Whenever mine acts up I simply disconnect my phone, restarting my pc, restart my phone and is well. I dont have the problem often but it solves it for me
Click to expand...
Click to collapse
Thanks. I wish it was something simple (yet annoying) like that...

Barneyabz said:
Do you by any chance have zone alarm running? If you do switch it off and see if it works. If you don't then switch off Windows Firewall and see if works. Post the results.
Cheers
Barney
Click to expand...
Click to collapse
Barney
Cheers. When at work, Windows firewall is off. When at home it is on but exceptions are allowed and AS has put itself in the exceptions. Switching off the firewall completely is not an option as the admin has switched that function off (greyed out). This is no different to when it was all working so I'm not so sure it's that.
I don't have zone alarm. In fact I have re-installed very little since having reinstalled Windoze.
Keep the suggestions coming though!

tatuanui said:
Barney
Keep the suggestions coming though!
Click to expand...
Click to collapse
Had a similar problem.
Open task manager. Is RAPImgr.exe taking up all the processor time on a CPU (so will take 50% on a dual core machine, 100% on single core).
I had this issue with AS 4.5 when upgrading from the old machine (Wizard) to the new Hermes and basically had to reboot between connection attempts to get RAPIMgr to die. When I killed it manually, the computer rebooted anyway.
The problem with this seemed to be disconnecting it mid-sync and then connecting a new phone which then broke it. The way I solved it was to stop connecting the Wizard.....
Perhaps try removing the relationships on AS on the phone. I guess it might work....

Hi last suggestion I have - I know you mentioned your pc was wiped so there are no partnerships, however the first time you tried to connect your phone since then something might have gone wrong and a partnership might have started to be created but not yet completed. With your phone disconnected can you open active sync, click on "file" then on "delete mobile device" (if it allows you to - it might be greyed out) - See if that works and get back to us.
Cheers
Barney

At a loss with activesync

I'm at a complete loss with activesync. I've done everything I can think of and I can't get my computer to see my 8525. I've reinstalled activesync and hard resent my device. When i plug in it says
one of the usb devices attached to this computer has malfunctioned and windows did not recongnize it
usb root hub (2 ports)
- unknown device
- usb composite device
Am I missing some sort of driver somehow? I don't know what to do..please help.

Hey i had the same problem. Is this your first time installing/using activesync??
Well what I did was this:
-Install activesync 4.2 from the CD (CD that came included w/unit).
-Uninstall activesync 4.2 (don't delete any drivers installed by the CD)
-Install activesync 4.5 (download it from Microsoft Website)
-Plug in your 8525 to the PC via USB cable, and your PC should NOW recognize it.
This is what I did and it helped. There may be a better/alternate way in doing this, but I FINALLY got Activesync to work!
Oh and see if you can help me with the prob. that I'm having.
http://forum.xda-developers.com/showthread.php?t=383065

Ya I can't find the CD that came with my phone for the life of me.

ok found disc and tried that. Nothing. Could my phone be broken?

heres what I had to do to get AS working again.
Delete the current version of AS from your PC
Go into c:/wondows/program files and delete the AS folder (Windows may not let you delete some DLL's.
Go into the registry and delete any AS entries you can find, or do what I did and use Ccleaner registry clean up program (Google it, it's freeware)
Restart the PC
Install AS 4.2 from the AT&T/Cingular disk.
Install AS 4.5 from MS.
Hook up your 8525 and all should be well.

Tried that....didn't work.

Still hoping someone has some advice. I've tried two different usb cables and used different ports as well so it's not that.

quick update...
I searched through the forums and googled a few things and from what I can tell other people have had this problem and not found any solution. I am considering trying bluetooth but I don't have bluetooth for my PC...can i get some sort of adapter? Also...Is there a specific driver I can download for the HTC hermes that might fix this issue?

Yea your situation sounds like the one I used to have.
Do you have a firewall?? If so DISABLE it. I have COMODO and even though I would press "accept", the drivers wouldn't install completely.
This is what I did:
-Start your PC.
-Uninstall Activesync through the Add/Remove.
-Delete the Microsoft Activesync folder in the Programs folder.
-Restart your PC
-Wait till your firewall loads up. Disable it.
-Go through the procedures I mentioned in my 1st post.
Oh and make sure you have internet access. I'm not 100% sure if internet access helps, but it could help with the drivers.
Even though I just got my 8525, I don't mind helping someone

tried that. no go. I think i'm going to just have to get a new phone.

Did you try disabling the Advanced Network Functionality?
START -> SETTINGS -> CONNECTIONS -> USBtoPC

Yes. when I do that it makes windows see my device, but windows does not know what my device is. Thats why I think some sort of driver might be missing, but I don't know how to fix that.

branden7 said:
Yes. when I do that it makes windows see my device, but windows does not know what my device is. Thats why I think some sort of driver might be missing, but I don't know how to fix that.
Click to expand...
Click to collapse
So... with the RNDIS checkbox UNCHECKED and your FIREWALL OFF, you get the USB Device not recognized error? In that case, ENABLE it and look at these other settings:
1. In the PPC open ActiveSync, then select Connections... from the menu and make sure the Synchroinize ALL PC's using this connection: USB option is checked.
2. In Windows (XP) check your ActiveSync connection settings (see image).
3. Did you try the AS 4.5 Connection Trouble Shooter?
4. You should also try another computer, just to double-check.
There is no driver to make AS work, AFAIK. Question: What happens when the RNDIS checkbox is enabled? Does Windows report an error or simply doesn't connect?

Tried all of those things, still device not recognized. I do need to try another computer but unfortunatly do not have access to one.
When i click that RNDIS checkbox nothing of interest happens. If it's clicked on when i connect windows very briefly see's the device (although it's not recongized) and then the little symbol for unknown device on my taskbar dissapears. If I then click it off windows will again see the device and the little symbol on my taskbar reappears, but it still doesn't recongnize the device.

Wow. That's a strange problem you have there. At this point, it could be a hardware issue. You could try installing WM5Storage or CardExport just to check if the USB hardware is working (bad cable?). Also, try checking your PPC registry, specifically, HKLM\Drivers\Usb\FunctionDrivers. It should look similar to mine (see pictures attached). I believe these keys tell Windows what to do with the device when connected thru USB. Other than that, try a flashing a new ROM from the SD Card, something like VP3G's which is known to work correctly.

Branden,
I have this problem from time to time. My solution is as follows: make sure the usb cable is connected to both the phone and the computer, even though you are getting the unrecognised error message.
Reboot the phone (soft reset) while still attached to the usb cable. Do not rush anything. Input any unlock passwords when prompted by the system but be aware that booting up can be slow, so give it time.
Once the phone has booted up you should then see activesync kick in. You may have to try this several times before it works but it always works for me.
One thing I would advise is to disable/deinstall any auto locking software, eg S2U2. These tend to kick in on long synchronisations and throw the usb status out.
Hope this helps.
WB

Hi! You didn't by any changeuse memmaid or something to clean up the notification queue? (if this sounds like gibberish, you probably didn't) Let me know!
branden7 said:
Tried all of those things, still device not recognized. I do need to try another computer but unfortunatly do not have access to one.
When i click that RNDIS checkbox nothing of interest happens. If it's clicked on when i connect windows very briefly see's the device (although it's not recongized) and then the little symbol for unknown device on my taskbar dissapears. If I then click it off windows will again see the device and the little symbol on my taskbar reappears, but it still doesn't recongnize the device.
Click to expand...
Click to collapse

Same Problem
Just to let you know your not alone ...
I am having the Exact same problem at the moment .... fortunately i do have access to another PC ... My Laptop connects to it with no problems what so ever .... so it obviously is a PC issue and not a Phone issue
I too have tried all the currently posted attempts at a solution to fix it but so far nothing has worked ... i am beggining to think that i may have to do a fresh intall of XP and that would Phiss me off
So any further suggestions would be doubley appreciated

Tried everything mentioned since my last post and still nothing. Also I am now getting the white screen issue again (Which I fixed originally by buying another hermes that had a crushed usb port and swapping the screens out). I think I may be about ready to move on to another phone as this is now my third major problem with this model of phone (although one of the problems may be an issue with XP).

I had the same problem. I updated my WM5 to WM6....and it stoped syncing with my computer. Went back to exchange it. Later, I learned it wasn't the problem with the phone syncing.....here's how you can fix the problem.
Click on Start>Settings>Connection Tab>USB to PC
Uncheck "Enable advanced network functionality"
Click on "ok"
I just upgraded to wm6 again and followed these steps....now it syns fine.
It worked for me.....hopefully it will work for you.
Peace

[Q]ActiveSync 4.5 Synchronization cannot be completed successfully

Hi All,
I am new to ELF i.e. HTC touch
I was expecting somebody knows the solution for my problem
Problem: I have HTC Touch (Black one) P3450 from last few days while I
connect my device to PC i am getting
below error message.
error: "Synchronization cannot be completed successfully. Reconnect
your device and try again. If the problem persists, see the Microsoft
ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop
computer."
I had restarted my device many time also I had reinstall
but as the relationship between PC and Mobile device is not identified
it will giving me above error.
i had tried to find out <PROGRAMS> then <FILE EXPLORER> then <WINDOWS> then to the <TEMP> folder but I didn;t find it out on my device. Please help me in this regards.
More interesting is when I connect my device to pc the ActiceSyc 4.5 start but not able to sync, pup up with above error.
but I can clikc on explore button on Activesyc window to navigate.
Please help urgent
cheer's
Sandi

Saisan said:
Hi All,
I am new to ELF i.e. HTC touch
I was expecting somebody knows the solution for my problem
Problem: I have HTC Touch (Black one) P3450 from last few days while I
connect my device to PC i am getting
below error message.
error: "Synchronization cannot be completed successfully. Reconnect
your device and try again. If the problem persists, see the Microsoft
ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop
computer."
I had restarted my device many time also I had reinstall
but as the relationship between PC and Mobile device is not identified
it will giving me above error.
i had tried to find out <PROGRAMS> then <FILE EXPLORER> then <WINDOWS> then to the <TEMP> folder but I didn;t find it out on my device. Please help me in this regards.
More interesting is when I connect my device to pc the ActiceSyc 4.5 start but not able to sync, pup up with above error.
but I can clikc on explore button on Activesyc window to navigate.
Please help urgent
cheer's
Sandi
Click to expand...
Click to collapse
Any update on this....
urgent....

First of all, not being able to find your device is 'normal' ... until you've made an activesync connection, you won't see your device.
Now, for your activesync problem, do you see an error code? Like 80004005 or 80006007?
It's a pretty common problem for activesync, but from my experience it seems to pop its ugly head a lot more often for WM6 devices than the older OS, like the 'tried and tested' WM2003SE platform.
There could be many causes for this. I'd suggest going through the following steps to try to fix it:
1. Disable all the items under Option (calender, contacts, notes, everything) and see if it can be connected via Activesync. If it can't, you're really screwed ... go to step 5
2. Disconnect your phone, and close Outlook on your PC. Now find scanpst.exe on your PC (installed with Outlook) and run it to scan and fix your .pst file.
3. Re-connect your phone, now add the options 1 by 1. I'd start with Notes, then contacts and calender. See if running scanpst.exe fixes the problem. If you're luck, you could be out of the woods by now.
4. If you get the same error after adding a particular item in option, that help you isolate where the problem is. Look at the entries in that item (calender, contact, notes etc) and see if there's anything that casues the problem. Relocate the items if necessary and add them 1 by 1.
5. If everything fails, or if you don't even care about the programs you've installed on the phone, just do a hard-reset (hold down green + red button at the same time, poke the reset button while still holding down the buttons, and press "select" when the messge appears on screen) and connect the phone to the PC and see if it syncs. If your phone can't even sync fresh after a hard-reset, send the phone back for repair.
I know from my experience, moving the contacts and adding them 1 by 1 got me out of the woods 1 time, and the other time I had to do a hard-reset ... good thing I backup my device weekly.
Good luck!

My bet is that you have a bad USB cable.
I have definitely seen the exact error messages and problems you describe with a HTC Universal.

number16 said:
First of all, not being able to find your device is 'normal' ... until you've made an activesync connection, you won't see your device.
Now, for your activesync problem, do you see an error code? Like 80004005 or 80006007?
It's a pretty common problem for activesync, but from my experience it seems to pop its ugly head a lot more often for WM6 devices than the older OS, like the 'tried and tested' WM2003SE platform.
There could be many causes for this. I'd suggest going through the following steps to try to fix it:
1. Disable all the items under Option (calender, contacts, notes, everything) and see if it can be connected via Activesync. If it can't, you're really screwed ... go to step 5
2. Disconnect your phone, and close Outlook on your PC. Now find scanpst.exe on your PC (installed with Outlook) and run it to scan and fix your .pst file.
3. Re-connect your phone, now add the options 1 by 1. I'd start with Notes, then contacts and calender. See if running scanpst.exe fixes the problem. If you're luck, you could be out of the woods by now.
4. If you get the same error after adding a particular item in option, that help you isolate where the problem is. Look at the entries in that item (calender, contact, notes etc) and see if there's anything that casues the problem. Relocate the items if necessary and add them 1 by 1.
5. If everything fails, or if you don't even care about the programs you've installed on the phone, just do a hard-reset (hold down green + red button at the same time, poke the reset button while still holding down the buttons, and press "select" when the messge appears on screen) and connect the phone to the PC and see if it syncs. If your phone can't even sync fresh after a hard-reset, send the phone back for repair.
I know from my experience, moving the contacts and adding them 1 by 1 got me out of the woods 1 time, and the other time I had to do a hard-reset ... good thing I backup my device weekly.
Good luck!
Click to expand...
Click to collapse
Hi number 16,
Could you tell me where exactly are located the *pst. files? When I try to run scanpst.exe, it tells me to browse to the respective file, but I can't find it.
Thanks a lot.

The .pst file is the Outlook data file. Close outlook first, and right click on the icon to go to "Properties". From there you can see the location of your current .pst file location.

number16 said:
First of all, not being able to find your device is 'normal' ... until you've made an activesync connection, you won't see your device.
Now, for your activesync problem, do you see an error code? Like 80004005 or 80006007?
It's a pretty common problem for activesync, but from my experience it seems to pop its ugly head a lot more often for WM6 devices than the older OS, like the 'tried and tested' WM2003SE platform.
There could be many causes for this. I'd suggest going through the following steps to try to fix it:
1. Disable all the items under Option (calender, contacts, notes, everything) and see if it can be connected via Activesync. If it can't, you're really screwed ... go to step 5
2. Disconnect your phone, and close Outlook on your PC. Now find scanpst.exe on your PC (installed with Outlook) and run it to scan and fix your .pst file.
3. Re-connect your phone, now add the options 1 by 1. I'd start with Notes, then contacts and calender. See if running scanpst.exe fixes the problem. If you're luck, you could be out of the woods by now.
4. If you get the same error after adding a particular item in option, that help you isolate where the problem is. Look at the entries in that item (calender, contact, notes etc) and see if there's anything that casues the problem. Relocate the items if necessary and add them 1 by 1.
5. If everything fails, or if you don't even care about the programs you've installed on the phone, just do a hard-reset (hold down green + red button at the same time, poke the reset button while still holding down the buttons, and press "select" when the messge appears on screen) and connect the phone to the PC and see if it syncs. If your phone can't even sync fresh after a hard-reset, send the phone back for repair.
I know from my experience, moving the contacts and adding them 1 by 1 got me out of the woods 1 time, and the other time I had to do a hard-reset ... good thing I backup my device weekly.
Good luck!
Click to expand...
Click to collapse
Hi number16
Thanks for your suggestions but I had already tried steps #1 to # 4. After that I had deleted all the relationship.
Now at present I don’t have any relationship for my device to PC.(When I had plug-in my device and tried to sync through ActiveSyc 4.5 it will show me Guest or new name for relationship.)
On some different forum they have some kind of problem there it was suggested to delete the Windows/ Temp folders files so that it will resolve the above problem.
Any think else you would like to suggest.
Hope somebody help me..
Cheer's
Sandi

leondaphillips said:
My bet is that you have a bad USB cable.
I have definitely seen the exact error messages and problems you describe with a HTC Universal.
Click to expand...
Click to collapse
Hi
As I connect my device to PC ActiveSyc was automaticly runs and tried to get relationship but unfortunatly not able to sync.
I am sure my USB Cable is in good condition because I am able to transfer files from Device to PC or vise verse.
any thing else you would like to suggest.
Sandi

Saisan said:
Hi
As I connect my device to PC ActiveSyc was automaticly runs and tried to get relationship but unfortunatly not able to sync.
I am sure my USB Cable is in good condition because I am able to transfer files from Device to PC or vise verse.
any thing else you would like to suggest.
Sandi
Click to expand...
Click to collapse
Have you *tried* another USB cable?
(I know, I know... but a cable that fails to sync can transmit data, I have seen this - it is strange but true).
Also
you may inadvertently have disabled a network connection on your PC. If you connect you should see a network icon showing like it is trying to obtain an ip address. If you disable that by accident it can also prevent connections but I still think you should try a new cable then check your network connections
Yours
Leon

leondaphillips said:
Have you *tried* another USB cable?
(I know, I know... but a cable that fails to sync can transmit data, I have seen this - it is strange but true).
Also
you may inadvertently have disabled a network connection on your PC. If you connect you should see a network icon showing like it is trying to obtain an ip address. If you disable that by accident it can also prevent connections but I still think you should try a new cable then check your network connections
Yours
Leon
Click to expand...
Click to collapse
leondaphillips;
It is something Strange!!! well I will try out this solution hope it will work.
I will let you know in same post.
Cheer's
Sandi

hey i had this problem, turns out my firewall was blocking it, try turning off your firewall.....

Saisan said:
leondaphillips;
It is something Strange!!! well I will try out this solution hope it will work.
I will let you know in same post.
Cheer's
Sandi
Click to expand...
Click to collapse
Hi leondaphillips
I had tried to connect my device with new*** USB Cable.
but same thing happened it was showing same error message.
Also can;t create relationship.
help is required urently
Sandi

cones said:
hey i had this problem, turns out my firewall was blocking it, try turning off your firewall.....
Click to expand...
Click to collapse
hi cones
I had checked with Windows Firewall it shows me status OFF.
Is there were anything else I need to check?
what you exactly did when you have this problem? how it resolved can you explain on this?
Waiting for your post.
Sandi

Hey Sandi!
Have you tried unchecking the option under Settings\(System or Connection)\Usb to PC ?
Also, have you looked the pins of the miniUSB port? Are they in good shape?
Regards!

kokotas said:
Hey Sandi!
Have you tried unchecking the option under Settings\(System or Connection)\Usb to PC ?
Also, have you looked the pins of the miniUSB port? Are they in good shape?
Regards!
Click to expand...
Click to collapse
Hi kokotas
Thanks for your reply.
well I had checked below things.
under Settings\(System or Connection)\Usb to PC = checked status.
I had took new *** USB Cable*** and tried to reconect but it won;t work out.
now I am worried I am unable to syn my device to my PC.
Uregent help required.
Sandi

1. Try:
Under Settings\(System or Connection)\Usb to PC = UNCHECKED status.
2. So you've tried a new cable and nothing changed! But I told you about the miniUSB port in your phone! Do you see any broken, twisted pins in there? I'm telling you this because I had my phone's pins broken and I have no connectivity via usb anymore!
Regards!

One final thought
Hi Saisan
I would counsel that you should try another PC first.
Next step:
Unplug your device...
Uninstall Activesync, remove the registry keys for the program and reboot. Download the latest release of ActiveSync and install that.
I would also suggest you could do worse than enable "SHOW_HIDDEN_DEVICES" in device manager and remove all greyed out items under USB in device manager (WITH YOUR DEVICE NOT ATTACHED) then reboot and reconnect your device.
Failing that you probably have either a connectivity issue (physical cables or connectors) or you have a logical connection issue (I think there is a possiblity that you have inadvertantly disabled a network connection).
When you connect a WM6 device it creates a new network connection which generally appears in the system tray. If you disable this (right click disable) active sync will stop working.
If you go into your network connections folder and re-enable any items that are disabled it should work. PROVIDED YOU HAVE TURNED OFF WINDOWS FIREWALL FIRST...
It does sound like a physical cable or connection problem though.
Hope that helps
Yours
Leon

kokotas said:
1. Try:
Under Settings\(System or Connection)\Usb to PC = UNCHECKED status.
2. So you've tried a new cable and nothing changed! But I told you about the miniUSB port in your phone! Do you see any broken, twisted pins in there? I'm telling you this because I had my phone's pins broken and I have no connectivity via usb anymore!
Regards!
Click to expand...
Click to collapse
hi kokotas
I had goen throught the steps:
Under Settings\(System or Connection)\Usb to PC = unchecked.
and checked the pins are not broken and twisted but unfortunatly it is giveing me same error.
I think I will rediscribe my issue. I am able connect my device but unable to syncronize it .
Problem: I have HTC Touch (Black one) P3450 from last few days while I
connect my device to PC i am getting below error message.
error: "Synchronization cannot be completed successfully. Reconnect
your device and try again. If the problem persists, see the Microsoft
ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop
computer."
I hope now it was clear.
Cheer's
Sandi

leondaphillips said:
Hi Saisan
I would counsel that you should try another PC first.
Next step:
Unplug your device...
Uninstall Activesync, remove the registry keys for the program and reboot. Download the latest release of ActiveSync and install that.
I would also suggest you could do worse than enable "SHOW_HIDDEN_DEVICES" in device manager and remove all greyed out items under USB in device manager (WITH YOUR DEVICE NOT ATTACHED) then reboot and reconnect your device.
Failing that you probably have either a connectivity issue (physical cables or connectors) or you have a logical connection issue (I think there is a possiblity that you have inadvertantly disabled a network connection).
When you connect a WM6 device it creates a new network connection which generally appears in the system tray. If you disable this (right click disable) active sync will stop working.
If you go into your network connections folder and re-enable any items that are disabled it should work. PROVIDED YOU HAVE TURNED OFF WINDOWS FIREWALL FIRST...
It does sound like a physical cable or connection problem though.
Hope that helps
Yours
Leon
Click to expand...
Click to collapse
Hi leon
Thanks for your advice. but I had tried this think already.
I had reinstalled Activesync 4.5 on new machine and tried to get sync.
I think there were some logical connection issue on which I am unable to create the relationship with my device from PC.
I had also tried to delete all the pervious relationship's and reconnected the same.
On some other forum it was suggested to delete the files from Windows/Temp directory from Device. but in HTC Touch when I connect the device it will automatically start activesync and it was connected but not sync.
shows message:
error: "Synchronization cannot be completed successfully. Reconnect
your device and try again. If the problem persists, see the Microsoft
ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop
computer."
please help in this regards.
Cheer's
Sandi

Hi Sandi,
Have you found a solution yet?
I've been facing the same problem for sometime now. Additionally, all files on my touch have become read-only. I can't copy, move or delete any files on the phone.

Connecting to Activesync but not able to Sync

I am having a problem syncing with activesync, and i must think the problem is due to a drop i had the other day. It made the miniUSB port...smaller seemingly, although the cable still fits in (be it very snugly now). i can still charge it in the wall, and it shows "connected" on activesync when plugged into the pc and the amber light comes on every time. However activesync quickly gives me a message that "synchronization cannot be completed successfully, please remove device and try again or open the troubleshooter"
I'm not sure if i should just start to look for a different way to back up files via PIM or others and move on without activesync ...flash using microSD from now on? consider replacing the port (not even sure how much effort that is, or if it's possible yet)
Or is there anything simple i can try that i haven't done yet? TIA
EDIT: I Have tried unistalling and reinstalling Activesync and even dl'd latest version of AS again

How about deleting the sync partnership with ActiveSync, reestablishing the partnership and then seeing if you are able to sync?

have you tried syncing via bluetooth, then at least you would know its the usb port that is the problem, you say the connection is tight when you insert the cable, are you sure that nothing else is lodged in there when you dropped it?

well, it doesn't look like there's anything in there from what i can tell...the metal actually looks bent or mangled just a bit. Unfortunately my lappy does not have BT, so i can't try that. good thought though

Well if i was you i would invest in a bluetooth dongle for your laptop ,that way you should still be able to sync, and flash via sd card. That way you will have the problem sorted to a degree. Have you tried flashing another rom via cable btw. You say it connects via active sync. I would do a backup using spb backup or something similar and reflash the device and see if that fixes the sync issue. Try a cooked rom first, if that doesnt work try an original rom.
The only reason i mention the cooked rom to flash first is that it is quicker

I've had the same problem where active sync wasn't recognizing my phone.....that is until I soft reset'd my phone while still connected to pc...usually works for me.
another solution..on phone goto:
Settings->Connections->USB-to-PC->Advanced Network Functionality
on... I turned it off. I haven't had a random disconnect, nor PC crash.

A soft reset did the trick for me.

Dillsnik said:
Or is there anything simple i can try that i haven't done yet?
Click to expand...
Click to collapse
If you have a card reader, copy this - http://toril.ru/pda/akrndisadd.exe - onto the phone and run it there. It works every time my phone decides to stop talking to the PC.
Geoff

I am having Syncing issues, last night, has been fine until now.
Did all the deleting partnerships etc but to no avail.
The phone sync's fine with my Work PC(XP) but at home(Vista) its not,
the error 0x?????107 (from memory, will update when i get home)

Exact error: 0x86000107

Hi,
I am having a strange problem with Active Sync.
When I plug in my mobile with USB and use active sync. it does not synchornise.
I have tried all the options liek chaning schedule, changing the settings and diabling advanced network functionality still I am not able to make the diamond synchronise.
Finally, I download the active sync. 4.5 even then my problem remains the same.
It always shows the message "connected" and fails to synchronise.
thanks for any help..

connecting to activesync, buy no able to sync
Hello to everyone.
I have the same problem with my new Diamond. It have synced in the passed, but now I get the same 1 error and code 0x00089107. Can anyone help to fix it, please. Many thanks Tori

bigsteve said:
Exact error: 0x86000107
Click to expand...
Click to collapse
I had the same error.
Solution:
Just add this:
[HKEY_CURRENT_USER\Software\Microsoft\Windows CE Services]
"WCESMGR Windowplacement"="0,1,-1,-1,-1,-1,0,0,0,0"
in windows xp registry.
Error is no longer appeared when I connect t32 (WM6) with my pc.

Doing both things in post #6 worked for my TyTN. This trouble started only after I plugged my phone into a Vista laptop to use it as a modem. Gotta love Vista.... (smile)
Thank you for the help, and thank goodness for this forum!

cristiano67 said:
I had the same error.
Solution:
Just add this:
[HKEY_CURRENT_USER\Software\Microsoft\Windows CE Services]
"WCESMGR Windowplacement"="0,1,-1,-1,-1,-1,0,0,0,0"
in windows xp registry.
Error is no longer appeared when I connect t32 (WM6) with my pc.
Click to expand...
Click to collapse
I have Vista Home Premium....

try pluggin your mobile directly into a usb port on the back of your pc and not through a hub
mine did this now it works 100% of the time

bigsteve said:
cristiano67 said:
I had the same error.
Solution:
Just add this:
[HKEY_CURRENT_USER\Software\Microsoft\Windows CE Services]
"WCESMGR Windowplacement"="0,1,-1,-1,-1,-1,0,0,0,0"
in windows xp registry.
Error is no longer appeared when I connect t32 (WM6) with my pc.
Click to expand...
Click to collapse
I have Vista Home Premium....
Click to expand...
Click to collapse
I have Vista Ultimate 64 and I usually resolve this just in the way I posted in this thread http://forum.xda-developers.com/showpost.php?p=2827500&postcount=7
Best Regards