Hi !
I installed the GPS-enabled ROM - and via RegistryEditor the GPS Icon in the Control Panel.
But when I install TomTom it doesn`t display the build-in GPS Receiver.
So I installed the TomTom Update for PocketPCs - then - the built-in GPS receiver is there - but TomTom is updated in a way that I have to
activate the maps again -
Is there a way to use the GPS-receiver for TomTom - but without updating TomTom - respectively activate the maps again ??
thx
hans
lomex said:
Hi !
I installed the GPS-enabled ROM - and via RegistryEditor the GPS Icon in the Control Panel.
But when I install TomTom it doesn`t display the build-in GPS Receiver.
So I installed the TomTom Update for PocketPCs - then - the built-in GPS receiver is there - but TomTom is updated in a way that I have to
activate the maps again -
Is there a way to use the GPS-receiver for TomTom - but without updating TomTom - respectively activate the maps again ??
thx
hans
Click to expand...
Click to collapse
If you activated your maps with the "old" version of tomtom, it should be no problem to activate them again with the "new" version, should it?
But you can use the GPS with the "old" version, you just have to select "other NMEA" and it will work...
tomtom hangs - with NMEA GPS
Hi !
I tried to...
I selected "other NMEA GPS" - 115000 bauds - COM9...
then I have to agree to the terms...after pressing "I AGREEE" it hangs and closes the application.
does anyone have an idea ??
thx
hans
lomex said:
Hi !
I tried to...
I selected "other NMEA GPS" - 115000 bauds - COM9...
then I have to agree to the terms...after pressing "I AGREEE" it hangs and closes the application.
does anyone have an idea ??
thx
hans
Click to expand...
Click to collapse
And exactly HOW LEGAL is your copy of TomTom , and which version exactly are u using ?
I'm using v6.030 and it works without any quirks...
there's an update on TomTom's website for the HTC P3600/Trinity...i installed it and that solved my problem. you can also search xda-developers for a link to the cab file. hope this helps.
Related
Hi !
I installed the GPS-enabled ROM from the HTC Homepage - and TomTom 6 for Pocket PC - not the Trial Version from the HTC Homepage.
but when configuring the GPS receiver - I can not find any build-in device..
It`s only "other GPS receiver", Bluetooth-GPS receiver and so on.
could you please help me ???
thx
hans
Read other threads...
There are a lot of threads about GPS and TomTom
go to the TomTom site and look for the PocketPC upgrade that is specific to the HTC devices. it will upgrade TomTom so you can select the internal GPS receiver. for now, you can also use the "Other NMEA" device.
maps ?
Hi !
thanks !
I installed my TomTom6 Version - and downloaded the Plugin for the HTC device.
But I had to install this TomTomHome Software in order to install this plugin.
but when I want to configure TomTom it tells me that I could download
one map for free..
BUT I want to use my existing "Western Europe" maps.
I copied them to "My Documents" - but it doesn`t recognise it...
Could you please tell me how I could re-use me TomTom6 maps.
thx
hans
Put the map folder back in the memory card root
I need help!
I can install Garmin XT in HTC Diamond but it didn´t work.
When I try to configure the com port it returns to "none".
select GPS Intermediate Driver instead of a COM port.
The problem is with the GPS hardware port, not with the program port, in HW port can find only com ports.
i have it set to "Use serial GPS" and there are COM4 and COM7 (COM7 is BT)..and when it's set, it shows "COM:4 COM4:"
Garmin GT
Yes, you can install and use Garmin on your HTC Diamond. I'm using this GPS sw. You need to "crack" the sw, and get a serial associated to you device.. I will try to put a doc next weekend (in spanish.. sorry) to install and use de sw..Be patience
The answer is: turn off A-GPS, the GPS with Garmin XT works well now
bujucito said:
I need help!
I can install Garmin XT in HTC Diamond but it didn´t work.
When I try to configure the com port it returns to "none".
Click to expand...
Click to collapse
Install Franson gpsgate.This will help.
jrecabarren said:
Yes, you can install and use Garmin on your HTC Diamond. I'm using this GPS sw. You need to "crack" the sw, and get a serial associated to you device.. I will try to put a doc next weekend (in spanish.. sorry) to install and use de sw..Be patience
Click to expand...
Click to collapse
this is not warez forum
//nortonnc: have you solved your problem?
I dont need gpsgate anymore because i own legally purchased maps and in this case garmin works with no problem .But i think new Garmin mobile xt V5 work also without garmin gps reciever on Diamond.
I have same problem too, I already installed garmin+map, but it always show searching for satellites, nothing happen, how to config the garmin? and is there any config needed from the phone? plase the answer, thanks.
sorry for my bad english.
hi, i no that the x1 does not have a built in GPS.
but i have seen videos where ppl actually use it as a gps.
maybe they install sum sort of application into the phone?
can any1 please explain how does GPS work on the x1?
THanks alot, any information is greatly appreciated...
X1 has built-in GPS so you can use Tom-Tom, Garmin, iGo, ...
Just install the program (garmin, tomtom, iGo or something else for windows mobile). If you won't be able to connect with GPS satellite just do the hard reset on the phone. Than go to Quick GPS in your programs and download the latest gps positions.
ugotproblemz said:
can any1 please explain how does GPS work on the x1?
Click to expand...
Click to collapse
Wow sounds like someone just got the X1 out of the box.
1. Go to Start > Settings > System > GPS Settings (or something with GPS)
There you can select what COM port the GPS chipset will use to communicate with the OS or any other software.
2. Use the "HTC GPS tool" to see if you get GPS signals outdoors. http://forum.xda-developers.com/showthread.php?t=360477
The X1 doesn't come with any GPS applications installed, but you can add a number of other programs that use the GPS facility.
For example, you can install TomTom Navigator 7, Garmin Mobile 20 or iGo8 for turn-based car satnav.
Or you can use the phone as a GPS locator for something like Geocaching (GPS based treasure hunts). GCz2 / Geocaching
Or you can use Google Maps to find out where you are and let your friends know with Latitude. Google Maps with Latitude
Or you can use the GPS facility to "geotag" photos, that is embed the location where the picture was taken inside the image data. Footprints
so is it normal that when using google map, i cant find any satellite??
if you enabled gps in googlemaps
and of cause stand outside as gps generally don't work in doors
only outside and in cars and the likes
hello....can anyone help me...i hav HTC TOuch 2 (T3333) internal GPS, but i can't activate GPS, how to activate it?
ur GPS IS activated , but u need a program which uses it ! it is mapped to port 4 and baud rate could be 57000. what do u want to use it for ? navigation ? get iGO8 or TomTom
LtBlue said:
ur GPS IS activated , but u need a program which uses it ! it is mapped to port 4 and baud rate could be 57000. what do u want to use it for ? navigation ? get iGO8 or TomTom
Click to expand...
Click to collapse
i has try igo8 but always eror in first instalation T_T
how to set baud rate?
in tab hardware?every i'm change baud / port after clik OK (to save i think), on hardware tab port back to (none) and baud rate back to 4800
:O could u be more precise ?! anyone else understood and have a solution ? make settings only in iGO , the phone itself is alredy OK !
1. find QuickGPS from Start manu, click and download a loccation file
2. use Google Map, and 'enable GPS'
3. under clear sky, and allow time for first time connection
4. if no luck, try a hard reset to factory default and try above again
GPS with other programs
the internal GPS is working only with google map but when i try to download free gps applications or do my own, it doesn't retrieve any values.. what's going on ?
sherifsurf said:
the internal GPS is working only with google map but when i try to download free gps applications or do my own, it doesn't retrieve any values.. what's going on ?
Click to expand...
Click to collapse
Hi, go to Start -> Settings -> System -> External GPS (or similar, got a non-English Touch2) and check the settings for GPS.
Use this settings in your programs/apps, then it should work.
Hope this helps,
Greets,
Touch2er
hi i have the same problem , i used Garmin , and navitel and ozi explorer but none of them seemed to be worked it just works with google map and i think it is cuz of a-gps, what should i do ??? Thanks for the help
I know this is not the real key forum for Navis but I thought I give it a try as my prob could be related with the OS.
And I know this device is not in the compatibility list for TomTom Navigator 7 but usually the TT Navi7 works on Win 5 and Win 6 devices.
I have:
- an HP ipaq (model hw6915) with
- Windows Mobile WM 5 (searched this forum for a Win 6 ROM and it looks like some smart guys are currently working on that so I could not yet give it a try with Win 6)
According to the ipaq user manual, the device has this GPS receiver installed:
- GL20000 from Global Locate. In case a manual setting is required for a software, the ipaq manual mentions to set it to COM 7 and a BAUD rate of 57600.
Here is my problem:
I had installed Navigator 6 and it worked fine – but with outdated maps as the new maps require Navigator 7. So after some years of using the old Navigator 6 I installed now the TomTom Navigator 7.917.9186 plus the recent Europe 2GB maps.
The new Navigator 7software starts fine and accepts the new map, but it does not recognize the internal GPS antenna. I receive the message “no GPS devide”. Then I tried a bit and switched (in TomTom Navigator settings) from the “internal” to “other NMEA GPS receiver” and tried different Baud rates. With this setting the Navigator does receive GPS signal – once in a while (1 signal about every minute – just enough to locate the current position but not enough to really navigate).
So obviously the Navigator 7.x does not get correct GPS signals from the built-in antenna (while the older Navigator 6 always did).
Oh and I tried a free utility called GPS Proxy, which copies GPS signals from the inernal antenna to another (virtual) COM port, and I configured TT Navigator 7 to read out from that virtual COM port the GPS proxy is sending its data to. No success.
Any idea how to solve that problem?
Once again, I know this is not the right forum for Navigation software but I thought I give it a try....
sometimes ago on my hw6915 i used the 7.910 version without problems.
try to use this version.
regards,
Sold
Thanks Soldato. Tried the the 7.910 version again but same result - except that in addition to the problem the phone´s speaker gets de-activated. Somehow this speaker problem can be overcome by deleting/replacing a certain file in the Windows folder (I had tried the 7.910 version already half a year ago and I found out how to switch on the speaker but forgot what I did....)
Hmm. Also no loader or converter etc. seems to exist that would allow using the newer TT maps with the older (but working) Navigator 6 software.
Looks like I will keep my ipaq hw6915 in the box for a while till a GPS-supporting WM 6 version can be found.
i can try!!
can u send your tomtom soft, n charts, i have hw6915
i'll try them up for ya n give you a hint!!
[email protected]
Sure I will mail it, but its nothing fancy. You can find the corresponding TomTom Navigator software everywhere on the web.
Does TT 7 work on your hw 6915?
dpr said:
Sure I will mail it, but its nothing fancy. You can find the corresponding TomTom Navigator software everywhere on the web.
Does TT 7 work on your hw 6915?
Click to expand...
Click to collapse
yes it works but you have to delete btcoreif.dll before starting tt7 and do a soft reset
dreamH6 said:
yes it works but you have to delete btcoreif.dll before starting tt7 and do a soft reset
Click to expand...
Click to collapse
Thanks dreamH6!
Ähm sorry if I might look stupid, but how can I delete a single dll file from the Windows folder? I tried in Active Sync and directly from the ipaq file explorer but can neither replace nor rename nor delete it. And was also not able to change the file parameters.
using file explorer tap on 'show all files' to see the dll or try "total commander" file manager (needed for wm2003se)