Hi, im having some problems with my 8125. First, WiFi stopped working, dont know why, i cant open the settings for wifi, only for wlan, and when i try to connect via comm manager, it simply doesnt work.
THEN, the usb port broke, so i soldered it back, but apparently sth went wrong, now my device charges, but it wont sync. Im happy with my ROM and my Radio as it is, i mean i could change it but since my phone wont sync i cant, not big deal, i can manage files through the card or BT, but my problem now is that apparently the only way of fixing my WIFI issue is by flashing it, and that i cant do without sync..
any solution for this? tried also wifi apps (wifi monster), to see if they could get it to work, no luck.
jinxie said:
but my problem now is that apparently the only way of fixing my WIFI issue is by flashing it, and that i cant do without sync..
Click to expand...
Click to collapse
in case you want to flash a new rom for your 8125 maybe you can check your wiki for wizards, i think you can flash any rom in bootloader mode where in you can disregard syncing with activesync.... better read more here
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
wish i gave you a little idea that its possible to flash even if there is no activesync connection (the least i know)
enjoy
thanks for the reply, but with sync i meant that the pc wont recognize the device, tried in 3 different computers, 2 vista 1 xp, none of them could recognize the device, 2 of them did in the past. i must have soldered it the wrong way, missed a pin or sth..
so thats the thing, any way to fix my problem without using the usb cable?
Try doing a hard reset, just make sure you back up all your contacts, ringtones, whatever before you do it.
hard reset did the trick.. or thats what i thought. i mean, i did it (lost evth btw), and it worked, first time i turned it on from comm manager, the icon didn change, but it did turn on, checked on settings>connections, and there it was "wifi", great i thought. then, after some hours, dont know, a soft reset, but without adding nor installing ANYTHING, it does not turn on from comm manager anymore, and the wifi settings yet again, GONE! WTF is wrong with this! i mean why the damn "wifi" icon suddenly disappears from the settings menu?
but (sometimes, not always) i am able to turn it on from thw wlan settings, sometimes it has the "wireless" tab, from where i can turn it on by opening some network menu and clicking turn on wifi, but that "wireless" tab does not always show neither.
ill try changing the comm manager and see what happens.. but isnt there some king of shortcut that i could use to acces the [insert nasty, nasty insult here] "wifi" settings???
seems to be working ok with this app http://forum.xda-developers.com/showthread.php?t=299070&highlight=wifi+shortcut
very useful btw, but very heavy too, im looking for sth light that wont use that much storage.. some kind of shortcut or script..
think i found the problem, i mean, not the why, but the what, in registry, the wlan drivers key is missing, HKLM\Software\Drivers, inside there should be a folder "WLAN" with a/some key/s inside, but there isnt such thing in my phone..
Related
was going to upgrade to the new exec ROM today.... except Active sync decided to fail on me.
I'm running 4.1 on windows XP (SP2) and when i connect the exec via USB NOTHING happens at all, the little icon doesn't even go green or anything. i just get two "bum" and "bum, bum" sounds lol
However the LED on the exec does turn orange (the charging mode colour)
any help is much appreciated on how i can resolve this issue.
thanks everyone!
Check your ActiveSync connection settings (file -> connection settings) and make sure USB is enabled.
done that, and it is ticked....
i have also tried reinstaling active sync....
Turn OFF all your firewalls and try it again.
done that too........ followed the whole trouble shooting thing aswell... all in vain...
in the device manger from my desktop, under "network adaptors", "windows-mobile based device" is showed with a yellow circle with an explanation in it. it then states uunder "properties"
"The drivers for this device are not installed. (Code 28 )
To reinstall the drivers for this device, click Reinstall Driver."
The usual reason that ActiveSync has is the firewall. I pull out my WiFi card, disable the firewall, then connect the cable.
Once the unit has been sync'd I can put the firewall back on and get back on the net.
YMMV.
If your firewall wasn't blocking it before, then it might not be this.
quck update. when i coneect now, in the task bar a little bubble apears stating "new hardware found"
then a box appears with "Found new hardware wizard" on it.
i have a similar problem:
when i connect, activesync does recognize and attempt to sync, but when it starts 'looking for changes', it never ends! it keeps on 'looking for changes' for ever, or at least VERY LONG, ending up with an error on my PC saying that synchronisation failed and that i should restart my desktop computer, which doesn't solve thw problem..
with my blueangel i never had this problem, although i was using activesync 4.1 already back then too..
ideas, anyone?
spdfrx said:
i have a similar problem:
when i connect, activesync does recognize and attempt to sync, but when it starts 'looking for changes', it never ends! it keeps on 'looking for changes' for ever, or at least VERY LONG, ending up with an error on my PC saying that synchronisation failed and that i should restart my desktop computer, which doesn't solve thw problem..
with my blueangel i never had this problem, although i was using activesync 4.1 already back then too..
ideas, anyone?
Click to expand...
Click to collapse
i used to get that problem before, it seemed to resolve itself :?
but now nothing happens, not even the swirly motion of the active sync in the taskbar, the LEDs on my exec is the only thing that lets me know its connected. :evil:
This is exactly what I have on my computer too. The only solution for me is to turn OFF windows firewall and all other firewalls I have, then active sync works as it should be. You have to remember to turn OFF all firewalls BEFORE connecting your Universal via USB for it to work. It will not work if you connect the Universal first then shut OFF all firewalls. It has to be the other way around.
Ok i have a simlar problem, but let me explain first:
I upgraded to winmobile2005 on my Himalaya which went well and without a hitch. I was on my parents pc and i active sync' without a problem.
Ive now come home, and i cant sync. It sits there saying 'Retreaving settings...' and just doesnt go any further. Ive soft and hard reset device, checked firewalls etc - no luck.
It has identified the old active sync name, but nothing else. I can explore the device before it crashes after looking though about 5 directories/downloading large files.
How can i remove the old sync information from the device (as i guess this is the issue)?
Cheers for your time,
Sam.
have you tried to delete that partnership?
blofse said:
Ive soft and hard reset device
Sam.
Click to expand...
Click to collapse
If you already "Hard Reset" your device, then whatever information on it has already been erased clean to factory defaults, unless you are restoring from a backup program after the hard reset. Then I suggest you restore to a file prior to performing an active sync connection to your parents' computer.
cktlcmd said:
This is exactly what I have on my computer too. The only solution for me is to turn OFF windows firewall and all other firewalls I have, then active sync works as it should be. You have to remember to turn OFF all firewalls BEFORE connecting your Universal via USB for it to work. It will not work if you connect the Universal first then shut OFF all firewalls. It has to be the other way around.
Click to expand...
Click to collapse
i have turned off all my firewalls... still doesnt work...
budo*85 said:
have you tried to delete that partnership?
Click to expand...
Click to collapse
The partnership doesnt exist on my pc, and isnt listed until i plug it in.
cktlcmd said:
If you already "Hard Reset" your device, then whatever information on it has already been erased clean to factory defaults, unless you are restoring from a backup program after the hard reset. Then I suggest you restore to a file prior to performing an active sync connection to your parents' computer.
Click to expand...
Click to collapse
Well yes it used to do that on WM2003, but it doesnt on this version. And im not using a backup program. Unless the program auto-saves to my storage card in some way? In which case whats the active sync file im looking for?
budo*85 said:
spdfrx said:
i have a similar problem:
when i connect, activesync does recognize and attempt to sync, but when it starts 'looking for changes', it never ends! it keeps on 'looking for changes' for ever, or at least VERY LONG, ending up with an error on my PC saying that synchronisation failed and that i should restart my desktop computer, which doesn't solve thw problem..
with my blueangel i never had this problem, although i was using activesync 4.1 already back then too..
ideas, anyone?
Click to expand...
Click to collapse
i used to get that problem before, it seemed to resolve itself :?
but now nothing happens, not even the swirly motion of the active sync in the taskbar, the LEDs on my exec is the only thing that lets me know its connected. :evil:
Click to expand...
Click to collapse
you're right! it did! (i already had turned firewalls off, i always do, hate them)
and to tbe last poster: are you using activesync 4.1 at your home?
Regarding Firewall
I've posted this earlier in another thread, but I guess it is not bad to post here again
Regards
------------
Thank you for your suggestion, I would however say this "Be Careful", I would NOT turn firewall completely if I were you guys, IF I have doubt that it is due to firewall, I would turn the firewall ONLY for the Universal interface
pls find the steps here
1. Start
2. Settings
3. Control Panel
4. Security Center
5. Windows Firewall icon in the lower part
6. Advanced Tab
7. UNCHECK the Network Connection that represents your Universal
Note,
A. To be sure that you are not disableing firewall on the wrong interface, please rename your Local Area Connection (x) to your Pocket PC device, so then you would know for sure you are dealing with the RIGHT connection (I use SPV M5000), renaming it is very easy, right click on the connection in the NETWORK CONNECTIONS, then RENAME
B. Disabling firewall for all connections IS VERY DANGEROUS especially IF YOU ARE ONLINE or ON A NETWORK, you might get SERIOUS problems, from viral infections to Hacking (only God knows)
C. The above applies only for WINDOWS FIREWALL on Windows XP Service Pack 2, I have no idea how to do it with Zone Alarm or ANY other software as I dont use any, but I think there must be someway to do so.
All the best & good luck.
spdfrx said:
and to tbe last poster: are you using activesync 4.1 at your home?
Click to expand...
Click to collapse
Yes, both locations have v 4.1 installed. Does no one know of the files i should be removing on my PDA then? :S
Blofse : there are no files to remove - you've already said that you've done a hard reset and returned it to the factory settings which removes all user data and therefore, the device has nothing on it at all about partnerships with computers - i would suggest looking elsewhere for a resolution.
Budo : I think your problem is the yellow symbol on the network card entry in device manager. In this case, I would unplug the exec, righht click on this network card entry and click remove. Then uninstall activesync. Make sure the actve sync folder is deleted and check the windows\system32 folder for files called rapi.dll and ceutil.dll (these might have gone during the uninstall, but check anyway).
Reboot your PC and reinstall activesync before plugging in your exec again.
Hopefully, this will sort you out but post back if it doesn't.
Cheers,
Smiffy.
Activesync just keeps trying to connect and is never successful. I have re-installed Activesync on my pc but it didn't help. Also, my work pc doesn't connect either. Definately a problem with my 8125. All has been well for a couple months and I have added no new software before the problem started. This problem also happened about two weeks after I got the phone and the only resolution was a hard reset. What a pain reinstalling all the software and settings I have now, it's customized just the way I like it. Anyone know how to re-install Activesync on JUST the phone or have any other ideas?
Try the latest activesync 4.2 beta and disable any firewalls if possible on the pc. On the device start activesync application and go to menu\options - delete pc that you are syncing with and try again.
Deleted profiles on both pcs installed beta on one. Still no connecting. Tried clicking SYNC on phone, pauses for a second then nada. No connection.
Have you deleted profiles on the device? and disable firewalls, and if you have a network adapter enable it because latest activesync treats the connection with device as a network - there are many posts on this issue do a search and read through some - seem to be many different factors involved.
First- Thanks for the replies Mark
I removed the PC profiles from my 8125. Also reinstalled Activesync 4.2 on my work pc. Nothing. Although this time I got an error message- Cannot find the file "http://go.microsoft.com/fwlink/?linkid=65257&clcid=0x409" (or one of its components) Make sure the path and filename are correct and that all libraries are available". Like I would know what that means. Anyways, no firewall enabled. Besides, this should not be happening, all of a sudden, on 2 separate pcs. That kinda rules out a pc problem. It has to be in the phone. That, and the fact that a hard reset fixed it last time. I'm thinking something corrupted in Activesync on the phone???
And searching on this forum is useless. I type in "connecting Activesync" and every post with either word shows up. 614 in just Wizard forums alone. Is there a way to search so that ONLY posts with both words show up? That way I can modify my wording until I find something useful. Search for any terms or use query as entered is ticked. On other forums you can just use quotation marks but not this one. It makes searching very difficult. ROB
Oh, and yes my network adapters are still enabled as always.
Yes best to search with the word AND cuts out all the other stuff i.e. activesync AND connection would do it. Yep sounds like it may be the device.
found couple of posts that seem to be relevant
http://forum.xda-developers.com/viewtopic.php?t=41955
http://forum.xda-developers.com/viewtopic.php?t=44182
http://forum.xda-developers.com/viewtopic.php?t=49161
http://forum.xda-developers.com/viewtopic.php?t=44574
Happy reading, the last post is about connecting activesync via bluetooth so maybe thats an option.
Thanks Mark. I think I may try the bluetooth connection when I get home tonight. Or I may just throw in the towel and do a hard reset. that worked last time. Plus, I can install the latest ROM upgrade. Shame theres no way to uninstall and reinstall Activesync on the phone. Seems that should do the trick (maybe). Just tried my friends 8125 on my work pc- syncs just fine. So much for all the pc fixes everyone seems to be trying.
I had the same problem with AS refusing to connect via usb or BT.
In the end i went & purchased (although the demo version would have done) Sprite backup. installed on the PC. Browsed to the install dir to find the cab file. copied to my wizard (wifi, or sd card reader etc).
Insatlled & backed up to SD card
Hard reset
restore
stop here if you're happy, if not
AS to sync calender & contacts to pc
hard reset
update ROM
AS contacts, cal, docs etc back to wizard
install SW & settings
BACKUP
Yep. Had to hard reset. All is working again. Crappy Activesync. What's up with this P.O.S. ? Trying to setup bluetooth now and the pc finds the phone but AS won't connect. The phone finds the pc (HomeCenter) but it shows no services available. I'm assuming that there should be some listed (maybe Activesync?) Guess I'll have to do some searching for bluetooth problems with AS now. Did I mention that AS is a P.O.S??? But you all knew that already. :lol:
Dont forget to open a port in you BT settings (on the pc) and tell AS (also on the pc) to accept connections on that port.
Then your wizard should be able to see the AS service on the pc (you initiate the sync from the phone, not the pc)
I have had this problem since day one, and continue to have it despite several (more than 15) hard resets, multiple ROMs, multiple pertnerships etc. I plug in my PPC USB, and it just says "connecting" forever. Every time, after plugging in my USB, I have to shut off my PPC, and turn it back on. Then my laptop finds and connects with my PPC, and syncs all my data like it should. If I do this more than 3 times, my laptop crashes and reboots. If anyone has figured out how to fix this, let me know.
Hello everybody,
first of all - thank you all: helmi, xplode, all pdaviet guys, and others - you're making magic with BA roms, really thank you.
Please help me, I have an annoying problem: most of the times I try, I can't turn on WLAN. Rarely, somehow I manage to turn it on, but it happens very rarely, and this is driving me crazy.
I don't know whether it is a rom problem, or something else.
I have tried almost all roms available, because i read explode somewhere said that his last rom solved this problem...but nothing.
Something curious: this is the third BA i own, and I saw this problem before, but somehow i could turn WLAN on (I'd press the WLAN icon in comm manager many times, etc.), but on this BA it's just almost impossible to turn WLAN on.
Any ideas, please?
You need to go to the COMM manager, then go to Settings (down the bottom) > WLAN settings.
Then press "Turn on WLAN". If it doesnt come on after that, go back to COMM Manager then press wireless button.
thank you for the advice, but I'm aware of that trick - It does not help.
I used it on other BA's, and it was working, however, on this one it does not (most of the times).
Namely, I would think the WLAN module is simply dead, but then, sometimes, (unfortunately quire rarely) I manage to turn it on with the above procedure - first in comm manager, then settings, "turn wlan on", then comm manager again...
I don't get it, is it the ROM, or just my BA?
i'm using BA_ROM_CE_OS_5.2.19716__Build_19716.1.1.0_PV_DVH__16MB_Ram_16MB_PP as it is the only one that supports the new Wifiv2 driver
Do the search for "dead wlan due to erased eeprom"
Flyboy:
tried, but nothing. reflashed ba with BA_ROM_CE_OS_5.2.19716__Build_19716.1.1.0_PV_DVH__ 16MB, (the version without ram - although I don't understand what's the difference), then cold boot with no yes,yes...), installed wlan v2, but nothing, can't turn wlan on. Thank you anyway...
wit:
hmm...interesting, I assume you meant the hermes subforum topic (Dead wlan due to erased eeprom? *SOLVED*), but it's quite hard to follow, as it is for hermes... Also, posting a question there would not be liked by drummer10630, I mean he's great, helped many people, but for our BA the procedure is not the same, so he couldn't help me...
Anyway thank you all who read this, especially for your much needed help, I appreciate it.
after flash try cold boot with no NO,yes... just format the storage!!!
flyboy, tried that too, but no success.
I think I'll have to give up, I'm depressed.
****.
Bump.
Anyone else had any success stories they can post? I am in the same boat as pooksee1802.
WiFi will turn on, detect the network, go through all the settings but never complete the connection. It will connect maybe once in 20 attempts. It isn't that it simply doesn't work or is definitely broken, its just that it very rarely completes the connection. When it does complete the connection it works fine until the next time you need to connect.
i have the same issue...tried everything...no can do
wifi goes up, find the access point, requesting network key, then it retry connecting till dead by itself
i found a weird thing : whatever I set it to using Open + WEP, after tap "connect", it goes back to WPA-PSK + TKIP thing...
really annoying
Hey guys, i have flashed to a few ROMs in the past and my phone would always give me the trouble of no data connection. My tmobile wing is hard spl and running currently on papa's black diamond. whenever i tried to go to the comm manager to activate the data connection, it just wont turn on while other buttons i have no problem turning on such as wlan and bluetooth.
i've also tried launching internet but it just says there's no data connection and ask me to go to settings. i still can make calls but just completely no data connections. i have also soft resetted it several time and no luck. =/
help would be great!
ps. i've looked up several other threads with the same problem, however, theres really nothing under connections except add new so it didnt help much.
cbbplanet said:
Hey guys, i have flashed to a few ROMs in the past and my phone would always give me the trouble of no data connection. My tmobile wing is hard spl and running currently on papa's black diamond. whenever i tried to go to the comm manager to activate the data connection, it just wont turn on while other buttons i have no problem turning on such as wlan and bluetooth.
i've also tried launching internet but it just says there's no data connection and ask me to go to settings. i still can make calls but just completely no data connections. i have also soft resetted it several time and no luck. =/
help would be great!
ps. i've looked up several other threads with the same problem, however, theres really nothing under connections except add new so it didnt help much.
Click to expand...
Click to collapse
AHHHHHHHHHHHHHHHHHHHHHHHHHHAAAAAAAAAAAAAAAAAAAHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHAAAAAAAAAAAAAAAA!
cbbplanet said:
Hey guys, i have flashed to a few ROMs in the past and my phone would always give me the trouble of no data connection. My tmobile wing is hard spl and running currently on papa's black diamond. whenever i tried to go to the comm manager to activate the data connection, it just wont turn on while other buttons i have no problem turning on such as wlan and bluetooth.
i've also tried launching internet but it just says there's no data connection and ask me to go to settings. i still can make calls but just completely no data connections. i have also soft resetted it several time and no luck. =/
help would be great!
ps. i've looked up several other threads with the same problem, however, theres really nothing under connections except add new so it didnt help much.
Click to expand...
Click to collapse
I think you have to use the Network Wizard. If it is not in that rom, can install it using the cab, it's should be around this forum.
thanks live! but i'm not sure which network wizard cab file works and which doesnt.. so a friend helped me set it up manually. thanks though!!
papamopps said:
AHHHHHHHHHHHHHHHHHHHHHHHHHHAAAAAAAAAAAAAAAAAAAHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHAAAAAAAAAAAAAAAA!
Click to expand...
Click to collapse
What, have you heard that question before?
Ryan
yes my fone is having the same problem and now i cant flash to a new rom
i flashed for the first time yesterday, and had the same problem. just call tmobile and tell them somehow your data connection information has deleted, and they will run u through what to put in the fields. and don't forget to go to the network wizard, to make sure its on the right network.
Same problem except it WAS working (my gprs/edge) until I added my first wlan entry.. of my apartment's wifi which works. But after I was done using it i turned the wlan off from comm manager and expected to see the big E for edge and instead just see the two arrows with the little x under it. I can no longer connect to gprs/edge. If i open the internet explorer to view a page, it flashes a "G" with the arrows like it's trying to connect forever. At that point it will not even let me make or receive calls until I reboot the ppc. Network wizard won't fix it as I've already tried, twice... no change. My data connection for T-mobile is set up already under "connections tab" but it just doesn't work. My best guess is something has gone wrong in the registry... but as much as I've searched for this kind of problem I find nothing... just stuff how to fix wlan problems. btw, i'm on tmobile. Oh, it won't even activesync if my wlan is off now... I have to enable the wlan and let it connect to my home network... and THEN it will go through activesync without error. This is nuts, I already hard resetted once because of this and now it's the same story. Maybe it's just a prob with the opentouch 6.5 nofrills version that's just basic and let's the users add their own apps.
.. and still cant get an answer.
Without wifi the device is useless to me.
I can see the networks, just not connect to anything.
I have the latest radio.
It worked on first setup but after restart ive lost the ability to connect.
Somoene mentioned that the MAC address is assigned randomly each time the device restarts which seems very odd.
Does anyone know of a fix for this before I give up and go back to 6.5?
This forum is becoming incredibly difficult to find information!
Same thing hapened to me...after unlocking, modifying registry and activating the phone, wi-fi stopped working. It sees the network...very good signal, but it says that it can't reach it...I tried a few restarts, but nothing. Hope somebody will fix this....thanks in advance
Will I be able to use the same activation key again if I reset the phone from settings/about ? I mean....I could try this to see if the the unlocking or the registry modification caused this...
This happened to me, too. It started working after I pulled the battery and went through the new phone setup thing.
xandercom said:
.. and still cant get an answer.
Without wifi the device is useless to me.
I can see the networks, just not connect to anything.
I have the latest radio.
It worked on first setup but after restart ive lost the ability to connect.
Somoene mentioned that the MAC address is assigned randomly each time the device restarts which seems very odd.
Does anyone know of a fix for this before I give up and go back to 6.5?
This forum is becoming incredibly difficult to find information!
Click to expand...
Click to collapse
turn off the device, take off your micro sd and turn on the device. you'll see that all your settings and customizations are gone. turn off the device again, put back your sd card and turn on the device. NOW you should be able to connect to wifi access points!
yeah I know, it sounds weird but it worked for me..